This should help ensure that equivalent results are achieved between
homeservers querying for the summary of a space.
This implements modified MSC1772 rules, according to MSC2946.
The different is that the origin_server_ts of the m.room.create event
is not used as a tie-breaker since this might not be known if the
homeserver is not part of the room.
Per changes in MSC2946, the C-S and S-S APIs for spaces summary
should use GET requests.
Until this is stable, the POST endpoints still exist.
This does not switch federation requests to use the GET version yet
since it is newly added and already deployed servers might not support
it. When switching to the stable endpoint we should switch to GET
requests.
MSC1772 specifies the m.room.create event should be sent as part
of the invite_state. This was done optionally behind an experimental
flag, but is now done by default due to MSC1772 being approved.
Now that cross signing exists there is much less of a need for other people to look at devices and verify them individually. This PR adds a config option to allow you to prevent device display names from being shared with other servers.
Signed-off-by: Aaron Raimist <aaron@raim.ist>
We were pulling the full auth chain for the room out of the DB each time
we backfilled, which can be *huge* for large rooms and is totally
unnecessary.
The hope here is that by moving all the schema files into synapse/storage/schema, it gets a bit easier for newcomers to navigate.
It certainly got easier for me to write a helpful README. There's more to do on that front, but I'll follow up with other PRs for that.
This is an update based on changes to MSC2946. The origin_server_ts
of the m.room.create event is copied into the creation_ts field for each
room returned from the spaces summary.
Synapse can be quite memory intensive, and unless care is taken to tune
the GC thresholds it can end up thrashing, causing noticable performance
problems for large servers. We fix this by limiting how often we GC a
given generation, regardless of current counts/thresholds.
This does not help with the reverse problem where the thresholds are set
too high, but that should only happen in situations where they've been
manually configured.
Adds a `gc_min_seconds_between` config option to override the defaults.
Fixes#9890.
* Add healthcheck startup delay by 5secs and reduced interval check to 15s
to reduce waiting time for docker aware edge routers bringing an
instance online
This leaves out all optional keys from /sync. This should be fine for all clients tested against conduit already, but it may break some clients, as such we should check, that at least most of them don't break horribly and maybe back out some of the individual changes. (We can probably always leave out groups for example, while the others may cause more issues.)
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Support the delete of a room through DELETE request and mark
previous request as deprecated through documentation.
Signed-off-by: Thibault Ferrante <thibault.ferrante@pm.me>
This fixes a regression where the logging context for runWithConnection
was reported as runWithConnection instead of the connection name,
e.g. "POST-XYZ".
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
This ensures that something like an auth error (403) will be
returned to the requester instead of attempting to try more
servers, which will likely result in the same error, and then
passing back a generic 400 error.
First of all, a fixup to `FakeChannel` which is needed to make it work with the default HTTP channel implementation.
Secondly, it looks like we no longer need `_PushHTTPChannel`, because as of #8013, the producer that gets attached to the `HTTPChannel` is now an `IPushProducer`. This is good, because it means we can remove a whole load of test-specific boilerplate which causes variation between tests and production.
Applied a (slightly modified) patch from https://github.com/matrix-org/synapse/issues/9574.
As far as I understand this would allow the cookie set during the OIDC flow to work on deployments using public baseurls that do not sit at the URL path root.
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join
rules.
This only applies to an experimental room version, as defined in MSC3083.
This basically speeds up federation by "squeezing" each individual dual database call (to destinations and destination_rooms), which previously happened per every event, into one call for an entire batch (100 max).
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
This PR adds a Dockerfile and some supporting files to the `docker/` directory. The Dockerfile's intention is to spin up a container with:
* A Synapse main process.
* Any desired worker processes, defined by a `SYNAPSE_WORKERS` environment variable supplied at runtime.
* A redis for worker communication.
* A nginx for routing traffic.
* A supervisord to start all worker processes and monitor them if any go down.
Note that **this is not currently intended to be used in production**. If you'd like to use Synapse workers with Docker, instead make use of the official image, with one worker per container. The purpose of this dockerfile is currently to allow testing Synapse in worker mode with the [Complement](https://github.com/matrix-org/complement/) test suite.
`configure_workers_and_start.py` is where most of the magic happens in this PR. It reads from environment variables (documented in the file) and creates all necessary config files for the processes. It is the entrypoint of the Dockerfile, and thus is run any time the docker container is spun up, recreating all config files in case you want to use a different set of workers. One can specify which workers they'd like to use by setting the `SYNAPSE_WORKERS` environment variable (as a comma-separated list of arbitrary worker names) or by setting it to `*` for all worker processes. We will be using the latter in CI.
Huge thanks to @MatMaul for helping get this all working 🎉 This PR is paired with its equivalent on the Complement side: https://github.com/matrix-org/complement/pull/62.
Note, for the purpose of testing this PR before it's merged: You'll need to (re)build the base Synapse docker image for everything to work (`matrixdotorg/synapse:latest`). Then build the worker-based docker image on top (`matrixdotorg/synapse:workers`).
Context is in https://github.com/matrix-org/synapse/issues/9764#issuecomment-818615894.
I struggled to find a more official link for this. The problem occurs when using WSL1 instead of WSL2, which some Windows platforms (at least Server 2019) still don't have. Docker have updated their documentation to paint a much happier picture now given WSL2's support.
The last sentence here can probably be removed once WSL1 is no longer around... though that will likely not be for a very long time.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
This change ensures that the appservice registration behaviour follows the spec. We decided to do this for Dendrite, so it made sense to also make a PR for synapse to correct the behaviour.
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
We pull all destinations requiring catchup from the DB in batches.
However, if all those destinations get filtered out (due to the
federation sender being sharded), then the `last_processed` destination
doesn't get updated, and we keep requesting the same set repeatedly.
They don't make any sense on the intermediate builder image. The final
images needs them to be of use for anyone.
Signed-off-by: Johannes Wienke <languitar@semipol.de>
When joining a room with join rules set to 'restricted', check if the
user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
This PR modifies `GaugeBucketCollector` to only report data once it has been updated, rather than initially reporting a value of 0. Fixes zero values being reported for some metrics on startup until a background job to update the metric's value runs later.
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
The `remote_media_cache_thumbnails_media_origin_media_id_thumbna_key`
constraint is superceded by
`remote_media_repository_thumbn_media_origin_id_width_height_met` (which adds
`thumbnail_method` to the unique key).
PR #7124 made an attempt to remove the old constraint, but got the name wrong,
so it didn't work. Here we update the bg update and rerun it.
Fixes#8649.
The regex should be terminated so that subdomain matches of another
domain are not accepted. Just ensuring that someone doesn't shoot
themselves in the foot by copying our example.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
This PR rewrites the original complement.sh script with a number of improvements:
* We can now use a local checkout of Complement (configurable with `COMPLEMENT_DIR`), though the default behaviour still downloads the master branch.
* You can now specify a regex of test names to run, or just run all tests.
* We now use the Synapse test blacklist tag (so all tests will pass).
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
I've reiterated the advice about using `oidc` to migrate, since I've seen a few
people caught by this.
I've also removed a couple of the examples as they are duplicating the OIDC
documentation, and I think they might be leading people astray.
If you have the wrong version of `cryptography` installed, synapse suggests:
```
To install run:
pip install --upgrade --force 'cryptography>=3.4.7;python_version>='3.6''
```
However, the use of ' inside '...' doesn't work, so when you run this, you get
an error.
Make pip install faster in Docker build for [Complement](https://github.com/matrix-org/complement) testing.
If files have changed in a `COPY` command, Docker will invalidate all of the layers below. So I changed the order of operations to install all dependencies before we `COPY synapse /synapse/synapse/`. This allows Docker to use our cached layer of dependencies even when we change the source of Synapse and speed up builds dramatically! `53.5s` -> `3.7s` builds 🤘
As an alternative, I did try using BuildKit caches but this still took 30 seconds overall on that step. 15 seconds to gather the dependencies from the cache and another 15 seconds to `Installing collected packages`.
Fix https://github.com/matrix-org/synapse/issues/9364
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Make it clearer in the source install step that the platform specific
prerequisites must be installed first.
Signed-off-by: Serban Constantin <serban.constantin@gmail.com>
