Git-Mirrors/RNode_Firmware
1
0
Fork 0
mirror of https://github.com/markqvist/RNode_Firmware.git synced 2024-12-18 12:24:37 -05:00
Code Issues Actions Packages Projects Releases Wiki Activity
0ddf410445
RNode_Firmware/Console/source/builds/handheld.md
Mark Qvist 362537a5db Updated console site
2023-01-13 17:12:58 +01:00

1.7 KiB
Raw Blame History

Handheld RNode Recipe

This build recipe will help you create an RNode that is suitable for mobile and handheld operation, and offers both wireless and wired connectivity to host devices. It is also useful for permanent installation indoors, or even outdoors, as long as it is protected from water ingress and direct sunlight.

Table of Contents

  1. Preparation
  2. Supported Board
  3. Materials
  4. Print Parts
  5. Install Tools
  6. Firmware Setup
  7. Assembly

Step 1: Preparation

To complete this build recipe, you will need access to the following items:

  • A computer with a functional operating system, such as Linux, BSD or macOS
  • One of the supported development boards for this recipe
  • A suitable USB cable for connecting the development board to your computer
  • A 3D printer and the necessary amount of material for printing the device parts
  • 6 pieces of M2x6mm screws to assemble the case
  • A suitable antenna
  • An optional NeoPixel RGB LED
  • An optional battery

Step 2: Supported Development Boards

Lorem

Step 3: Materials

Lorem

Step 4: 3D Print Parts

Lorem

Step 5: Install Tools

Lorem

Step 6: Firmware Setup

Lorem

Step 7: Assembly

Lorem