In this case, don't cancel the old one - just keep going!
This should fix the issues associated with cache restarts and frequent peer disconnects.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4808 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added an own ui for the ChatLobbyDialog.
Saved settings of the ChatLobbyDialog.
Changed parameters of RsStatus interface from "std::string" to "const std::string&"
Fixed german language.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4806 b45a01b8-16f6-495d-af2f-9b41ad6348cc
that are invited.
- added auto-clean of nicknames
- added auto-clean of public lobby records.
Warning: this commit breaks one small bit of compatibility:
* direct invitations from new versions will pass accross versions (private lobbies will need the new version)
* but people can still join public lobbies accross versions.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4801 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* new classe p3zcNatAssist
* moved some common ZeroConf functions / definitions around.
* moved virtual tick() to parent class: pqiNetAssist
* added zcNetAssist section to makefiles. (active for OSX build)
* setup switch between p3zcNatAssist & upnphandler in rsinit.cc
NOTE: Still to test network restart, etc, and correct exchange of external Ip Address.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4800 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Changes to support Relays.
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
* Added NumQueryNodes() function to bdDhtFunctions.
* Switched bdquery.cc to use bdNumQueryNodes().
* Extended bdStdDht class to bdModDht to allow NodesPerBucket to be modified.
* Fixed up Connection Fail Callback for Relay Servers.
* Added Extra debugging for Proxy Connections.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4796 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* added p3BitDht::addKnownNode() so that DhtIds can be used instead of SslIds.
* switched from bdStdDht() functions to use bdModDht().
* made DhtFunctions a class variable.
* added function to modify NodePerBucket() parameter.
* Bugfix for LinkType. peerConnectAddress.flags was not initialised.
* Extra debugging of LinkType data (use LINKMGR_DEBUG_LINKTYPE).
* cleaned up udprelay output.
* Added Compile Rules to libretroshare.pro for building LocalNet Testing Version. (testnetwork)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4795 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added new notifier to p3ChatService
GUI:
- list all public and private chat lobbies
- added subscribe/unsubscribe
- added new basic widget ChatTabWidget and use it in PopupChatWindow and ChatLobbyDialog
- added a tabbed dialog for every subscribed chat lobby
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4782 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Merging Dht Relay improvements into the trunk. These changes should finally make relays functional.
There are still some service changes required to reduce the traffic over relays.
Summary of Changes
---------------------
* Changed the way proxy/relay peers are selected in bdConnection. (needs more work).
* Added LinkType to peer info in p3LinkMgr & rspeers.h interface.
* Added getConnectionType() to p3PeerMgr. This defaults to FRIEND for the moment.
* Provide information about Bandwidth, Transport and Peer Type via LinkType().
* Added RateCap() to limit traffic over Relay connections.
* Set Internal Rate to 75% of Relay Limit to account for transport overhead.
* Added various #include "util/rswin.h" to fix compile errors with standard ssl package.
* Removed Local variables (mConnectProxyAddr, etc) which were hiding Class Variables.
* Cleaned up bits in pqissl.cc and p3linkmgr.cc
* Increased UDP Relay Packet size (max transport of 1400 bytes per UDP packet)
* Modified checkRelay() to use Low Pass Filter to calculate Relay Bandwidth.
* Improved udprelay debugging.
* increased (x2) Relay Lifetimes - this is so that enough useful data can be transported (1meg).
* Added LOCALNET_TESTING code to rsinit.cc. This allows Port Restrictions to simulate firewalls.
* more debugging and minor bugfixes.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4780 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Disabled lots of debugging.
* Disabled LOCAL test mode in udpstunner, rsinit
* Enabled BadPeer checking in bitdht.
* Restored normal timeout periods for connection attempts.
* Restored normal connection levels for dht status.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4779 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Improved Relay Status Output & print when checkRelay() is called.
* initialise timer variable (mMinuteTS) - was causing checkRelay to never be called.
* switched to 10 second calling of checkRelay().
* Increased RELAY lifetimes (x2). now GENERAL = 1 hr, so they can at least transfer 1 meg (minimum block size)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4777 b45a01b8-16f6-495d-af2f-9b41ad6348cc
of the overhead associated with TCP and Relay connections:
* The Internal rate is calculated based on transmitted data (a reliable stream).
* The Relay rate is calculated at UDP packet level and is x1.1 - x1.2 higher than internal rate.
The Relay will drop the connection if peers exceed specified level - so best to leave some head room.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4773 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added LinkType to p3LinkMgr => exposed via rspeers.h
* Added ConnectionType to p3PeerMgr. This is dummy default to FRIEND at the moment.
* Flag bandwidth limited Relay links as such.
* Switched DNS Address connect to in front of historical addresses.
* Reverted Flags in p3LinkMgr to what they were.
* Added LinkType Flags to rspeers.h
* removed getConnectFlags() as it was a bad way to do things.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4769 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Adding more detailed flags to each connection.
* Cleaned up unneeded stuff from p3LinkMgr.
* Added rswin.h includes before openssl - allows compilation using std Win OpenSSL.
* Added getConnectFlags() to Net Base.
* removed net_attempt and associated obsolete variables from pqissl
* Made NetBinInterface protected in pqiperson (is this okay?)
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4767 b45a01b8-16f6-495d-af2f-9b41ad6348cc
NB: Reverse Most of these changes - before adding to Trunk!!!!
* Added missing BitDht callback functions for test/example code.
* Switch tests/example to OSX compile.
* DISABLE_BAD_PEER_FILTER (as it doesn't like local net)
* Reduced Minimum Peer Counts for DHT to be considered active.
* Added LOCALNET_TESTING to rsinit.cc
- new Commandline Option -R <lport-uport> to restrict UDP ports.
- Enables LocalNet in UdpStunner.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4756 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- added generic methods and items for bouncing generic objects through lobbies
- added handling of peer typing status
- proper handling of peer join/leave lobby
- added sub item ids to lobby messages to allow proper message splitting
- made 2 different message splitting methods for normal chat vs. lobbies. In v0.6, we'll have to handle all messages the same way.
- added parent id to RsChatLobbyMsgItem, to allow threaded chat.
- added possibility to make a lobby public/private (not yet fully working)
- added items for requesting/exchanging list of public lobbies at friends' (not yet fully working)
- major cleaning of p3chatservice.cc
Next move:
- gui for listing friend public lobbies, joining them, etc.
- load/save of persistent lobbies.
- autoremove of inactive lobbies
Warning: lobby message items of this version are incompatible with previous versions. It won't crash, but
messages will not pass through.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4755 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added Timeouts for Resolve and QueryIP, as these can continue indefinitely.
- Added more debugging.
- rotated port number using ntohs().
- Filtered Self.
- Allowed Other SSL IDs of Self to connect.
- Fixed QueryIP to use hosttarget instead of servicename.
- fixed Id order in mPeerMgr->addFriend().
- fixed p3ZeroConf initialisation call.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4752 b45a01b8-16f6-495d-af2f-9b41ad6348cc
