NB: Reverse Most of these changes - before adding to Trunk!!!!
* Added missing BitDht callback functions for test/example code.
* Switch tests/example to OSX compile.
* DISABLE_BAD_PEER_FILTER (as it doesn't like local net)
* Reduced Minimum Peer Counts for DHT to be considered active.
* Added LOCALNET_TESTING to rsinit.cc
- new Commandline Option -R <lport-uport> to restrict UDP ports.
- Enables LocalNet in UdpStunner.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4756 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added Timeouts for Resolve and QueryIP, as these can continue indefinitely.
- Added more debugging.
- rotated port number using ntohs().
- Filtered Self.
- Allowed Other SSL IDs of Self to connect.
- Fixed QueryIP to use hosttarget instead of servicename.
- fixed Id order in mPeerMgr->addFriend().
- fixed p3ZeroConf initialisation call.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4752 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Updated DhtMode Flags.
- Allowed DhtMode Flags to be set independently.
- Set RelayMode to ConnectionManager.
- Added dropRelayServers() / pingRelayServers()
- Added Support fns for above two functions.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4729 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Modified UdpRelay handles the counting...
now each Relay Class has a bandwidth limit,
and you can drop down to a lower class - if your one is full.
This ensures that the desired bandwidth is kept, and allows more friends to use the relays.
* Added Interface in p3bitdht.
TODO: Test this stuff!
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4728 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- registers oneself, browses and resolves services.
- Lots still TODO:
- parse TxtRecords.
- Track peers.
- feedback to libretroshare
- etc, etc.
Enabled ZeroConf in libretroshare.pro & rsinit.cc. Compiles and runs on OSX.
Added RelayHandler to Dht, to enable external control of Relays.
Marked pqiAssist Interface for changes... will be revamped with ZeroConf.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4727 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added UdpStunner::dropStunPeer() code to remove bad peer from stun list.
* added calls to UdpStunner::dropStunPeer for BanLists going to/from DHT.
* added DEBUG_BANLIST_CONDENSE to remove unnecessary debug.
* Improved UdpStunner::status() print out of stunlist.
* Added extra check to throw away stun reports where remote_addr == reported ext_addr.
- This was causing peers to get the wrong IP addresses.
* Modified UdpStunner ExtAddr checks to make sure the IP addresses match.
* Changed BANLIST service Id to from Test ID to real ID.
NOTE: These are stop-gap methods to avoid the wrong Stun reports.
A more robust scheme must be implemented. I'd expect that it would
involve a strict initial check to establish your IP address...
(e.g. require 4 peers to confirm it, allowing for some fake entries)
After this we can have a weaker check ensuring IP address matches.
If we detect a likely REAL change of IP address - drop back to requiring
a strick check again.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4717 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Enabling Local BadPeer Filter.
- This will remove any peer you detect is spoofing yourself or your friends.
- This list is also shared with you friends. (in Test Mode).
* added Cleanup of BadPeer Filter.
- Instead of permanent ban, peers are be banned for 6 hours.
- bdManager periodically calls this - which prints out ban list too.
* added #define to disable the Filter - for testing purposes.
NOTES: This Ip Filter should probably be moved from DHT level to UdpLayer level.
This will enable it to filter STUN / UDP Connection Packets too.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4716 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- At this level it takes significantly longer for the searches to complete, but
there are no DOS warnings on the router. This should hopefully make users happy.
* Added DhtMode() Interface call to dynamically change this rate.
- Can be switched between (HIGH: 50/sec, MED: 20/sec, LOW: 5/sec & TRICKLE: 3/sec)
* Disable additional Queries if PotentialPeer Queue gets too big.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4703 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Store all possible routes (will be useful later!)
* Periodically cycle through and choose the most stable one.
* added ValidSince field... for tracking age.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4697 b45a01b8-16f6-495d-af2f-9b41ad6348cc
* Added p3BanList as a service.
* Added interfaces to communicate addresses.
* Added debug to p3BanList.
* Fixed several bugs in the AddEntry/Condense
* Fixed Mutex deadlocks.
Improvements to Dsdv code too.
* Added p3Dsdv as a service.
* Added Function to create a TEST service for routing.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4687 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- Added missing Mutex protection in p3BitDht.
- Added p3BitDht::addKnownPeer() to communicate with libbitdht.
- Disabled placeholder versions (addFriend/AddFriendOfFriend)
- Added netAssistKnownPeer() libretroshare interface.
- Added calls to netAssistKnownPeer() from p3disc and p3NetMgr.
- Check for NULL ptr in p3NetMgr before calling p3PeerMgr.
- Added FIX to maintain MANUAL FORWARD port (untested!)
- Removed some compiler warnings.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4681 b45a01b8-16f6-495d-af2f-9b41ad6348cc
Added Knowledge of Friends, Friends of Friends and Relays.
- Added bdfriendlist class to store information.
- New interface function updateKnownPeer().
- includes IP addresses, if known. (for filtering)
Bad Peer Filtering.
- Check IDs against known peer IP addresses.
- Added checks in checkPotentialPeer().
- Added checks in addPeer().
- Running in TestMode at the moment (Bad Peers are only flagged).
Other Fixes:
- Removed some warning about int/uint comparisons.
- added bdSpace::flagpeer() fn to support above.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/branches/v0.5-dhtmods@4680 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- removed dependency of mRateIncrease into measured rtt -> would cause very slow transfers through long tunnels
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4671 b45a01b8-16f6-495d-af2f-9b41ad6348cc
and files that RS can DL seamlessly in the DL directory. Collection files are created from shared files
and can be handled by righ-clicking on them in Transfers and Shared files. Handling is based on the extension,
that must be "rscollection".
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4664 b45a01b8-16f6-495d-af2f-9b41ad6348cc
- servers now compute the map in a separate thread
- CRC32Maps are kept in cache for 30 mins
- CRC32Maps requests cannot be used to overflood a server anymore since their number is limited.
- Transfer modules now send keep alive packets to maintain tunnels when asking for a CRC32Map
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4661 b45a01b8-16f6-495d-af2f-9b41ad6348cc
re-organises (e.g. defragments) data such that
- when the DL is finished, the file is in the correct order (no need to re-order it)
- during the DL, only the n*_chunk_size first bytes of the partial file are written, where n is the total number of downloaded chunks.
- the total amount of copy operations does not exceed the total size of the file. In practice, it's much lower.
That suppresses the lag when downloading large files due to writing isolated chunks in the middle of the file.
Next:
- integration into ftFileCreator
- load/save in ft_transfers
- retrocompatibility with existing transfers.
git-svn-id: http://svn.code.sf.net/p/retroshare/code/trunk@4658 b45a01b8-16f6-495d-af2f-9b41ad6348cc
