We checked that 3pids were not already in use before we checked if
we were going to return the account previously registered in the
same UI auth session, in which case the 3pids will definitely
be in use.
https://github.com/vector-im/riot-web/issues/9586
Prevents a SynapseError being raised inside of a IResolutionReceiver and instead opts to just return 0 results. This thus means that we have to lump a failed lookup and a blacklisted lookup together with the same error message, but the substitute should be generic enough to cover both cases.
It's more natural for the user if the bit that takes them away
from the registration flow comes last. Adding the dummy stage allows
us to do the stages in this order without the ambiguity.
This allows the client to complete the email last which is more
natual for the user. Without this stage, if the client would
complete the recaptcha (and terms, if enabled) stages and then the
registration request would complete because you've now completed a
flow, even if you were intending to complete the flow that's the
same except has email auth at the end.
Adding a dummy auth stage to the recaptcha-only flow means it's
always unambiguous which flow the client was trying to complete.
Longer term we should think about changing the protocol so the
client explicitly says which flow it's trying to complete.
vector-im/riot-web#9586
This allows the client to complete the email last which is more
natual for the user. Without this stage, if the client would
complete the recaptcha (and terms, if enabled) stages and then the
registration request would complete because you've now completed a
flow, even if you were intending to complete the flow that's the
same except has email auth at the end.
Adding a dummy auth stage to the recaptcha-only flow means it's
always unambiguous which flow the client was trying to complete.
Longer term we should think about changing the protocol so the
client explicitly says which flow it's trying to complete.
https://github.com/vector-im/riot-web/issues/9586
This commit adds two config options:
* `restrict_public_rooms_to_local_users`
Requires auth to fetch the public rooms directory through the CS API and disables fetching it through the federation API.
* `require_auth_for_profile_requests`
When set to `true`, requires that requests to `/profile` over the CS API are authenticated, and only returns the user's profile if the requester shares a room with the profile's owner, as per MSC1301.
MSC1301 also specifies a behaviour for federation (only returning the profile if the server asking for it shares a room with the profile's owner), but that's currently really non-trivial to do in a not too expensive way. Next step is writing down a MSC that allows a HS to specify which user sent the profile query. In this implementation, Synapse won't send a profile query over federation if it doesn't believe it already shares a room with the profile's owner, though.
Groups have been intentionally omitted from this commit.
This endpoint isn't much use for its intended purpose if you first need to get
yourself an admin's auth token.
I've restricted it to the `/_synapse/admin` path to make it a bit easier to
lock down for those concerned about exposing this information. I don't imagine
anyone is using it in anger currently.
By default the homeserver will use the identity server used during the
binding of the 3PID to unbind the 3PID. However, we need to allow
clients to explicitly ask the homeserver to unbind via a particular
identity server, for the case where the 3PID was bound out of band from
the homeserver.
Implements MSC915.
Adds a new method, check_3pid_auth, which gives password providers
the chance to allow authentication with third-party identifiers such
as email or msisdn.
Currently the explanation message is sent to the abuse room before any
users are forced joined, which means it tends to get lost in the backlog
of joins.
So instead we send the message *after* we've forced joined everyone.
* Rate-limiting for registration
* Add unit test for registration rate limiting
* Add config parameters for rate limiting on auth endpoints
* Doc
* Fix doc of rate limiting function
Co-Authored-By: babolivier <contact@brendanabolivier.com>
* Incorporate review
* Fix config parsing
* Fix linting errors
* Set default config for auth rate limiting
* Fix tests
* Add changelog
* Advance reactor instead of mocked clock
* Move parameters to registration specific config and give them more sensible default values
* Remove unused config options
* Don't mock the rate limiter un MAU tests
* Rename _register_with_store into register_with_store
* Make CI happy
* Remove unused import
* Update sample config
* Fix ratelimiting test for py2
* Add non-guest test
This allows registration to be handled by a worker, though the actual
write to the database still happens on master.
Note: due to the in-memory session map all registration requests must be
handled by the same worker.
* Correctly retry and back off if we get a HTTPerror response
* Refactor request sending to have better excpetions
MatrixFederationHttpClient blindly reraised exceptions to the caller
without differentiating "expected" failures (e.g. connection timeouts
etc) versus more severe problems (e.g. programming errors).
This commit adds a RequestSendFailed exception that is raised when
"expected" failures happen, allowing the TransactionQueue to log them as
warnings while allowing us to log other exceptions as actual exceptions.
Allow for the creation of a support user.
A support user can access the server, join rooms, interact with other users, but does not appear in the user directory nor does it contribute to monthly active user limits.
This implements both a SAML2 metadata endpoint (at
`/_matrix/saml2/metadata.xml`), and a SAML2 response receiver (at
`/_matrix/saml2/authn_response`). If the SAML2 response matches what's been
configured, we complete the SSO login flow by redirecting to the client url
(aka `RelayState` in SAML2 jargon) with a login token.
What we don't yet have is anything to build a SAML2 request and redirect the
user to the identity provider. That is left as an exercise for the reader.
This is mostly factoring out the post-CAS-login code to somewhere we can reuse
it for other SSO flows, but it also fixes the userid mapping while we're at it.
* Rip out half-implemented m.login.saml2 support
This was implemented in an odd way that left most of the work to the client, in
a way that I really didn't understand. It's going to be a pain to maintain, so
let's start by ripping it out.
* drop undocumented dependency on dateutil
It turns out we were relying on dateutil being pulled in transitively by
pysaml2. There's no need for that bloat.
* Clean up the CSS for the fallback login form
I was finding this hard to work with, so simplify a bunch of things. Each
flow is now a form inside a div of class login_flow.
The login_flow class now has a fixed width, as that looks much better than each
flow having a differnt width.
* Support m.login.sso
MSC1721 renames m.login.cas to m.login.sso. This implements the change
(retaining support for m.login.cas for older clients).
* changelog
Currently when fetching state groups from the data store we make two
hits two the database: once for members and once for non-members (unless
request is filtered to one or the other). This adds needless load to the
datbase, so this PR refactors the lookup to make only a single database
hit.
Broadly three things here:
* disable W504 which seems a bit whacko
* remove a bunch of `as e` expressions from exception handlers that don't use
them
* use `r""` for strings which include backslashes
Also, we don't use pep8 any more, so we can get rid of the duplicate config
there.
Wrap calls to deferToThread() in a thing which uses a child logcontext to
attribute CPU usage to the right request.
While we're in the area, remove the logcontext_tracer stuff, which is never
used, and afaik doesn't work.
Fixes#4064
Synapse doesn’t allow for media resources to be played directly from
Chrome. It is a problem for users on other networks (e.g. IRC)
communicating with Matrix users through a gateway. The gateway sends
them the raw URL for the resource when a Matrix user uploads a video
and the video cannot be played directly in Chrome using that URL.
Chrome argues it is not authorized to play the video because of the
Content Security Policy. Chrome checks for the "media-src" policy which
is missing, and defauts to the "default-src" policy which is "none".
As Synapse already sends "object-src: 'self'" I thought it wouldn’t be
a problem to add "media-src: 'self'" to the CSP to fix this problem.
ExpiringCache required that `start()` be called before it would actually
start expiring entries. A number of places didn't do that.
This PR removes `start` from ExpiringCache, and automatically starts
backround reaping process on creation instead.
Continues from uhoreg's branch
This just fixed the errcode on /room_keys/version if no backup and
updates the schema delta to be on the latest so it gets run
Older identity servers may not support the unbind 3pid request, so we
shouldn't fail the requests if we received one of 400/404/501. The
request still fails if we receive e.g. 500 responses, allowing clients
to retry requests on transient identity server errors that otherwise do
support the API.
Fixes#3661
