mirror of
https://github.com/Qubes-Community/Contents.git
synced 2024-12-22 21:59:26 -05:00
a47f66ff63
cf. https://forum.qubes-os.org/t/anonymizing-mac-address-documentation-clarification/14731
65 lines
4.6 KiB
Markdown
65 lines
4.6 KiB
Markdown
|
|
Anonymizing your MAC address
|
|
============================
|
|
|
|
Although the MAC address is not the only metadata broadcast by network hardware, changing your hardware's default [MAC Address](https://en.wikipedia.org/wiki/MAC_address) could be [an important step in protecting privacy](https://tails.boum.org/contribute/design/MAC_address/#index1h1).
|
|
|
|
Qubes OS 4.1 and later already anonymize all Wi-Fi MAC addresses [by default](https://github.com/QubesOS/qubes-core-agent-linux/blob/master/network/nm-31-randomize-mac.conf) - they change during every Wifi session.
|
|
So there is **no need** to apply any of the instructions below if you're only interested in Wi-Fi connections. Users requiring Ethernet MAC address anonymization may want to read on.
|
|
|
|
## Randomize a single connection
|
|
|
|
Right click on the Network Manager icon of your NetVM in the tray and click 'Edit Connections...'.
|
|
|
|
Select the connection to randomize and click Edit.
|
|
|
|
Select the "Cloned MAC Address" drop-down list and pick either 'Random" or "Stable'.
|
|
'Stable' will generate a random address that persists until reboot, while 'Random' will generate an address each time a link goes up.
|
|
|
|
|
|
Save the change and reconnect the connection (click on Network Manager tray icon and click "Disconnect" under the connection, it should automatically reconnect).
|
|
|
|
## Randomize all Ethernet and Wi-Fi connections
|
|
|
|
These steps should be done inside the template of the NetVM to change as it relies on creating a config file that would otherwise be deleted after a reboot due to the nature of AppVMs.
|
|
|
|
Write the settings to a new file in the `/etc/NetworkManager/conf.d/` directory, such as `50-macrandomize.conf`.
|
|
The following example enables Wi-Fi and Ethernet MAC address randomization while scanning (not connected), and uses a randomly generated but persistent MAC address for each individual Wi-Fi and Ethernet connection profile.
|
|
It was inspired by the [official NetworkManager example](https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/blob/main/examples/nm-conf.d/30-anon.conf).
|
|
|
|
~~~
|
|
[device]
|
|
wifi.scan-rand-mac-address=yes
|
|
|
|
[connection]
|
|
wifi.cloned-mac-address=stable
|
|
ethernet.cloned-mac-address=stable
|
|
connection.stable-id=${CONNECTION}/${BOOT}
|
|
ipv6.dhcp-duid=stable-uuid
|
|
|
|
#the below settings is optional (see the explanations below)
|
|
ipv6.ip6-privacy=2
|
|
~~~
|
|
|
|
* `cloned-mac-address=stable` in combination with `connection.stable-id=${CONNECTION}/${BOOT}` generates a random MAC address that persists until reboot. You could use `connection.stable-id=random` instead, which generates a random MAC address each time a link goes up.
|
|
* `ipv6.dhcp-duid=stable-uuid` will prevent that the DHCP client identifier in IPv6 is looked up from a global lease file. The current default behaviour for IPv4 is to use the already random MAC as DHCP client identifier.
|
|
* `ipv6.ip6-privacy=2` will cause multiple random IPv6 addresses to be used during every session (cf. [RFC 4941](https://datatracker.ietf.org/doc/html/rfc4941)). If you want to use a fixed IPv6 address based on the already random MAC address, choose `ipv6.ip6-privacy=0`. Leaving this setting at the default is not recommended as it is basically undefined.
|
|
|
|
Also make sure that you have `addr-gen-mode=stable-privacy` in the `[ipv6]` section of your `/rw/config/NM-system-connections/*.nmconnection` files as this setting can only be set per connection.
|
|
|
|
To see all the available configuration options, refer to the man page: `man nm-settings`
|
|
|
|
You can check the MAC address currently in use by looking at the status pages of your router device(s), or inside the NetVM with the command `sudo ip link show`.
|
|
|
|
## Anonymize your hostname
|
|
|
|
DHCP requests _may_ also leak your hostname to your LAN. Since your hostname is usually `sys-net`, other network users can easily spot that you're using Qubes OS.
|
|
|
|
Unfortunately `NetworkManager` currently doesn't provide an option to disable that leak globally ([NetworkManager bug 584](https://gitlab.freedesktop.org/NetworkManager/NetworkManager/-/issues/584)).
|
|
|
|
However the `NetworkManager` versions as of Qubes OS 4.1 were found to not leak the hostname as long as the file `/etc/hostname` does **not** exist. This behaviour may be subject to change in future `NetworkManager` versions though.
|
|
So please always double check whether your hostname is leaked or not on e.g. your home router, via `wireshark` or `tcpdump`.
|
|
|
|
If you want to decide per connection, `NetworkManager` provides an option to not send the hostname:
|
|
Edit the saved connection files at `/rw/config/NM-system-connections/*.nmconnection` and add the `dhcp-send-hostname=false` line to both the `[ipv4]` and the `[ipv6]` section.
|