mirror of
https://mau.dev/maunium/synapse.git
synced 2024-08-25 03:35:28 +00:00
![Patrick Cloke](/assets/img/avatar_default.png)
Authentication is done by checking a shared secret provided in the Synapse configuration file.
2617 lines
91 KiB
YAML
2617 lines
91 KiB
YAML
# This file is maintained as an up-to-date snapshot of the default
|
|
# homeserver.yaml configuration generated by Synapse.
|
|
#
|
|
# It is intended to act as a reference for the default configuration,
|
|
# helping admins keep track of new options and other changes, and compare
|
|
# their configs with the current default. As such, many of the actual
|
|
# config values shown are placeholders.
|
|
#
|
|
# It is *not* intended to be copied and used as the basis for a real
|
|
# homeserver.yaml. Instead, if you are starting from scratch, please generate
|
|
# a fresh config using Synapse by following the instructions in INSTALL.md.
|
|
|
|
# Configuration options that take a time period can be set using a number
|
|
# followed by a letter. Letters have the following meanings:
|
|
# s = second
|
|
# m = minute
|
|
# h = hour
|
|
# d = day
|
|
# w = week
|
|
# y = year
|
|
# For example, setting redaction_retention_period: 5m would remove redacted
|
|
# messages from the database after 5 minutes, rather than 5 months.
|
|
|
|
################################################################################
|
|
|
|
# Configuration file for Synapse.
|
|
#
|
|
# This is a YAML file: see [1] for a quick introduction. Note in particular
|
|
# that *indentation is important*: all the elements of a list or dictionary
|
|
# should have the same indentation.
|
|
#
|
|
# [1] https://docs.ansible.com/ansible/latest/reference_appendices/YAMLSyntax.html
|
|
|
|
## Server ##
|
|
|
|
# The public-facing domain of the server
|
|
#
|
|
# The server_name name will appear at the end of usernames and room addresses
|
|
# created on this server. For example if the server_name was example.com,
|
|
# usernames on this server would be in the format @user:example.com
|
|
#
|
|
# In most cases you should avoid using a matrix specific subdomain such as
|
|
# matrix.example.com or synapse.example.com as the server_name for the same
|
|
# reasons you wouldn't use user@email.example.com as your email address.
|
|
# See https://github.com/matrix-org/synapse/blob/master/docs/delegate.md
|
|
# for information on how to host Synapse on a subdomain while preserving
|
|
# a clean server_name.
|
|
#
|
|
# The server_name cannot be changed later so it is important to
|
|
# configure this correctly before you start Synapse. It should be all
|
|
# lowercase and may contain an explicit port.
|
|
# Examples: matrix.org, localhost:8080
|
|
#
|
|
server_name: "SERVERNAME"
|
|
|
|
# When running as a daemon, the file to store the pid in
|
|
#
|
|
pid_file: DATADIR/homeserver.pid
|
|
|
|
# The absolute URL to the web client which /_matrix/client will redirect
|
|
# to if 'webclient' is configured under the 'listeners' configuration.
|
|
#
|
|
# This option can be also set to the filesystem path to the web client
|
|
# which will be served at /_matrix/client/ if 'webclient' is configured
|
|
# under the 'listeners' configuration, however this is a security risk:
|
|
# https://github.com/matrix-org/synapse#security-note
|
|
#
|
|
#web_client_location: https://riot.example.com/
|
|
|
|
# The public-facing base URL that clients use to access this HS
|
|
# (not including _matrix/...). This is the same URL a user would
|
|
# enter into the 'custom HS URL' field on their client. If you
|
|
# use synapse with a reverse proxy, this should be the URL to reach
|
|
# synapse via the proxy.
|
|
#
|
|
#public_baseurl: https://example.com/
|
|
|
|
# Set the soft limit on the number of file descriptors synapse can use
|
|
# Zero is used to indicate synapse should set the soft limit to the
|
|
# hard limit.
|
|
#
|
|
#soft_file_limit: 0
|
|
|
|
# Set to false to disable presence tracking on this homeserver.
|
|
#
|
|
#use_presence: false
|
|
|
|
# Whether to require authentication to retrieve profile data (avatars,
|
|
# display names) of other users through the client API. Defaults to
|
|
# 'false'. Note that profile data is also available via the federation
|
|
# API, so this setting is of limited value if federation is enabled on
|
|
# the server.
|
|
#
|
|
#require_auth_for_profile_requests: true
|
|
|
|
# Uncomment to require a user to share a room with another user in order
|
|
# to retrieve their profile information. Only checked on Client-Server
|
|
# requests. Profile requests from other servers should be checked by the
|
|
# requesting server. Defaults to 'false'.
|
|
#
|
|
#limit_profile_requests_to_users_who_share_rooms: true
|
|
|
|
# If set to 'true', removes the need for authentication to access the server's
|
|
# public rooms directory through the client API, meaning that anyone can
|
|
# query the room directory. Defaults to 'false'.
|
|
#
|
|
#allow_public_rooms_without_auth: true
|
|
|
|
# If set to 'true', allows any other homeserver to fetch the server's public
|
|
# rooms directory via federation. Defaults to 'false'.
|
|
#
|
|
#allow_public_rooms_over_federation: true
|
|
|
|
# The default room version for newly created rooms.
|
|
#
|
|
# Known room versions are listed here:
|
|
# https://matrix.org/docs/spec/#complete-list-of-room-versions
|
|
#
|
|
# For example, for room version 1, default_room_version should be set
|
|
# to "1".
|
|
#
|
|
#default_room_version: "6"
|
|
|
|
# The GC threshold parameters to pass to `gc.set_threshold`, if defined
|
|
#
|
|
#gc_thresholds: [700, 10, 10]
|
|
|
|
# Set the limit on the returned events in the timeline in the get
|
|
# and sync operations. The default value is 100. -1 means no upper limit.
|
|
#
|
|
# Uncomment the following to increase the limit to 5000.
|
|
#
|
|
#filter_timeline_limit: 5000
|
|
|
|
# Whether room invites to users on this server should be blocked
|
|
# (except those sent by local server admins). The default is False.
|
|
#
|
|
#block_non_admin_invites: true
|
|
|
|
# Room searching
|
|
#
|
|
# If disabled, new messages will not be indexed for searching and users
|
|
# will receive errors when searching for messages. Defaults to enabled.
|
|
#
|
|
#enable_search: false
|
|
|
|
# List of ports that Synapse should listen on, their purpose and their
|
|
# configuration.
|
|
#
|
|
# Options for each listener include:
|
|
#
|
|
# port: the TCP port to bind to
|
|
#
|
|
# bind_addresses: a list of local addresses to listen on. The default is
|
|
# 'all local interfaces'.
|
|
#
|
|
# type: the type of listener. Normally 'http', but other valid options are:
|
|
# 'manhole' (see docs/manhole.md),
|
|
# 'metrics' (see docs/metrics-howto.md),
|
|
# 'replication' (see docs/workers.md).
|
|
#
|
|
# tls: set to true to enable TLS for this listener. Will use the TLS
|
|
# key/cert specified in tls_private_key_path / tls_certificate_path.
|
|
#
|
|
# x_forwarded: Only valid for an 'http' listener. Set to true to use the
|
|
# X-Forwarded-For header as the client IP. Useful when Synapse is
|
|
# behind a reverse-proxy.
|
|
#
|
|
# resources: Only valid for an 'http' listener. A list of resources to host
|
|
# on this port. Options for each resource are:
|
|
#
|
|
# names: a list of names of HTTP resources. See below for a list of
|
|
# valid resource names.
|
|
#
|
|
# compress: set to true to enable HTTP compression for this resource.
|
|
#
|
|
# additional_resources: Only valid for an 'http' listener. A map of
|
|
# additional endpoints which should be loaded via dynamic modules.
|
|
#
|
|
# Valid resource names are:
|
|
#
|
|
# client: the client-server API (/_matrix/client), and the synapse admin
|
|
# API (/_synapse/admin). Also implies 'media' and 'static'.
|
|
#
|
|
# consent: user consent forms (/_matrix/consent). See
|
|
# docs/consent_tracking.md.
|
|
#
|
|
# federation: the server-server API (/_matrix/federation). Also implies
|
|
# 'media', 'keys', 'openid'
|
|
#
|
|
# keys: the key discovery API (/_matrix/keys).
|
|
#
|
|
# media: the media API (/_matrix/media).
|
|
#
|
|
# metrics: the metrics interface. See docs/metrics-howto.md.
|
|
#
|
|
# openid: OpenID authentication.
|
|
#
|
|
# replication: the HTTP replication API (/_synapse/replication). See
|
|
# docs/workers.md.
|
|
#
|
|
# static: static resources under synapse/static (/_matrix/static). (Mostly
|
|
# useful for 'fallback authentication'.)
|
|
#
|
|
# webclient: A web client. Requires web_client_location to be set.
|
|
#
|
|
listeners:
|
|
# TLS-enabled listener: for when matrix traffic is sent directly to synapse.
|
|
#
|
|
# Disabled by default. To enable it, uncomment the following. (Note that you
|
|
# will also need to give Synapse a TLS key and certificate: see the TLS section
|
|
# below.)
|
|
#
|
|
#- port: 8448
|
|
# type: http
|
|
# tls: true
|
|
# resources:
|
|
# - names: [client, federation]
|
|
|
|
# Unsecure HTTP listener: for when matrix traffic passes through a reverse proxy
|
|
# that unwraps TLS.
|
|
#
|
|
# If you plan to use a reverse proxy, please see
|
|
# https://github.com/matrix-org/synapse/blob/master/docs/reverse_proxy.md.
|
|
#
|
|
- port: 8008
|
|
tls: false
|
|
type: http
|
|
x_forwarded: true
|
|
bind_addresses: ['::1', '127.0.0.1']
|
|
|
|
resources:
|
|
- names: [client, federation]
|
|
compress: false
|
|
|
|
# example additional_resources:
|
|
#
|
|
#additional_resources:
|
|
# "/_matrix/my/custom/endpoint":
|
|
# module: my_module.CustomRequestHandler
|
|
# config: {}
|
|
|
|
# Turn on the twisted ssh manhole service on localhost on the given
|
|
# port.
|
|
#
|
|
#- port: 9000
|
|
# bind_addresses: ['::1', '127.0.0.1']
|
|
# type: manhole
|
|
|
|
# Forward extremities can build up in a room due to networking delays between
|
|
# homeservers. Once this happens in a large room, calculation of the state of
|
|
# that room can become quite expensive. To mitigate this, once the number of
|
|
# forward extremities reaches a given threshold, Synapse will send an
|
|
# org.matrix.dummy_event event, which will reduce the forward extremities
|
|
# in the room.
|
|
#
|
|
# This setting defines the threshold (i.e. number of forward extremities in the
|
|
# room) at which dummy events are sent. The default value is 10.
|
|
#
|
|
#dummy_events_threshold: 5
|
|
|
|
|
|
## Homeserver blocking ##
|
|
|
|
# How to reach the server admin, used in ResourceLimitError
|
|
#
|
|
#admin_contact: 'mailto:admin@server.com'
|
|
|
|
# Global blocking
|
|
#
|
|
#hs_disabled: false
|
|
#hs_disabled_message: 'Human readable reason for why the HS is blocked'
|
|
|
|
# Monthly Active User Blocking
|
|
#
|
|
# Used in cases where the admin or server owner wants to limit to the
|
|
# number of monthly active users.
|
|
#
|
|
# 'limit_usage_by_mau' disables/enables monthly active user blocking. When
|
|
# enabled and a limit is reached the server returns a 'ResourceLimitError'
|
|
# with error type Codes.RESOURCE_LIMIT_EXCEEDED
|
|
#
|
|
# 'max_mau_value' is the hard limit of monthly active users above which
|
|
# the server will start blocking user actions.
|
|
#
|
|
# 'mau_trial_days' is a means to add a grace period for active users. It
|
|
# means that users must be active for this number of days before they
|
|
# can be considered active and guards against the case where lots of users
|
|
# sign up in a short space of time never to return after their initial
|
|
# session.
|
|
#
|
|
# 'mau_limit_alerting' is a means of limiting client side alerting
|
|
# should the mau limit be reached. This is useful for small instances
|
|
# where the admin has 5 mau seats (say) for 5 specific people and no
|
|
# interest increasing the mau limit further. Defaults to True, which
|
|
# means that alerting is enabled
|
|
#
|
|
#limit_usage_by_mau: false
|
|
#max_mau_value: 50
|
|
#mau_trial_days: 2
|
|
#mau_limit_alerting: false
|
|
|
|
# If enabled, the metrics for the number of monthly active users will
|
|
# be populated, however no one will be limited. If limit_usage_by_mau
|
|
# is true, this is implied to be true.
|
|
#
|
|
#mau_stats_only: false
|
|
|
|
# Sometimes the server admin will want to ensure certain accounts are
|
|
# never blocked by mau checking. These accounts are specified here.
|
|
#
|
|
#mau_limit_reserved_threepids:
|
|
# - medium: 'email'
|
|
# address: 'reserved_user@example.com'
|
|
|
|
# Used by phonehome stats to group together related servers.
|
|
#server_context: context
|
|
|
|
# Resource-constrained homeserver settings
|
|
#
|
|
# When this is enabled, the room "complexity" will be checked before a user
|
|
# joins a new remote room. If it is above the complexity limit, the server will
|
|
# disallow joining, or will instantly leave.
|
|
#
|
|
# Room complexity is an arbitrary measure based on factors such as the number of
|
|
# users in the room.
|
|
#
|
|
limit_remote_rooms:
|
|
# Uncomment to enable room complexity checking.
|
|
#
|
|
#enabled: true
|
|
|
|
# the limit above which rooms cannot be joined. The default is 1.0.
|
|
#
|
|
#complexity: 0.5
|
|
|
|
# override the error which is returned when the room is too complex.
|
|
#
|
|
#complexity_error: "This room is too complex."
|
|
|
|
# allow server admins to join complex rooms. Default is false.
|
|
#
|
|
#admins_can_join: true
|
|
|
|
# Whether to require a user to be in the room to add an alias to it.
|
|
# Defaults to 'true'.
|
|
#
|
|
#require_membership_for_aliases: false
|
|
|
|
# Whether to allow per-room membership profiles through the send of membership
|
|
# events with profile information that differ from the target's global profile.
|
|
# Defaults to 'true'.
|
|
#
|
|
#allow_per_room_profiles: false
|
|
|
|
# How long to keep redacted events in unredacted form in the database. After
|
|
# this period redacted events get replaced with their redacted form in the DB.
|
|
#
|
|
# Defaults to `7d`. Set to `null` to disable.
|
|
#
|
|
#redaction_retention_period: 28d
|
|
|
|
# How long to track users' last seen time and IPs in the database.
|
|
#
|
|
# Defaults to `28d`. Set to `null` to disable clearing out of old rows.
|
|
#
|
|
#user_ips_max_age: 14d
|
|
|
|
# Message retention policy at the server level.
|
|
#
|
|
# Room admins and mods can define a retention period for their rooms using the
|
|
# 'm.room.retention' state event, and server admins can cap this period by setting
|
|
# the 'allowed_lifetime_min' and 'allowed_lifetime_max' config options.
|
|
#
|
|
# If this feature is enabled, Synapse will regularly look for and purge events
|
|
# which are older than the room's maximum retention period. Synapse will also
|
|
# filter events received over federation so that events that should have been
|
|
# purged are ignored and not stored again.
|
|
#
|
|
retention:
|
|
# The message retention policies feature is disabled by default. Uncomment the
|
|
# following line to enable it.
|
|
#
|
|
#enabled: true
|
|
|
|
# Default retention policy. If set, Synapse will apply it to rooms that lack the
|
|
# 'm.room.retention' state event. Currently, the value of 'min_lifetime' doesn't
|
|
# matter much because Synapse doesn't take it into account yet.
|
|
#
|
|
#default_policy:
|
|
# min_lifetime: 1d
|
|
# max_lifetime: 1y
|
|
|
|
# Retention policy limits. If set, and the state of a room contains a
|
|
# 'm.room.retention' event in its state which contains a 'min_lifetime' or a
|
|
# 'max_lifetime' that's out of these bounds, Synapse will cap the room's policy
|
|
# to these limits when running purge jobs.
|
|
#
|
|
#allowed_lifetime_min: 1d
|
|
#allowed_lifetime_max: 1y
|
|
|
|
# Server admins can define the settings of the background jobs purging the
|
|
# events which lifetime has expired under the 'purge_jobs' section.
|
|
#
|
|
# If no configuration is provided, a single job will be set up to delete expired
|
|
# events in every room daily.
|
|
#
|
|
# Each job's configuration defines which range of message lifetimes the job
|
|
# takes care of. For example, if 'shortest_max_lifetime' is '2d' and
|
|
# 'longest_max_lifetime' is '3d', the job will handle purging expired events in
|
|
# rooms whose state defines a 'max_lifetime' that's both higher than 2 days, and
|
|
# lower than or equal to 3 days. Both the minimum and the maximum value of a
|
|
# range are optional, e.g. a job with no 'shortest_max_lifetime' and a
|
|
# 'longest_max_lifetime' of '3d' will handle every room with a retention policy
|
|
# which 'max_lifetime' is lower than or equal to three days.
|
|
#
|
|
# The rationale for this per-job configuration is that some rooms might have a
|
|
# retention policy with a low 'max_lifetime', where history needs to be purged
|
|
# of outdated messages on a more frequent basis than for the rest of the rooms
|
|
# (e.g. every 12h), but not want that purge to be performed by a job that's
|
|
# iterating over every room it knows, which could be heavy on the server.
|
|
#
|
|
# If any purge job is configured, it is strongly recommended to have at least
|
|
# a single job with neither 'shortest_max_lifetime' nor 'longest_max_lifetime'
|
|
# set, or one job without 'shortest_max_lifetime' and one job without
|
|
# 'longest_max_lifetime' set. Otherwise some rooms might be ignored, even if
|
|
# 'allowed_lifetime_min' and 'allowed_lifetime_max' are set, because capping a
|
|
# room's policy to these values is done after the policies are retrieved from
|
|
# Synapse's database (which is done using the range specified in a purge job's
|
|
# configuration).
|
|
#
|
|
#purge_jobs:
|
|
# - longest_max_lifetime: 3d
|
|
# interval: 12h
|
|
# - shortest_max_lifetime: 3d
|
|
# interval: 1d
|
|
|
|
# Inhibits the /requestToken endpoints from returning an error that might leak
|
|
# information about whether an e-mail address is in use or not on this
|
|
# homeserver.
|
|
# Note that for some endpoints the error situation is the e-mail already being
|
|
# used, and for others the error is entering the e-mail being unused.
|
|
# If this option is enabled, instead of returning an error, these endpoints will
|
|
# act as if no error happened and return a fake session ID ('sid') to clients.
|
|
#
|
|
#request_token_inhibit_3pid_errors: true
|
|
|
|
# A list of domains that the domain portion of 'next_link' parameters
|
|
# must match.
|
|
#
|
|
# This parameter is optionally provided by clients while requesting
|
|
# validation of an email or phone number, and maps to a link that
|
|
# users will be automatically redirected to after validation
|
|
# succeeds. Clients can make use this parameter to aid the validation
|
|
# process.
|
|
#
|
|
# The whitelist is applied whether the homeserver or an
|
|
# identity server is handling validation.
|
|
#
|
|
# The default value is no whitelist functionality; all domains are
|
|
# allowed. Setting this value to an empty list will instead disallow
|
|
# all domains.
|
|
#
|
|
#next_link_domain_whitelist: ["matrix.org"]
|
|
|
|
|
|
## TLS ##
|
|
|
|
# PEM-encoded X509 certificate for TLS.
|
|
# This certificate, as of Synapse 1.0, will need to be a valid and verifiable
|
|
# certificate, signed by a recognised Certificate Authority.
|
|
#
|
|
# See 'ACME support' below to enable auto-provisioning this certificate via
|
|
# Let's Encrypt.
|
|
#
|
|
# If supplying your own, be sure to use a `.pem` file that includes the
|
|
# full certificate chain including any intermediate certificates (for
|
|
# instance, if using certbot, use `fullchain.pem` as your certificate,
|
|
# not `cert.pem`).
|
|
#
|
|
#tls_certificate_path: "CONFDIR/SERVERNAME.tls.crt"
|
|
|
|
# PEM-encoded private key for TLS
|
|
#
|
|
#tls_private_key_path: "CONFDIR/SERVERNAME.tls.key"
|
|
|
|
# Whether to verify TLS server certificates for outbound federation requests.
|
|
#
|
|
# Defaults to `true`. To disable certificate verification, uncomment the
|
|
# following line.
|
|
#
|
|
#federation_verify_certificates: false
|
|
|
|
# The minimum TLS version that will be used for outbound federation requests.
|
|
#
|
|
# Defaults to `1`. Configurable to `1`, `1.1`, `1.2`, or `1.3`. Note
|
|
# that setting this value higher than `1.2` will prevent federation to most
|
|
# of the public Matrix network: only configure it to `1.3` if you have an
|
|
# entirely private federation setup and you can ensure TLS 1.3 support.
|
|
#
|
|
#federation_client_minimum_tls_version: 1.2
|
|
|
|
# Skip federation certificate verification on the following whitelist
|
|
# of domains.
|
|
#
|
|
# This setting should only be used in very specific cases, such as
|
|
# federation over Tor hidden services and similar. For private networks
|
|
# of homeservers, you likely want to use a private CA instead.
|
|
#
|
|
# Only effective if federation_verify_certicates is `true`.
|
|
#
|
|
#federation_certificate_verification_whitelist:
|
|
# - lon.example.com
|
|
# - *.domain.com
|
|
# - *.onion
|
|
|
|
# List of custom certificate authorities for federation traffic.
|
|
#
|
|
# This setting should only normally be used within a private network of
|
|
# homeservers.
|
|
#
|
|
# Note that this list will replace those that are provided by your
|
|
# operating environment. Certificates must be in PEM format.
|
|
#
|
|
#federation_custom_ca_list:
|
|
# - myCA1.pem
|
|
# - myCA2.pem
|
|
# - myCA3.pem
|
|
|
|
# ACME support: This will configure Synapse to request a valid TLS certificate
|
|
# for your configured `server_name` via Let's Encrypt.
|
|
#
|
|
# Note that ACME v1 is now deprecated, and Synapse currently doesn't support
|
|
# ACME v2. This means that this feature currently won't work with installs set
|
|
# up after November 2019. For more info, and alternative solutions, see
|
|
# https://github.com/matrix-org/synapse/blob/master/docs/ACME.md#deprecation-of-acme-v1
|
|
#
|
|
# Note that provisioning a certificate in this way requires port 80 to be
|
|
# routed to Synapse so that it can complete the http-01 ACME challenge.
|
|
# By default, if you enable ACME support, Synapse will attempt to listen on
|
|
# port 80 for incoming http-01 challenges - however, this will likely fail
|
|
# with 'Permission denied' or a similar error.
|
|
#
|
|
# There are a couple of potential solutions to this:
|
|
#
|
|
# * If you already have an Apache, Nginx, or similar listening on port 80,
|
|
# you can configure Synapse to use an alternate port, and have your web
|
|
# server forward the requests. For example, assuming you set 'port: 8009'
|
|
# below, on Apache, you would write:
|
|
#
|
|
# ProxyPass /.well-known/acme-challenge http://localhost:8009/.well-known/acme-challenge
|
|
#
|
|
# * Alternatively, you can use something like `authbind` to give Synapse
|
|
# permission to listen on port 80.
|
|
#
|
|
acme:
|
|
# ACME support is disabled by default. Set this to `true` and uncomment
|
|
# tls_certificate_path and tls_private_key_path above to enable it.
|
|
#
|
|
enabled: false
|
|
|
|
# Endpoint to use to request certificates. If you only want to test,
|
|
# use Let's Encrypt's staging url:
|
|
# https://acme-staging.api.letsencrypt.org/directory
|
|
#
|
|
#url: https://acme-v01.api.letsencrypt.org/directory
|
|
|
|
# Port number to listen on for the HTTP-01 challenge. Change this if
|
|
# you are forwarding connections through Apache/Nginx/etc.
|
|
#
|
|
port: 80
|
|
|
|
# Local addresses to listen on for incoming connections.
|
|
# Again, you may want to change this if you are forwarding connections
|
|
# through Apache/Nginx/etc.
|
|
#
|
|
bind_addresses: ['::', '0.0.0.0']
|
|
|
|
# How many days remaining on a certificate before it is renewed.
|
|
#
|
|
reprovision_threshold: 30
|
|
|
|
# The domain that the certificate should be for. Normally this
|
|
# should be the same as your Matrix domain (i.e., 'server_name'), but,
|
|
# by putting a file at 'https://<server_name>/.well-known/matrix/server',
|
|
# you can delegate incoming traffic to another server. If you do that,
|
|
# you should give the target of the delegation here.
|
|
#
|
|
# For example: if your 'server_name' is 'example.com', but
|
|
# 'https://example.com/.well-known/matrix/server' delegates to
|
|
# 'matrix.example.com', you should put 'matrix.example.com' here.
|
|
#
|
|
# If not set, defaults to your 'server_name'.
|
|
#
|
|
domain: matrix.example.com
|
|
|
|
# file to use for the account key. This will be generated if it doesn't
|
|
# exist.
|
|
#
|
|
# If unspecified, we will use CONFDIR/client.key.
|
|
#
|
|
account_key_file: DATADIR/acme_account.key
|
|
|
|
# List of allowed TLS fingerprints for this server to publish along
|
|
# with the signing keys for this server. Other matrix servers that
|
|
# make HTTPS requests to this server will check that the TLS
|
|
# certificates returned by this server match one of the fingerprints.
|
|
#
|
|
# Synapse automatically adds the fingerprint of its own certificate
|
|
# to the list. So if federation traffic is handled directly by synapse
|
|
# then no modification to the list is required.
|
|
#
|
|
# If synapse is run behind a load balancer that handles the TLS then it
|
|
# will be necessary to add the fingerprints of the certificates used by
|
|
# the loadbalancers to this list if they are different to the one
|
|
# synapse is using.
|
|
#
|
|
# Homeservers are permitted to cache the list of TLS fingerprints
|
|
# returned in the key responses up to the "valid_until_ts" returned in
|
|
# key. It may be necessary to publish the fingerprints of a new
|
|
# certificate and wait until the "valid_until_ts" of the previous key
|
|
# responses have passed before deploying it.
|
|
#
|
|
# You can calculate a fingerprint from a given TLS listener via:
|
|
# openssl s_client -connect $host:$port < /dev/null 2> /dev/null |
|
|
# openssl x509 -outform DER | openssl sha256 -binary | base64 | tr -d '='
|
|
# or by checking matrix.org/federationtester/api/report?server_name=$host
|
|
#
|
|
#tls_fingerprints: [{"sha256": "<base64_encoded_sha256_fingerprint>"}]
|
|
|
|
|
|
## Federation ##
|
|
|
|
# Restrict federation to the following whitelist of domains.
|
|
# N.B. we recommend also firewalling your federation listener to limit
|
|
# inbound federation traffic as early as possible, rather than relying
|
|
# purely on this application-layer restriction. If not specified, the
|
|
# default is to whitelist everything.
|
|
#
|
|
#federation_domain_whitelist:
|
|
# - lon.example.com
|
|
# - nyc.example.com
|
|
# - syd.example.com
|
|
|
|
# Prevent outgoing requests from being sent to the following blacklisted IP address
|
|
# CIDR ranges. If this option is not specified, or specified with an empty list,
|
|
# no IP range blacklist will be enforced.
|
|
#
|
|
# The blacklist applies to the outbound requests for federation, identity servers,
|
|
# push servers, and for checking key validitity for third-party invite events.
|
|
#
|
|
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
|
|
# listed here, since they correspond to unroutable addresses.)
|
|
#
|
|
# This option replaces federation_ip_range_blacklist in Synapse v1.24.0.
|
|
#
|
|
ip_range_blacklist:
|
|
- '127.0.0.0/8'
|
|
- '10.0.0.0/8'
|
|
- '172.16.0.0/12'
|
|
- '192.168.0.0/16'
|
|
- '100.64.0.0/10'
|
|
- '169.254.0.0/16'
|
|
- '::1/128'
|
|
- 'fe80::/64'
|
|
- 'fc00::/7'
|
|
|
|
# Report prometheus metrics on the age of PDUs being sent to and received from
|
|
# the following domains. This can be used to give an idea of "delay" on inbound
|
|
# and outbound federation, though be aware that any delay can be due to problems
|
|
# at either end or with the intermediate network.
|
|
#
|
|
# By default, no domains are monitored in this way.
|
|
#
|
|
#federation_metrics_domains:
|
|
# - matrix.org
|
|
# - example.com
|
|
|
|
|
|
## Caching ##
|
|
|
|
# Caching can be configured through the following options.
|
|
#
|
|
# A cache 'factor' is a multiplier that can be applied to each of
|
|
# Synapse's caches in order to increase or decrease the maximum
|
|
# number of entries that can be stored.
|
|
|
|
# The number of events to cache in memory. Not affected by
|
|
# caches.global_factor.
|
|
#
|
|
#event_cache_size: 10K
|
|
|
|
caches:
|
|
# Controls the global cache factor, which is the default cache factor
|
|
# for all caches if a specific factor for that cache is not otherwise
|
|
# set.
|
|
#
|
|
# This can also be set by the "SYNAPSE_CACHE_FACTOR" environment
|
|
# variable. Setting by environment variable takes priority over
|
|
# setting through the config file.
|
|
#
|
|
# Defaults to 0.5, which will half the size of all caches.
|
|
#
|
|
#global_factor: 1.0
|
|
|
|
# A dictionary of cache name to cache factor for that individual
|
|
# cache. Overrides the global cache factor for a given cache.
|
|
#
|
|
# These can also be set through environment variables comprised
|
|
# of "SYNAPSE_CACHE_FACTOR_" + the name of the cache in capital
|
|
# letters and underscores. Setting by environment variable
|
|
# takes priority over setting through the config file.
|
|
# Ex. SYNAPSE_CACHE_FACTOR_GET_USERS_WHO_SHARE_ROOM_WITH_USER=2.0
|
|
#
|
|
# Some caches have '*' and other characters that are not
|
|
# alphanumeric or underscores. These caches can be named with or
|
|
# without the special characters stripped. For example, to specify
|
|
# the cache factor for `*stateGroupCache*` via an environment
|
|
# variable would be `SYNAPSE_CACHE_FACTOR_STATEGROUPCACHE=2.0`.
|
|
#
|
|
per_cache_factors:
|
|
#get_users_who_share_room_with_user: 2.0
|
|
|
|
|
|
## Database ##
|
|
|
|
# The 'database' setting defines the database that synapse uses to store all of
|
|
# its data.
|
|
#
|
|
# 'name' gives the database engine to use: either 'sqlite3' (for SQLite) or
|
|
# 'psycopg2' (for PostgreSQL).
|
|
#
|
|
# 'args' gives options which are passed through to the database engine,
|
|
# except for options starting 'cp_', which are used to configure the Twisted
|
|
# connection pool. For a reference to valid arguments, see:
|
|
# * for sqlite: https://docs.python.org/3/library/sqlite3.html#sqlite3.connect
|
|
# * for postgres: https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS
|
|
# * for the connection pool: https://twistedmatrix.com/documents/current/api/twisted.enterprise.adbapi.ConnectionPool.html#__init__
|
|
#
|
|
#
|
|
# Example SQLite configuration:
|
|
#
|
|
#database:
|
|
# name: sqlite3
|
|
# args:
|
|
# database: /path/to/homeserver.db
|
|
#
|
|
#
|
|
# Example Postgres configuration:
|
|
#
|
|
#database:
|
|
# name: psycopg2
|
|
# args:
|
|
# user: synapse_user
|
|
# password: secretpassword
|
|
# database: synapse
|
|
# host: localhost
|
|
# cp_min: 5
|
|
# cp_max: 10
|
|
#
|
|
# For more information on using Synapse with Postgres, see `docs/postgres.md`.
|
|
#
|
|
database:
|
|
name: sqlite3
|
|
args:
|
|
database: DATADIR/homeserver.db
|
|
|
|
|
|
## Logging ##
|
|
|
|
# A yaml python logging config file as described by
|
|
# https://docs.python.org/3.7/library/logging.config.html#configuration-dictionary-schema
|
|
#
|
|
log_config: "CONFDIR/SERVERNAME.log.config"
|
|
|
|
|
|
## Ratelimiting ##
|
|
|
|
# Ratelimiting settings for client actions (registration, login, messaging).
|
|
#
|
|
# Each ratelimiting configuration is made of two parameters:
|
|
# - per_second: number of requests a client can send per second.
|
|
# - burst_count: number of requests a client can send before being throttled.
|
|
#
|
|
# Synapse currently uses the following configurations:
|
|
# - one for messages that ratelimits sending based on the account the client
|
|
# is using
|
|
# - one for registration that ratelimits registration requests based on the
|
|
# client's IP address.
|
|
# - one for login that ratelimits login requests based on the client's IP
|
|
# address.
|
|
# - one for login that ratelimits login requests based on the account the
|
|
# client is attempting to log into.
|
|
# - one for login that ratelimits login requests based on the account the
|
|
# client is attempting to log into, based on the amount of failed login
|
|
# attempts for this account.
|
|
# - one for ratelimiting redactions by room admins. If this is not explicitly
|
|
# set then it uses the same ratelimiting as per rc_message. This is useful
|
|
# to allow room admins to deal with abuse quickly.
|
|
# - two for ratelimiting number of rooms a user can join, "local" for when
|
|
# users are joining rooms the server is already in (this is cheap) vs
|
|
# "remote" for when users are trying to join rooms not on the server (which
|
|
# can be more expensive)
|
|
#
|
|
# The defaults are as shown below.
|
|
#
|
|
#rc_message:
|
|
# per_second: 0.2
|
|
# burst_count: 10
|
|
#
|
|
#rc_registration:
|
|
# per_second: 0.17
|
|
# burst_count: 3
|
|
#
|
|
#rc_login:
|
|
# address:
|
|
# per_second: 0.17
|
|
# burst_count: 3
|
|
# account:
|
|
# per_second: 0.17
|
|
# burst_count: 3
|
|
# failed_attempts:
|
|
# per_second: 0.17
|
|
# burst_count: 3
|
|
#
|
|
#rc_admin_redaction:
|
|
# per_second: 1
|
|
# burst_count: 50
|
|
#
|
|
#rc_joins:
|
|
# local:
|
|
# per_second: 0.1
|
|
# burst_count: 3
|
|
# remote:
|
|
# per_second: 0.01
|
|
# burst_count: 3
|
|
|
|
|
|
# Ratelimiting settings for incoming federation
|
|
#
|
|
# The rc_federation configuration is made up of the following settings:
|
|
# - window_size: window size in milliseconds
|
|
# - sleep_limit: number of federation requests from a single server in
|
|
# a window before the server will delay processing the request.
|
|
# - sleep_delay: duration in milliseconds to delay processing events
|
|
# from remote servers by if they go over the sleep limit.
|
|
# - reject_limit: maximum number of concurrent federation requests
|
|
# allowed from a single server
|
|
# - concurrent: number of federation requests to concurrently process
|
|
# from a single server
|
|
#
|
|
# The defaults are as shown below.
|
|
#
|
|
#rc_federation:
|
|
# window_size: 1000
|
|
# sleep_limit: 10
|
|
# sleep_delay: 500
|
|
# reject_limit: 50
|
|
# concurrent: 3
|
|
|
|
# Target outgoing federation transaction frequency for sending read-receipts,
|
|
# per-room.
|
|
#
|
|
# If we end up trying to send out more read-receipts, they will get buffered up
|
|
# into fewer transactions.
|
|
#
|
|
#federation_rr_transactions_per_room_per_second: 50
|
|
|
|
|
|
|
|
## Media Store ##
|
|
|
|
# Enable the media store service in the Synapse master. Uncomment the
|
|
# following if you are using a separate media store worker.
|
|
#
|
|
#enable_media_repo: false
|
|
|
|
# Directory where uploaded images and attachments are stored.
|
|
#
|
|
media_store_path: "DATADIR/media_store"
|
|
|
|
# Media storage providers allow media to be stored in different
|
|
# locations.
|
|
#
|
|
#media_storage_providers:
|
|
# - module: file_system
|
|
# # Whether to store newly uploaded local files
|
|
# store_local: false
|
|
# # Whether to store newly downloaded remote files
|
|
# store_remote: false
|
|
# # Whether to wait for successful storage for local uploads
|
|
# store_synchronous: false
|
|
# config:
|
|
# directory: /mnt/some/other/directory
|
|
|
|
# The largest allowed upload size in bytes
|
|
#
|
|
#max_upload_size: 50M
|
|
|
|
# Maximum number of pixels that will be thumbnailed
|
|
#
|
|
#max_image_pixels: 32M
|
|
|
|
# Whether to generate new thumbnails on the fly to precisely match
|
|
# the resolution requested by the client. If true then whenever
|
|
# a new resolution is requested by the client the server will
|
|
# generate a new thumbnail. If false the server will pick a thumbnail
|
|
# from a precalculated list.
|
|
#
|
|
#dynamic_thumbnails: false
|
|
|
|
# List of thumbnails to precalculate when an image is uploaded.
|
|
#
|
|
#thumbnail_sizes:
|
|
# - width: 32
|
|
# height: 32
|
|
# method: crop
|
|
# - width: 96
|
|
# height: 96
|
|
# method: crop
|
|
# - width: 320
|
|
# height: 240
|
|
# method: scale
|
|
# - width: 640
|
|
# height: 480
|
|
# method: scale
|
|
# - width: 800
|
|
# height: 600
|
|
# method: scale
|
|
|
|
# Is the preview URL API enabled?
|
|
#
|
|
# 'false' by default: uncomment the following to enable it (and specify a
|
|
# url_preview_ip_range_blacklist blacklist).
|
|
#
|
|
#url_preview_enabled: true
|
|
|
|
# List of IP address CIDR ranges that the URL preview spider is denied
|
|
# from accessing. There are no defaults: you must explicitly
|
|
# specify a list for URL previewing to work. You should specify any
|
|
# internal services in your network that you do not want synapse to try
|
|
# to connect to, otherwise anyone in any Matrix room could cause your
|
|
# synapse to issue arbitrary GET requests to your internal services,
|
|
# causing serious security issues.
|
|
#
|
|
# (0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
|
|
# listed here, since they correspond to unroutable addresses.)
|
|
#
|
|
# This must be specified if url_preview_enabled is set. It is recommended that
|
|
# you uncomment the following list as a starting point.
|
|
#
|
|
#url_preview_ip_range_blacklist:
|
|
# - '127.0.0.0/8'
|
|
# - '10.0.0.0/8'
|
|
# - '172.16.0.0/12'
|
|
# - '192.168.0.0/16'
|
|
# - '100.64.0.0/10'
|
|
# - '169.254.0.0/16'
|
|
# - '::1/128'
|
|
# - 'fe80::/64'
|
|
# - 'fc00::/7'
|
|
|
|
# List of IP address CIDR ranges that the URL preview spider is allowed
|
|
# to access even if they are specified in url_preview_ip_range_blacklist.
|
|
# This is useful for specifying exceptions to wide-ranging blacklisted
|
|
# target IP ranges - e.g. for enabling URL previews for a specific private
|
|
# website only visible in your network.
|
|
#
|
|
#url_preview_ip_range_whitelist:
|
|
# - '192.168.1.1'
|
|
|
|
# Optional list of URL matches that the URL preview spider is
|
|
# denied from accessing. You should use url_preview_ip_range_blacklist
|
|
# in preference to this, otherwise someone could define a public DNS
|
|
# entry that points to a private IP address and circumvent the blacklist.
|
|
# This is more useful if you know there is an entire shape of URL that
|
|
# you know that will never want synapse to try to spider.
|
|
#
|
|
# Each list entry is a dictionary of url component attributes as returned
|
|
# by urlparse.urlsplit as applied to the absolute form of the URL. See
|
|
# https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit
|
|
# The values of the dictionary are treated as an filename match pattern
|
|
# applied to that component of URLs, unless they start with a ^ in which
|
|
# case they are treated as a regular expression match. If all the
|
|
# specified component matches for a given list item succeed, the URL is
|
|
# blacklisted.
|
|
#
|
|
#url_preview_url_blacklist:
|
|
# # blacklist any URL with a username in its URI
|
|
# - username: '*'
|
|
#
|
|
# # blacklist all *.google.com URLs
|
|
# - netloc: 'google.com'
|
|
# - netloc: '*.google.com'
|
|
#
|
|
# # blacklist all plain HTTP URLs
|
|
# - scheme: 'http'
|
|
#
|
|
# # blacklist http(s)://www.acme.com/foo
|
|
# - netloc: 'www.acme.com'
|
|
# path: '/foo'
|
|
#
|
|
# # blacklist any URL with a literal IPv4 address
|
|
# - netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'
|
|
|
|
# The largest allowed URL preview spidering size in bytes
|
|
#
|
|
#max_spider_size: 10M
|
|
|
|
# A list of values for the Accept-Language HTTP header used when
|
|
# downloading webpages during URL preview generation. This allows
|
|
# Synapse to specify the preferred languages that URL previews should
|
|
# be in when communicating with remote servers.
|
|
#
|
|
# Each value is a IETF language tag; a 2-3 letter identifier for a
|
|
# language, optionally followed by subtags separated by '-', specifying
|
|
# a country or region variant.
|
|
#
|
|
# Multiple values can be provided, and a weight can be added to each by
|
|
# using quality value syntax (;q=). '*' translates to any language.
|
|
#
|
|
# Defaults to "en".
|
|
#
|
|
# Example:
|
|
#
|
|
# url_preview_accept_language:
|
|
# - en-UK
|
|
# - en-US;q=0.9
|
|
# - fr;q=0.8
|
|
# - *;q=0.7
|
|
#
|
|
url_preview_accept_language:
|
|
# - en
|
|
|
|
|
|
## Captcha ##
|
|
# See docs/CAPTCHA_SETUP.md for full details of configuring this.
|
|
|
|
# This homeserver's ReCAPTCHA public key. Must be specified if
|
|
# enable_registration_captcha is enabled.
|
|
#
|
|
#recaptcha_public_key: "YOUR_PUBLIC_KEY"
|
|
|
|
# This homeserver's ReCAPTCHA private key. Must be specified if
|
|
# enable_registration_captcha is enabled.
|
|
#
|
|
#recaptcha_private_key: "YOUR_PRIVATE_KEY"
|
|
|
|
# Uncomment to enable ReCaptcha checks when registering, preventing signup
|
|
# unless a captcha is answered. Requires a valid ReCaptcha
|
|
# public/private key. Defaults to 'false'.
|
|
#
|
|
#enable_registration_captcha: true
|
|
|
|
# The API endpoint to use for verifying m.login.recaptcha responses.
|
|
# Defaults to "https://www.recaptcha.net/recaptcha/api/siteverify".
|
|
#
|
|
#recaptcha_siteverify_api: "https://my.recaptcha.site"
|
|
|
|
|
|
## TURN ##
|
|
|
|
# The public URIs of the TURN server to give to clients
|
|
#
|
|
#turn_uris: []
|
|
|
|
# The shared secret used to compute passwords for the TURN server
|
|
#
|
|
#turn_shared_secret: "YOUR_SHARED_SECRET"
|
|
|
|
# The Username and password if the TURN server needs them and
|
|
# does not use a token
|
|
#
|
|
#turn_username: "TURNSERVER_USERNAME"
|
|
#turn_password: "TURNSERVER_PASSWORD"
|
|
|
|
# How long generated TURN credentials last
|
|
#
|
|
#turn_user_lifetime: 1h
|
|
|
|
# Whether guests should be allowed to use the TURN server.
|
|
# This defaults to True, otherwise VoIP will be unreliable for guests.
|
|
# However, it does introduce a slight security risk as it allows users to
|
|
# connect to arbitrary endpoints without having first signed up for a
|
|
# valid account (e.g. by passing a CAPTCHA).
|
|
#
|
|
#turn_allow_guests: true
|
|
|
|
|
|
## Registration ##
|
|
#
|
|
# Registration can be rate-limited using the parameters in the "Ratelimiting"
|
|
# section of this file.
|
|
|
|
# Enable registration for new users.
|
|
#
|
|
#enable_registration: false
|
|
|
|
# Optional account validity configuration. This allows for accounts to be denied
|
|
# any request after a given period.
|
|
#
|
|
# Once this feature is enabled, Synapse will look for registered users without an
|
|
# expiration date at startup and will add one to every account it found using the
|
|
# current settings at that time.
|
|
# This means that, if a validity period is set, and Synapse is restarted (it will
|
|
# then derive an expiration date from the current validity period), and some time
|
|
# after that the validity period changes and Synapse is restarted, the users'
|
|
# expiration dates won't be updated unless their account is manually renewed. This
|
|
# date will be randomly selected within a range [now + period - d ; now + period],
|
|
# where d is equal to 10% of the validity period.
|
|
#
|
|
account_validity:
|
|
# The account validity feature is disabled by default. Uncomment the
|
|
# following line to enable it.
|
|
#
|
|
#enabled: true
|
|
|
|
# The period after which an account is valid after its registration. When
|
|
# renewing the account, its validity period will be extended by this amount
|
|
# of time. This parameter is required when using the account validity
|
|
# feature.
|
|
#
|
|
#period: 6w
|
|
|
|
# The amount of time before an account's expiry date at which Synapse will
|
|
# send an email to the account's email address with a renewal link. By
|
|
# default, no such emails are sent.
|
|
#
|
|
# If you enable this setting, you will also need to fill out the 'email' and
|
|
# 'public_baseurl' configuration sections.
|
|
#
|
|
#renew_at: 1w
|
|
|
|
# The subject of the email sent out with the renewal link. '%(app)s' can be
|
|
# used as a placeholder for the 'app_name' parameter from the 'email'
|
|
# section.
|
|
#
|
|
# Note that the placeholder must be written '%(app)s', including the
|
|
# trailing 's'.
|
|
#
|
|
# If this is not set, a default value is used.
|
|
#
|
|
#renew_email_subject: "Renew your %(app)s account"
|
|
|
|
# Directory in which Synapse will try to find templates for the HTML files to
|
|
# serve to the user when trying to renew an account. If not set, default
|
|
# templates from within the Synapse package will be used.
|
|
#
|
|
#template_dir: "res/templates"
|
|
|
|
# File within 'template_dir' giving the HTML to be displayed to the user after
|
|
# they successfully renewed their account. If not set, default text is used.
|
|
#
|
|
#account_renewed_html_path: "account_renewed.html"
|
|
|
|
# File within 'template_dir' giving the HTML to be displayed when the user
|
|
# tries to renew an account with an invalid renewal token. If not set,
|
|
# default text is used.
|
|
#
|
|
#invalid_token_html_path: "invalid_token.html"
|
|
|
|
# Time that a user's session remains valid for, after they log in.
|
|
#
|
|
# Note that this is not currently compatible with guest logins.
|
|
#
|
|
# Note also that this is calculated at login time: changes are not applied
|
|
# retrospectively to users who have already logged in.
|
|
#
|
|
# By default, this is infinite.
|
|
#
|
|
#session_lifetime: 24h
|
|
|
|
# The user must provide all of the below types of 3PID when registering.
|
|
#
|
|
#registrations_require_3pid:
|
|
# - email
|
|
# - msisdn
|
|
|
|
# Explicitly disable asking for MSISDNs from the registration
|
|
# flow (overrides registrations_require_3pid if MSISDNs are set as required)
|
|
#
|
|
#disable_msisdn_registration: true
|
|
|
|
# Mandate that users are only allowed to associate certain formats of
|
|
# 3PIDs with accounts on this server.
|
|
#
|
|
#allowed_local_3pids:
|
|
# - medium: email
|
|
# pattern: '.*@matrix\.org'
|
|
# - medium: email
|
|
# pattern: '.*@vector\.im'
|
|
# - medium: msisdn
|
|
# pattern: '\+44'
|
|
|
|
# Enable 3PIDs lookup requests to identity servers from this server.
|
|
#
|
|
#enable_3pid_lookup: true
|
|
|
|
# If set, allows registration of standard or admin accounts by anyone who
|
|
# has the shared secret, even if registration is otherwise disabled.
|
|
#
|
|
#registration_shared_secret: <PRIVATE STRING>
|
|
|
|
# Set the number of bcrypt rounds used to generate password hash.
|
|
# Larger numbers increase the work factor needed to generate the hash.
|
|
# The default number is 12 (which equates to 2^12 rounds).
|
|
# N.B. that increasing this will exponentially increase the time required
|
|
# to register or login - e.g. 24 => 2^24 rounds which will take >20 mins.
|
|
#
|
|
#bcrypt_rounds: 12
|
|
|
|
# Allows users to register as guests without a password/email/etc, and
|
|
# participate in rooms hosted on this server which have been made
|
|
# accessible to anonymous users.
|
|
#
|
|
#allow_guest_access: false
|
|
|
|
# The identity server which we suggest that clients should use when users log
|
|
# in on this server.
|
|
#
|
|
# (By default, no suggestion is made, so it is left up to the client.
|
|
# This setting is ignored unless public_baseurl is also set.)
|
|
#
|
|
#default_identity_server: https://matrix.org
|
|
|
|
# Handle threepid (email/phone etc) registration and password resets through a set of
|
|
# *trusted* identity servers. Note that this allows the configured identity server to
|
|
# reset passwords for accounts!
|
|
#
|
|
# Be aware that if `email` is not set, and SMTP options have not been
|
|
# configured in the email config block, registration and user password resets via
|
|
# email will be globally disabled.
|
|
#
|
|
# Additionally, if `msisdn` is not set, registration and password resets via msisdn
|
|
# will be disabled regardless, and users will not be able to associate an msisdn
|
|
# identifier to their account. This is due to Synapse currently not supporting
|
|
# any method of sending SMS messages on its own.
|
|
#
|
|
# To enable using an identity server for operations regarding a particular third-party
|
|
# identifier type, set the value to the URL of that identity server as shown in the
|
|
# examples below.
|
|
#
|
|
# Servers handling the these requests must answer the `/requestToken` endpoints defined
|
|
# by the Matrix Identity Service API specification:
|
|
# https://matrix.org/docs/spec/identity_service/latest
|
|
#
|
|
# If a delegate is specified, the config option public_baseurl must also be filled out.
|
|
#
|
|
account_threepid_delegates:
|
|
#email: https://example.com # Delegate email sending to example.com
|
|
#msisdn: http://localhost:8090 # Delegate SMS sending to this local process
|
|
|
|
# Whether users are allowed to change their displayname after it has
|
|
# been initially set. Useful when provisioning users based on the
|
|
# contents of a third-party directory.
|
|
#
|
|
# Does not apply to server administrators. Defaults to 'true'
|
|
#
|
|
#enable_set_displayname: false
|
|
|
|
# Whether users are allowed to change their avatar after it has been
|
|
# initially set. Useful when provisioning users based on the contents
|
|
# of a third-party directory.
|
|
#
|
|
# Does not apply to server administrators. Defaults to 'true'
|
|
#
|
|
#enable_set_avatar_url: false
|
|
|
|
# Whether users can change the 3PIDs associated with their accounts
|
|
# (email address and msisdn).
|
|
#
|
|
# Defaults to 'true'
|
|
#
|
|
#enable_3pid_changes: false
|
|
|
|
# Users who register on this homeserver will automatically be joined
|
|
# to these rooms.
|
|
#
|
|
# By default, any room aliases included in this list will be created
|
|
# as a publicly joinable room when the first user registers for the
|
|
# homeserver. This behaviour can be customised with the settings below.
|
|
#
|
|
#auto_join_rooms:
|
|
# - "#example:example.com"
|
|
|
|
# Where auto_join_rooms are specified, setting this flag ensures that the
|
|
# the rooms exist by creating them when the first user on the
|
|
# homeserver registers.
|
|
#
|
|
# By default the auto-created rooms are publicly joinable from any federated
|
|
# server. Use the autocreate_auto_join_rooms_federated and
|
|
# autocreate_auto_join_room_preset settings below to customise this behaviour.
|
|
#
|
|
# Setting to false means that if the rooms are not manually created,
|
|
# users cannot be auto-joined since they do not exist.
|
|
#
|
|
# Defaults to true. Uncomment the following line to disable automatically
|
|
# creating auto-join rooms.
|
|
#
|
|
#autocreate_auto_join_rooms: false
|
|
|
|
# Whether the auto_join_rooms that are auto-created are available via
|
|
# federation. Only has an effect if autocreate_auto_join_rooms is true.
|
|
#
|
|
# Note that whether a room is federated cannot be modified after
|
|
# creation.
|
|
#
|
|
# Defaults to true: the room will be joinable from other servers.
|
|
# Uncomment the following to prevent users from other homeservers from
|
|
# joining these rooms.
|
|
#
|
|
#autocreate_auto_join_rooms_federated: false
|
|
|
|
# The room preset to use when auto-creating one of auto_join_rooms. Only has an
|
|
# effect if autocreate_auto_join_rooms is true.
|
|
#
|
|
# This can be one of "public_chat", "private_chat", or "trusted_private_chat".
|
|
# If a value of "private_chat" or "trusted_private_chat" is used then
|
|
# auto_join_mxid_localpart must also be configured.
|
|
#
|
|
# Defaults to "public_chat", meaning that the room is joinable by anyone, including
|
|
# federated servers if autocreate_auto_join_rooms_federated is true (the default).
|
|
# Uncomment the following to require an invitation to join these rooms.
|
|
#
|
|
#autocreate_auto_join_room_preset: private_chat
|
|
|
|
# The local part of the user id which is used to create auto_join_rooms if
|
|
# autocreate_auto_join_rooms is true. If this is not provided then the
|
|
# initial user account that registers will be used to create the rooms.
|
|
#
|
|
# The user id is also used to invite new users to any auto-join rooms which
|
|
# are set to invite-only.
|
|
#
|
|
# It *must* be configured if autocreate_auto_join_room_preset is set to
|
|
# "private_chat" or "trusted_private_chat".
|
|
#
|
|
# Note that this must be specified in order for new users to be correctly
|
|
# invited to any auto-join rooms which have been set to invite-only (either
|
|
# at the time of creation or subsequently).
|
|
#
|
|
# Note that, if the room already exists, this user must be joined and
|
|
# have the appropriate permissions to invite new members.
|
|
#
|
|
#auto_join_mxid_localpart: system
|
|
|
|
# When auto_join_rooms is specified, setting this flag to false prevents
|
|
# guest accounts from being automatically joined to the rooms.
|
|
#
|
|
# Defaults to true.
|
|
#
|
|
#auto_join_rooms_for_guests: false
|
|
|
|
|
|
## Metrics ###
|
|
|
|
# Enable collection and rendering of performance metrics
|
|
#
|
|
#enable_metrics: false
|
|
|
|
# Enable sentry integration
|
|
# NOTE: While attempts are made to ensure that the logs don't contain
|
|
# any sensitive information, this cannot be guaranteed. By enabling
|
|
# this option the sentry server may therefore receive sensitive
|
|
# information, and it in turn may then diseminate sensitive information
|
|
# through insecure notification channels if so configured.
|
|
#
|
|
#sentry:
|
|
# dsn: "..."
|
|
|
|
# Flags to enable Prometheus metrics which are not suitable to be
|
|
# enabled by default, either for performance reasons or limited use.
|
|
#
|
|
metrics_flags:
|
|
# Publish synapse_federation_known_servers, a gauge of the number of
|
|
# servers this homeserver knows about, including itself. May cause
|
|
# performance problems on large homeservers.
|
|
#
|
|
#known_servers: true
|
|
|
|
# Whether or not to report anonymized homeserver usage statistics.
|
|
#
|
|
#report_stats: true|false
|
|
|
|
# The endpoint to report the anonymized homeserver usage statistics to.
|
|
# Defaults to https://matrix.org/report-usage-stats/push
|
|
#
|
|
#report_stats_endpoint: https://example.com/report-usage-stats/push
|
|
|
|
|
|
## API Configuration ##
|
|
|
|
# A list of event types that will be included in the room_invite_state
|
|
#
|
|
#room_invite_state_types:
|
|
# - "m.room.join_rules"
|
|
# - "m.room.canonical_alias"
|
|
# - "m.room.avatar"
|
|
# - "m.room.encryption"
|
|
# - "m.room.name"
|
|
|
|
|
|
# A list of application service config files to use
|
|
#
|
|
#app_service_config_files:
|
|
# - app_service_1.yaml
|
|
# - app_service_2.yaml
|
|
|
|
# Uncomment to enable tracking of application service IP addresses. Implicitly
|
|
# enables MAU tracking for application service users.
|
|
#
|
|
#track_appservice_user_ips: true
|
|
|
|
|
|
# a secret which is used to sign access tokens. If none is specified,
|
|
# the registration_shared_secret is used, if one is given; otherwise,
|
|
# a secret key is derived from the signing key.
|
|
#
|
|
#macaroon_secret_key: <PRIVATE STRING>
|
|
|
|
# a secret which is used to calculate HMACs for form values, to stop
|
|
# falsification of values. Must be specified for the User Consent
|
|
# forms to work.
|
|
#
|
|
#form_secret: <PRIVATE STRING>
|
|
|
|
## Signing Keys ##
|
|
|
|
# Path to the signing key to sign messages with
|
|
#
|
|
signing_key_path: "CONFDIR/SERVERNAME.signing.key"
|
|
|
|
# The keys that the server used to sign messages with but won't use
|
|
# to sign new messages.
|
|
#
|
|
old_signing_keys:
|
|
# For each key, `key` should be the base64-encoded public key, and
|
|
# `expired_ts`should be the time (in milliseconds since the unix epoch) that
|
|
# it was last used.
|
|
#
|
|
# It is possible to build an entry from an old signing.key file using the
|
|
# `export_signing_key` script which is provided with synapse.
|
|
#
|
|
# For example:
|
|
#
|
|
#"ed25519:id": { key: "base64string", expired_ts: 123456789123 }
|
|
|
|
# How long key response published by this server is valid for.
|
|
# Used to set the valid_until_ts in /key/v2 APIs.
|
|
# Determines how quickly servers will query to check which keys
|
|
# are still valid.
|
|
#
|
|
#key_refresh_interval: 1d
|
|
|
|
# The trusted servers to download signing keys from.
|
|
#
|
|
# When we need to fetch a signing key, each server is tried in parallel.
|
|
#
|
|
# Normally, the connection to the key server is validated via TLS certificates.
|
|
# Additional security can be provided by configuring a `verify key`, which
|
|
# will make synapse check that the response is signed by that key.
|
|
#
|
|
# This setting supercedes an older setting named `perspectives`. The old format
|
|
# is still supported for backwards-compatibility, but it is deprecated.
|
|
#
|
|
# 'trusted_key_servers' defaults to matrix.org, but using it will generate a
|
|
# warning on start-up. To suppress this warning, set
|
|
# 'suppress_key_server_warning' to true.
|
|
#
|
|
# Options for each entry in the list include:
|
|
#
|
|
# server_name: the name of the server. required.
|
|
#
|
|
# verify_keys: an optional map from key id to base64-encoded public key.
|
|
# If specified, we will check that the response is signed by at least
|
|
# one of the given keys.
|
|
#
|
|
# accept_keys_insecurely: a boolean. Normally, if `verify_keys` is unset,
|
|
# and federation_verify_certificates is not `true`, synapse will refuse
|
|
# to start, because this would allow anyone who can spoof DNS responses
|
|
# to masquerade as the trusted key server. If you know what you are doing
|
|
# and are sure that your network environment provides a secure connection
|
|
# to the key server, you can set this to `true` to override this
|
|
# behaviour.
|
|
#
|
|
# An example configuration might look like:
|
|
#
|
|
#trusted_key_servers:
|
|
# - server_name: "my_trusted_server.example.com"
|
|
# verify_keys:
|
|
# "ed25519:auto": "abcdefghijklmnopqrstuvwxyzabcdefghijklmopqr"
|
|
# - server_name: "my_other_trusted_server.example.com"
|
|
#
|
|
trusted_key_servers:
|
|
- server_name: "matrix.org"
|
|
|
|
# Uncomment the following to disable the warning that is emitted when the
|
|
# trusted_key_servers include 'matrix.org'. See above.
|
|
#
|
|
#suppress_key_server_warning: true
|
|
|
|
# The signing keys to use when acting as a trusted key server. If not specified
|
|
# defaults to the server signing key.
|
|
#
|
|
# Can contain multiple keys, one per line.
|
|
#
|
|
#key_server_signing_keys_path: "key_server_signing_keys.key"
|
|
|
|
|
|
## Single sign-on integration ##
|
|
|
|
# The following settings can be used to make Synapse use a single sign-on
|
|
# provider for authentication, instead of its internal password database.
|
|
#
|
|
# You will probably also want to set the following options to `false` to
|
|
# disable the regular login/registration flows:
|
|
# * enable_registration
|
|
# * password_config.enabled
|
|
#
|
|
# You will also want to investigate the settings under the "sso" configuration
|
|
# section below.
|
|
|
|
# Enable SAML2 for registration and login. Uses pysaml2.
|
|
#
|
|
# At least one of `sp_config` or `config_path` must be set in this section to
|
|
# enable SAML login.
|
|
#
|
|
# Once SAML support is enabled, a metadata file will be exposed at
|
|
# https://<server>:<port>/_matrix/saml2/metadata.xml, which you may be able to
|
|
# use to configure your SAML IdP with. Alternatively, you can manually configure
|
|
# the IdP to use an ACS location of
|
|
# https://<server>:<port>/_matrix/saml2/authn_response.
|
|
#
|
|
saml2_config:
|
|
# `sp_config` is the configuration for the pysaml2 Service Provider.
|
|
# See pysaml2 docs for format of config.
|
|
#
|
|
# Default values will be used for the 'entityid' and 'service' settings,
|
|
# so it is not normally necessary to specify them unless you need to
|
|
# override them.
|
|
#
|
|
sp_config:
|
|
# Point this to the IdP's metadata. You must provide either a local
|
|
# file via the `local` attribute or (preferably) a URL via the
|
|
# `remote` attribute.
|
|
#
|
|
#metadata:
|
|
# local: ["saml2/idp.xml"]
|
|
# remote:
|
|
# - url: https://our_idp/metadata.xml
|
|
|
|
# Allowed clock difference in seconds between the homeserver and IdP.
|
|
#
|
|
# Uncomment the below to increase the accepted time difference from 0 to 3 seconds.
|
|
#
|
|
#accepted_time_diff: 3
|
|
|
|
# By default, the user has to go to our login page first. If you'd like
|
|
# to allow IdP-initiated login, set 'allow_unsolicited: true' in a
|
|
# 'service.sp' section:
|
|
#
|
|
#service:
|
|
# sp:
|
|
# allow_unsolicited: true
|
|
|
|
# The examples below are just used to generate our metadata xml, and you
|
|
# may well not need them, depending on your setup. Alternatively you
|
|
# may need a whole lot more detail - see the pysaml2 docs!
|
|
|
|
#description: ["My awesome SP", "en"]
|
|
#name: ["Test SP", "en"]
|
|
|
|
#ui_info:
|
|
# display_name:
|
|
# - lang: en
|
|
# text: "Display Name is the descriptive name of your service."
|
|
# description:
|
|
# - lang: en
|
|
# text: "Description should be a short paragraph explaining the purpose of the service."
|
|
# information_url:
|
|
# - lang: en
|
|
# text: "https://example.com/terms-of-service"
|
|
# privacy_statement_url:
|
|
# - lang: en
|
|
# text: "https://example.com/privacy-policy"
|
|
# keywords:
|
|
# - lang: en
|
|
# text: ["Matrix", "Element"]
|
|
# logo:
|
|
# - lang: en
|
|
# text: "https://example.com/logo.svg"
|
|
# width: "200"
|
|
# height: "80"
|
|
|
|
#organization:
|
|
# name: Example com
|
|
# display_name:
|
|
# - ["Example co", "en"]
|
|
# url: "http://example.com"
|
|
|
|
#contact_person:
|
|
# - given_name: Bob
|
|
# sur_name: "the Sysadmin"
|
|
# email_address": ["admin@example.com"]
|
|
# contact_type": technical
|
|
|
|
# Instead of putting the config inline as above, you can specify a
|
|
# separate pysaml2 configuration file:
|
|
#
|
|
#config_path: "CONFDIR/sp_conf.py"
|
|
|
|
# The lifetime of a SAML session. This defines how long a user has to
|
|
# complete the authentication process, if allow_unsolicited is unset.
|
|
# The default is 15 minutes.
|
|
#
|
|
#saml_session_lifetime: 5m
|
|
|
|
# An external module can be provided here as a custom solution to
|
|
# mapping attributes returned from a saml provider onto a matrix user.
|
|
#
|
|
user_mapping_provider:
|
|
# The custom module's class. Uncomment to use a custom module.
|
|
#
|
|
#module: mapping_provider.SamlMappingProvider
|
|
|
|
# Custom configuration values for the module. Below options are
|
|
# intended for the built-in provider, they should be changed if
|
|
# using a custom module. This section will be passed as a Python
|
|
# dictionary to the module's `parse_config` method.
|
|
#
|
|
config:
|
|
# The SAML attribute (after mapping via the attribute maps) to use
|
|
# to derive the Matrix ID from. 'uid' by default.
|
|
#
|
|
# Note: This used to be configured by the
|
|
# saml2_config.mxid_source_attribute option. If that is still
|
|
# defined, its value will be used instead.
|
|
#
|
|
#mxid_source_attribute: displayName
|
|
|
|
# The mapping system to use for mapping the saml attribute onto a
|
|
# matrix ID.
|
|
#
|
|
# Options include:
|
|
# * 'hexencode' (which maps unpermitted characters to '=xx')
|
|
# * 'dotreplace' (which replaces unpermitted characters with
|
|
# '.').
|
|
# The default is 'hexencode'.
|
|
#
|
|
# Note: This used to be configured by the
|
|
# saml2_config.mxid_mapping option. If that is still defined, its
|
|
# value will be used instead.
|
|
#
|
|
#mxid_mapping: dotreplace
|
|
|
|
# In previous versions of synapse, the mapping from SAML attribute to
|
|
# MXID was always calculated dynamically rather than stored in a
|
|
# table. For backwards- compatibility, we will look for user_ids
|
|
# matching such a pattern before creating a new account.
|
|
#
|
|
# This setting controls the SAML attribute which will be used for this
|
|
# backwards-compatibility lookup. Typically it should be 'uid', but if
|
|
# the attribute maps are changed, it may be necessary to change it.
|
|
#
|
|
# The default is 'uid'.
|
|
#
|
|
#grandfathered_mxid_source_attribute: upn
|
|
|
|
# It is possible to configure Synapse to only allow logins if SAML attributes
|
|
# match particular values. The requirements can be listed under
|
|
# `attribute_requirements` as shown below. All of the listed attributes must
|
|
# match for the login to be permitted.
|
|
#
|
|
#attribute_requirements:
|
|
# - attribute: userGroup
|
|
# value: "staff"
|
|
# - attribute: department
|
|
# value: "sales"
|
|
|
|
# If the metadata XML contains multiple IdP entities then the `idp_entityid`
|
|
# option must be set to the entity to redirect users to.
|
|
#
|
|
# Most deployments only have a single IdP entity and so should omit this
|
|
# option.
|
|
#
|
|
#idp_entityid: 'https://our_idp/entityid'
|
|
|
|
|
|
# Enable OpenID Connect (OIDC) / OAuth 2.0 for registration and login.
|
|
#
|
|
# See https://github.com/matrix-org/synapse/blob/master/docs/openid.md
|
|
# for some example configurations.
|
|
#
|
|
oidc_config:
|
|
# Uncomment the following to enable authorization against an OpenID Connect
|
|
# server. Defaults to false.
|
|
#
|
|
#enabled: true
|
|
|
|
# Uncomment the following to disable use of the OIDC discovery mechanism to
|
|
# discover endpoints. Defaults to true.
|
|
#
|
|
#discover: false
|
|
|
|
# the OIDC issuer. Used to validate tokens and (if discovery is enabled) to
|
|
# discover the provider's endpoints.
|
|
#
|
|
# Required if 'enabled' is true.
|
|
#
|
|
#issuer: "https://accounts.example.com/"
|
|
|
|
# oauth2 client id to use.
|
|
#
|
|
# Required if 'enabled' is true.
|
|
#
|
|
#client_id: "provided-by-your-issuer"
|
|
|
|
# oauth2 client secret to use.
|
|
#
|
|
# Required if 'enabled' is true.
|
|
#
|
|
#client_secret: "provided-by-your-issuer"
|
|
|
|
# auth method to use when exchanging the token.
|
|
# Valid values are 'client_secret_basic' (default), 'client_secret_post' and
|
|
# 'none'.
|
|
#
|
|
#client_auth_method: client_secret_post
|
|
|
|
# list of scopes to request. This should normally include the "openid" scope.
|
|
# Defaults to ["openid"].
|
|
#
|
|
#scopes: ["openid", "profile"]
|
|
|
|
# the oauth2 authorization endpoint. Required if provider discovery is disabled.
|
|
#
|
|
#authorization_endpoint: "https://accounts.example.com/oauth2/auth"
|
|
|
|
# the oauth2 token endpoint. Required if provider discovery is disabled.
|
|
#
|
|
#token_endpoint: "https://accounts.example.com/oauth2/token"
|
|
|
|
# the OIDC userinfo endpoint. Required if discovery is disabled and the
|
|
# "openid" scope is not requested.
|
|
#
|
|
#userinfo_endpoint: "https://accounts.example.com/userinfo"
|
|
|
|
# URI where to fetch the JWKS. Required if discovery is disabled and the
|
|
# "openid" scope is used.
|
|
#
|
|
#jwks_uri: "https://accounts.example.com/.well-known/jwks.json"
|
|
|
|
# Uncomment to skip metadata verification. Defaults to false.
|
|
#
|
|
# Use this if you are connecting to a provider that is not OpenID Connect
|
|
# compliant.
|
|
# Avoid this in production.
|
|
#
|
|
#skip_verification: true
|
|
|
|
# Whether to fetch the user profile from the userinfo endpoint. Valid
|
|
# values are: "auto" or "userinfo_endpoint".
|
|
#
|
|
# Defaults to "auto", which fetches the userinfo endpoint if "openid" is included
|
|
# in `scopes`. Uncomment the following to always fetch the userinfo endpoint.
|
|
#
|
|
#user_profile_method: "userinfo_endpoint"
|
|
|
|
# Uncomment to allow a user logging in via OIDC to match a pre-existing account instead
|
|
# of failing. This could be used if switching from password logins to OIDC. Defaults to false.
|
|
#
|
|
#allow_existing_users: true
|
|
|
|
# An external module can be provided here as a custom solution to mapping
|
|
# attributes returned from a OIDC provider onto a matrix user.
|
|
#
|
|
user_mapping_provider:
|
|
# The custom module's class. Uncomment to use a custom module.
|
|
# Default is 'synapse.handlers.oidc_handler.JinjaOidcMappingProvider'.
|
|
#
|
|
# See https://github.com/matrix-org/synapse/blob/master/docs/sso_mapping_providers.md#openid-mapping-providers
|
|
# for information on implementing a custom mapping provider.
|
|
#
|
|
#module: mapping_provider.OidcMappingProvider
|
|
|
|
# Custom configuration values for the module. This section will be passed as
|
|
# a Python dictionary to the user mapping provider module's `parse_config`
|
|
# method.
|
|
#
|
|
# The examples below are intended for the default provider: they should be
|
|
# changed if using a custom provider.
|
|
#
|
|
config:
|
|
# name of the claim containing a unique identifier for the user.
|
|
# Defaults to `sub`, which OpenID Connect compliant providers should provide.
|
|
#
|
|
#subject_claim: "sub"
|
|
|
|
# Jinja2 template for the localpart of the MXID.
|
|
#
|
|
# When rendering, this template is given the following variables:
|
|
# * user: The claims returned by the UserInfo Endpoint and/or in the ID
|
|
# Token
|
|
#
|
|
# This must be configured if using the default mapping provider.
|
|
#
|
|
localpart_template: "{{ user.preferred_username }}"
|
|
|
|
# Jinja2 template for the display name to set on first login.
|
|
#
|
|
# If unset, no displayname will be set.
|
|
#
|
|
#display_name_template: "{{ user.given_name }} {{ user.last_name }}"
|
|
|
|
# Jinja2 templates for extra attributes to send back to the client during
|
|
# login.
|
|
#
|
|
# Note that these are non-standard and clients will ignore them without modifications.
|
|
#
|
|
#extra_attributes:
|
|
#birthdate: "{{ user.birthdate }}"
|
|
|
|
|
|
|
|
# Enable Central Authentication Service (CAS) for registration and login.
|
|
#
|
|
cas_config:
|
|
# Uncomment the following to enable authorization against a CAS server.
|
|
# Defaults to false.
|
|
#
|
|
#enabled: true
|
|
|
|
# The URL of the CAS authorization endpoint.
|
|
#
|
|
#server_url: "https://cas-server.com"
|
|
|
|
# The public URL of the homeserver.
|
|
#
|
|
#service_url: "https://homeserver.domain.com:8448"
|
|
|
|
# The attribute of the CAS response to use as the display name.
|
|
#
|
|
# If unset, no displayname will be set.
|
|
#
|
|
#displayname_attribute: name
|
|
|
|
# It is possible to configure Synapse to only allow logins if CAS attributes
|
|
# match particular values. All of the keys in the mapping below must exist
|
|
# and the values must match the given value. Alternately if the given value
|
|
# is None then any value is allowed (the attribute just must exist).
|
|
# All of the listed attributes must match for the login to be permitted.
|
|
#
|
|
#required_attributes:
|
|
# userGroup: "staff"
|
|
# department: None
|
|
|
|
|
|
# Additional settings to use with single-sign on systems such as OpenID Connect,
|
|
# SAML2 and CAS.
|
|
#
|
|
sso:
|
|
# A list of client URLs which are whitelisted so that the user does not
|
|
# have to confirm giving access to their account to the URL. Any client
|
|
# whose URL starts with an entry in the following list will not be subject
|
|
# to an additional confirmation step after the SSO login is completed.
|
|
#
|
|
# WARNING: An entry such as "https://my.client" is insecure, because it
|
|
# will also match "https://my.client.evil.site", exposing your users to
|
|
# phishing attacks from evil.site. To avoid this, include a slash after the
|
|
# hostname: "https://my.client/".
|
|
#
|
|
# If public_baseurl is set, then the login fallback page (used by clients
|
|
# that don't natively support the required login flows) is whitelisted in
|
|
# addition to any URLs in this list.
|
|
#
|
|
# By default, this list is empty.
|
|
#
|
|
#client_whitelist:
|
|
# - https://riot.im/develop
|
|
# - https://my.custom.client/
|
|
|
|
# Directory in which Synapse will try to find the template files below.
|
|
# If not set, default templates from within the Synapse package will be used.
|
|
#
|
|
# DO NOT UNCOMMENT THIS SETTING unless you want to customise the templates.
|
|
# If you *do* uncomment it, you will need to make sure that all the templates
|
|
# below are in the directory.
|
|
#
|
|
# Synapse will look for the following templates in this directory:
|
|
#
|
|
# * HTML page for a confirmation step before redirecting back to the client
|
|
# with the login token: 'sso_redirect_confirm.html'.
|
|
#
|
|
# When rendering, this template is given three variables:
|
|
# * redirect_url: the URL the user is about to be redirected to. Needs
|
|
# manual escaping (see
|
|
# https://jinja.palletsprojects.com/en/2.11.x/templates/#html-escaping).
|
|
#
|
|
# * display_url: the same as `redirect_url`, but with the query
|
|
# parameters stripped. The intention is to have a
|
|
# human-readable URL to show to users, not to use it as
|
|
# the final address to redirect to. Needs manual escaping
|
|
# (see https://jinja.palletsprojects.com/en/2.11.x/templates/#html-escaping).
|
|
#
|
|
# * server_name: the homeserver's name.
|
|
#
|
|
# * HTML page which notifies the user that they are authenticating to confirm
|
|
# an operation on their account during the user interactive authentication
|
|
# process: 'sso_auth_confirm.html'.
|
|
#
|
|
# When rendering, this template is given the following variables:
|
|
# * redirect_url: the URL the user is about to be redirected to. Needs
|
|
# manual escaping (see
|
|
# https://jinja.palletsprojects.com/en/2.11.x/templates/#html-escaping).
|
|
#
|
|
# * description: the operation which the user is being asked to confirm
|
|
#
|
|
# * HTML page shown after a successful user interactive authentication session:
|
|
# 'sso_auth_success.html'.
|
|
#
|
|
# Note that this page must include the JavaScript which notifies of a successful authentication
|
|
# (see https://matrix.org/docs/spec/client_server/r0.6.0#fallback).
|
|
#
|
|
# This template has no additional variables.
|
|
#
|
|
# * HTML page shown during single sign-on if a deactivated user (according to Synapse's database)
|
|
# attempts to login: 'sso_account_deactivated.html'.
|
|
#
|
|
# This template has no additional variables.
|
|
#
|
|
# * HTML page to display to users if something goes wrong during the
|
|
# OpenID Connect authentication process: 'sso_error.html'.
|
|
#
|
|
# When rendering, this template is given two variables:
|
|
# * error: the technical name of the error
|
|
# * error_description: a human-readable message for the error
|
|
#
|
|
# You can see the default templates at:
|
|
# https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
|
|
#
|
|
#template_dir: "res/templates"
|
|
|
|
|
|
# JSON web token integration. The following settings can be used to make
|
|
# Synapse JSON web tokens for authentication, instead of its internal
|
|
# password database.
|
|
#
|
|
# Each JSON Web Token needs to contain a "sub" (subject) claim, which is
|
|
# used as the localpart of the mxid.
|
|
#
|
|
# Additionally, the expiration time ("exp"), not before time ("nbf"),
|
|
# and issued at ("iat") claims are validated if present.
|
|
#
|
|
# Note that this is a non-standard login type and client support is
|
|
# expected to be non-existent.
|
|
#
|
|
# See https://github.com/matrix-org/synapse/blob/master/docs/jwt.md.
|
|
#
|
|
#jwt_config:
|
|
# Uncomment the following to enable authorization using JSON web
|
|
# tokens. Defaults to false.
|
|
#
|
|
#enabled: true
|
|
|
|
# This is either the private shared secret or the public key used to
|
|
# decode the contents of the JSON web token.
|
|
#
|
|
# Required if 'enabled' is true.
|
|
#
|
|
#secret: "provided-by-your-issuer"
|
|
|
|
# The algorithm used to sign the JSON web token.
|
|
#
|
|
# Supported algorithms are listed at
|
|
# https://pyjwt.readthedocs.io/en/latest/algorithms.html
|
|
#
|
|
# Required if 'enabled' is true.
|
|
#
|
|
#algorithm: "provided-by-your-issuer"
|
|
|
|
# The issuer to validate the "iss" claim against.
|
|
#
|
|
# Optional, if provided the "iss" claim will be required and
|
|
# validated for all JSON web tokens.
|
|
#
|
|
#issuer: "provided-by-your-issuer"
|
|
|
|
# A list of audiences to validate the "aud" claim against.
|
|
#
|
|
# Optional, if provided the "aud" claim will be required and
|
|
# validated for all JSON web tokens.
|
|
#
|
|
# Note that if the "aud" claim is included in a JSON web token then
|
|
# validation will fail without configuring audiences.
|
|
#
|
|
#audiences:
|
|
# - "provided-by-your-issuer"
|
|
|
|
|
|
password_config:
|
|
# Uncomment to disable password login
|
|
#
|
|
#enabled: false
|
|
|
|
# Uncomment to disable authentication against the local password
|
|
# database. This is ignored if `enabled` is false, and is only useful
|
|
# if you have other password_providers.
|
|
#
|
|
#localdb_enabled: false
|
|
|
|
# Uncomment and change to a secret random string for extra security.
|
|
# DO NOT CHANGE THIS AFTER INITIAL SETUP!
|
|
#
|
|
#pepper: "EVEN_MORE_SECRET"
|
|
|
|
# Define and enforce a password policy. Each parameter is optional.
|
|
# This is an implementation of MSC2000.
|
|
#
|
|
policy:
|
|
# Whether to enforce the password policy.
|
|
# Defaults to 'false'.
|
|
#
|
|
#enabled: true
|
|
|
|
# Minimum accepted length for a password.
|
|
# Defaults to 0.
|
|
#
|
|
#minimum_length: 15
|
|
|
|
# Whether a password must contain at least one digit.
|
|
# Defaults to 'false'.
|
|
#
|
|
#require_digit: true
|
|
|
|
# Whether a password must contain at least one symbol.
|
|
# A symbol is any character that's not a number or a letter.
|
|
# Defaults to 'false'.
|
|
#
|
|
#require_symbol: true
|
|
|
|
# Whether a password must contain at least one lowercase letter.
|
|
# Defaults to 'false'.
|
|
#
|
|
#require_lowercase: true
|
|
|
|
# Whether a password must contain at least one lowercase letter.
|
|
# Defaults to 'false'.
|
|
#
|
|
#require_uppercase: true
|
|
|
|
|
|
# Configuration for sending emails from Synapse.
|
|
#
|
|
email:
|
|
# The hostname of the outgoing SMTP server to use. Defaults to 'localhost'.
|
|
#
|
|
#smtp_host: mail.server
|
|
|
|
# The port on the mail server for outgoing SMTP. Defaults to 25.
|
|
#
|
|
#smtp_port: 587
|
|
|
|
# Username/password for authentication to the SMTP server. By default, no
|
|
# authentication is attempted.
|
|
#
|
|
#smtp_user: "exampleusername"
|
|
#smtp_pass: "examplepassword"
|
|
|
|
# Uncomment the following to require TLS transport security for SMTP.
|
|
# By default, Synapse will connect over plain text, and will then switch to
|
|
# TLS via STARTTLS *if the SMTP server supports it*. If this option is set,
|
|
# Synapse will refuse to connect unless the server supports STARTTLS.
|
|
#
|
|
#require_transport_security: true
|
|
|
|
# notif_from defines the "From" address to use when sending emails.
|
|
# It must be set if email sending is enabled.
|
|
#
|
|
# The placeholder '%(app)s' will be replaced by the application name,
|
|
# which is normally 'app_name' (below), but may be overridden by the
|
|
# Matrix client application.
|
|
#
|
|
# Note that the placeholder must be written '%(app)s', including the
|
|
# trailing 's'.
|
|
#
|
|
#notif_from: "Your Friendly %(app)s homeserver <noreply@example.com>"
|
|
|
|
# app_name defines the default value for '%(app)s' in notif_from and email
|
|
# subjects. It defaults to 'Matrix'.
|
|
#
|
|
#app_name: my_branded_matrix_server
|
|
|
|
# Uncomment the following to enable sending emails for messages that the user
|
|
# has missed. Disabled by default.
|
|
#
|
|
#enable_notifs: true
|
|
|
|
# Uncomment the following to disable automatic subscription to email
|
|
# notifications for new users. Enabled by default.
|
|
#
|
|
#notif_for_new_users: false
|
|
|
|
# Custom URL for client links within the email notifications. By default
|
|
# links will be based on "https://matrix.to".
|
|
#
|
|
# (This setting used to be called riot_base_url; the old name is still
|
|
# supported for backwards-compatibility but is now deprecated.)
|
|
#
|
|
#client_base_url: "http://localhost/riot"
|
|
|
|
# Configure the time that a validation email will expire after sending.
|
|
# Defaults to 1h.
|
|
#
|
|
#validation_token_lifetime: 15m
|
|
|
|
# Directory in which Synapse will try to find the template files below.
|
|
# If not set, default templates from within the Synapse package will be used.
|
|
#
|
|
# Do not uncomment this setting unless you want to customise the templates.
|
|
#
|
|
# Synapse will look for the following templates in this directory:
|
|
#
|
|
# * The contents of email notifications of missed events: 'notif_mail.html' and
|
|
# 'notif_mail.txt'.
|
|
#
|
|
# * The contents of account expiry notice emails: 'notice_expiry.html' and
|
|
# 'notice_expiry.txt'.
|
|
#
|
|
# * The contents of password reset emails sent by the homeserver:
|
|
# 'password_reset.html' and 'password_reset.txt'
|
|
#
|
|
# * An HTML page that a user will see when they follow the link in the password
|
|
# reset email. The user will be asked to confirm the action before their
|
|
# password is reset: 'password_reset_confirmation.html'
|
|
#
|
|
# * HTML pages for success and failure that a user will see when they confirm
|
|
# the password reset flow using the page above: 'password_reset_success.html'
|
|
# and 'password_reset_failure.html'
|
|
#
|
|
# * The contents of address verification emails sent during registration:
|
|
# 'registration.html' and 'registration.txt'
|
|
#
|
|
# * HTML pages for success and failure that a user will see when they follow
|
|
# the link in an address verification email sent during registration:
|
|
# 'registration_success.html' and 'registration_failure.html'
|
|
#
|
|
# * The contents of address verification emails sent when an address is added
|
|
# to a Matrix account: 'add_threepid.html' and 'add_threepid.txt'
|
|
#
|
|
# * HTML pages for success and failure that a user will see when they follow
|
|
# the link in an address verification email sent when an address is added
|
|
# to a Matrix account: 'add_threepid_success.html' and
|
|
# 'add_threepid_failure.html'
|
|
#
|
|
# You can see the default templates at:
|
|
# https://github.com/matrix-org/synapse/tree/master/synapse/res/templates
|
|
#
|
|
#template_dir: "res/templates"
|
|
|
|
# Subjects to use when sending emails from Synapse.
|
|
#
|
|
# The placeholder '%(app)s' will be replaced with the value of the 'app_name'
|
|
# setting above, or by a value dictated by the Matrix client application.
|
|
#
|
|
# If a subject isn't overridden in this configuration file, the value used as
|
|
# its example will be used.
|
|
#
|
|
#subjects:
|
|
|
|
# Subjects for notification emails.
|
|
#
|
|
# On top of the '%(app)s' placeholder, these can use the following
|
|
# placeholders:
|
|
#
|
|
# * '%(person)s', which will be replaced by the display name of the user(s)
|
|
# that sent the message(s), e.g. "Alice and Bob".
|
|
# * '%(room)s', which will be replaced by the name of the room the
|
|
# message(s) have been sent to, e.g. "My super room".
|
|
#
|
|
# See the example provided for each setting to see which placeholder can be
|
|
# used and how to use them.
|
|
#
|
|
# Subject to use to notify about one message from one or more user(s) in a
|
|
# room which has a name.
|
|
#message_from_person_in_room: "[%(app)s] You have a message on %(app)s from %(person)s in the %(room)s room..."
|
|
#
|
|
# Subject to use to notify about one message from one or more user(s) in a
|
|
# room which doesn't have a name.
|
|
#message_from_person: "[%(app)s] You have a message on %(app)s from %(person)s..."
|
|
#
|
|
# Subject to use to notify about multiple messages from one or more users in
|
|
# a room which doesn't have a name.
|
|
#messages_from_person: "[%(app)s] You have messages on %(app)s from %(person)s..."
|
|
#
|
|
# Subject to use to notify about multiple messages in a room which has a
|
|
# name.
|
|
#messages_in_room: "[%(app)s] You have messages on %(app)s in the %(room)s room..."
|
|
#
|
|
# Subject to use to notify about multiple messages in multiple rooms.
|
|
#messages_in_room_and_others: "[%(app)s] You have messages on %(app)s in the %(room)s room and others..."
|
|
#
|
|
# Subject to use to notify about multiple messages from multiple persons in
|
|
# multiple rooms. This is similar to the setting above except it's used when
|
|
# the room in which the notification was triggered has no name.
|
|
#messages_from_person_and_others: "[%(app)s] You have messages on %(app)s from %(person)s and others..."
|
|
#
|
|
# Subject to use to notify about an invite to a room which has a name.
|
|
#invite_from_person_to_room: "[%(app)s] %(person)s has invited you to join the %(room)s room on %(app)s..."
|
|
#
|
|
# Subject to use to notify about an invite to a room which doesn't have a
|
|
# name.
|
|
#invite_from_person: "[%(app)s] %(person)s has invited you to chat on %(app)s..."
|
|
|
|
# Subject for emails related to account administration.
|
|
#
|
|
# On top of the '%(app)s' placeholder, these one can use the
|
|
# '%(server_name)s' placeholder, which will be replaced by the value of the
|
|
# 'server_name' setting in your Synapse configuration.
|
|
#
|
|
# Subject to use when sending a password reset email.
|
|
#password_reset: "[%(server_name)s] Password reset"
|
|
#
|
|
# Subject to use when sending a verification email to assert an address's
|
|
# ownership.
|
|
#email_validation: "[%(server_name)s] Validate your email"
|
|
|
|
|
|
# Password providers allow homeserver administrators to integrate
|
|
# their Synapse installation with existing authentication methods
|
|
# ex. LDAP, external tokens, etc.
|
|
#
|
|
# For more information and known implementations, please see
|
|
# https://github.com/matrix-org/synapse/blob/master/docs/password_auth_providers.md
|
|
#
|
|
# Note: instances wishing to use SAML or CAS authentication should
|
|
# instead use the `saml2_config` or `cas_config` options,
|
|
# respectively.
|
|
#
|
|
password_providers:
|
|
# # Example config for an LDAP auth provider
|
|
# - module: "ldap_auth_provider.LdapAuthProvider"
|
|
# config:
|
|
# enabled: true
|
|
# uri: "ldap://ldap.example.com:389"
|
|
# start_tls: true
|
|
# base: "ou=users,dc=example,dc=com"
|
|
# attributes:
|
|
# uid: "cn"
|
|
# mail: "email"
|
|
# name: "givenName"
|
|
# #bind_dn:
|
|
# #bind_password:
|
|
# #filter: "(objectClass=posixAccount)"
|
|
|
|
|
|
|
|
## Push ##
|
|
|
|
push:
|
|
# Clients requesting push notifications can either have the body of
|
|
# the message sent in the notification poke along with other details
|
|
# like the sender, or just the event ID and room ID (`event_id_only`).
|
|
# If clients choose the former, this option controls whether the
|
|
# notification request includes the content of the event (other details
|
|
# like the sender are still included). For `event_id_only` push, it
|
|
# has no effect.
|
|
#
|
|
# For modern android devices the notification content will still appear
|
|
# because it is loaded by the app. iPhone, however will send a
|
|
# notification saying only that a message arrived and who it came from.
|
|
#
|
|
# The default value is "true" to include message details. Uncomment to only
|
|
# include the event ID and room ID in push notification payloads.
|
|
#
|
|
#include_content: false
|
|
|
|
# When a push notification is received, an unread count is also sent.
|
|
# This number can either be calculated as the number of unread messages
|
|
# for the user, or the number of *rooms* the user has unread messages in.
|
|
#
|
|
# The default value is "true", meaning push clients will see the number of
|
|
# rooms with unread messages in them. Uncomment to instead send the number
|
|
# of unread messages.
|
|
#
|
|
#group_unread_count_by_room: false
|
|
|
|
|
|
# Spam checkers are third-party modules that can block specific actions
|
|
# of local users, such as creating rooms and registering undesirable
|
|
# usernames, as well as remote users by redacting incoming events.
|
|
#
|
|
spam_checker:
|
|
#- module: "my_custom_project.SuperSpamChecker"
|
|
# config:
|
|
# example_option: 'things'
|
|
#- module: "some_other_project.BadEventStopper"
|
|
# config:
|
|
# example_stop_events_from: ['@bad:example.com']
|
|
|
|
|
|
## Rooms ##
|
|
|
|
# Controls whether locally-created rooms should be end-to-end encrypted by
|
|
# default.
|
|
#
|
|
# Possible options are "all", "invite", and "off". They are defined as:
|
|
#
|
|
# * "all": any locally-created room
|
|
# * "invite": any room created with the "private_chat" or "trusted_private_chat"
|
|
# room creation presets
|
|
# * "off": this option will take no effect
|
|
#
|
|
# The default value is "off".
|
|
#
|
|
# Note that this option will only affect rooms created after it is set. It
|
|
# will also not affect rooms created by other servers.
|
|
#
|
|
#encryption_enabled_by_default_for_room_type: invite
|
|
|
|
|
|
# Uncomment to allow non-server-admin users to create groups on this server
|
|
#
|
|
#enable_group_creation: true
|
|
|
|
# If enabled, non server admins can only create groups with local parts
|
|
# starting with this prefix
|
|
#
|
|
#group_creation_prefix: "unofficial/"
|
|
|
|
|
|
|
|
# User Directory configuration
|
|
#
|
|
# 'enabled' defines whether users can search the user directory. If
|
|
# false then empty responses are returned to all queries. Defaults to
|
|
# true.
|
|
#
|
|
# 'search_all_users' defines whether to search all users visible to your HS
|
|
# when searching the user directory, rather than limiting to users visible
|
|
# in public rooms. Defaults to false. If you set it True, you'll have to
|
|
# rebuild the user_directory search indexes, see
|
|
# https://github.com/matrix-org/synapse/blob/master/docs/user_directory.md
|
|
#
|
|
#user_directory:
|
|
# enabled: true
|
|
# search_all_users: false
|
|
|
|
|
|
# User Consent configuration
|
|
#
|
|
# for detailed instructions, see
|
|
# https://github.com/matrix-org/synapse/blob/master/docs/consent_tracking.md
|
|
#
|
|
# Parts of this section are required if enabling the 'consent' resource under
|
|
# 'listeners', in particular 'template_dir' and 'version'.
|
|
#
|
|
# 'template_dir' gives the location of the templates for the HTML forms.
|
|
# This directory should contain one subdirectory per language (eg, 'en', 'fr'),
|
|
# and each language directory should contain the policy document (named as
|
|
# '<version>.html') and a success page (success.html).
|
|
#
|
|
# 'version' specifies the 'current' version of the policy document. It defines
|
|
# the version to be served by the consent resource if there is no 'v'
|
|
# parameter.
|
|
#
|
|
# 'server_notice_content', if enabled, will send a user a "Server Notice"
|
|
# asking them to consent to the privacy policy. The 'server_notices' section
|
|
# must also be configured for this to work. Notices will *not* be sent to
|
|
# guest users unless 'send_server_notice_to_guests' is set to true.
|
|
#
|
|
# 'block_events_error', if set, will block any attempts to send events
|
|
# until the user consents to the privacy policy. The value of the setting is
|
|
# used as the text of the error.
|
|
#
|
|
# 'require_at_registration', if enabled, will add a step to the registration
|
|
# process, similar to how captcha works. Users will be required to accept the
|
|
# policy before their account is created.
|
|
#
|
|
# 'policy_name' is the display name of the policy users will see when registering
|
|
# for an account. Has no effect unless `require_at_registration` is enabled.
|
|
# Defaults to "Privacy Policy".
|
|
#
|
|
#user_consent:
|
|
# template_dir: res/templates/privacy
|
|
# version: 1.0
|
|
# server_notice_content:
|
|
# msgtype: m.text
|
|
# body: >-
|
|
# To continue using this homeserver you must review and agree to the
|
|
# terms and conditions at %(consent_uri)s
|
|
# send_server_notice_to_guests: true
|
|
# block_events_error: >-
|
|
# To continue using this homeserver you must review and agree to the
|
|
# terms and conditions at %(consent_uri)s
|
|
# require_at_registration: false
|
|
# policy_name: Privacy Policy
|
|
#
|
|
|
|
|
|
|
|
# Local statistics collection. Used in populating the room directory.
|
|
#
|
|
# 'bucket_size' controls how large each statistics timeslice is. It can
|
|
# be defined in a human readable short form -- e.g. "1d", "1y".
|
|
#
|
|
# 'retention' controls how long historical statistics will be kept for.
|
|
# It can be defined in a human readable short form -- e.g. "1d", "1y".
|
|
#
|
|
#
|
|
#stats:
|
|
# enabled: true
|
|
# bucket_size: 1d
|
|
# retention: 1y
|
|
|
|
|
|
# Server Notices room configuration
|
|
#
|
|
# Uncomment this section to enable a room which can be used to send notices
|
|
# from the server to users. It is a special room which cannot be left; notices
|
|
# come from a special "notices" user id.
|
|
#
|
|
# If you uncomment this section, you *must* define the system_mxid_localpart
|
|
# setting, which defines the id of the user which will be used to send the
|
|
# notices.
|
|
#
|
|
# It's also possible to override the room name, the display name of the
|
|
# "notices" user, and the avatar for the user.
|
|
#
|
|
#server_notices:
|
|
# system_mxid_localpart: notices
|
|
# system_mxid_display_name: "Server Notices"
|
|
# system_mxid_avatar_url: "mxc://server.com/oumMVlgDnLYFaPVkExemNVVZ"
|
|
# room_name: "Server Notices"
|
|
|
|
|
|
|
|
# Uncomment to disable searching the public room list. When disabled
|
|
# blocks searching local and remote room lists for local and remote
|
|
# users by always returning an empty list for all queries.
|
|
#
|
|
#enable_room_list_search: false
|
|
|
|
# The `alias_creation` option controls who's allowed to create aliases
|
|
# on this server.
|
|
#
|
|
# The format of this option is a list of rules that contain globs that
|
|
# match against user_id, room_id and the new alias (fully qualified with
|
|
# server name). The action in the first rule that matches is taken,
|
|
# which can currently either be "allow" or "deny".
|
|
#
|
|
# Missing user_id/room_id/alias fields default to "*".
|
|
#
|
|
# If no rules match the request is denied. An empty list means no one
|
|
# can create aliases.
|
|
#
|
|
# Options for the rules include:
|
|
#
|
|
# user_id: Matches against the creator of the alias
|
|
# alias: Matches against the alias being created
|
|
# room_id: Matches against the room ID the alias is being pointed at
|
|
# action: Whether to "allow" or "deny" the request if the rule matches
|
|
#
|
|
# The default is:
|
|
#
|
|
#alias_creation_rules:
|
|
# - user_id: "*"
|
|
# alias: "*"
|
|
# room_id: "*"
|
|
# action: allow
|
|
|
|
# The `room_list_publication_rules` option controls who can publish and
|
|
# which rooms can be published in the public room list.
|
|
#
|
|
# The format of this option is the same as that for
|
|
# `alias_creation_rules`.
|
|
#
|
|
# If the room has one or more aliases associated with it, only one of
|
|
# the aliases needs to match the alias rule. If there are no aliases
|
|
# then only rules with `alias: *` match.
|
|
#
|
|
# If no rules match the request is denied. An empty list means no one
|
|
# can publish rooms.
|
|
#
|
|
# Options for the rules include:
|
|
#
|
|
# user_id: Matches against the creator of the alias
|
|
# room_id: Matches against the room ID being published
|
|
# alias: Matches against any current local or canonical aliases
|
|
# associated with the room
|
|
# action: Whether to "allow" or "deny" the request if the rule matches
|
|
#
|
|
# The default is:
|
|
#
|
|
#room_list_publication_rules:
|
|
# - user_id: "*"
|
|
# alias: "*"
|
|
# room_id: "*"
|
|
# action: allow
|
|
|
|
|
|
# Server admins can define a Python module that implements extra rules for
|
|
# allowing or denying incoming events. In order to work, this module needs to
|
|
# override the methods defined in synapse/events/third_party_rules.py.
|
|
#
|
|
# This feature is designed to be used in closed federations only, where each
|
|
# participating server enforces the same rules.
|
|
#
|
|
#third_party_event_rules:
|
|
# module: "my_custom_project.SuperRulesSet"
|
|
# config:
|
|
# example_option: 'things'
|
|
|
|
|
|
## Opentracing ##
|
|
|
|
# These settings enable opentracing, which implements distributed tracing.
|
|
# This allows you to observe the causal chains of events across servers
|
|
# including requests, key lookups etc., across any server running
|
|
# synapse or any other other services which supports opentracing
|
|
# (specifically those implemented with Jaeger).
|
|
#
|
|
opentracing:
|
|
# tracing is disabled by default. Uncomment the following line to enable it.
|
|
#
|
|
#enabled: true
|
|
|
|
# The list of homeservers we wish to send and receive span contexts and span baggage.
|
|
# See docs/opentracing.rst
|
|
# This is a list of regexes which are matched against the server_name of the
|
|
# homeserver.
|
|
#
|
|
# By default, it is empty, so no servers are matched.
|
|
#
|
|
#homeserver_whitelist:
|
|
# - ".*"
|
|
|
|
# Jaeger can be configured to sample traces at different rates.
|
|
# All configuration options provided by Jaeger can be set here.
|
|
# Jaeger's configuration mostly related to trace sampling which
|
|
# is documented here:
|
|
# https://www.jaegertracing.io/docs/1.13/sampling/.
|
|
#
|
|
#jaeger_config:
|
|
# sampler:
|
|
# type: const
|
|
# param: 1
|
|
|
|
# Logging whether spans were started and reported
|
|
#
|
|
# logging:
|
|
# false
|
|
|
|
|
|
## Workers ##
|
|
|
|
# Disables sending of outbound federation transactions on the main process.
|
|
# Uncomment if using a federation sender worker.
|
|
#
|
|
#send_federation: false
|
|
|
|
# It is possible to run multiple federation sender workers, in which case the
|
|
# work is balanced across them.
|
|
#
|
|
# This configuration must be shared between all federation sender workers, and if
|
|
# changed all federation sender workers must be stopped at the same time and then
|
|
# started, to ensure that all instances are running with the same config (otherwise
|
|
# events may be dropped).
|
|
#
|
|
#federation_sender_instances:
|
|
# - federation_sender1
|
|
|
|
# When using workers this should be a map from `worker_name` to the
|
|
# HTTP replication listener of the worker, if configured.
|
|
#
|
|
#instance_map:
|
|
# worker1:
|
|
# host: localhost
|
|
# port: 8034
|
|
|
|
# Experimental: When using workers you can define which workers should
|
|
# handle event persistence and typing notifications. Any worker
|
|
# specified here must also be in the `instance_map`.
|
|
#
|
|
#stream_writers:
|
|
# events: worker1
|
|
# typing: worker1
|
|
|
|
# The worker that is used to run background tasks (e.g. cleaning up expired
|
|
# data). If not provided this defaults to the main process.
|
|
#
|
|
#run_background_tasks_on: worker1
|
|
|
|
# A shared secret used by the replication APIs to authenticate HTTP requests
|
|
# from workers.
|
|
#
|
|
# By default this is unused and traffic is not authenticated.
|
|
#
|
|
#worker_replication_secret: ""
|
|
|
|
|
|
# Configuration for Redis when using workers. This *must* be enabled when
|
|
# using workers (unless using old style direct TCP configuration).
|
|
#
|
|
redis:
|
|
# Uncomment the below to enable Redis support.
|
|
#
|
|
#enabled: true
|
|
|
|
# Optional host and port to use to connect to redis. Defaults to
|
|
# localhost and 6379
|
|
#
|
|
#host: localhost
|
|
#port: 6379
|
|
|
|
# Optional password if configured on the Redis instance
|
|
#
|
|
#password: <secret_password>
|