Git-Mirrors/Qubes-Community-Content
1
0
Fork 0
mirror of https://github.com/Qubes-Community/Contents.git synced 2024-10-01 01:05:51 -04:00
Code Issues Packages Projects Releases Wiki Activity
55ba54cebe
Qubes-Community-Content/docs/hardware/Autonomous Qubes-install (kickstart).md
Yuraeitha fd9649928d
Update Autonomous Qubes-install (kickstart).md 
Outsourcing the booting and install issues and fixes to a separate doc.
2018-06-07 13:40:14 +00:00

18 KiB
Raw Blame History

Note - Doc not finished yet!

This doc is reaching toward completion, however, has some errors that need correction first, as well as missing additions.

To-do:

  • Fix kickstart template, it has a couple of issues, like creating user account creation that does conflict with first-boot, Qubes's initial-setup.
  • Include template variants (for example to illustrate how they are modified, but this is a low-priority to-do).
  • Sorting and including/excluding the proper packages that are recommended or optional (recommended packages are high priority, optional packages are low priority).
  • Completting the sections that mention "may be included in the future" found a few places in the doc.
  • Fixing bad tips, advices or KS-template layouts (proof-reading, requires extra study/read-up (must be done before official Qubes doc PR summit), or help from someone with insight).
  • Fixing poor explanations (proof-reading).
  • Fixing typo's and spelling errors, grammer etc, (proof-reading).
  • Any feedback or contributions, like helping toward finishing the to-do, is very welcome and appreciated.

Introduction

The purpose of kickstart files is to install an operation system from start to end with less, or no human interaction at all. A kickstart file is therefore essentially a pre-configuration of any settings you may normally need to adjust during a normal Linux install. Here you may find instructions on how to get started with Qubes OS and kickstart files.

In order to avoid confusion, please note that the use of the wording kickstarter template does not refer to Qubes templates, but rather a simple configuration file, which when loaded will semi or fully Autonomously install Qubes (or fedora/redhat/cent).


Typical uses
The list is not exhausted, there may be other uses not listed here.

  • Custom Qubes OS install.
    • Please note that the kickstarter template does not use installer-default kickstarter layout, a layout which by default also is incomplete (evident by the settings and values you normally adjust during normal install of the operation-system, but are autonomously configured here in the kickstarter file).
    • A greater degree of freedom to include/exclude commands, packages, or modify variables, which may otherwise not be changeable in the default installer. This gives you greater freedom to how you want your system to be set and organized.
  • Swiftly installing or re-installing Qubes OS.
    • May be used to smoothly and quickly recover should dom0 be suspected of any compromises.
    • Various of scripts and automation can be included, to quickly restore everything in a clean state.
    • Switching, or frequently switching to new or different hardware.
  • Installing Qubes without graphic driver or card.
    • May be useful if needing to upgrade kernel, drivers, or other parts, without re-building Qubes installer or being forced to wait for a future Qubes version.
    • May be useful if installing Qubes from a remote location.
  • Installing Qubes on a larger quantity of machines.
    • Typically wanted in organizations or companies, but may also be useful for some private power-users.
  • Constructing a Qubes installer for a friend or family, who may be less advanced computer users.
    • Combine it with scripts, and they can easily recover themselves.
    • Scripts can also be used to automate other things, like restoring backups (maybe include a popup confirm message).
    • Kickstart file and all scripts can be put on the installer medium, other on a separate USB/medium. It makes it easier for the user if kept on a single device.

Once you constructed your kickstart file, using them is be faster than normal Qubes install. It may take some time in the beginning to get proper habits and adjusting your personal settings, but consider it a time investment to save time and hassles in the future. Note new Qubes version release distributions may be slightly different, sometimes this may or may not require changes to your kickstart file. Be sure to keep your kickstart file secured, or check it against any changes done by 3rd party sources. However kickstart files are simple enough to quickly review before use, be sure you check everything, packages as well.

Kickstart Template - Introduction to basics

This section provides an introduction to the basics, you may skip if you're an average terminal user, and if you know how to load a kickstart file in grub.

This particular kickstart template introduced as a finished version in the example down below, will once initiated, install Qubes fully autonomously, without any human interaction to the selected drive. Be sure you put the correct drives and configurations. If you're not sure, then please disconnect other drives to ensure you do not mistakenly overwrite drives and their potential valuable data.

Users who have NVMe disks, please use nvme0n1 instead of sda. Keep in mind if you got more than one NVMe drive, that this changes nvme0nXpY in a similar fashion to normal sdXY. For example nvme0n3 is equivalent to sdc, and nvme0n3p4 is equivalent to sdc4.

Once installed, and Qubes is booting for the first time, and if you're asked to put a new username please use the same user-name in the Qubes initial-setup as you have put in your kickstart file.

Kickstart files are very easy to use and initiated. Whether on the installer medium or on a seperate medium, you just need to include the kickstart file location in the installer command line. For Qubes 4, press the Tab key at early Qubes installer boot stage, before you start the installer. Insert ks=hd:sda:/ks.cfg. Keep in mind it can be modified logically. If the ks.cfg is named differently, if its in a folder, if you're using a different device (like for example sdc4), or you're pulling it from a network location, etc. Please look it up if more is needed to config.

Copy and paste the below into a text editor, use nano, vi, or which text editor you prefer. Edit it to your needs, don't run it without first checking account details and drive install location. The name of the kickstart file is optional, but it must always end with .cfg. Naming it ks.cfg is recommended. Simply move it to anywhere the installer can reach it when booting, whether using the same medium or an extra separate medium.

You may use any terminal to identify a second medium's location. But remember if you unplug, or shutdown the machine after plugging in two or more medium devices, that their hierarchy may change. Sometimes a machines BIOS/UEFI may behave oddly in this manner. Keep this in mind if you cannot start/load the kickstart file. Installer will inform you before it starts making changes to the drive, if the kickstart file cannot be found, or if there are instructions it cannot understand in the kickstart file.

Kickstart Template - Adjusting your modifications

All variables that needs changing, are labelled change, which include credentials, drive letters, timezones, language. Scroll below the template to find instructions on how to adjust values, revoming or including commands, package inclusion, etc.

# Kickstart file, preconfiguring the Qubes installer settings.

# Initializing installer
cdrom
text

# Protective measures, including redundancy measures.
ignoredisk --only-use=change
firewall
network  --hostname=dom0
authconfig --enableshadow --passalgo=sha512
sshpw --lock
rootpw --lock

# Account details
keyboard --vckeymap=change --xlayouts='change'
lang en_change.UTF-8
timezone change/change --isUtc
user --groups=wheel,qubes --name=change --password=change --iscryped

# Disk and Partitioning
bootloader --location=mbr --boot-drive=change --password=change --iscrypted
clearpart --all --initlabel --drives=change
autopart

# Boot settings
xconfig  --startxonboot
firstboot --enable


%packages
@^qubes-xfce

%end


%anaconda
pwpolicy root --minlen=0 --minquality=1 --notstrict --nochanges --emptyok
pwpolicy user --minlen=0 --minquality=1 --notstrict --nochanges --emptyok
pwpolicy luks --minlen=0 --minquality=1 --notstrict --nochanges --emptyok
%end

Adjusting credentials and encryption

  • All variables that needs changing, are labelled change, which include credentials, drive letters, timezones, language.
  • Securing passwords - The kickstart file can include passwords in plaintext, in which you simply write your password directly in the kickstarter file (not recommended), or with encrypted format (recommended). The ´--plaintext´ flag after passwords will instruct the use of plaintext in password databases, while ´--iscrypted´ flag after passwords will instruct to use hashed password values.
    • Note that pre-hashing your passwords is important if your kickstart file is ever discovered. It may be best to assume the worst, so it is recommended to always use --isencrypted flag and include the hashed password values.
    • Basics of salt encryption - Only creating hash values for your passwords is not enough to protect them, further protective measures are needed to increase the difficulty to gaining access, especially if you're using a short non-truly random password. This can be done by using salt encryption, which will generate a different hash value, even if you re-generate the same salt salted password again. Note that it will work on different machines even if the same password uses a different hash value, this is because the salted hash value includes the encrypted instructions that the encryption algorithm will read and understand, and ultimately in a more secure manner obtain the real hash for your password. Therefore it's fine to create your salted passwords elsewhere, whether on the same or a different secured system. Salt encrypted hashed passwords can only be understood by the legitimate programs, so be sure you do not mix them up with each others below. User login for grub2 encrypyion is always root. If you're curious to learn more, then you may find extra reading in the external sources headline further down below.
  • Grub2 encryption - If you need to generate a hash password for the ´--iscrypted´ flag, then you can generate grub2 salted hash values in any secure terminal with grub2 installed. You may freely use any system, however make sure it is not compromised. Copy the whole line, starting from ´grub.pbkdf2.sha512...´.
  • Protecting the user-account - Similar as for enhanced grub2 encryption, you may use ´--iscrypted´ to your user Linux profile, but keep in mind that Linux uses a different salt algorithm from grub2, so you'll need to adjust accordingly. Copy/paste this termianl to a clean dispVM, or use a clean fresh AppVM; python -c 'import crypt,getpass;pw=getpass.getpass();print(crypt.crypt(pw) if (pw==getpass.getpass("Confirm: ")) else exit())'. Just like with grub2, it'll ask for a password and a confirmation, before printing your salted hash. Copy/paste your hash value into the kickstart file user account password field.
  • Account name - If you haven't already donr so, feel free to change it to any desired name.
  • LUKS disk encryption - Will be included before official Qubes doc PR.
  • If you prefer not to encrypt grub2 - To disable, remove --password=change --iscrypted from the bootloader kickstarter line.
  • If you prefer not to encrypt disk - Will be included before official Qubes doc PR.

Adjusting drive letters

  • All variables that needs changing, are labelled change, which include credentials, drive letters, timezones, language.
  • Will be included before official Qubes doc PR.

Adjusting timezones and language

  • All variables that needs changing, are labelled change, which include credentials, drive letters, timezones, language.
  • Will be included before official Qubes doc PR.

Adjusting included packages

Optional package list List is not finished, will be updated.

@base
@base-x
@xfce-desktop-qubes
@xfce-extra-plugins
@xfce-media
@kde-desktop-qubes
@sound-basic
@fonts
@hardware-support
@qubes
@anaconda-tools

Including or excluding kickstart commands

  • Will be included before official Qubes doc PR.

Kickstart uses gone wrong - Examples to avoid

  • Keep any fully autonomous kickstart USB's, or the medium of choice, locked-up, properly labelled, or avoid other scenarios where it may mistakenly be booted, by you or someone else.
    • It may be useful to have at least one manual option to select, before the installer starts on its own.
  • If you have other partitions or drives, be extremely careful and delicate.
    • Think at least twice before you boot from the kickstart file, so you don't overwrite anything important.
    • If you're not 100% sure of what you're doing, then pull out the other drives first. The kickstart file may install on the wrong drive or partitions if it is not set correctly.
  • When making semi kickstart files, be mindful of which settings that need to be disabled in order for the kickstart file to properly halt.

Qubes kickstart usage: Tips and tricks that may make a difference

  • Graphics issues
    • If you're trying to get Qubes installed, for example on a machine without graphics, and you need sys-net and sys-firewall to update and repair dom0, then you may want to insert a network cable that does not require a password.
    • If you do not have an RJ45 network port, then you can permanently or temporarily move the USB controller into your sys-net. Tell the Qubes installers initial setup at first boot, to make sys-net include sys-usb, so that sys-net holds your USB controllers. This way you can find your, or buy, a cheap USB to RJ45 network converter.
    • Instructions on how to enable password based networking without graphic drivers are possible, like wireless networking. But in its current form is not included in this doc. It may however be included in the future.
  • Updating Qubes offline (without network)
    • Instructions on how to securely download updates on a different computer and install via USB or other mediums is possible. May be included in the future.
  • Reaching dom0 Terminal
    • Five different easy ways to get terminal on an empty system, to identity drive order/numbers.
    • Let the Qubes installer boot normally. When or if it fails, switch to tty2 or tty3 to get terminal. If this does not work (it may sometimes not be reachable on a failed boot), then proceed to next point below.
    • Put the number 3 after quiet in the boot Linux boot parameters. This boots the system into a non-graphical dom0 terminal (similar effect to using tty#).
    • Boot from the Qubes installer, pick troubleshoot, and then the option to rescue an existing Qubes system (even if there is no Qubes system installed). When requested to pick between 4-5 options, kick the skip to shell (if you only need to do lsblk for disk information, then this is sufficient), or continue into existing Qubes dom0 if you need it for other extra reasons.
    • Use a Live boot from a different distro, however unlike the above, this does not load most or all Qubes sub-systems, and also risks exposing dom0. This is the least desired method.
      • Preferably use another Linux distro you trust. For example Fedora live, the distro which dom0 is based on.
      • The Qubes Live (Alpha) medium may also work, however this is currently untested. Using any of the first 3 options above should be sufficient.

Qubes booting: Tips and tricks that may make a difference

General issues with Qubes booting or installing issues can be found here found here. Be mindful that you may, or may not, need to combine these two docs (depending on if you got multiple boot/install problems). For example you may need to fix the booting issues, but the kickstart file may still be helpful if you encounter some types of install issues, or graphic-boot issues during the installer (where graphics can be fixed later, once succeeding in text-mode install).

Insight, guides, and other external resources



Consideration before submitting updates to this doc

This doc is originally submitted by the fully independent volunteer group, Qubes Community Collaboration (QCC). You're naturally free to submit improvements of this doc to the Qubes OS staff for review on your own , but you can also choose to go through our channels at https://github.com/Qubes-Community/Contents/issues if you would like to improve the doc through the community collaboration. Feel free to start up an issue at QCC to discuss this doc and how to proceed. This potentially saves the Qubes OS staff time and resources, while still preserving transparency, and it helps improving doc PR summits further when worked out, improved, and shaped by a community. If its your first time submitting to GitHub but you would like to be independent, then we at QCC still encourage you get some GitHub experience through our channels first, before submitting anything official Qubes OS on your own. Credit to author(s) will always be preserved.