The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
A reactor was being passed instead of a whitelist for the BlacklistingAgentWrapper
used by the WellyKnownResolver. This coulld cause exceptions when attempting to
connect to IP addresses that are blacklisted, but in reality this did not have any
observable affect since this code is not used for IP literals.
If a user tries to do UI Auth via SSO, but uses the wrong account on the SSO
IdP, try to give them a better error.
Previously, the UIA would claim to be successful, but then the operation in
question would simply fail with "auth fail". Instead, serve up an error page
which explains the failure.
This checks that the domain given to `DomainSpecificString.is_valid` (e.g.
`UserID`, `RoomAlias`, etc.) is of a valid form. Previously some validation
was done on the localpart (e.g. the sigil), but not the domain portion.
Some light refactoring of OidcHandler, in preparation for bigger things:
* remove inheritance from deprecated BaseHandler
* add an object to hold the things that go into a session cookie
* factor out a separate class for manipulating said cookies
If we have integrations with multiple identity providers, when the user does a UI Auth, we need to redirect them to the right one.
There are a few steps to this. First of all we actually need to store the userid of the user we are trying to validate in the UIA session, since the /auth/sso/fallback/web request is unauthenticated.
Then, once we get the /auth/sso/fallback/web request, we can fish the user id out of the session, and use it to look up the external id mappings, and hence pick an SSO provider for them.
SynapseRequest is in danger of becoming a bit of a dumping-ground for "useful stuff relating to Requests",
which isn't really its intention (its purpose is to override render, finished and connectionLost to set up the
LoggingContext and write the right entries to the request log).
Putting utility functions inside SynapseRequest means that lots of our code ends up requiring a
SynapseRequest when there is nothing synapse-specific about the Request at all, and any old
twisted.web.iweb.IRequest will do. This increases code coupling and makes testing more difficult.
In short: move get_user_agent out to a utility function.
You can't continue using a transaction once an exception has been
raised, so catching and dropping the error here is pointless and just
causes more errors.
GET /_synapse/admin/v1/rooms/<identifier>/forward_extremities now gets forward extremities for a room, returning count and the list of extremities.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
This adds an admin API that allows a server admin to get power in a room if a local user has power in a room. Will also invite the user if they're not in the room and its a private room. Can specify another user (rather than the admin user) to be granted power.
Co-authored-by: Matthew Hodgson <matthew@matrix.org>
This had two effects 1) it'd give the wrong answer and b) would iterate
*all* power levels in the auth chain of each event. The latter of which
can be *very* expensive for certain types of IRC bridge rooms that have
large numbers of power level changes.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
* Factor out _call_attribute_mapper and _register_mapped_user
This is mostly an attempt to simplify `get_mxid_from_sso`.
* Move mapping_lock down into SsoHandler.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
* SsoHandler: remove inheritance from BaseHandler
* Simplify the flow for SSO UIA
We don't need to do all the magic for mapping users when we are doing UIA, so
let's factor that out.
* Call set_avatar_url with target_user, not user_id
Fixes https://github.com/matrix-org/synapse/issues/8871
* Create 8872.bugfix
* Update synapse/rest/admin/users.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Testing
* Update changelog.d/8872.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
-----BEGIN PGP SIGNATURE-----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=is1Y
-----END PGP SIGNATURE-----
Merge tag 'v1.24.0rc2' into develop
Synapse 1.24.0rc2 (2020-12-04)
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
This removes the version pin of the `prometheus_client` dependency, in direct response to #8831. If merged, this will close#8831
As far as I can tell, no other changes are needed, but as I'm no synapse expert, I'm relying heavily on CI and maintainer reviews for this. My very primitive test of synapse with prometheus_client v0.9.0 on my home server didn't bring up any issues, so we'll see what happens.
Signed-off-by: Jordan Bancino
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
It's important that we make sure our background updates happen in a defined
order, to avoid disasters like #6923.
Add an ordering to all of the background updates that have landed since #7190.
This applies even if the feature is disabled at the server level with `allow_per_room_profiles`.
The server notice not being a real user it doesn't have an user profile.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
This PR grew out of #6739, and adds typing to some method arguments
You'll notice that there are a lot of `# type: ignores` in here. This is due to the base methods not matching the overloads here. This is necessary to stop mypy complaining, but a better solution is #8828.
We can get a SIGHUP at any point, including times where we are not in a
sane state. By deferring calling the handlers until the next reactor
tick we ensure that we don't get unexpected conflicts, e.g. trying to
flush logs from the signal handler while the code was in the process of
writing a log entry.
Fixes#8769.
When server URL provided to register_new_matrix_user includes path
component (e.g. "http://localhost:8008/"), the command fails with
"ERROR! Received 400 Bad Request". Stripping trailing slash from the
server_url command argument makes sure combined endpoint URL remains
valid.
Signed-off-by: Dmitry Borodaenko angdraug@debian.org
This is another PR that grew out of #6739.
The existing code for checking whether a user is currently invited to a room when they want to leave the room looks like the following:
f737368a26/synapse/handlers/room_member.py (L518-L540)
It calls `get_invite_for_local_user_in_room`, which will actually query *all* rooms the user has been invited to, before iterating over them and matching via the room ID. It will then return a tuple of a lot of information which we pull the event ID out of.
I need to do a similar check for knocking, but this code wasn't very efficient. I then tried to write a different implementation using `StateHandler.get_current_state` but this actually didn't work as we haven't *joined* the room yet - we've only been invited to it. That means that only certain tables in Synapse have our desired `invite` membership state. One of those tables is `local_current_membership`.
So I wrote a store method that just queries that table instead
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
* Make this line debug (it's noisy)
* Don't include from_key for presence if we are at 0
* Limit read receipts for all rooms to 100
* changelog.d/8744.bugfix
* Allow from_key to be None
* Update 8744.bugfix
* The from_key is superflous
* Update comment
`_locally_reject_invite` generates an out-of-band membership event which can be passed to clients, but not other homeservers.
This is used when we fail to reject an invite over federation. If this happens, we instead just generate a leave event locally and send it down /sync, allowing clients to reject invites even if we can't reach the remote homeserver.
A similar flow needs to be put in place for rescinding knocks. If we're unable to contact any remote server from the room we've tried to knock on, we'd still like to generate and store the leave event locally. Hence the need to reuse, and thus generalise, this method.
Separated from #6739.
There's a handy function called maybe_store_room_on_invite which allows us to create an entry in the rooms table for a room and its version for which we aren't joined to yet, but we can reference when ingesting events about.
This is currently used for invites where we receive some stripped state about the room and pass it down via /sync to the client, without us being in the room yet.
There is a similar requirement for knocking, where we will eventually do the same thing, and need an entry in the rooms table as well. Thus, reusing this function works, however its name needs to be generalised a bit.
Separated out from #6739.
The main use case is to see how many requests are being made, and how
many are second/third/etc attempts. If there are large number of retries
then that likely indicates a delivery problem.
This should hopefully speed up `get_auth_chain_difference` a bit in the case of repeated state res on the same rooms.
`get_auth_chain_difference` does a breadth first walk of the auth graphs by repeatedly looking up events' auth events. Different state resolutions on the same room will end up doing a lot of the same event to auth events lookups, so by caching them we should speed things up in cases of repeated state resolutions on the same room.
`adbapi.ConnectionPool` let's you turn on auto reconnect of DB connections. This is off by default.
As far as I can tell if its not enabled dead connections never get removed from the pool.
Maybe helps #8574
* Check support room has only two users
* Create 8728.bugfix
* Update synapse/server_notices/server_notices_manager.py
Co-authored-by: Erik Johnston <erik@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
This PR fixes two things:
* Corrects the copy/paste error of telling the client their displayname is wrong when they are submitting an `avatar_url`.
* Returns a `M_INVALID_PARAM` instead of `M_UNKNOWN` for non-str type parameters.
Reported by @t3chguy.
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
Cached functions accept an `on_invalidate` function, which we failed to add to the type signature. It's rarely used in the files that we have typed, which is why we haven't noticed it before.
otherwise non-state events get written as `<FrozenEvent ... state_key='None'>`
which is indistinguishable from state events with the actual state_key `None`.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
