As it gets used in sliding sync.
We basically invalidate it in all the same places as
`get_rooms_for_user`. Most of the changes are due to needing the
arguments you pass in to be hashable (which lists aren't)
`bump_stamp` corresponds to the `stream_ordering` of the latest `DEFAULT_BUMP_EVENT_TYPES` in the room. This helps clients sort more readily without them needing to pull in a bunch of the timeline to determine the last activity. `bump_event_types` is a thing because for example, we don't want display name changes to mark the room as unread and bump it to the top. For encrypted rooms, we just have to consider any activity as a bump because we can't see the content and the client has to figure it out for themselves.
Outside of Synapse, `bump_stamp` is just a free-form counter so other implementations could use `received_ts`or `origin_server_ts` (see the [*Security considerations* section in MSC3575 about the potential pitfalls of using `origin_server_ts`](https://github.com/matrix-org/matrix-spec-proposals/blob/kegan/sync-v3/proposals/3575-sync.md#security-considerations)). It doesn't have any guarantee about always going up. In the Synapse case, it could go down if an event was redacted/removed (or purged in cases of retention policies).
In the future, we could add `bump_event_types` as [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575) mentions if people need to customize the event types.
---
In the Sliding Sync proxy, a similar [`timestamp` field was added](https://github.com/matrix-org/sliding-sync/pull/247) for the same purpose but the name is not obvious what it pertains to or what it's for.
The `timestamp` field was also added to Ruma in https://github.com/ruma/ruma/pull/1622
Based on [MSC3575](https://github.com/matrix-org/matrix-spec-proposals/pull/3575): Sliding Sync
This iteration only focuses on returning the list of room IDs in the sliding window API (without sorting/filtering).
Rooms appear in the Sliding sync response based on:
- `invite`, `join`, `knock`, `ban` membership events
- Kicks (`leave` membership events where `sender` is different from the `user_id`/`state_key`)
- `newly_left` (rooms that were left during the given token range, > `from_token` and <= `to_token`)
- In order for bans/kicks to not show up, you need to `/forget` those rooms. This doesn't modify the event itself though and only adds the `forgotten` flag to `room_memberships` in Synapse. There isn't a way to tell when a room was forgotten at the moment so we can't factor it into the from/to range.
### Example request
`POST http://localhost:8008/_matrix/client/unstable/org.matrix.msc3575/sync`
```json
{
"lists": {
"foo-list": {
"ranges": [ [0, 99] ],
"sort": [ "by_notification_level", "by_recency", "by_name" ],
"required_state": [
["m.room.join_rules", ""],
["m.room.history_visibility", ""],
["m.space.child", "*"]
],
"timeline_limit": 100
}
}
}
```
Response:
```json
{
"next_pos": "s58_224_0_13_10_1_1_16_0_1",
"lists": {
"foo-list": {
"count": 1,
"ops": [
{
"op": "SYNC",
"range": [0, 99],
"room_ids": [
"!MmgikIyFzsuvtnbvVG:my.synapse.linux.server"
]
}
]
}
},
"rooms": {},
"extensions": {}
}
```
During the migration the automated script to update the copyright
headers accidentally got rid of some of the existing copyright lines.
Reinstate them.
MSC3952 defines push rules which searches for mentions in a list of
Matrix IDs in the event body, instead of searching the entire event
body for display name / local part.
This is implemented behind an experimental configuration flag and
does not yet implement the backwards compatibility pieces of the MSC.
A batch of changes intended to make it easier to trace to-device messages through the system.
The intention here is that a client can set a property org.matrix.msgid in any to-device message it sends. That ID is then included in any tracing or logging related to the message. (Suggestions as to where this field should be documented welcome. I'm not enthusiastic about speccing it - it's very much an optional extra to help with debugging.)
I've also generally improved the data we send to opentracing for these messages.
When retrieving counts of notifications segment the results based on the
thread ID, but choose whether to return them as individual threads or as
a single summed field by letting the client opt-in via a sync flag.
The summarization code is also updated to be per thread, instead of per
room.
This adds support for the stable identifiers of MSC2285 while
continuing to support the unstable identifiers behind the configuration
flag. These will be removed in a future version.
* Update worker docs to remove group endpoints.
* Removes an unused parameter to `ApplicationService`.
* Break dependency between media repo and groups.
* Avoid copying `m.room.related_groups` state events during room upgrades.
Makes it so that groups/communities no longer exist from a user-POV. E.g. we remove:
* All API endpoints (including Client-Server, Server-Server, and admin).
* Documented configuration options (and the experimental flag, which is now unused).
* Special handling during room upgrades.
* The `groups` section of the `/sync` response.
* Changes hidden read receipts to be a separate receipt type
(instead of a field on `m.read`).
* Updates the `/receipts` endpoint to accept `m.fully_read`.
The unstable identifiers are still supported if the experimental configuration
flag is enabled. The unstable identifiers will be removed in a future release.
This change makes mypy complain if the constants are ever reassigned,
and, more usefully, makes mypy type them as `Literal`s instead of `str`s,
allowing code of the following form to pass mypy:
```py
def do_something(membership: Literal["join", "leave"], ...): ...
do_something(Membership.JOIN, ...)
```
This fixes a "Event not signed by authorising server" error when
transition room member from join -> join, e.g. when updating a
display name or avatar URL for restricted rooms.
This is part of my ongoing war against BaseHandler. I've moved kick_guest_users into RoomMemberHandler (since it calls out to that handler anyway), and split maybe_kick_guest_users into the two places it is called.
* Make historical messages available to federated servers
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
Follow-up to https://github.com/matrix-org/synapse/pull/9247
* Debug message not available on federation
* Add base starting insertion point when no chunk ID is provided
* Fix messages from multiple senders in historical chunk
Follow-up to https://github.com/matrix-org/synapse/pull/9247
Part of MSC2716: https://github.com/matrix-org/matrix-doc/pull/2716
---
Previously, Synapse would throw a 403,
`Cannot force another user to join.`,
because we were trying to use `?user_id` from a single virtual user
which did not match with messages from other users in the chunk.
* Remove debug lines
* Messing with selecting insertion event extremeties
* Move db schema change to new version
* Add more better comments
* Make a fake requester with just what we need
See https://github.com/matrix-org/synapse/pull/10276#discussion_r660999080
* Store insertion events in table
* Make base insertion event float off on its own
See https://github.com/matrix-org/synapse/pull/10250#issuecomment-875711889
Conflicts:
synapse/rest/client/v1/room.py
* Validate that the app service can actually control the given user
See https://github.com/matrix-org/synapse/pull/10276#issuecomment-876316455
Conflicts:
synapse/rest/client/v1/room.py
* Add some better comments on what we're trying to check for
* Continue debugging
* Share validation logic
* Add inserted historical messages to /backfill response
* Remove debug sql queries
* Some marker event implemntation trials
* Clean up PR
* Rename insertion_event_id to just event_id
* Add some better sql comments
* More accurate description
* Add changelog
* Make it clear what MSC the change is part of
* Add more detail on which insertion event came through
* Address review and improve sql queries
* Only use event_id as unique constraint
* Fix test case where insertion event is already in the normal DAG
* Remove debug changes
* Switch to chunk events so we can auth via power_levels
Previously, we were using `content.chunk_id` to connect one
chunk to another. But these events can be from any `sender`
and we can't tell who should be able to send historical events.
We know we only want the application service to do it but these
events have the sender of a real historical message, not the
application service user ID as the sender. Other federated homeservers
also have no indicator which senders are an application service on
the originating homeserver.
So we want to auth all of the MSC2716 events via power_levels
and have them be sent by the application service with proper
PL levels in the room.
* Switch to chunk events for federation
* Add unstable room version to support new historical PL
* Fix federated events being rejected for no state_groups
Add fix from https://github.com/matrix-org/synapse/pull/10439
until it merges.
* Only connect base insertion event to prev_event_ids
Per discussion with @erikjohnston,
https://matrix.to/#/!UytJQHLQYfvYWsGrGY:jki.re/$12bTUiObDFdHLAYtT7E-BvYRp3k_xv8w0dUQHibasJk?via=jki.re&via=matrix.org
* Make it possible to get the room_version with txn
* Allow but ignore historical events in unsupported room version
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675592489
We can't reject historical events on unsupported room versions because homeservers without knowledge of MSC2716 or the new room version don't reject historical events either.
Since we can't rely on the auth check here to stop historical events on unsupported room versions, I've added some additional checks in the processing/persisting code (`synapse/storage/databases/main/events.py` -> `_handle_insertion_event` and `_handle_chunk_event`). I've had to do some refactoring so there is method to fetch the room version by `txn`.
* Move to unique index syntax
See https://github.com/matrix-org/synapse/pull/10245#discussion_r675638509
* High-level document how the insertion->chunk lookup works
* Remove create_event fallback for room_versions
See https://github.com/matrix-org/synapse/pull/10245/files#r677641879
* Use updated method name
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAmEBUJUQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCWi6CACfA3B7rXfQIO893mctSZkNhtAG/e4o310M
etvjAtovKmKeFqBvm89FPmFoXvGA2ypoz7Jz2fdkP56DNKIXvihnDc8EeQ3gGawf
hQ8GBjICOL1e7R/4qzuOCWYdppBGoGNAbz7qyxAUxZ/XOzsPJ2VBGkgyXWZkyPe/
nJYsuMuMp117HUwTqPqs3oZuTN0MRTy6xgaDfbFbcX9UC/amLmGIWOhlme8iV15r
HQAW0X7F2Un5h7eQwogWTDb9gBHKnJ4ApaSJLfZl9E72i0Sv7o9UFcLIdy2DRVSq
gxlRBVzVU6ZndCQ4vQXFSjQ20VGNXc2vpKVRE1D6YXxmxVNbBQB4
=lb6H
-----END PGP SIGNATURE-----
Merge tag 'v1.39.0rc3' into develop
Synapse 1.39.0rc3 (2021-07-28)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.38 which caused an exception at startup when SAML authentication was enabled. ([\#10477](https://github.com/matrix-org/synapse/issues/10477))
- Fix a long-standing bug where Synapse would not inform clients that a device had exhausted its one-time-key pool, potentially causing problems decrypting events. ([\#10485](https://github.com/matrix-org/synapse/issues/10485))
- Fix reporting old R30 stats as R30v2 stats. Introduced in v1.39.0rc1. ([\#10486](https://github.com/matrix-org/synapse/issues/10486))
Internal Changes
----------------
- Fix an error which prevented the Github Actions workflow to build the docker images from running. ([\#10461](https://github.com/matrix-org/synapse/issues/10461))
- Fix release script to correctly version debian changelog when doing RCs. ([\#10465](https://github.com/matrix-org/synapse/issues/10465))
