This adds a module API which allows a module to update a user's
presence state/status message. This is useful for controlling presence
from an external system.
To fully control presence from the module the presence.enabled config
parameter gains a new state of "untracked" which disables internal tracking
of presence changes via user actions, etc. Only updates from the module will
be persisted and sent down sync properly).
This splits thinsg into two queries, but most of the time we won't have
new event backwards extremities so this shouldn't actually add an extra
RTT for the majority of cases.
Note this removes the check for events with no prev events, but that was
part of MSC2716 work that has since been removed.
Synapse was incorrectly implemented with a knock_state_events
property on some APIs (instead of knock_room_state). This was
correct in Synapse 1.70.0, but *both* fields were sent to also be
compatible with Synapse versions expecting the wrong field.
Enough time has passed that only the correct field needs to be
included/handled.
Co-authored-by: David Robertson <davidr@element.io>
Co-authored-by: Patrick Cloke <patrickc@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
Assert that the return type of callables wrapped in @cached
and @cachedList are cachable (aka immutable).
Also add restore of purge/shutdown rooms after a synapse restart.
Co-authored-by: Eric Eastwood <erice@matrix.org>
Co-authored-by: Erik Johnston <erikj@matrix.org>
Refresh tokens were not correctly moved to the rehydrated
device (similar to how the access token is currently handled).
This resulted in invalid refresh tokens after rehydration.
Adds both the List-Unsubscribe (RFC2369) and List-Unsubscribe-Post (RFC8058)
headers to push notification emails, which together should:
* Show an "Unsubscribe" link in the MUA UI when viewing Synapse notification emails.
* Enable "one-click" unsubscribe (the user never leaves their MUA, which automatically
makes a POST request to the specified endpoint).
* Allow user_id to be optional for room deletion
* Add module API method to delete a room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Don't worry about the case block=True && requester_user_id is None
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Add a (long) timeout to when a "busy" device is considered not online.
This does *not* match MSC3026, but is a reasonable thing for an
implementation to do.
Expands tests for the (unstable) busy presence with multiple devices.
Tracks presence on an individual per-device basis and combine
the per-device state into a per-user state. This should help in
situations where a user has multiple devices with conflicting status
(e.g. one is syncing with unavailable and one is syncing with online).
The tie-breaking is done by priority:
BUSY > ONLINE > UNAVAILABLE > OFFLINE
Refactoring to use both the user ID & the device ID when tracking
the currently syncing users in the presence handler.
This is done both locally and over replication. Note that the device
ID is discarded but will be used in a future change.
Refactoring to pass the device ID (in addition to the user ID) through
the presence handler (specifically the `user_syncing`, `set_state`,
and `bump_presence_active_time` methods and their replication
versions).
Simplify some of the presence code by reducing duplicated code between
worker & non-worker modes.
The main change is to push some of the logic from `user_syncing` into
`set_state`. This is done by passing whether the user is setting the presence
via a `/sync` with a new `is_sync` flag to `set_state`. If this is `true` some
additional logic is performed:
* Don't override `busy` presence.
* Update the `last_user_sync_ts`.
* Never update the status message.
Misc. clean-ups to:
* Use keyword arguments.
* Return early (reducing indentation) of some functions.
* Removing duplicated / unused code.
* Use wrap_as_background_process.
For now this maintains compatible with old Synapses by falling back
to using transaction semantics on a per-access token. A future version
of Synapse will drop support for this.
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <89468146+nico-famedly@users.noreply.github.com>
Co-authored-by: Hubert Chathi <hubert@uhoreg.ca>
And fix a bug in the implementation of the updated redaction
format (MSC2174) where the top-level redacts field was not
properly added for backwards-compatibility.
**Before:**
```
Error retrieving alias
```
**After:**
```
Error retrieving alias #foo:bar -> 401 Unauthorized
```
*Spawning from creating the [manual testing strategy for the outbound federation proxy](https://github.com/matrix-org/synapse/pull/15773).*
We now only block the client to backfill when we see a large gap in the events (more than 2 events missing in a row according to `depth`), more than 3 single-event holes, or not enough messages to fill the response. Otherwise, we return the messages directly to the client and backfill in the background for eventual consistency sake.
Fix https://github.com/matrix-org/synapse/issues/15696
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
This moves the deactivated user check to the method which
all login types call.
Additionally updates the application service tests to be more
realistic by removing invalid tests and fixing server names.
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
m.push_rules, like m.fully_read, is a special account data type that cannot
be set using the normal /account_data endpoint. Return an error instead
of allowing data that will not be used to be stored.
MSC3984 proxies /keys/query requests to appservices, but servers will
can also requests devices / keys from the /user/devices endpoint.
The formats are close enough that we can "proxy" that /user/devices to
appservices (by calling /keys/query) and then change the format of the
returned data before returning it over federation.
Behind a configuration flag this adds + to the list of allowed
characters in Matrix IDs. The main feature this enables is
using full E.164 phone numbers as Matrix IDs.
Add an `is_mine_server_name` method, similar to `is_mine_id`.
Ideally we would use this consistently, instead of sometimes comparing
against `hs.hostname` and other times reaching into
`hs.config.server.server_name`.
Also fix a bug in the tests where `hs.hostname` would sometimes differ
from `hs.config.server.server_name`.
Signed-off-by: Sean Quah <seanq@matrix.org>
A dont_notify action is a no-op (and coalesce is undefined). These are
both considered no-ops by the spec, per MSC3987 and the predefined
push rules were updated to remove dont_notify from the list of actions.
Adds an optional keyword argument to the /relations API which
will recurse a limited number of event relationships.
This will cause the API to return not just the events related to the
parent event, but also events related to those related to the parent
event, etc.
This is disabled by default behind an experimental configuration
flag and is currently implemented using prefixed parameters.
MSC3983 provides a way to request multiple OTKs at once from appservices,
this extends this concept to the Client-Server API.
Note that this will likely be spit out into a separate MSC, but is currently part of
MSC3983.
It can be useful to always return the fallback key when attempting to
claim keys. This adds an unstable endpoint for `/keys/claim` which
always returns fallback keys in addition to one-time-keys.
The fallback key(s) are not marked as "used" unless there are no
corresponding OTKs.
This is currently defined in MSC3983 (although likely to be split out
to a separate MSC). The endpoint shape may change or be requested
differently (i.e. a keyword parameter on the current endpoint), but the
core logic should be reasonable.
This change fixes a rare bug where initial /syncs would fail with a
`KeyError` under the following circumstances:
1. A user fast joins a remote room.
2. The user is kicked from the room before the room's full state has
been synced.
3. A second local user fast joins the room.
4. Events are backfilled into the room with a higher topological
ordering than the original user's leave. They are assigned a
negative stream ordering. It's not clear how backfill happened here,
since it is expected to be equivalent to syncing the full state.
5. The second local user leaves the room before the room's full state
has been synced. The homeserver does not complete the sync.
6. The original user performs an initial /sync with lazy_load_members
enabled.
* Because they were kicked from the room, the room is included in
the /sync response even though the include_leave option is not
specified.
* To populate the room's timeline, `_load_filtered_recents` /
`get_recent_events_for_room` fetches events with a lower stream
ordering than the leave event and picks the ones with the highest
topological orderings (which are most recent). This captures the
backfilled events after the leave, since they have a negative
stream ordering. These events are filtered out of the timeline,
since the user was not in the room at the time and cannot view
them. The sync code ends up with an empty timeline for the room
that notably does not include the user's leave event.
This seems buggy, but at least we don't disclose events the user
isn't allowed to see.
* Normally, `compute_state_delta` would fetch the state at the
start and end of the room's timeline to generate the sync
response. Since the timeline is empty, it fetches the state at
`min(now, last event in the room)`, which corresponds with the
second user's leave. The state during the entirety of the second
user's membership does not include the membership for the first
user because of partial state.
This part is also questionable, since we are fetching state from
outside the bounds of the user's membership.
* `compute_state_delta` then tries and fails to find the user's
membership in the auth events of timeline events. Because there
is no timeline event whose auth events are expected to contain
the user's membership, a `KeyError` is raised.
Also contains a drive-by fix for a separate unlikely race condition.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Revert "Fix registering a device on an account with lots of devices (#15348)"
This reverts commit f0d8f66eaa.
* Revert "Delete stale non-e2e devices for users, take 3 (#15183)"
This reverts commit 78cdb72cd6.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for devices in addition
to any information stored in the Synapse database.
Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
* Fix joining rooms you have been unbanned from
Since forever synapse did not allow you to join a room after you have
been unbanned from it over federation. This was not actually because of
the unban event not federating. Synapse simply used outdated state to
validate the join transition. This skips the validation if we are not in
the room and for that reason won't have the current room state.
Fixes#1563
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Update changelog.d/15323.bugfix
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Experimental support for MSC3983 is behind a configuration flag.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for one-time keys *if*
there are none uploaded to Synapse.
This makes it so that we rely on the `device_id` to delete pushers on logout,
instead of relying on the `access_token_id`. This ensures we're not removing
pushers on token refresh, and prepares for a world without access token IDs
(also known as the OIDC).
This actually runs the `set_device_id_for_pushers` background update, which
was forgotten in #13831.
Note that for backwards compatibility it still deletes pushers based on the
`access_token` until the background update finishes.
When a room is deleted in Synapse we remove the event forward
extremities in the room, so if (say a bot) tries to send a message into
the room we error out due to not being able to calculate prev events for
the new event *before* we check if the sender is in the room.
Fixes#8094
* Scaffolding for background process to refresh profiles
* Add scaffolding for background process to refresh profiles for a given server
* Implement the code to select servers to refresh from
* Ensure we don't build up multiple looping calls
* Make `get_profile` able to respect backoffs
* Add logic for refreshing users
* When backing off, schedule a refresh when the backoff is over
* Wake up the background processes when we receive an interesting state event
* Add tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comment about 1<<62
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Remove special-case method for new memberships only, use more generic method
* Only collect profiles from state events in public rooms
* Add a table to track stale remote user profiles
* Add store methods to set and delete rows in this new table
* Mark remote profiles as stale when a member state event comes in to a private room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Simplify by removing Optionality of `event_id`
* Replace names and avatars with None if they're set to dodgy things
I think this makes more sense anyway.
* Move schema delta to 74 (I missed the boat?)
* Turns out these can be None after all
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
It is not necessary to reach out to the database to check some
parameters if the auto-join rooms are not configured, or (in some cases)
if auto-create rooms is not configured.
* Tweak docstring and type hint
* Flip logic and provide better name
* Separate decision from action
* Track a set of strings, not EventBases
* Require explicit boolean options from callers
* Add explicit option for partial state rooms
* Changelog
* Rename param
When pushing events in partial state rooms down incremental /sync, we
try to find the `m.room.member` state event for their senders by digging
through their auth events, so that we can present the membership to the
client. Events usually have a membership event in their auth events,
with the exception of the `m.room.create` event and a user's first join
into the room.
When implementing #13477, we took the case of a user's first join into
account, but forgot to handle the `m.room.create` case. This change
fixes that.
Signed-off-by: Sean Quah <seanq@matrix.org>
It turns out that no clients rely on server-side aggregation of `m.annotation`
relationships: it's just not very useful as currently implemented.
It's also non-trivial to calculate.
I want to remove it from MSC2677, so to keep the implementation in line, let's
remove it here.
* Change `create_room` return type
* Don't return room alias from /createRoom
* Update other callsites
* Fix up mypy complaints
It looks like new_room_user_id is None iff new_room_id is None. It's a
shame we haven't expressed this in a way that mypy can understand.
* Changelog
Previously, when creating a join event in /make_join, we would decide
whether to include additional fields to satisfy restricted room checks
based on the current state of the room. Then, when building the event,
we would capture the forward extremities of the room to use as prev
events.
This is subject to race conditions. For example, when leaving and
rejoining a room, the following sequence of events leads to a misleading
403 response:
1. /make_join reads the current state of the room and sees that the user
is still in the room. It decides to omit the field required for
restricted room joins.
2. The leave event is persisted and the room's forward extremities are
updated.
3. /make_join builds the event, using the post-leave forward extremities.
The event then fails the restricted room checks.
To mitigate the race, we move the read of the forward extremities closer
to the read of the current state. Ideally, we would compute the state
based off the chosen prev events, but that can involve state resolution,
which is expensive.
Signed-off-by: Sean Quah <seanq@matrix.org>
