Commit Graph

415 Commits

Author SHA1 Message Date
Erik Johnston
df4b1e9c74
Pass room_id to get_auth_chain_difference (#8879)
This is so that we can choose which algorithm to use based on the room ID.
2020-12-04 15:52:49 +00:00
Richard van der Hoff
90cf1eec44 Remove redundant mocking 2020-12-02 17:53:38 +00:00
Patrick Cloke
30fba62108
Apply an IP range blacklist to push and key revocation requests. (#8821)
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:

* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events

The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
2020-12-02 11:09:24 -05:00
Erik Johnston
c5b6abd53d
Correctly handle unpersisted events when calculating auth chain difference. (#8827)
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:

1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
2020-12-02 15:22:37 +00:00
Dirk Klimpel
3f0ff53158
Remove deprecated /_matrix/client/*/admin endpoints (#8785)
These are now only available via `/_synapse/admin/v1`.
2020-11-25 16:26:11 -05:00
Richard van der Hoff
deff8f628d
Merge pull request #8761 from matrix-org/rav/test_request_rendering
Make `make_request` actually render the request
2020-11-17 15:17:04 +00:00
Erik Johnston
f737368a26
Add admin API for logging in as a user (#8617) 2020-11-17 10:51:25 +00:00
Richard van der Hoff
be8fa65d0b Remove redundant calls to render() 2020-11-16 18:24:08 +00:00
Richard van der Hoff
c3e3552ec4 fixup test 2020-11-16 15:51:47 +00:00
Richard van der Hoff
ebc405446e
Add a custom_headers param to make_request (#8760)
Some tests want to set some custom HTTP request headers, so provide a way to do
that before calling requestReceived().
2020-11-16 14:45:22 +00:00
Erik Johnston
f21e24ffc2
Add ability for access tokens to belong to one user but grant access to another user. (#8616)
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).

A future PR will add an API for creating such a token.

When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
2020-10-29 15:58:44 +00:00
Dan Callahan
aff1eb7c67
Tell Black to format code for Python 3.5 (#8664)
This allows trailing commas in multi-line arg lists.

Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.

Signed-off-by: Dan Callahan <danc@element.io>
2020-10-27 23:26:36 +00:00
Will Hunt
e8dbbcb64c
Fix get|set_type_stream_id_for_appservice store functions (#8648) 2020-10-26 10:51:33 -04:00
Erik Johnston
2ac908f377
Don't instansiate Requester directly (#8614) 2020-10-22 10:11:06 +01:00
Richard van der Hoff
7b71695388 Combine the two sets of tests for CacheDescriptor 2020-10-21 15:38:29 +01:00
Will Hunt
c276bd9969
Send some ephemeral events to appservices (#8437)
Optionally sends typing, presence, and read receipt information to appservices.
2020-10-15 12:33:28 -04:00
Richard van der Hoff
0a08cd1065
Merge pull request #8548 from matrix-org/rav/deferred_cache
Rename Cache to DeferredCache, and related changes
2020-10-15 11:42:07 +01:00
Richard van der Hoff
470dedd266 Combine the two sets of DeferredCache tests 2020-10-14 23:49:27 +01:00
Richard van der Hoff
4182bb812f move DeferredCache into its own module 2020-10-14 23:38:14 +01:00
Richard van der Hoff
9f87da0a84 Rename Cache->DeferredCache 2020-10-14 23:38:14 +01:00
Richard van der Hoff
a34b17e492 Simplify _locally_reject_invite
Update `EventCreationHandler.create_event` to accept an auth_events param, and
use it in `_locally_reject_invite` instead of reinventing the wheel.
2020-10-13 23:58:48 +01:00
Erik Johnston
8de3703d21
Make event persisters periodically announce position over replication. (#8499)
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.

This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
2020-10-12 15:51:41 +01:00
Erik Johnston
ae5b2a72c0
Reduce serialization errors in MultiWriterIdGen (#8456)
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
2020-10-07 15:15:57 +01:00
Erik Johnston
e3debf9682
Add logging on startup/shutdown (#8448)
This is so we can tell what is going on when things are taking a while to start up.

The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
2020-10-02 15:20:45 +01:00
Erik Johnston
7941372ec8
Make token serializing/deserializing async (#8427)
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
2020-09-30 20:29:19 +01:00
Richard van der Hoff
6d2d42f8fb Rewrite BucketCollector
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.

I've replaced it with something that is hopefully a bit easier to use.

(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
2020-09-30 16:49:15 +01:00
Erik Johnston
ea70f1c362
Various clean ups to room stream tokens. (#8423) 2020-09-29 21:48:33 +01:00
Erik Johnston
b1433bf231
Don't table scan events on worker startup (#8419)
* Fix table scan of events on worker startup.

This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.

Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.

* Consider old writers coming back as "new".

Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.

Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>

Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
2020-09-29 16:42:19 +01:00
Will Hunt
8676d8ab2e
Filter out appservices from mau count (#8404)
This is an attempt to fix #8403.
2020-09-29 13:11:02 +01:00
Erik Johnston
bd380d942f
Add checks for postgres sequence consistency (#8402) 2020-09-28 18:00:30 +01:00
Erik Johnston
f112cfe5bb
Fix MultiWriteIdGenerator's handling of restarts. (#8374)
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.

We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
2020-09-24 16:53:51 +01:00
Erik Johnston
cbabb312e0
Use async with for ID gens (#8383)
This will allow us to hit the DB after we've finished using the generated stream ID.
2020-09-23 16:11:18 +01:00
Patrick Cloke
8a4a4186de
Simplify super() calls to Python 3 syntax. (#8344)
This converts calls like super(Foo, self) -> super().

Generated with:

    sed -i "" -Ee 's/super\([^\(]+\)/super()/g' **/*.py
2020-09-18 09:56:44 -04:00
Erik Johnston
deedb91732
Fix MultiWriterIdGenerator.current_position. (#8257)
It did not correctly handle IDs finishing being persisted out of
order, resulting in the `current_position` lagging until new IDs are
persisted.
2020-09-08 14:26:54 +01:00
Patrick Cloke
cef00211c8
Allow for make_awaitable's return value to be re-used. (#8261) 2020-09-08 07:26:55 -04:00
Patrick Cloke
c619253db8
Stop sub-classing object (#8249) 2020-09-04 06:54:56 -04:00
Brendan Abolivier
5a1dd297c3
Re-implement unread counts (again) (#8059) 2020-09-02 17:19:37 +01:00
Erik Johnston
bbb3c8641c
Make MultiWriterIDGenerator work for streams that use negative stream IDs (#8203)
This is so that we can use it for the backfill events stream.
2020-09-01 13:36:25 +01:00
Richard van der Hoff
45e8f7726f
Rename get_e2e_device_keys to better reflect its purpose (#8205)
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.

`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.

Add some typing too.
2020-08-29 00:14:17 +01:00
Patrick Cloke
e00816ad98
Do not yield on awaitables in tests. (#8193) 2020-08-27 17:24:46 -04:00
Patrick Cloke
b49a5b9307
Convert stats and related calls to async/await (#8192) 2020-08-27 17:24:37 -04:00
Patrick Cloke
b71d4a094c
Convert simple_delete to async/await. (#8191) 2020-08-27 14:16:41 -04:00
Erik Johnston
5649b7f3d0
Fix missing _add_persisted_position (#8179)
This was forgotten in #8164.
2020-08-27 13:20:34 +01:00
Patrick Cloke
30426c7063
Convert additional database methods to async (select list, search, insert_many, delete_*) (#8168) 2020-08-27 07:41:01 -04:00
Patrick Cloke
4a739c73b4
Convert simple_update* and simple_select* to async (#8173) 2020-08-27 07:08:38 -04:00
Andrew Morgan
a466b67972
Reduce run-times of tests by advancing the reactor less (#7757) 2020-08-27 11:39:53 +01:00
Patrick Cloke
4c6c56dc58
Convert simple_select_one and simple_select_one_onecol to async (#8162) 2020-08-26 07:19:32 -04:00
Erik Johnston
eba98fb024
Add functions to MultiWriterIdGen used by events stream (#8164) 2020-08-25 17:32:30 +01:00
Brendan Abolivier
3f49f74610
Don't fail /submit_token requests on incorrect session ID if request_token_inhibit_3pid_errors is turned on (#7991)
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set

* Changelog

* Also wait some time before responding to /requestToken

* Incorporate review

* Update synapse/storage/databases/main/registration.py

Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>

* Incorporate review

Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
2020-08-24 11:33:55 +01:00
Patrick Cloke
f594e434c3
Switch the JSON byte producer from a pull to a push producer. (#8116) 2020-08-19 08:07:57 -04:00