* Added Anonymous links, stored in configuration file.
* Friends recommendations are also shared anonymously with peers.
* Own recommendations are shared with friends.
* TODO include ranking (+2 <-> -2) in score.
* some bugfixes too.
Added RandomId to p3service file.
Improved forum interface.
Added dummy forum system (not transmitted) for testing.
Switched on new features as well.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@505 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed up Variable Ticking -> max = 1.0 sec now.
* Removed debug output which was massively increasing CPU load.
* Removed some old code from p3face-server.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@461 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched p3Ranking to share Friends Links as well as own.
* Modified rankmsgs to contain source id.
* Fixed up rsNotify, added pqiNotify and global function call to get it.
* Added notify for Bad Incoming Directory
* Added Emergency Incoming directory so RS can keep running.
* Added notify for Bad Packet (connecting to V0.3.X)
* Added notify for Incomplete Packet Read (not been triggered yet!)
* added close() to BinInterface, close on pqissl calls reset()
* removed exit(1) calls from pqistreamer, replaced with bio->close().
* Increased Maximum Packet Size for HTML messages.
* Fixed Online/Offline Message Forwarding. (TEST).
* Increased DHT bootstrap buckets to 4.
* Cleaned up much of serialiser debug (was slowing down Mac)
* Added directory path to File Listings.
* added ConvertSharedFilePath() so correct local dir can be found.
* Added ForceDirectoryCheck() and InDirectoryCheck() for file hashing.
* removed old TMP cache loading.
* switched off Cache debug.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@448 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) xpgp_id to extract the name/id from a certificate.
(2) dht_bootstrap to check the status of the bootstrap peers.
Various bits of code needed to be rearranged to make these utilities possible.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@394 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) A PhotoService / Dialog to share slideshows.
(2) A Network View service, derived from p3disc for a graphical view of peers.
Both of these need a little help to get them fully functional.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@375 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Most of these changes relate to:
(1) rand() is different
(2) sleep() don't exist on Windows.
(3) networking headers are different - these need to be cleaned up in general.
(4) disabled tests that won't compile on Windows.
Will probably have to rollback some of these changes for Unix later.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@372 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added stun bootstrap functionality.
* Added in two temporary StunServers.
* Reconnect attempts are TCP only.
* enabled AUTOCONNECT and TCP Connections.
* reduced UDP keepAlive timer to 15 secs.
* made UPnP the default startup behaviour.
* Removed StunId raw printouts -> now use BinToHex()
* Unified TTLS and PERIODS in p3dhtmgr.h
* DHT bugfix (data not passed to ConnMgr).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@370 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Completed CacheConfig serialisation.
* Switched to Push Cache Mode (faster and more efficient).
* Added CancelCacheTransfer() if we have duplicate HASH / CACHEID.
* Store remote and local caches.
* cleanup all cache directories.
* Broke Cache tests :( - because of dependency of mAuthMgr/mConnMgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@343 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added serialiser types.
* finished streaming on p3ranking.
* removed Bandwidth limitations from BinFile / BinMem.
* added bytecount() to BinInterface.
* moved the CacheTransfer creation to Startup.
* added ranking to CacheStrapper & server tick() system.
* Tweaked LinksDialog for final touches.
* enabled downloads from Messages.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@335 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added sockaddr_clear() function to zero network addresses before use.
* used this function in p3connmgr.
* added htonll() and ntohll() functions to rsnet.h with compile-time ENDIAN checking
* use htonll() and ntohll() in serialiser.
* added net_test.cc to check network/endian/inet_addr issues.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@328 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Major modifications to p3disc to use the new AuthMgr and ConnMgr.
* Modified RsDiscItems to match new p3disc.
* Modified ConnMgr to accept information from p3disc.
* Addition of new Load/Save Certificate From/To Binary to AuthMgr.
* Corrected default build to Linux.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@325 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the serialiser code.
Added serialisation of Key-Value pairs Config message.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@312 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* New external interface for launcher (rsiface/rsgame.h)
* changed pqiservice type Ids from int -> uint32_t.
* added NO_DELETE option to pqistreamer.
* added HASHDATA flag for BinInterfaces
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@301 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This is still a first draft - the message types will surely change.
-corrected ids and added service classes.
-Added disc/msg/chat/cache/file messages
-Extended serialiser to handle service extensions.
-corrected IpAddrPort code.
-More debugging code.
-Added some tests.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@270 b45a01b8-16f6-495d-af2f-9b41ad6348cc
###
### The commented-out examples below are intended to demonstrate
### how to use this file.
### Section for authentication and authorization customizations.
[auth]
### Set store-passwords to 'no' to avoid storing passwords in the
### auth/ area of your config directory. It defaults to 'yes'.
### Note that this option only prevents saving of *new* passwords;
### it doesn't invalidate existing passwords. (To do that, remove
### the cache files by hand as described in the Subversion book.)
# store-passwords = no
### Set store-auth-creds to 'no' to avoid storing any subversion
### credentials in the auth/ area of your config directory.
### It defaults to 'yes'. Note that this option only prevents
### saving of *new* credentials; it doesn't invalidate existing
### caches. (To do that, remove the cache files by hand.)
# store-auth-creds = no
### Section for configuring external helper applications.
[helpers]
### Set editor to the command used to invoke your text editor.
### This will override the environment variables that Subversion
### examines by default to find this information ($EDITOR,
### et al).
# editor-cmd = editor (vi, emacs, notepad, etc.)
### Set diff-cmd to the absolute path of your 'diff' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff implementation.
# diff-cmd = diff_program (diff, gdiff, etc.)
### Set diff3-cmd to the absolute path of your 'diff3' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff3 implementation.
# diff3-cmd = diff3_program (diff3, gdiff3, etc.)
### Set diff3-has-program-arg to 'true' or 'yes' if your 'diff3'
### program accepts the '--diff-program' option.
# diff3-has-program-arg = [true | false]
### Section for configuring tunnel agents.
[tunnels]
### Configure svn protocol tunnel schemes here. By default, only
### the 'ssh' scheme is defined. You can define other schemes to
### be used with 'svn+scheme://hostname/path' URLs. A scheme
### definition is simply a command, optionally prefixed by an
### environment variable name which can override the command if it
### is defined. The command (or environment variable) may contain
### arguments, using standard shell quoting for arguments with
### spaces. The command will be invoked as:
### <command> <hostname> svnserve -t
### (If the URL includes a username, then the hostname will be
### passed to the tunnel agent as <user>@<hostname>.) If the
### built-in ssh scheme were not predefined, it could be defined
### as:
# ssh = $SVN_SSH ssh
### If you wanted to define a new 'rsh' scheme, to be used with
### 'svn+rsh:' URLs, you could do so as follows:
# rsh = rsh
### Or, if you wanted to specify a full path and arguments:
# rsh = /path/to/rsh -l myusername
### On Windows, if you are specifying a full path to a command,
### use a forward slash (/) or a paired backslash (\\) as the
### path separator. A single backslash will be treated as an
### escape for the following character.
### Section for configuring miscelleneous Subversion options.
[miscellany]
### Set global-ignores to a set of whitespace-delimited globs
### which Subversion will ignore in its 'status' output, and
### while importing or adding files and directories.
# global-ignores = *.o *.lo *.la #*# .*.rej *.rej .*~ *~ .#* .DS_Store
### Set log-encoding to the default encoding for log messages
# log-encoding = latin1
### Set use-commit-times to make checkout/update/switch/revert
### put last-committed timestamps on every file touched.
# use-commit-times = yes
### Set no-unlock to prevent 'svn commit' from automatically
### releasing locks on files.
# no-unlock = yes
### Set enable-auto-props to 'yes' to enable automatic properties
### for 'svn add' and 'svn import', it defaults to 'no'.
### Automatic properties are defined in the section 'auto-props'.
# enable-auto-props = yes
### Section for configuring automatic properties.
[auto-props]
### The format of the entries is:
### file-name-pattern = propname[=value][;propname[=value]...]
### The file-name-pattern can contain wildcards (such as '*' and
### '?'). All entries which match will be applied to the file.
### Note that auto-props functionality must be enabled, which
### is typically done by setting the 'enable-auto-props' option.
# *.c = svn:eol-style=native
# *.cpp = svn:eol-style=native
# *.h = svn:eol-style=native
# *.dsp = svn:eol-style=CRLF
# *.dsw = svn:eol-style=CRLF
# *.sh = svn:eol-style=native;svn:executable
# *.txt = svn:eol-style=native
# *.png = svn:mime-type=image/png
# *.jpg = svn:mime-type=image/jpeg
# Makefile = svn:eol-style=native
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@250 b45a01b8-16f6-495d-af2f-9b41ad6348cc
