- added a destructor to RsTunnelDataItem, to remove a memory leak on all data packets.
- apparently the code would allow data items of zero size, hence calling malloc(0), which
has undetermined behavior.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3191 b45a01b8-16f6-495d-af2f-9b41ad6348cc
use for handling the packet: RsItem::DATA_QUEUE for data and RsItem::CONTROL_QUEUE for
control packets, to be used in pqistreamer.
Up to now, File data chunks where the only packets that were going into the --less prioritized--
data queue. Now, the default in RsItem::queueType() being to return CONTROL_QUEUE, developpers can
choose which queue t use by simply overloading this method so that it returns a different value.
The first use of this was to make generic turtle tunnel packets use the data queue instead of
the control queuem, which restores a correct balance between turtle downloads and friends downloads.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3153 b45a01b8-16f6-495d-af2f-9b41ad6348cc
3099: libretroshare/src/tcponudp/udplayer.cc
libretroshare/src/tcponudp/udplayer.h
libretroshare/src/util/rsnet.cc
libretroshare/src/util/rsnet.h
moved operator<<(ostream&,sockaddr_in) to rsnet.h, as it is used at
different places
3100: libretroshare/src/util/rsdiscspace.cc
suppressed debug mode
3101: libretroshare/src/serialiser/rsdiscitems.cc
put correct (i.e. non conservative) size for RsDiscReply packets
3102: libretroshare/src/services/p3disc.cc
Made a pass on the code in p3disc. Corrected some bugs:
- suppressed an unwanted return in packet treatment
- prevented sending info to a peer about itself
- changed askInfoToAllPeers() such as not to discard info
from peers with NODISC flag (because we especially need
info for these)
- enabled receiving p3disc info even if p3discovery is
disabled. Indeed, disabeling p3disc is a measure of
protection, so it should limit the export of p3disc info,
not the import.
- removed test discarding info about dummy friends, because
it is useless
- don't discard info about peers that have the NODISC flag
(meaning that we especially need info for them)
- added safety check about received GPG keys. Before we
relied on this test being performed by
p3ConnMgr::addFriend()
- added some debug info
3103: libretroshare/src/ft/ftcontroller.cc
removed debug info
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3104 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- memory leaks in pqi/cleanupxpgp.cc , 2 new char[] => 2 delete[]
- reordering some constructors' initializing order
- char* myString = "foo" constructs must be prefixed by "const"
- using size_t for variable types when dealing with STL
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3079 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- save msgId in configuration file
- enable previous improvements read/unread state and tags
new function for creating backups of a file
bool createBackup (std::string sFilename, unsigned int nCount = 5);
currently its only available for windows compile. maybe there is a linux developer who change it for linux.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@3064 b45a01b8-16f6-495d-af2f-9b41ad6348cc
2951: cleaned up some desastrous code in rsdiscitems.cc
2952: put back an exit when the local address+port are already in use.
Otherwise this corrupts file lists, config files etc.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2953 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- suppressed old DwlQueue class
- turned mDownloads into a list of pointers to allow easy cross-info update between queue and std::map of downloads
- added queue functionality for moving files top/bottom/up/down
- added the necessary functions in rsFiles
Put back display of exact sizes in FileTransferInfoWidget
Suppressed some warnings.
**Warning**: this commit requires a make clean.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@2493 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- exchange of chunk availability maps from different peers
- correct handling of what is available to which source before asking the data
- correct display of chunks in the progress bars
- generalised the use of compressed chunk maps
- removed the size parameters from the hash search functions
- In addition:
- suppressed a number of per-value transfers of std::string
- improved the FileTransferInfo Widget, to show some additional info
Still to be done:
- chunk map exchange for non anonymous traffic (easy)
- improve accuracy of completion for uploads (for now it's a integer number of chunks)
- check compilation on windows
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1993 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Redesign the udp connection
Remove the rsiface duplicates from retroshare-gui.
Add some randomness in timings for connect manager
Merge branch 'connectionTunneling'
Conflicts:
libretroshare/src/libretroshare.pro
libretroshare/src/pqi/p3connmgr.cc
retroshare-gui/src/RetroShare.pro
retroshare-gui/src/rsiface/rsfiles.h
retroshare-gui/src/rsiface/rstypes.h
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1867 b45a01b8-16f6-495d-af2f-9b41ad6348cc
The side effect is that even when stopped, downloads show the correct downloaded size (up to the size of one chunk).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1865 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- suppressed compatibility with old avatar transmition code
- added code for storing and sending a custom status string (for e.g. saying "I'm not here now") in p3ChatService
- added code for sending group chat status messages "peer is typing". Not fully functionnal yet.
Warnings:
- this commit breaks the compatibility for avatar transmission
- the new avatar transmission is not fully working yet
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1696 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified tlvitems to support future expansions.
* added random tlv test functios.
* added dummy Wide Directory functions to rsdir (for the future;)
* Fixed Mutex Bug in fimonitor.
* added netiface_test for hiberation / net change testing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1620 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- created a subclass for Own item parts, which is compatible with old format.
- suppressed sending of Issuer packets when not using PGP
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1307 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* p3disc now exchanges "Issuer" (pgp) certificates as well.
* additional types for rsdiscitems.h
* Bug Fix for NULL packet in p3service.cc
* allow unauthed SSL certificates to be added in AuthSSL - otherwise cant add new friends!
* only save authed SSL certificates.
* fixed ref/unref of PGP keys in AuthGPG
* added Mutex protection to AuthGPG
* added PGP reloading when key is imported, or signed.
* Fixed PGP key signing.
* added Additional field validLvl to RsPeerDetails.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1270 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Once completed this will allow standard ssl authentication and provide the base for
the openpgp authenticator,
* Tweaks, and removed debug statements.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@1140 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Enabled config in p3file-startup.cc
* Enabled resumeTransfers
* Added new RsFileConfigItem to serialiser.
* extended ftFiMonitor to use Configuration.
* bug fix to add/remove Shared Dirs.
* Increased Channel/forum periods to 3/12 months.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@806 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added TlvShallowClear() to serialisers
* Added RsQueueThread for periodic queue processes.
* Completed ftDataMultiplex which replaces ftServer/ClientModules.
* Added Server Queue / Thread to ftDataMultiplex.
* Added ftdataplextest to exercise ftDataMultiplex.
* Generalised ftFileSearch to handle an array of ftSearch classes.
* Tweaked rsfiles.h #defines to match new ftFileSearch scheme.
* Added Generic ftData Interfaces for Testing.
* added ftDataSend/Recv Interfaces to ftServer + ftDataMultiplex respectively.
* Completed much of ftServer (External Interface), but not yet done.
* Extra debugging and small changes to ftExtraList
* Integrated new ftTransferModule with minor interface changes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@660 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added new tlv type rstlvwide key value pair for internationalisation
* profile interface method not fully implemented yet
* blog methods implemented
* added extra constructor to facilitate extensibility (rename packet
type)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@625 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Addition of channels serialiser.
* New channels interface.
* Added Channels to startup code.
* New CFG Id for serialiser.
* Cleanup of old channels stuff from interfaces.
* Cleanup of messages as well.
* Changed file size to uint64_t
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@620 b45a01b8-16f6-495d-af2f-9b41ad6348cc
*final modifications to qblog network messages: might need to consider
wstring for profile kvsets tho
*update qblog core to hanldle messages
*updated interface with all methods we will ever need hopefully
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@614 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Forum ID to configuration Manager.
* added proper startup for p3Forums.
* updated forums/distrib interfaces.
* Switch Auto-Login on by default.
* switched out lots of debugging.
* add RM libretroshare.a to top-level Makefile.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@594 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Services which are being designed / tested should use an Id
between 0xf000 - 0xffff until the messages are finalised.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@584 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* implementation of p3config, cache functionality to p3Qblog
* added peerid (pid) attribute to rsQblog item and its serialisation
* TODO: logical updating for p3Qblog
* TODO: implement tick() so can add to server
* TODO: test p3Qblog after addition of tick with some peers
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@571 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) std::map<> doesn't support .at() on OSX or Windows. (use [] or find())
(2) u_int32_t is invalid on windows. (use uint32_t )
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@553 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added Anonymous links, stored in configuration file.
* Friends recommendations are also shared anonymously with peers.
* Own recommendations are shared with friends.
* TODO include ranking (+2 <-> -2) in score.
* some bugfixes too.
Added RandomId to p3service file.
Improved forum interface.
Added dummy forum system (not transmitted) for testing.
Switched on new features as well.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@505 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Fixed up Variable Ticking -> max = 1.0 sec now.
* Removed debug output which was massively increasing CPU load.
* Removed some old code from p3face-server.cc
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@461 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Switched p3Ranking to share Friends Links as well as own.
* Modified rankmsgs to contain source id.
* Fixed up rsNotify, added pqiNotify and global function call to get it.
* Added notify for Bad Incoming Directory
* Added Emergency Incoming directory so RS can keep running.
* Added notify for Bad Packet (connecting to V0.3.X)
* Added notify for Incomplete Packet Read (not been triggered yet!)
* added close() to BinInterface, close on pqissl calls reset()
* removed exit(1) calls from pqistreamer, replaced with bio->close().
* Increased Maximum Packet Size for HTML messages.
* Fixed Online/Offline Message Forwarding. (TEST).
* Increased DHT bootstrap buckets to 4.
* Cleaned up much of serialiser debug (was slowing down Mac)
* Added directory path to File Listings.
* added ConvertSharedFilePath() so correct local dir can be found.
* Added ForceDirectoryCheck() and InDirectoryCheck() for file hashing.
* removed old TMP cache loading.
* switched off Cache debug.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@448 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) xpgp_id to extract the name/id from a certificate.
(2) dht_bootstrap to check the status of the bootstrap peers.
Various bits of code needed to be rearranged to make these utilities possible.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@394 b45a01b8-16f6-495d-af2f-9b41ad6348cc
(1) A PhotoService / Dialog to share slideshows.
(2) A Network View service, derived from p3disc for a graphical view of peers.
Both of these need a little help to get them fully functional.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@375 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Most of these changes relate to:
(1) rand() is different
(2) sleep() don't exist on Windows.
(3) networking headers are different - these need to be cleaned up in general.
(4) disabled tests that won't compile on Windows.
Will probably have to rollback some of these changes for Unix later.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@372 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added stun bootstrap functionality.
* Added in two temporary StunServers.
* Reconnect attempts are TCP only.
* enabled AUTOCONNECT and TCP Connections.
* reduced UDP keepAlive timer to 15 secs.
* made UPnP the default startup behaviour.
* Removed StunId raw printouts -> now use BinToHex()
* Unified TTLS and PERIODS in p3dhtmgr.h
* DHT bugfix (data not passed to ConnMgr).
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@370 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Completed CacheConfig serialisation.
* Switched to Push Cache Mode (faster and more efficient).
* Added CancelCacheTransfer() if we have duplicate HASH / CACHEID.
* Store remote and local caches.
* cleanup all cache directories.
* Broke Cache tests :( - because of dependency of mAuthMgr/mConnMgr.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@343 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added serialiser types.
* finished streaming on p3ranking.
* removed Bandwidth limitations from BinFile / BinMem.
* added bytecount() to BinInterface.
* moved the CacheTransfer creation to Startup.
* added ranking to CacheStrapper & server tick() system.
* Tweaked LinksDialog for final touches.
* enabled downloads from Messages.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@335 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added sockaddr_clear() function to zero network addresses before use.
* used this function in p3connmgr.
* added htonll() and ntohll() functions to rsnet.h with compile-time ENDIAN checking
* use htonll() and ntohll() in serialiser.
* added net_test.cc to check network/endian/inet_addr issues.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@328 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Major modifications to p3disc to use the new AuthMgr and ConnMgr.
* Modified RsDiscItems to match new p3disc.
* Modified ConnMgr to accept information from p3disc.
* Addition of new Load/Save Certificate From/To Binary to AuthMgr.
* Corrected default build to Linux.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@325 b45a01b8-16f6-495d-af2f-9b41ad6348cc
the rewrite of the retroshare core networking stack.
This check-in commits the changes to the serialiser code.
Added serialisation of Key-Value pairs Config message.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@312 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* New external interface for launcher (rsiface/rsgame.h)
* changed pqiservice type Ids from int -> uint32_t.
* added NO_DELETE option to pqistreamer.
* added HASHDATA flag for BinInterfaces
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@301 b45a01b8-16f6-495d-af2f-9b41ad6348cc
This is still a first draft - the message types will surely change.
-corrected ids and added service classes.
-Added disc/msg/chat/cache/file messages
-Extended serialiser to handle service extensions.
-corrected IpAddrPort code.
-More debugging code.
-Added some tests.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@270 b45a01b8-16f6-495d-af2f-9b41ad6348cc
###
### The commented-out examples below are intended to demonstrate
### how to use this file.
### Section for authentication and authorization customizations.
[auth]
### Set store-passwords to 'no' to avoid storing passwords in the
### auth/ area of your config directory. It defaults to 'yes'.
### Note that this option only prevents saving of *new* passwords;
### it doesn't invalidate existing passwords. (To do that, remove
### the cache files by hand as described in the Subversion book.)
# store-passwords = no
### Set store-auth-creds to 'no' to avoid storing any subversion
### credentials in the auth/ area of your config directory.
### It defaults to 'yes'. Note that this option only prevents
### saving of *new* credentials; it doesn't invalidate existing
### caches. (To do that, remove the cache files by hand.)
# store-auth-creds = no
### Section for configuring external helper applications.
[helpers]
### Set editor to the command used to invoke your text editor.
### This will override the environment variables that Subversion
### examines by default to find this information ($EDITOR,
### et al).
# editor-cmd = editor (vi, emacs, notepad, etc.)
### Set diff-cmd to the absolute path of your 'diff' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff implementation.
# diff-cmd = diff_program (diff, gdiff, etc.)
### Set diff3-cmd to the absolute path of your 'diff3' program.
### This will override the compile-time default, which is to use
### Subversion's internal diff3 implementation.
# diff3-cmd = diff3_program (diff3, gdiff3, etc.)
### Set diff3-has-program-arg to 'true' or 'yes' if your 'diff3'
### program accepts the '--diff-program' option.
# diff3-has-program-arg = [true | false]
### Section for configuring tunnel agents.
[tunnels]
### Configure svn protocol tunnel schemes here. By default, only
### the 'ssh' scheme is defined. You can define other schemes to
### be used with 'svn+scheme://hostname/path' URLs. A scheme
### definition is simply a command, optionally prefixed by an
### environment variable name which can override the command if it
### is defined. The command (or environment variable) may contain
### arguments, using standard shell quoting for arguments with
### spaces. The command will be invoked as:
### <command> <hostname> svnserve -t
### (If the URL includes a username, then the hostname will be
### passed to the tunnel agent as <user>@<hostname>.) If the
### built-in ssh scheme were not predefined, it could be defined
### as:
# ssh = $SVN_SSH ssh
### If you wanted to define a new 'rsh' scheme, to be used with
### 'svn+rsh:' URLs, you could do so as follows:
# rsh = rsh
### Or, if you wanted to specify a full path and arguments:
# rsh = /path/to/rsh -l myusername
### On Windows, if you are specifying a full path to a command,
### use a forward slash (/) or a paired backslash (\\) as the
### path separator. A single backslash will be treated as an
### escape for the following character.
### Section for configuring miscelleneous Subversion options.
[miscellany]
### Set global-ignores to a set of whitespace-delimited globs
### which Subversion will ignore in its 'status' output, and
### while importing or adding files and directories.
# global-ignores = *.o *.lo *.la #*# .*.rej *.rej .*~ *~ .#* .DS_Store
### Set log-encoding to the default encoding for log messages
# log-encoding = latin1
### Set use-commit-times to make checkout/update/switch/revert
### put last-committed timestamps on every file touched.
# use-commit-times = yes
### Set no-unlock to prevent 'svn commit' from automatically
### releasing locks on files.
# no-unlock = yes
### Set enable-auto-props to 'yes' to enable automatic properties
### for 'svn add' and 'svn import', it defaults to 'no'.
### Automatic properties are defined in the section 'auto-props'.
# enable-auto-props = yes
### Section for configuring automatic properties.
[auto-props]
### The format of the entries is:
### file-name-pattern = propname[=value][;propname[=value]...]
### The file-name-pattern can contain wildcards (such as '*' and
### '?'). All entries which match will be applied to the file.
### Note that auto-props functionality must be enabled, which
### is typically done by setting the 'enable-auto-props' option.
# *.c = svn:eol-style=native
# *.cpp = svn:eol-style=native
# *.h = svn:eol-style=native
# *.dsp = svn:eol-style=CRLF
# *.dsw = svn:eol-style=CRLF
# *.sh = svn:eol-style=native;svn:executable
# *.txt = svn:eol-style=native
# *.png = svn:mime-type=image/png
# *.jpg = svn:mime-type=image/jpeg
# Makefile = svn:eol-style=native
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@250 b45a01b8-16f6-495d-af2f-9b41ad6348cc
