mirror of
https://github.com/Qubes-Community/Contents.git
synced 2024-12-24 14:49:29 -05:00
125 lines
6.5 KiB
Markdown
125 lines
6.5 KiB
Markdown
|
|
Anonymizing your MAC Address
|
|
============================
|
|
|
|
Although it is not the only metadata broadcast by network hardware, changing the default [MAC Address](https://en.wikipedia.org/wiki/MAC_address) of your hardware could be [an important step in protecting privacy](https://tails.boum.org/contribute/design/MAC_address/#index1h1).
|
|
Currently, Qubes OS *does not* automatically "anonymize" or spoof the MAC Address, so unless this gets implemented by default you can randomize your MAC Address with the following guide.
|
|
|
|
|
|
## Upgrading and configuring Network Manager in Qubes
|
|
|
|
Newer versions of Network Manager have options for randomizing MAC addresses, and can handle the entire process across reboots, sleep/wake cycles and different connection states.
|
|
In particular, versions 1.4.2 and later should be well suited for Qubes. Qubes R4.0's default sys-net should have 1.8.2-4 by default.
|
|
However, use of the NetworkManager GUI to set these options is **unreliable** - there are numerous reports of changes not being saved for particular cards or interfaces.
|
|
You should check carefully that any settings you make in the GUI are saved, before relying on this method.
|
|
If the settings are not saved, you can use the method described below using a config file.
|
|
|
|
|
|
Network Manager 1.4.2 or later is available from the Fedora 25 repository as well as the Debian 10 repository.
|
|
|
|
Check that Network Manager version is now at least 1.4.2:
|
|
|
|
~~~
|
|
$ sudo NetworkManager -V
|
|
1.4.2
|
|
~~~
|
|
|
|
## Randomize a single connection
|
|
|
|
Right click on the Network Manager icon of your NetVM in the tray and click 'Edit Connections..'.
|
|
|
|
Select the connection to randomize and click Edit.
|
|
|
|
Select the Cloned MAC Address drop down and set to Random or Stable.
|
|
Stable will generate a random address that persists until reboot, while Random will generate an address each time a link goes up.
|
|
|
|
|
|
Save the change and reconnect the connection (click on Network Manager tray icon and click disconnect under the connection, it should automatically reconnect).
|
|
|
|
## Randomize all Ethernet and Wifi connections
|
|
|
|
These steps should be done inside a template to be used to create a NetVM as it relies on creating a config file that would otherwise be deleted after a reboot due to the nature of AppVMs.
|
|
|
|
Write the settings to a new file in the `/etc/NetworkManager/conf.d/` directory, such as `00-macrandomize.conf`.
|
|
The following example enables Wifi and Ethernet MAC address randomization while scanning (not connected), and uses a randomly generated but persistent MAC address for each individual Wifi and Ethernet connection profile.
|
|
|
|
~~~
|
|
[device]
|
|
wifi.scan-rand-mac-address=yes
|
|
|
|
[connection]
|
|
wifi.cloned-mac-address=stable
|
|
ethernet.cloned-mac-address=stable
|
|
connection.stable-id=${CONNECTION}/${BOOT}
|
|
~~~
|
|
|
|
* `stable` in combination with `${CONNECTION}/${BOOT}` generates a random address that persists until reboot.
|
|
* `random` generates a random address each time a link goes up.
|
|
|
|
To see all the available configuration options, refer to the man page: `man nm-settings`
|
|
|
|
Next, create a new NetVM using the edited template and assign network devices to it.
|
|
|
|
Finally, shutdown all VMs and change the settings of sys-firewall, etc. to use the new NetVM.
|
|
|
|
You can check the MAC address currently in use by looking at the status pages of your router device(s), or inside the NetVM with the command `sudo ip link show`.
|
|
|
|
## Anonymize your hostname
|
|
|
|
DHCP requests also leak your hostname to your LAN. Since your hostname is usually `sys-net`, other network users can easily spot that you're using Qubes OS.
|
|
|
|
Unfortunately `NetworkManager` currently doesn't provide an option to disable that leak globally ([Gnome Bug 768076](https://bugzilla.gnome.org/show_bug.cgi?id=768076)). However the below alternatives exist.
|
|
|
|
### Prevent hostname sending
|
|
|
|
`NetworkManager` can be configured to use `dhclient` for DHCP requests. `dhclient` has options to prevent the hostname from being sent. To do that, add a file to your `sys-net` template (usually the Fedora or Debian base template) named e.g. `/etc/NetworkManager/conf.d/dhclient.conf` with the following content:
|
|
```
|
|
[main]
|
|
dhcp=dhclient
|
|
```
|
|
Afterwards edit `/etc/dhcp/dhclient.conf` and remove or comment out the line starting with `send host-name`.
|
|
|
|
If you want to decide per connection, `NetworkManager` also provides an option to not send the hostname:
|
|
Edit the saved connection files at `/rw/config/NM-system-connections/*.nmconnection` and add the `dhcp-send-hostname=false` line to both the `[ipv4]` and the `[ipv6]` section.
|
|
|
|
### Randomize the hostname
|
|
|
|
Alternatively you may use the following code to assign a random hostname to a VM during each of its startup. Please follow the instructions mentioned in the beginning to properly install it.
|
|
|
|
```.bash
|
|
#!/bin/bash
|
|
set -e -o pipefail
|
|
#
|
|
# Set a random hostname for a VM session.
|
|
#
|
|
# Instructions:
|
|
# 1. This file must be placed and made executable (owner: root) inside the template VM of your network VM such that it will be run before your hostname is sent over a network.
|
|
# In a Fedora template, use `/etc/NetworkManager/dispatcher.d/pre-up.d/00_hostname`.
|
|
# In a Debian template, use `/etc/network/if-pre-up.d/00_hostname`.
|
|
# 2. Execute `sudo touch /etc/hosts.lock` inside the template VM of your network VM.
|
|
# 3. Execute inside your network VM:
|
|
# `sudo bash -c 'mkdir -p /rw/config/protected-files.d/ && echo -e "/etc/hosts\n/etc/hostname" > /rw/config/protected-files.d/protect_hostname.txt'`
|
|
|
|
|
|
#NOTE: mv is atomic on most systems
|
|
if [ -f "/rw/config/protected-files.d/protect_hostname.txt" ] && rand="$RANDOM" && mv "/etc/hosts.lock" "/etc/hosts.lock.$rand" ; then
|
|
name="PC-$rand"
|
|
echo "$name" > /etc/hostname
|
|
hostname "$name"
|
|
#NOTE: NetworkManager may set it again after us based on DHCP or /etc/hostname, cf. `man NetworkManager.conf` @hostname-mode
|
|
|
|
#from /usr/lib/qubes/init/qubes-early-vm-config.sh
|
|
if [ -e /etc/debian_version ]; then
|
|
ipv4_localhost_re="127\.0\.1\.1"
|
|
else
|
|
ipv4_localhost_re="127\.0\.0\.1"
|
|
fi
|
|
sed -i "s/^\($ipv4_localhost_re\(\s.*\)*\s\).*$/\1${name}/" /etc/hosts
|
|
sed -i "s/^\(::1\(\s.*\)*\s\).*$/\1${name}/" /etc/hosts
|
|
fi
|
|
exit 0
|
|
```
|
|
Assuming that you're using `sys-net` as your network VM, your `sys-net` hostname should now be `PC-[number]` with a different `[number]` each time your `sys-net` is started.
|
|
|
|
Please note that the above script should _not_ be added to [/rw/config/rc.local](https://www.qubes-os.org/doc/config-files/)) as that is executed only _after_ the network fully started.
|