Merging Dht Relay improvements into the trunk. These changes should finally make relays functional.
There are still some service changes required to reduce the traffic over relays.
Summary of Changes
---------------------
* Changed the way proxy/relay peers are selected in bdConnection. (needs more work).
* Added LinkType to peer info in p3LinkMgr & rspeers.h interface.
* Added getConnectionType() to p3PeerMgr. This defaults to FRIEND for the moment.
* Provide information about Bandwidth, Transport and Peer Type via LinkType().
* Added RateCap() to limit traffic over Relay connections.
* Set Internal Rate to 75% of Relay Limit to account for transport overhead.
* Added various #include "util/rswin.h" to fix compile errors with standard ssl package.
* Removed Local variables (mConnectProxyAddr, etc) which were hiding Class Variables.
* Cleaned up bits in pqissl.cc and p3linkmgr.cc
* Increased UDP Relay Packet size (max transport of 1400 bytes per UDP packet)
* Modified checkRelay() to use Low Pass Filter to calculate Relay Bandwidth.
* Improved udprelay debugging.
* increased (x2) Relay Lifetimes - this is so that enough useful data can be transported (1meg).
* Added LOCALNET_TESTING code to rsinit.cc. This allows Port Restrictions to simulate firewalls.
* more debugging and minor bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Disabled lots of debugging.
* Disabled LOCAL test mode in udpstunner, rsinit
* Enabled BadPeer checking in bitdht.
* Restored normal timeout periods for connection attempts.
* Restored normal connection levels for dht status.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4779 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved Relay Status Output & print when checkRelay() is called.
* initialise timer variable (mMinuteTS) - was causing checkRelay to never be called.
* switched to 10 second calling of checkRelay().
* Increased RELAY lifetimes (x2). now GENERAL = 1 hr, so they can at least transfer 1 meg (minimum block size)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4777 b45a01b8-16f6-495d-af2f-9b41ad6348cc
of the overhead associated with TCP and Relay connections:
* The Internal rate is calculated based on transmitted data (a reliable stream).
* The Relay rate is calculated at UDP packet level and is x1.1 - x1.2 higher than internal rate.
The Relay will drop the connection if peers exceed specified level - so best to leave some head room.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4773 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Adding more detailed flags to each connection.
* Cleaned up unneeded stuff from p3LinkMgr.
* Added rswin.h includes before openssl - allows compilation using std Win OpenSSL.
* Added getConnectFlags() to Net Base.
* removed net_attempt and associated obsolete variables from pqissl
* Made NetBinInterface protected in pqiperson (is this okay?)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4767 b45a01b8-16f6-495d-af2f-9b41ad6348cc
NB: Reverse Most of these changes - before adding to Trunk!!!!
* Added missing BitDht callback functions for test/example code.
* Switch tests/example to OSX compile.
* DISABLE_BAD_PEER_FILTER (as it doesn't like local net)
* Reduced Minimum Peer Counts for DHT to be considered active.
* Added LOCALNET_TESTING to rsinit.cc
- new Commandline Option -R <lport-uport> to restrict UDP ports.
- Enables LocalNet in UdpStunner.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4756 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added generic methods and items for bouncing generic objects through lobbies
- added handling of peer typing status
- proper handling of peer join/leave lobby
- added sub item ids to lobby messages to allow proper message splitting
- made 2 different message splitting methods for normal chat vs. lobbies. In v0.6, we'll have to handle all messages the same way.
- added parent id to RsChatLobbyMsgItem, to allow threaded chat.
- added possibility to make a lobby public/private (not yet fully working)
- added items for requesting/exchanging list of public lobbies at friends' (not yet fully working)
- major cleaning of p3chatservice.cc
Next move:
- gui for listing friend public lobbies, joining them, etc.
- load/save of persistent lobbies.
- autoremove of inactive lobbies
Warning: lobby message items of this version are incompatible with previous versions. It won't crash, but
messages will not pass through.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4755 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added Timeouts for Resolve and QueryIP, as these can continue indefinitely.
- Added more debugging.
- rotated port number using ntohs().
- Filtered Self.
- Allowed Other SSL IDs of Self to connect.
- Fixed QueryIP to use hosttarget instead of servicename.
- fixed Id order in mPeerMgr->addFriend().
- fixed p3ZeroConf initialisation call.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4752 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified UdpRelay handles the counting...
now each Relay Class has a bandwidth limit,
and you can drop down to a lower class - if your one is full.
This ensures that the desired bandwidth is kept, and allows more friends to use the relays.
* Added Interface in p3bitdht.
TODO: Test this stuff!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4728 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- registers oneself, browses and resolves services.
- Lots still TODO:
- parse TxtRecords.
- Track peers.
- feedback to libretroshare
- etc, etc.
Enabled ZeroConf in libretroshare.pro & rsinit.cc. Compiles and runs on OSX.
Added RelayHandler to Dht, to enable external control of Relays.
Marked pqiAssist Interface for changes... will be revamped with ZeroConf.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4727 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Fixed small hangs of RetroShare by removing the core lock in RsServer::ConfigGetDataRates. Is that needed?
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4725 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Summary of changes:
* Switched on Local BadPeer DHT Filter.
- This will remove any peer detected to be spoofing yourself or your friends.
- This list is also shared with you friends. (in Test Mode).
* Added Cleanup of BadPeer Filter.
- Instead of permanent ban, peers are be banned for 6 hours.
- bdManager periodically calls this - which prints out ban list too.
* Added Checks against spoofing to UdpStunner.
- Throw away Stun Results where remote_addr = reported ext_addr.
- Added extra checks to ensure that the same Ext IP is returned, before reporting.
- accept BadPeer List from DHT BadPeer Detection.
* Changed BanList Service Id from Test ID to Real ID.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4718 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added UdpStunner::dropStunPeer() code to remove bad peer from stun list.
* added calls to UdpStunner::dropStunPeer for BanLists going to/from DHT.
* added DEBUG_BANLIST_CONDENSE to remove unnecessary debug.
* Improved UdpStunner::status() print out of stunlist.
* Added extra check to throw away stun reports where remote_addr == reported ext_addr.
- This was causing peers to get the wrong IP addresses.
* Modified UdpStunner ExtAddr checks to make sure the IP addresses match.
* Changed BANLIST service Id to from Test ID to real ID.
NOTE: These are stop-gap methods to avoid the wrong Stun reports.
A more robust scheme must be implemented. I'd expect that it would
involve a strict initial check to establish your IP address...
(e.g. require 4 peers to confirm it, allowing for some fake entries)
After this we can have a weaker check ensuring IP address matches.
If we detect a likely REAL change of IP address - drop back to requiring
a strick check again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4717 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- FT_TM_DOWNLOAD_TIMEOUT: 10 -> 20 secs (RTT limit of 10 secs is too low -> transfers in long tunnels kept switching between active and inactive)
- INACTIVE_CHUNKS_CHECK_DELAY: 60 -> 240 secs (Chunks are kept longer before beign cancelled, which is now affordable)
- MAX_TIME_INACTIVE_REQUEUED: 60 -> 120 secs.(Transfers a kept longer before being re-prioritized in queue)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4707 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Summary Of Changes:
* Reduced Default DHT Message rate from (50msg/sec) => (5msg/sec)
- Searches now take longer, but it should make crappy firewalls happy.
* Added Interface to allow this rate to be dynamically changed.
* Bugfixes for p3BanList: removed internal IPs from Lists, fixed AddBanPeer() logic bug.
* Disabled p3Dsdv, after brief test.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4705 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Full Changes can be extracted from logs associated with the following checkins:
r4674 r4678 r4679 r4680 r4681 r4684 r4686 r4687 r4697 r4698 r4699
Summary of changes:
DHT Improvements:
Added knowledge of Friends / FoFs and Relays to DHT.
Added bdFriendList class to store this information.
Added Checks against known Peer:IP information to detect bad peers.
Bad Peer Checking is in Test Mode Only for the moment,
New Interfaces to exchange above information with libretroshare
Cleaned up various compiler warnings.
libretroshare Improvements:
Added p3BanList Service and DataTypes to exchange Bad Peer information.
Added Plumbing to get info from network to DHT and back.
Supply Friend List from p3LinkMgr
Supply Friend of Friend List from p3Disc.
Added p3Dsdv Service and DataTypes for NetworkWide Routing (Testing Mode).
Various BugFixes.
Patch Manual Forward mode to preserve user selected Port.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4700 b45a01b8-16f6-495d-af2f-9b41ad6348cc
