RNode_Firmware_CE/Config.h

363 lines
9.5 KiB
C
Raw Normal View History

2023-01-13 18:11:02 -05:00
// Copyright (C) 2023, Mark Qvist
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
// You should have received a copy of the GNU General Public License
// along with this program. If not, see <https://www.gnu.org/licenses/>.
#include "ROM.h"
2018-04-05 12:10:42 -04:00
#ifndef CONFIG_H
#define CONFIG_H
#define MAJ_VERS 0x01
2023-01-11 13:04:23 -05:00
#define MIN_VERS 0x37
2022-01-09 17:40:30 -05:00
#define PLATFORM_AVR 0x90
#define PLATFORM_ESP32 0x80
2018-04-05 12:10:42 -04:00
#define MCU_1284P 0x91
2021-12-13 19:50:37 -05:00
#define MCU_2560 0x92
2022-01-09 17:40:30 -05:00
#define MCU_ESP32 0x81
2018-04-05 12:10:42 -04:00
#define BOARD_RNODE 0x31
#define BOARD_HMBRW 0x32
#define BOARD_TBEAM 0x33
#define BOARD_HUZZAH32 0x34
#define BOARD_GENERIC_ESP32 0x35
#define BOARD_LORA32_V2_0 0x36
#define BOARD_LORA32_V2_1 0x37
2022-06-16 13:12:28 -04:00
#define BOARD_HELTEC32_V2 0x38
2022-06-11 10:42:49 -04:00
#define BOARD_RNODE_NG_20 0x40
#define BOARD_RNODE_NG_21 0x41
2022-01-14 14:49:50 -05:00
2018-06-20 11:45:22 -04:00
#define MODE_HOST 0x11
#define MODE_TNC 0x12
2022-10-30 13:58:12 -04:00
#define CABLE_STATE_DISCONNECTED 0x00
#define CABLE_STATE_CONNECTED 0x01
uint8_t cable_state = CABLE_STATE_DISCONNECTED;
#define BT_STATE_NA 0xff
#define BT_STATE_OFF 0x00
#define BT_STATE_ON 0x01
#define BT_STATE_PAIRING 0x02
#define BT_STATE_CONNECTED 0x03
uint8_t bt_state = BT_STATE_NA;
uint32_t bt_ssp_pin = 0;
bool bt_ready = false;
bool bt_enabled = false;
bool bt_allow_pairing = false;
2023-01-07 10:35:07 -05:00
#define M_FRQ_S 27388122
#define M_FRQ_R 27388061
bool console_active = false;
bool sx1276_installed = false;
2020-05-28 16:18:19 -04:00
#if defined(__AVR_ATmega1284P__)
2022-01-14 14:49:50 -05:00
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_1284P
2021-12-13 19:50:37 -05:00
#elif defined(__AVR_ATmega2560__)
2022-01-14 14:49:50 -05:00
#define PLATFORM PLATFORM_AVR
#define MCU_VARIANT MCU_2560
2022-01-09 17:40:30 -05:00
#elif defined(ESP32)
2022-01-14 14:49:50 -05:00
#define PLATFORM PLATFORM_ESP32
#define MCU_VARIANT MCU_ESP32
2018-04-05 12:10:42 -04:00
#else
2022-01-14 14:49:50 -05:00
#error "The firmware cannot be compiled for the selected MCU variant"
2018-04-05 12:10:42 -04:00
#endif
#define MTU 508
2018-04-05 12:10:42 -04:00
#define SINGLE_MTU 255
#define HEADER_L 1
2020-05-28 16:18:19 -04:00
#define MIN_L 1
#define CMD_L 64
2018-04-05 12:10:42 -04:00
// MCU dependent configuration parameters
#define HAS_DISPLAY false
#define HAS_BLUETOOTH false
#define HAS_PMU false
2022-12-04 14:00:21 -05:00
#define HAS_NP false
2018-04-05 12:10:42 -04:00
#if MCU_VARIANT == MCU_1284P
const int pin_cs = 4;
const int pin_reset = 3;
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
2018-04-26 04:34:39 -04:00
2022-01-14 14:49:50 -05:00
#define BOARD_MODEL BOARD_RNODE
2020-05-29 08:58:10 -04:00
#define CONFIG_UART_BUFFER_SIZE 6144
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
2022-01-09 17:40:30 -05:00
#elif MCU_VARIANT == MCU_2560
2022-01-21 16:08:55 -05:00
const int pin_cs = 5;
const int pin_reset = 4;
2021-12-13 19:50:37 -05:00
const int pin_dio = 2;
const int pin_led_rx = 12;
const int pin_led_tx = 13;
2022-01-14 14:49:50 -05:00
#define BOARD_MODEL BOARD_HMBRW
#define CONFIG_UART_BUFFER_SIZE 768
#define CONFIG_QUEUE_SIZE 5120
#define CONFIG_QUEUE_MAX_LENGTH 24
2021-12-13 19:50:37 -05:00
#define EEPROM_SIZE 4096
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
2022-01-09 17:40:30 -05:00
#elif MCU_VARIANT == MCU_ESP32
2022-01-25 13:14:16 -05:00
// Board models for ESP32 based builds are
// defined by the build target in the makefile.
// If you are not using make to compile this
// firmware, you can manually define model here.
//
// #define BOARD_MODEL BOARD_GENERIC_ESP32
#if BOARD_MODEL == BOARD_GENERIC_ESP32
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
2022-10-30 13:58:12 -04:00
#define HAS_BLUETOOTH true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
#elif BOARD_MODEL == BOARD_TBEAM
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
const int pin_led_rx = 2;
const int pin_led_tx = 4;
2022-10-30 13:58:12 -04:00
#define HAS_DISPLAY true
#define HAS_PMU true
2022-10-30 13:58:12 -04:00
#define HAS_BLUETOOTH true
#define HAS_CONSOLE true
#define HAS_SD false
#elif BOARD_MODEL == BOARD_HUZZAH32
const int pin_cs = 4;
const int pin_reset = 36;
const int pin_dio = 39;
const int pin_led_rx = 14;
const int pin_led_tx = 32;
2022-10-30 13:58:12 -04:00
#define HAS_BLUETOOTH true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
2022-01-21 16:45:26 -05:00
#elif BOARD_MODEL == BOARD_LORA32_V2_0
2022-01-24 13:30:00 -05:00
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
2022-01-24 14:33:58 -05:00
const int pin_led_rx = 2;
const int pin_led_tx = 0;
2022-01-24 13:30:00 -05:00
#else
2022-01-24 14:33:58 -05:00
const int pin_led_rx = 22;
const int pin_led_tx = 22;
2022-01-24 13:30:00 -05:00
#endif
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
2022-01-21 16:45:26 -05:00
#elif BOARD_MODEL == BOARD_LORA32_V2_1
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
2022-01-22 15:43:52 -05:00
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 15;
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_PMU true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
2022-06-16 13:12:28 -04:00
#elif BOARD_MODEL == BOARD_HELTEC32_V2
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 36;
const int pin_led_tx = 37;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
#define HAS_DISPLAY true
2022-10-30 13:58:12 -04:00
#define HAS_BLUETOOTH true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
2022-06-11 10:42:49 -04:00
#elif BOARD_MODEL == BOARD_RNODE_NG_20
2022-12-04 14:00:21 -05:00
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
#define HAS_NP true
2023-01-11 06:40:20 -05:00
#define HAS_CONSOLE true
2022-06-11 10:42:49 -04:00
const int pin_cs = 18;
const int pin_reset = 12;
const int pin_dio = 26;
2022-12-04 14:00:21 -05:00
const int pin_np = 4;
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
const int pin_led_rx = 2;
const int pin_led_tx = 0;
#else
const int pin_led_rx = 22;
const int pin_led_tx = 22;
#endif
2022-06-11 10:42:49 -04:00
#endif
2022-12-04 14:00:21 -05:00
#elif BOARD_MODEL == BOARD_RNODE_NG_21
#define HAS_DISPLAY true
#define HAS_BLUETOOTH true
2023-01-06 16:29:23 -05:00
#define HAS_CONSOLE true
2022-12-04 14:00:21 -05:00
#define HAS_PMU true
#define HAS_NP true
2023-01-10 12:12:40 -05:00
#define HAS_SD false
2022-06-11 10:42:49 -04:00
const int pin_cs = 18;
const int pin_reset = 23;
const int pin_dio = 26;
2023-01-09 16:27:52 -05:00
const int pin_np = 12;
const int pin_dac = 25;
const int pin_adc = 34;
const int SD_MISO = 2;
const int SD_MOSI = 15;
const int SD_CLK = 14;
const int SD_CS = 13;
2022-12-04 14:00:21 -05:00
#if HAS_NP == false
#if defined(EXTERNAL_LEDS)
2023-01-09 16:27:52 -05:00
const int pin_led_rx = 12;
2022-12-04 14:00:21 -05:00
const int pin_led_tx = 4;
#else
const int pin_led_rx = 25;
const int pin_led_tx = 25;
#endif
2022-06-11 10:42:49 -04:00
#endif
#else
#error An unsupported board was selected. Cannot compile RNode firmware.
#endif
2022-01-14 14:49:50 -05:00
bool mw_radio_online = false;
2022-01-14 15:12:33 -05:00
#define CONFIG_UART_BUFFER_SIZE 6144
2022-01-09 17:40:30 -05:00
#define CONFIG_QUEUE_SIZE 6144
#define CONFIG_QUEUE_MAX_LENGTH 200
2022-01-09 17:40:30 -05:00
#define EEPROM_SIZE 1024
#define EEPROM_OFFSET EEPROM_SIZE-EEPROM_RESERVED
2022-01-10 20:54:32 -05:00
#define GPS_BAUD_RATE 9600
#define PIN_GPS_TX 12
#define PIN_GPS_RX 34
2021-12-13 19:50:37 -05:00
#endif
2022-01-14 14:49:50 -05:00
#if BOARD_MODEL == BOARD_TBEAM
2022-01-22 16:34:03 -05:00
#define I2C_SDA 21
#define I2C_SCL 22
#define PMU_IRQ 35
2022-01-14 14:49:50 -05:00
#endif
#define eeprom_addr(a) (a+EEPROM_OFFSET)
2018-04-05 12:10:42 -04:00
// MCU independent configuration parameters
2022-01-10 16:14:30 -05:00
const long serial_baudrate = 115200;
2018-04-26 10:47:03 -04:00
const int lora_rx_turnaround_ms = 50;
2018-04-05 12:10:42 -04:00
// SX1276 RSSI offset to get dBm value from
// packet RSSI register
2022-01-09 17:40:30 -05:00
const int rssi_offset = 157;
2018-04-05 12:10:42 -04:00
// Default LoRa settings
2018-06-20 10:32:30 -04:00
int lora_sf = 0;
int lora_cr = 5;
int lora_txp = 0xFF;
2018-04-05 12:10:42 -04:00
uint32_t lora_bw = 0;
uint32_t lora_freq = 0;
// Operational variables
2021-03-12 12:48:50 -05:00
bool radio_locked = true;
bool radio_online = false;
2022-10-29 10:42:46 -04:00
bool community_fw = true;
2021-03-12 12:48:50 -05:00
bool hw_ready = false;
2022-10-29 10:42:46 -04:00
bool radio_error = false;
bool disp_ready = false;
bool pmu_ready = false;
2021-03-12 12:48:50 -05:00
bool promisc = false;
bool implicit = false;
uint8_t implicit_l = 0;
2018-06-27 05:42:48 -04:00
2018-06-20 11:45:22 -04:00
uint8_t op_mode = MODE_HOST;
uint8_t model = 0x00;
uint8_t hwrev = 0x00;
2021-12-13 19:50:37 -05:00
int current_rssi = -292;
2018-06-27 08:08:16 -04:00
int last_rssi = -292;
uint8_t last_rssi_raw = 0x00;
uint8_t last_snr_raw = 0x80;
2018-04-05 12:10:42 -04:00
uint8_t seq = 0xFF;
2022-01-14 14:49:50 -05:00
uint16_t read_len = 0;
2021-12-13 19:50:37 -05:00
2020-05-28 16:18:19 -04:00
// Incoming packet buffer
2018-04-05 12:10:42 -04:00
uint8_t pbuf[MTU];
2020-05-28 16:18:19 -04:00
// KISS command buffer
uint8_t cmdbuf[CMD_L];
2018-04-05 12:10:42 -04:00
2020-05-28 16:18:19 -04:00
// LoRa transmit buffer
uint8_t tbuf[MTU];
2018-06-27 04:22:44 -04:00
2018-04-05 12:10:42 -04:00
uint32_t stat_rx = 0;
uint32_t stat_tx = 0;
2018-04-26 09:52:43 -04:00
bool stat_signal_detected = false;
bool stat_signal_synced = false;
bool stat_rx_ongoing = false;
bool dcd = false;
bool dcd_led = false;
bool dcd_waiting = false;
uint16_t dcd_count = 0;
uint16_t dcd_threshold = 15;
uint32_t status_interval_ms = 3;
uint32_t last_status_update = 0;
// Status flags
const uint8_t SIG_DETECT = 0x01;
const uint8_t SIG_SYNCED = 0x02;
const uint8_t RX_ONGOING = 0x04;
// Power management
#define BATTERY_STATE_DISCHARGING 0x01
#define BATTERY_STATE_CHARGING 0x02
#define BATTERY_STATE_CHARGED 0x03
2022-10-30 17:27:30 -04:00
bool battery_installed = false;
bool battery_indeterminate = false;
2022-10-30 17:27:30 -04:00
bool external_power = false;
bool battery_ready = false;
float battery_voltage = 0.0;
float battery_percent = 0.0;
uint8_t battery_state = 0x00;
uint8_t display_intensity = 0xFF;
bool device_init_done = false;
bool eeprom_ok = false;
bool firmware_update_mode = false;
2021-12-26 05:27:32 -05:00
// Boot flags
#define START_FROM_BOOTLOADER 0x01
#define START_FROM_POWERON 0x02
#define START_FROM_BROWNOUT 0x03
#define START_FROM_JTAG 0x04
2022-01-24 13:30:00 -05:00
#endif