This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
Autocommit means that we don't wrap the functions in transactions, and instead get executed directly. Introduced in #8456. This will help:
1. reduce the number of `could not serialize access due to concurrent delete` errors that we see (though there are a few functions that often cause serialization errors that we don't fix here);
2. improve the DB performance, as it no longer needs to deal with the overhead of `REPEATABLE READ` isolation levels; and
3. improve wall clock speed of these functions, as we no longer need to send `BEGIN` and `COMMIT` to the DB.
Some notes about the differences between autocommit mode and our default `REPEATABLE READ` transactions:
1. Currently `autocommit` only applies when using PostgreSQL, and is ignored when using SQLite (due to silliness with [Twisted DB classes](https://twistedmatrix.com/trac/ticket/9998)).
2. Autocommit functions may get retried on error, which means they can get applied *twice* (or more) to the DB (since they are not in a transaction the previous call would not get rolled back). This means that the functions need to be idempotent (or otherwise not care about being called multiple times). Read queries, simple deletes, and updates/upserts that replace rows (rather than generating new values from existing rows) are all idempotent.
3. Autocommit functions no longer get executed in [`REPEATABLE READ`](https://www.postgresql.org/docs/current/transaction-iso.html) isolation level, and so data can change queries, which is fine for single statement queries.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAl9+7JIQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCUc1B/9Bz8uAEJWX9qahuWZGrsvj0ukF/9O6YWrU
ZZGHnyaAXg4MF0lR6DVCV2NhW/l3RWO01G/LgGT//0vac+EFxWDbjuaHP9pRVBln
02TQpn12ceZtW/n+X+8wmQzfSn1zNWRUycV43MyGu49z3IAG7KVjjVDQPkY0mEHC
h6THy30SYIOKDCdXUUL9i+sV1JLzKPX0NlzO3ONKe2LbfLiBTvdfDRlZGq6rJu5H
GAsIPwgadhanhXBPhG4WrealG31TkcPbZCwFMv9aFzltU841jps+QN6OKvbGFVer
FboD2df0ZJqKNJOJVVlOMs7I5uSYbrg+n1zolZfrbo0lk/xEyIAT
=F5cw
-----END PGP SIGNATURE-----
Merge tag 'v1.21.0rc3' into develop
Synapse 1.21.0rc3 (2020-10-08)
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
Currently when using multiple event persisters we (in the worst case) don't tell clients about events until all event persisters have persisted new events after the original event. This is a suboptimal, especially if one of the event persisters goes down.
To handle this, we encode the position of each event persister in the room tokens so that we can send events to clients immediately. To reduce the size of the token we do two things:
1. We create a unique immutable persistent mapping between instance names and a generated small integer ID, which we can encode in the tokens instead of the instance name; and
2. We encode the "persisted upto position" of the room token and then only explicitly include instances that have positions strictly greater than that.
The new tokens look something like: `m3478~1.3488~2.3489`, where the first number is the min position, and the subsequent `-` separated pairs are the instance ID to positions map. (We use `.` and `~` as separators as they're URL safe and not already used by `StreamToken`).
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
Our hacked-up `_exposition.py` was stripping out some samples it shouldn't
have been. Put them back in, to more closely match the upstream
`exposition.py`.
* Don't check whether a 3pid is allowed to register during password reset
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Changelog
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
This endpoint should only deal with emails that have already been approved, and
are attached with user's account. There's no need to re-check them here.
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
I'd like to get a better insight into what we are doing with respect to state
res. The list of state groups we are resolving across should be short (if it
isn't, that's a massive problem in itself), so it should be fine to log it in
ite entiretly.
I've done some grepping and found approximately zero cases in which the
"shortcut" code delivered the result, so I've ripped that out too.
When updating the `room_stats_state` table, we try to check for null bytes slipping in to the content for state events. It turns out we had added `guest_access` as a field to room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a `m.room.guest_access` event then breaks `room_stats_state` updates.
This PR adds the check for `guest_access`.
When updating room_stats_state, we try to check for null bytes slipping
in to the
content for state events. It turns out we had added guest_access as a
field to
room_stats_state without including it in the null byte check.
Lo and behold, a null byte in a m.room.guest_access event then breaks
room_stats_state
updates.
This PR adds the check for guest_access. A further PR will improve this
function so that this hopefully does not happen again in future.
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
-----BEGIN PGP SIGNATURE-----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=tT5/
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc5' into develop
Synapse 1.20.0rc5 (2020-09-18)
==============================
In addition to the below, Synapse 1.20.0rc5 also includes the bug fix that was included in 1.19.3.
Features
--------
- Add flags to the `/versions` endpoint for whether new rooms default to using E2EE. ([\#8343](https://github.com/matrix-org/synapse/issues/8343))
Bugfixes
--------
- Fix rate limiting of federation `/send` requests. ([\#8342](https://github.com/matrix-org/synapse/issues/8342))
- Fix a longstanding bug where back pagination over federation could get stuck if it failed to handle a received event. ([\#8349](https://github.com/matrix-org/synapse/issues/8349))
Internal Changes
----------------
- Blacklist [MSC2753](https://github.com/matrix-org/matrix-doc/pull/2753) SyTests until it is implemented. ([\#8285](https://github.com/matrix-org/synapse/issues/8285))
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
-----BEGIN PGP SIGNATURE-----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=a9VC
-----END PGP SIGNATURE-----
Merge tag 'v1.19.3' into release-v1.20.0
1.19.3
Synapse 1.19.3 (2020-09-18)
===========================
Bugfixes
--------
- Partially mitigate bug where newly joined servers couldn't get past
events in a room when there is a malformed event.
([\#8350](https://github.com/matrix-org/synapse/issues/8350))
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This is a bit of a hack, as `_check_sigs_and_hash_and_fetch` is intended
for attempting to pull an event from the database/(re)pull it from the
server that originally sent the event if checking the signature of the
event fails.
During backfill we *know* that we won't have the event in our database,
however it is still useful to be able to query the original sending
server as the server we're backfilling from may be acting maliciously.
The main benefit and reason for this change however is that
`_check_sigs_and_hash_and_fetch` will drop an event during backfill if
it cannot be successfully validated, whereas the current code will
simply fail the backfill request - resulting in the client's /messages
request silently being dropped.
This is a quick patch to fix backfilling rooms that contain malformed
events. A better implementation in planned in future.
Instead of just using the most recent extremities let's pick the
ones that will give us results that the pagination request cares about,
i.e. pick extremities only if they have a smaller depth than the
pagination token.
This is useful when we fail to backfill an extremity, as we no longer
get stuck requesting that same extremity repeatedly.
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
-----BEGIN PGP SIGNATURE-----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=0feV
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc4' into develop
Synapse 1.20.0rc4 (2020-09-16)
==============================
Synapse 1.20.0rc4 is identical to 1.20.0rc3, with the addition of the security fix that was included in 1.19.2.
slots use less memory (and attribute access is faster) while slightly
limiting the flexibility of the class attributes. This focuses on objects
which are instantiated "often" and for short periods of time.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
-----BEGIN PGP SIGNATURE-----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=e2T1
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc3' into develop
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
The idea here is that we pass the `max_stream_id` to everything, and only use the stream ID of the particular event to figure out *when* the max stream position has caught up to the event and we can notify people about it.
This is to maintain the distinction between the position of an item in the stream (i.e. event A has stream ID 513) and a token that can be used to partition the stream (i.e. give me all events after stream ID 352). This distinction becomes important when the tokens are more complicated than a single number, which they will be once we start tracking the position of multiple writers in the tokens.
The valid operations here are:
1. Is a position before or after a token
2. Fetching all events between two tokens
3. Merging multiple tokens to get the "max", i.e. `C = max(A, B)` means that for all positions P where P is before A *or* before B, then P is before C.
Future PR will change the token type to a dedicated type.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This fixes an issue where different methods (crop/scale) overwrite each other.
This first tries the new path. If that fails and we are looking for a
remote thumbnail, it tries the old path. If that still isn't found, it
continues as normal.
This should probably be removed in the future, after some of the newer
thumbnails were generated with the new path on most deployments. Then
the overhead should be minimal if the other thumbnails need to be
regenerated.
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
The intention here is to change `StreamToken.room_key` to be a `RoomStreamToken` in a future PR, but that is a big enough change without this refactoring too.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This removes `SourcePaginationConfig` and `get_pagination_rows`. The reasoning behind this is that these generic classes/functions erased the types of the IDs it used (i.e. instead of passing around `StreamToken` it'd pass in e.g. `token.room_key`, which don't have uniform types).
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
