Working

Modem/cfg/cfg_ser.h

@@ -0,0 +1,222 @@
+/**
+ * \file
+ * <!--
+ * This file is part of BeRTOS.
+ *
+ * Bertos is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * As a special exception, you may use this file as part of a free software
+ * library without restriction.  Specifically, if other files instantiate
+ * templates or use macros or inline functions from this file, or you compile
+ * this file and link it with other files to produce an executable, this
+ * file does not by itself cause the resulting executable to be covered by
+ * the GNU General Public License.  This exception does not however
+ * invalidate any other reasons why the executable file might be covered by
+ * the GNU General Public License.
+ *
+ * Copyright 2008 Develer S.r.l. (http://www.develer.com/)
+ * All Rights Reserved.
+ * -->
+ *
+ * \brief Configuration file for serial module.
+ *
+ * \author Daniele Basile <asterix@develer.com>
+ */
+
+#ifndef CFG_SER_H
+#define CFG_SER_H
+
+/**
+ * Example of setting for serial port and
+ * spi port.
+ * Edit these define for your project.
+ */
+
+/**
+ * Size of the outbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_UART0_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ */
+#define CONFIG_UART0_RXBUFSIZE  32
+
+/**
+ * Size of the outbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
+#define CONFIG_UART1_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2 or (at91 and not atmega8 and not atmega168 and not atmega32)"
+ */
+#define CONFIG_UART1_RXBUFSIZE  32
+
+/**
+ * Size of the outbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2"
+ */
+#define CONFIG_UART2_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 2 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lm3s or lpc2"
+ */
+#define CONFIG_UART2_RXBUFSIZE  32
+
+/**
+ * Size of the outbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2"
+ */
+#define CONFIG_UART3_TXBUFSIZE  32
+
+/**
+ * Size of the inbound FIFO buffer for port 3 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "lpc2"
+ */
+#define CONFIG_UART3_RXBUFSIZE  32
+
+
+/**
+ * Size of the outbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_TXBUFSIZE    32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_RXBUFSIZE    32
+
+/**
+ * Size of the outbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI0_TXBUFSIZE	32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port 0 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI0_RXBUFSIZE	32
+
+/**
+ * Size of the outbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI1_TXBUFSIZE	32
+
+/**
+ * Size of the inbound FIFO buffer for SPI port 1 [bytes].
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 2
+ * $WIZ$ supports = "at91"
+ */
+#define CONFIG_SPI1_RXBUFSIZE	32
+
+/**
+ * SPI data order.
+ *
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_order_bit"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_DATA_ORDER	SER_MSB_FIRST
+
+/**
+ * SPI clock division factor.
+ * $WIZ$ type = "int"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_DIV	16
+
+/**
+ * SPI clock polarity: normal low or normal high.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_pol"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_POL        SPI_NORMAL_LOW
+
+/**
+ * SPI clock phase you can choose sample on first edge or
+ * sample on second clock edge.
+ * $WIZ$ type = "enum"
+ * $WIZ$ value_list = "ser_spi_phase"
+ * $WIZ$ supports = "avr"
+ */
+#define CONFIG_SPI_CLOCK_PHASE	    SPI_SAMPLE_ON_FIRST_EDGE
+
+/**
+ * Default transmit timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
+#define CONFIG_SER_TXTIMEOUT    -1
+
+/**
+ * Default receive timeout (ms). Set to -1 to disable timeout support.
+ * $WIZ$ type = "int"
+ * $WIZ$ min = -1
+ */
+#define CONFIG_SER_RXTIMEOUT    -1
+
+/**
+ * Use RTS/CTS handshake.
+ * $WIZ$ type = "boolean"
+ * $WIZ$ supports = "False"
+ */
+#define CONFIG_SER_HWHANDSHAKE   0
+
+/**
+ * Default baudrate for all serial ports (set to 0 to disable).
+ * $WIZ$ type = "int"
+ * $WIZ$ min = 0
+ */
+#define CONFIG_SER_DEFBAUDRATE   0UL
+
+/// Enable strobe pin for debugging serial interrupt. $WIZ$ type = "boolean"
+#define CONFIG_SER_STROBE        0
+
+#endif /* CFG_SER_H */