Fix https://github.com/matrix-org/synapse/issues/15618
### Before
```
2023-05-17 22:51:36-0500 [-] 2023-05-17 22:51:36,889 - synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### After
```
2023-05-19 18:16:20-0500 [-] synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### Dev notes
The `Twisted.Logger` controls the `2023-05-19 18:16:20-0500 [-]` prefix, see : [`twisted/twisted` -> `src/twisted/logger/_format.py#L362-L374`](34b161e66b/src/twisted/logger/_format.py (L362-L374))
And we delegate our logs to the Twisted Logger for the tests which puts it in `_trial_temp/test.log`
The event_fields property in filters should use the proper
escape rules, namely backslashes can be escaped with
an additional backslash.
This adds tests (adapted from matrix-js-sdk) and implements
the logic to properly split the event_fields strings.
...to try to control memory usage. `HomeServerConfig`s hold on to
many Jinja2 objects, which come out to over 0.5 MiB per config.
Over the course of a full test run, the cache grows to ~360 entries.
Limit it to 8 entries.
Part of #15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
R30v2 has been out since 2021-07-19 (https://github.com/matrix-org/synapse/pull/10332)
and we started collecting stats on 2021-08-16. Since it's been over a year now
(almost 2 years), this is enough grace period for us to now rip it out.
Synapse will no longer send (or respond to) the unstable flags
for faster joins. These were only available behind a configuration
flag and handled in parallel with the stable flags.
This change fixes two memory leaks during `trial` test runs.
Garbage collection is disabled during each test case and a gen-0 GC is
run at the end of each test. However, when the gen-0 GC is run, the
`TestCase` object usually still holds references to the `HomeServer`
used during the test. As a result, the `HomeServer` gets promoted to
gen-1 and then never garbage collected.
Fix this by periodically running full GCs.
Additionally, fix `HomeServer`s leaking after tests that touch inbound
federation due to `FederationRateLimiter`s adding themselves to a global
set, by turning the set into a `WeakSet`.
Resolves#15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
To track changes in MSC2666:
- The change from `/mutual_rooms/{user_id}` to `/mutual_rooms?user_id={user_id}`.
- The addition of `next_batch_token` (and logic).
- Unstable flag now being `uk.half-shot.msc2666.query_mutual_rooms`.
- The error code when your own user is requested.
There are two situations which were previously not properly checked:
1. If the requested URL was replaced with an oEmbed URL, then the
oEmbed URL was not checked against url_preview_url_blacklist.
2. Follow-up URLs (either via autodiscovery of oEmbed or to pre-cache
images) were not checked against url_preview_url_blacklist.
Fix the following `mypy` errors when running `mypy` with Python 3.7:
```
synapse/storage/controllers/stats.py:58: error: "Counter" is not subscriptable, use "typing.Counter" instead [misc]
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
Part of https://github.com/matrix-org/synapse/issues/15603
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default, https://peps.python.org/pep-0585/#implementation
Fix:
```
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default,
https://peps.python.org/pep-0585/#implementation
MSC3389 proposes protecting the relation type & parent event ID
from redaction. This keeps the relation information intact after
redaction which helps with some UX flaws (e.g. deleting an
event causes it to no longer be in a thread, which is confusing).
* Add master to the instance_map as part of Complement, have ReplicationEndpoint look at instance_map for master.
* Fix typo in drive by.
* Remove unnecessary worker_replication_* bits from unit tests and add master to instance_map(hopefully in the right place)
* Several updates:
1. Switch from master to main for naming the main process in the instance_map. Add useful constants for easier adjustment of names in the future.
2. Add backwards compatibility for worker_replication_* to allow time to transition to new style. Make sure to prioritize declaring main directly on the instance_map.
3. Clean up old comments/commented out code.
4. Adjust unit tests to match with new code.
5. Adjust Complement setup infrastructure to only add main to the instance_map if workers are used and remove now unused options from the worker.yaml template.
* Initial Docs upload
* Changelog
* Missed some commented out code that can go now
* Remove TODO comment that no longer holds true.
* Fix links in docs
* More docs
* Remove debug logging
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Apply suggestions from code review
Co-authored-by: reivilibre <olivier@librepush.net>
* Update version to latest, include completeish before/after examples in upgrade notes.
* Fix up and docs too
---------
Co-authored-by: reivilibre <olivier@librepush.net>
Separate out a HTTP client for replication in preparation for
also supporting using UNIX sockets. The major difference from
the base class is that this does not use treq to handle HTTP
requests.
This stops media (and thumbnails) from being accessed from the
listed domains. It does not delete any already locally cached media,
but will prevent accessing it.
Note that admin APIs are unaffected by this change.
MSC3984 proxies /keys/query requests to appservices, but servers will
can also requests devices / keys from the /user/devices endpoint.
The formats are close enough that we can "proxy" that /user/devices to
appservices (by calling /keys/query) and then change the format of the
returned data before returning it over federation.
Behind a configuration flag this adds + to the list of allowed
characters in Matrix IDs. The main feature this enables is
using full E.164 phone numbers as Matrix IDs.
Add an `is_mine_server_name` method, similar to `is_mine_id`.
Ideally we would use this consistently, instead of sometimes comparing
against `hs.hostname` and other times reaching into
`hs.config.server.server_name`.
Also fix a bug in the tests where `hs.hostname` would sometimes differ
from `hs.config.server.server_name`.
Signed-off-by: Sean Quah <seanq@matrix.org>
#15514 introduced a regression where Synapse would encounter
`PartialDownloadError`s when fetching OpenID metadata for certain
providers on startup. Due to #8088, this prevents Synapse from starting
entirely.
Revert the change while we decide what to do about the regression.
Pushers tend to make many connections to the same HTTP host
(e.g. a new event comes in, causes events to be pushed, and then
the homeserver connects to the same host many times). Due to this
the per-host HTTP connection pool size was increased, but this does
not make sense for other SimpleHttpClients.
Add a parameter for the connection pool and override it for pushers
(making a separate SimpleHttpClient for pushers with the increased
configuration).
This returns the HTTP connection pool settings to the default Twisted
ones for non-pusher HTTP clients.
Adds an optional keyword argument to the /relations API which
will recurse a limited number of event relationships.
This will cause the API to return not just the events related to the
parent event, but also events related to those related to the parent
event, etc.
This is disabled by default behind an experimental configuration
flag and is currently implemented using prefixed parameters.
MSC3983 provides a way to request multiple OTKs at once from appservices,
this extends this concept to the Client-Server API.
Note that this will likely be spit out into a separate MSC, but is currently part of
MSC3983.
It can be useful to always return the fallback key when attempting to
claim keys. This adds an unstable endpoint for `/keys/claim` which
always returns fallback keys in addition to one-time-keys.
The fallback key(s) are not marked as "used" unless there are no
corresponding OTKs.
This is currently defined in MSC3983 (although likely to be split out
to a separate MSC). The endpoint shape may change or be requested
differently (i.e. a keyword parameter on the current endpoint), but the
core logic should be reasonable.
Before this change:
* `PerspectivesKeyFetcher` and `ServerKeyFetcher` write to `server_keys_json`.
* `PerspectivesKeyFetcher` also writes to `server_signature_keys`.
* `StoreKeyFetcher` reads from `server_signature_keys`.
After this change:
* `PerspectivesKeyFetcher` and `ServerKeyFetcher` write to `server_keys_json`.
* `PerspectivesKeyFetcher` also writes to `server_signature_keys`.
* `StoreKeyFetcher` reads from `server_keys_json`.
This results in `StoreKeyFetcher` now using the results from `ServerKeyFetcher`
in addition to those from `PerspectivesKeyFetcher`, i.e. keys which are directly
fetched from a server will now be pulled from the database instead of refetched.
An additional minor change is included to avoid creating a `PerspectivesKeyFetcher`
(and checking it) if no `trusted_key_servers` are configured.
The overall impact of this should be better usage of cached results:
* If a server has no trusted key servers configured then it should reduce how often keys
are fetched.
* if a server's trusted key server does not have a requested server's keys cached then it
should reduce how often keys are directly fetched.
These two lines:
```
config_obj = HomeServerConfig()
config_obj.parse_config_dict(config, "", "")
```
are called many times with the exact same value for `config`.
As the test suite is CPU-bound and non-negligeably time is spent in
`parse_config_dict`, this saves ~5% on the overall runtime of the Trial
test suite (tested with both `-j2` and `-j12` on a 12t CPU).
This is sadly rather limited, as the cache cannot be shared between
processes (it contains at least jinja2.Template and RLock objects which
aren't pickleable), and Trial tends to run close tests in different
processes.
* Change `store_server_verify_keys` to take a `Mapping[(str, str), FKR]`
This is because we already can't handle duplicate keys — leads to cardinality violation
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
This moves `redacts` from being a top-level property to
a `content` property in a new room version.
MSC2176 (which was previously implemented) states to not
`redact` this property.
* raise a ConfigError on an invalid app_service_config_files
* changelog
* Move config check to read_config
* Add test
* Ensure list also contains strings
This uses the specced /_matrix/app/v1/... paths instead of the
"legacy" paths. If the homeserver receives an error it will retry
using the legacy path.
* Revert "Fix registering a device on an account with lots of devices (#15348)"
This reverts commit f0d8f66eaa.
* Revert "Delete stale non-e2e devices for users, take 3 (#15183)"
This reverts commit 78cdb72cd6.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for devices in addition
to any information stored in the Synapse database.
Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
Experimental support for MSC3983 is behind a configuration flag.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for one-time keys *if*
there are none uploaded to Synapse.
This makes it so that we rely on the `device_id` to delete pushers on logout,
instead of relying on the `access_token_id`. This ensures we're not removing
pushers on token refresh, and prepares for a world without access token IDs
(also known as the OIDC).
This actually runs the `set_device_id_for_pushers` background update, which
was forgotten in #13831.
Note that for backwards compatibility it still deletes pushers based on the
`access_token` until the background update finishes.
Invalid mentions data received over the Client-Server API should
be rejected with a 400 error. This will hopefully stop clients from
sending invalid data, although does not help with data received
over federation.
Additionally:
* Consistently use `freeze()` in test
---------
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
When a room is deleted in Synapse we remove the event forward
extremities in the room, so if (say a bot) tries to send a message into
the room we error out due to not being able to calculate prev events for
the new event *before* we check if the sender is in the room.
Fixes#8094
With Redis commands do not need to be re-issued by the main
process (they fan-out to all processes at once) and thus it is no
longer necessary to worry about them reflecting recursively forever.
* Scaffolding for background process to refresh profiles
* Add scaffolding for background process to refresh profiles for a given server
* Implement the code to select servers to refresh from
* Ensure we don't build up multiple looping calls
* Make `get_profile` able to respect backoffs
* Add logic for refreshing users
* When backing off, schedule a refresh when the backoff is over
* Wake up the background processes when we receive an interesting state event
* Add tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comment about 1<<62
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Tweak docstring and type hint
* Flip logic and provide better name
* Separate decision from action
* Track a set of strings, not EventBases
* Require explicit boolean options from callers
* Add explicit option for partial state rooms
* Changelog
* Rename param
This removes the experimental configuration option and
always escapes the push rule condition keys.
Also escapes any (experimental) push rule condition keys
in the base rules which contain dot in a field name.
Enables MSC3925 support by default, which:
* Includes the full edit event in the bundled aggregations of an
edited event.
* Stops modifying the original event's content to return the new
content from the edit event.
This is a backwards-incompatible change that is considered to be
"correct" by the spec.
This replaces the specific `is_user_mention` push rule condition
used in MSC3952 with the generic `exact_event_property_contains`
push rule condition from MSC3966.
It turns out that no clients rely on server-side aggregation of `m.annotation`
relationships: it's just not very useful as currently implemented.
It's also non-trivial to calculate.
I want to remove it from MSC2677, so to keep the implementation in line, let's
remove it here.
Internally the push rules module uses a `pattern_type` property for `event_match`
conditions (and `related_event_match`) to mark the condition as matching the
current user's Matrix ID or localpart.
This is leaky to the Client-Server API where a user can successfully set a condition
which provides `pattern_type` instead of `pattern` (note that there's no benefit to
doing this -- the user can just use their own Matrix ID or localpart instead). When
serializing back to the client the `pattern_type` property is converted into a proper
`pattern`.
The following changes are made to avoid this:
* Separate the `KnownCondition::EventMatch` enum value into `EventMatch`
and `EventMatchType`, each with their own expected properties. (Note that a
similar change is made for `RelatedEventMatch`.)
* Make it such that the `pattern_type` variants serialize to the same condition kind,
but cannot be deserialized (since they're only provided by base rules).
* As a final tweak, convert `user_id` vs. `user_localpart` values into an enum.
* Admin api to delete event report
* lint + tests
* newsfile
* Apply suggestions from code review
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
* revert changes - move to WorkerStore
* update unit test
* Note that timestamp is in millseconds
---------
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
* Removes the `v1` directory from `test.rest.media.v1`.
* Moves the non-REST code from `synapse.rest.media.v1` to `synapse.media`.
* Flatten the `v1` directory from `synapse.rest.media`, but leave compatiblity
with 3rd party media repositories and spam checkers.
* Fix a long-standing bug where non-ASCII characters in search terms,
including accented letters, would not match characters in a different
case.
* Fix a long-standing bug where search terms using combining accents
would not match display names using precomposed accents and vice
versa.
To fully take effect, the user directory must be rebuilt after this
change.
Fixes#14630.
Signed-off-by: Sean Quah <seanq@matrix.org>
Previously if an autodiscovered oEmbed request failed (e.g. the
oEmbed endpoint is down or does not exist) then the entire URL
preview would fail. Instead we now return everything we can, even
if this additional request fails.
* Change `create_room` return type
* Don't return room alias from /createRoom
* Update other callsites
* Fix up mypy complaints
It looks like new_room_user_id is None iff new_room_id is None. It's a
shame we haven't expressed this in a way that mypy can understand.
* Changelog
* Update mypy and mypy-zope
* Remove unused ignores
These used to suppress
```
synapse/storage/engines/__init__.py:28: error: "__new__" must return a
class instance (got "NoReturn") [misc]
```
and
```
synapse/http/matrixfederationclient.py:1270: error: "BaseException" has no attribute "reasons" [attr-defined]
```
(note that we check `hasattr(e, "reasons")` above)
* Avoid empty body warnings, sometimes by marking methods as abstract
E.g.
```
tests/handlers/test_register.py:58: error: Missing return statement [empty-body]
tests/handlers/test_register.py:108: error: Missing return statement [empty-body]
```
* Suppress false positive about `JaegerConfig`
Complaint was
```
synapse/logging/opentracing.py:450: error: Function "Type[Config]" could always be true in boolean context [truthy-function]
```
* Fix not calling `is_state()`
Oops!
```
tests/rest/client/test_third_party_rules.py:428: error: Function "Callable[[], bool]" could always be true in boolean context [truthy-function]
```
* Suppress false positives from ParamSpecs
````
synapse/logging/opentracing.py:971: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
synapse/logging/opentracing.py:1017: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
````
* Drive-by improvement to `wrapping_logic` annotation
* Workaround false "unreachable" positives
See https://github.com/Shoobx/mypy-zope/issues/91
```
tests/http/test_proxyagent.py:626: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:762: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:826: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:838: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:845: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:151: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:452: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:60: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:93: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:127: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:152: error: Statement is unreachable [unreachable]
```
* Changelog
* Tweak DBAPI2 Protocol to be accepted by mypy 1.0
Some extra context in:
- https://github.com/matrix-org/python-canonicaljson/pull/57
- https://github.com/python/mypy/issues/6002
- https://mypy.readthedocs.io/en/latest/common_issues.html#covariant-subtyping-of-mutable-protocol-members-is-rejected
* Pull in updated canonicaljson lib
so the protocol check just works
* Improve comments in opentracing
I tried to workaround the ignores but found it too much trouble.
I think the corresponding issue is
https://github.com/python/mypy/issues/12909. The mypy repo has a PR
claiming to fix this (https://github.com/python/mypy/pull/14677) which
might mean this gets resolved soon?
* Better annotation for INTERACTIVE_AUTH_CHECKERS
* Drive-by AUTH_TYPE annotation, to remove an ignore
This replaces the specific `is_room_mention` push rule condition
used in MSC3952 with the generic `exact_event_match` push rule
condition from MSC3758.
No functionality changes due to this.
Fixes#12801.
Complement tests are at
https://github.com/matrix-org/complement/pull/567.
Avoid blocking on full state when handling a subsequent join into a
partial state room.
Also always perform a remote join into partial state rooms, since we do
not know whether the joining user has been banned and want to avoid
leaking history to banned users.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
It's important that collections returned from `@cached` methods are not
modified, otherwise future retrievals from the cache will return the
modified collection.
This applies to the return values from `@cached` methods and the values
inside the dictionaries returned by `@cachedList` methods. It's not
necessary for the dictionaries returned by `@cachedList` methods
themselves to be read-only.
Signed-off-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
This specifies to search for an exact value match, instead of
string globbing. It only works across non-compound JSON values
(null, boolean, integer, and strings).
* -> None for test methods
* A first batch of type fixes
* Introduce common parent test case
* Fixup that big test method
* tests.module_api passes mypy
* Changelog
This disambiguates keys which attempt to match fields
with a dot in them (e.g. m.relates_to).
Disabled by default behind an experimental configuration flag.
* Fix MediaStorage type hint
* Typecheck tests.rest.media.v1.test_media_storage
* Changelog
* Remove assert and make the comment succinct
* Fix syntax for olddeps
* Tweak http types in Synapse
AFACIS these are correct, and they make mypy happier on tests.http.
* Type hints for test_proxyagent
* type hints for test_srv_resolver
* test_matrix_federation_agent
* tests.http.server._base
* tests.http.__init__
* tests.http.test_additional_resource
* tests.http.test_client
* tests.http.test_endpoint
* tests.http.test_matrixfederationclient
* tests.http.test_servlet
* tests.http.test_simple_client
* tests.http.test_site
* One fixup in tests.server
* Untyped defs
* Changelog
* Fixup syntax for Python 3.7
* Fix olddeps syntax
* Use a twisted IPv4 addr for dummy_address
* Fix typo, thanks Sean
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Remove redundant `Optional`
---------
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Make tests.federation pass mypy
* Untyped defs in tests.federation.transport
* test methods return None
* Remaining type hints in tests.federation
* Changelog
* Avoid an uncessary type-ignore
* Accept a Sequence of events in synapse.appservice
This avoids some casts/ignores in the tests I'm about to fixup. It seems
that `List[Mock]` is not a subtype of `List[EventBase]`, but
`Sequence[Mock]` is a subtype of `Sequence[EventBase]`. So presumably
`Mock` is considered a subtype of anything, much like `Any`.
* make tests.appservice.test_scheduler pass mypy
* Extra hints in tests.appservice.test_scheduler
* Extra hints in tests.appservice.test_api
* Extra hints in tests.appservice.test_appservice
* Disallow untyped defs
* Changelog
Co-authored-by: Brad Murray <brad@beeper.com>
Co-authored-by: Nick Barrett <nick@beeper.com>
Copy the suppress_edits push rule from Beeper to implement MSC3958.
9415a1284b/rust/src/push/base_rules.rs (L98-L114)
Ensure that the list of servers in a partial state room always contains
the server we joined off.
Also refactor `get_partial_state_servers_at_join` to return `None` when
the given room is no longer partial stated, to explicitly indicate when
the room has partial state. Otherwise it's not clear whether an empty
list means that the room has full state, or the room is partial stated,
but the server we joined off told us that there are no servers in the
room.
Signed-off-by: Sean Quah <seanq@matrix.org>
Since pyo3-log is initialized very early in the Python start-up
it caches the state of the loggers before they're fully initialized
(and thus are essentially disabled). Whenever we reload the
logging configuration we now also tell pyo3-log to discard
any cached logging configuration it has; it will refetch the
current logging configuration from Python at the next point
it logs.
This fixes Rust log lines not appearing in the homeserver logs.
The `parse_enum` helper pulls an enum value from the query string
(by delegating down to the parse_string helper with values generated
from the enum).
This is used to pull out "f" and "b" in most places and then we thread
the resulting Direction enum throughout more code.
The previous assumption was that the stream_id column was unique
(for a room ID, receipt type, user ID tuple), but this turned out to be
incorrect.
Now find the max stream ID, then map this back to a database-specific
row identifier and delete other rows which match the (room ID, receipt type,
user ID) tuple, but *not* the row ID.
#14910 fixed the regression introduced by #13873 where sqlite database
migrations would no longer run inside a transaction. However, it
committed the transaction before Synapse updated its bookkeeping of
which migrations have been run, which means that migrations may be run
again after they have completed successfully.
Leave the transaction open at the end of `executescript`, to restore the
old, correct behaviour. Also make the PostgreSQL behaviour consistent
with SQLite.
Fixes#14909.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Better test for bad values in power levels events
The previous test only checked that Synapse didn't raise an exception,
but didn't check that we had correctly interpreted the value of the
dodgy power level.
It also conflated two things: bad room notification levels, and bad user
levels. There _is_ logic for converting the latter to integers, but we
should test it separately.
* Check we ignore types that don't convert to int
* Handle `None` values in `notifications.room`
* Changelog
* Also test that bad values are rejected by event auth
* Docstring
* linter scripttttttttt
MSC3952 defines push rules which searches for mentions in a list of
Matrix IDs in the event body, instead of searching the entire event
body for display name / local part.
This is implemented behind an experimental configuration flag and
does not yet implement the backwards compatibility pieces of the MSC.
* Allow `AbstractSet` in `StrCollection`
Or else frozensets are excluded. This will be useful in an upcoming
commit where I plan to change a function that accepts `List[str]` to
accept `StrCollection` instead.
* `rooms_to_exclude` -> `rooms_to_exclude_globally`
I am about to make use of this exclusion mechanism to exclude rooms for
a specific user and a specific sync. This rename helps to clarify the
distinction between the global config and the rooms to exclude for a
specific sync.
* Better function names for internal sync methods
* Track a list of excluded rooms on SyncResultBuilder
I plan to feed a list of partially stated rooms for this sync to ignore
* Exclude partial state rooms during eager sync
using the mechanism established in the previous commit
* Track un-partial-state stream in sync tokens
So that we can work out which rooms have become fully-stated during a
given sync period.
* Fix mutation of `@cached` return value
This was fouling up a complement test added alongside this PR.
Excluding a room would mean the set of forgotten rooms in the cache
would be extended. This means that room could be erroneously considered
forgotten in the future.
Introduced in #12310, Synapse 1.57.0. I don't think this had any
user-visible side effects (until now).
* SyncResultBuilder: track rooms to force as newly joined
Similar plan as before. We've omitted rooms from certain sync responses;
now we establish the mechanism to reintroduce them into future syncs.
* Read new field, to present rooms as newly joined
* Force un-partial-stated rooms to be newly-joined
for eager incremental syncs only, provided they're still fully stated
* Notify user stream listeners to wake up long polling syncs
* Changelog
* Typo fix
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Unnecessary list cast
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Rephrase comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Another comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Fixup merge(?)
* Poke notifier when receiving un-partial-stated msg over replication
* Fixup merge whoops
Thanks MV :)
Co-authored-by: Mathieu Velen <mathieuv@matrix.org>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Currently, we will try to start a new partial state sync every time we
perform a remote join, which is undesirable if there is already one
running for a given room.
We intend to perform remote joins whenever additional local users wish
to join a partial state room, so let's ensure that we do not start more
than one concurrent partial state sync for any given room.
------------------------------------------------------------------------
There is a race condition where the homeserver leaves a room and later
rejoins while the partial state sync from the previous membership is
still running. There is no guarantee that the previous partial state
sync will process the latest join, so we restart it if needed.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Change Documentation to have v10 as default room version
* Change Default Room version to 10
* Add changelog entry for default room version swap
* Add changelog entry for v10 default room version in docs
* Clarify doc changelog entry
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
* Improve Documentation changes.
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
* Update Changelog entry to have correct format
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
* Update Spec Version to 1.5
* Only need 1 changelog.
* Fix test.
* Update "Changed in" line
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Patrick Cloke <patrickc@matrix.org>
Serving partial join responses is no longer experimental. They will only be served under the stable identifier if the the undocumented config flag experimental.msc3706_enabled is set to true.
Synapse continues to request a partial join only if the undocumented config flag experimental.faster_joins is set to true; this setting remains present and unaffected.
We were incorrectly checking if the *local* token had been advanced, rather than the token for the remote instance.
In practice, I don't think this has caused any bugs due to where we use `wait_for_stream_position`, as critically we don't use it on instances that also write to the given streams (and so the local token will lag behind all remote tokens).
* Also use stable name in SendJoinResponse struct
follow-up to #14832
* Changelog
* Fix a rename I missed
* Run black
* Update synapse/federation/federation_client.py
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Use new query param when requesting a partial join
* Read new query param when serving partial join
* Provide new field names when serving partial joins
* Read new field names from partial join response
* Changelog
When there are many synchronous requests waiting on a
`_PerHostRatelimiter`, each request will be started recursively just
after the previous request has completed. Under the right conditions,
this leads to stack exhaustion.
A common way for requests to become synchronous is when the remote
client disconnects early, because the homeserver is overloaded and slow
to respond.
Avoid stack exhaustion under these conditions by deferring subsequent
requests until the next reactor tick.
Fixes#14480.
Signed-off-by: Sean Quah <seanq@matrix.org>
Two parts to this:
* Bundle the whole of the replacement with any edited events. This is backwards-compatible so I haven't put it behind a flag.
* Optionally, inhibit server-side replacement of edited events. This has scope to break things, so it is currently disabled by default.
It doesn't seem valid that HTML entities should appear in
the title field of oEmbed responses, but a popular WordPress
plug-in seems to do it.
There should not be harm in unescaping these.
* Fixes#12277 :Disable sending confirmation email when 3pid is disabled
* Fix test_add_email_if_disabled test case to reflect changes to enable_3pid_changes flag
* Add changelog file
* Rename newsfragment.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
PKCE can protect against certain attacks and is enabled by default. Support
can be controlled manually by setting the pkce_method of each oidc_providers
entry to 'auto' (default), 'always', or 'never'.
This is required by Twitter OAuth 2.0 support.
* Declare new config
* Parse new config
* Read new config
* Don't use trial/our TestCase where it's not needed
Before:
```
$ time trial tests/events/test_utils.py > /dev/null
real 0m2.277s
user 0m2.186s
sys 0m0.083s
```
After:
```
$ time trial tests/events/test_utils.py > /dev/null
real 0m0.566s
user 0m0.508s
sys 0m0.056s
```
* Helper to upsert to event fields
without exceeding size limits.
* Use helper when adding invite/knock state
Now that we allow admins to include events in prejoin room state with
arbitrary state keys, be a good Matrix citizen and ensure they don't
accidentally create an oversized event.
* Changelog
* Move StateFilter tests
should have done this in #14668
* Add extra methods to StateFilter
* Use StateFilter
* Ensure test file enforces typed defs; alphabetise
* Workaround surprising get_current_state_ids
* Whoops, fix mypy
Fixes#13655
This change uses ICU (International Components for Unicode) to improve boundary detection in user search.
This change also adds a new dependency on libicu-dev and pkg-config for the Debian packages, which are available in all supported distros.
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
An empty cache does not mean the entity has no changed, if
it is earlier than the earliest known stream position return that
the entity *has* changed since the cache cannot accurately
answer that query.
A batch of changes intended to make it easier to trace to-device messages through the system.
The intention here is that a client can set a property org.matrix.msgid in any to-device message it sends. That ID is then included in any tracing or logging related to the message. (Suggestions as to where this field should be documented welcome. I'm not enthusiastic about speccing it - it's very much an optional extra to help with debugging.)
I've also generally improved the data we send to opentracing for these messages.
The internal methods of the StreamChangeCache were inconsistently
treating the earliest known stream position as valid. It is now treated as
invalid, meaning the cache cannot determine if an entity at the earliest
known stream position has changed or not.
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Add support for MSC3931: Room Version Supports push rule condition
* Create experimental flag for future work, and use it to gate MSC3931
* Changelog entry
* Use `device_one_time_keys_count` to match MSC3202
Rename the `device_one_time_key_counts` key in responses to
`device_one_time_keys_count` to match the name specified by MSC3202.
Also change related variable/class names for consistency.
Signed-off-by: Andrew Ferrazzutti <andrewf@element.io>
* Update changelog.d/14565.misc
* Revert name change for `one_time_key_counts` key
as this is a different key altogether from `device_one_time_keys_count`,
which is used for `/sync` instead of appservice transactions.
Signed-off-by: Andrew Ferrazzutti <andrewf@element.io>
Include the thread_id field when sending read receipts over
federation. This might result in the same user having multiple
read receipts per-room, meaning multiple EDUs must be sent
to encapsulate those receipts.
This restructures the PerDestinationQueue APIs to support
multiple receipt EDUs, queue_read_receipt now becomes linear
time in the number of queued threaded receipts in the room for
the given user, it is expected this is a small number since receipt
EDUs are sent as filler in transactions.
This commit adds support for handling a provided avatar picture URL
when logging in via SSO.
Signed-off-by: Ashish Kumar <ashfame@users.noreply.github.com>
Fixes#9357.
This was the last untyped handler from the HomeServer object. Since
it was being treated as Any (and thus unchecked) it was being used
incorrectly in a few places.
When a local device list change is added to
`device_lists_changes_in_room`, the `converted_to_destinations` flag is
set to `FALSE` and the `_handle_new_device_update_async` background
process is started. This background process looks for unconverted rows
in `device_lists_changes_in_room`, copies them to
`device_lists_outbound_pokes` and updates the flag.
To update the `converted_to_destinations` flag, the database performs a
`DELETE` and `INSERT` internally, which fragments the table. To avoid
this, track unconverted rows using a `(stream ID, room ID)` position
instead of the flag.
From now on, the `converted_to_destinations` column indicates rows that
need converting to outbound pokes, but does not indicate whether the
conversion has already taken place.
Closes#14037.
Signed-off-by: Sean Quah <seanq@matrix.org>
Avoid an n+1 query problem and fetch the bundled aggregations for
m.reference relations in a single query instead of a query per event.
This applies similar logic for as was previously done for edits in
8b309adb43 (#11660; threads
in b65acead42 (#11752); and
annotations in 1799a54a54 (#14491).
Avoid an n+1 query problem and fetch the bundled aggregations for
m.annotation relations in a single query instead of a query per event.
This applies similar logic for as was previously done for edits in
8b309adb43 (#11660) and threads
in b65acead42 (#11752).
* Add tests for StreamIdGenerator
* Drive-by: annotate all defs
* Revert "Revert "Remove slaved id tracker (#14376)" (#14463)"
This reverts commit d63814fd73, which in
turn reverted 36097e88c4. This restores
the latter.
* Fix StreamIdGenerator not handling unpersisted IDs
Spotted by @erikjohnston.
Closes#14456.
* Changelog
Co-authored-by: Nick Mills-Barrett <nick@fizzadar.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
Remove type hints from comments which have been added
as Python type hints. This helps avoid drift between comments
and reality, as well as removing redundant information.
Also adds some missing type hints which were simple to fill in.
As part of the database migration to support threaded receipts, there is
a possible window in between
`73/08thread_receipts_non_null.sql.postgres` removing the original
unique constraints on `receipts_linearized` and `receipts_graph` and the
`reeipts_linearized_unique_index` and `receipts_graph_unique_index`
background updates from `72/08thread_receipts.sql` completing where
the unique constraints on `receipts_linearized` and `receipts_graph` are
missing. Any emulated upserts on these tables must therefore be
performed with a lock held, otherwise duplicate rows can end up in the
tables when there are concurrent emulated upserts. Fix the missing lock.
Note that emulated upserts no longer happen by default on sqlite, since
the minimum supported version of sqlite supports native upserts by
default now.
Finally, clean up any duplicate receipts that may have crept in before
trying to create the `receipts_graph_unique_index` and
`receipts_linearized_unique_index` unique indexes.
Signed-off-by: Sean Quah <seanq@matrix.org>
For forward compatibility, Synapse needs to ignore fields it does not
recognise instead of raising an error.
Fixes#14365.
Signed-off-by: Sean Quah <seanq@matrix.org>
If configured an OIDC IdP can log a user's session out of
Synapse when they log out of the identity provider.
The IdP sends a request directly to Synapse (and must be
configured with an endpoint) when a user logs out.
* Introduce a test for the old behaviour which we want to restore
* Reintroduce the old behaviour in a simpler way
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Use 1 credit instead of 2 for creating a room: be more lenient than before
Notably, the UI in Element Web was still broken after restoring to prior behaviour.
After discussion, we agreed that it would be sensible to increase the limit.
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
PostgreSQL 14 changed the behavior of `websearch_to_tsquery` to
improve some behaviour.
The tests were hitting those edge-cases about handling of hanging double
quotes. This fixes the tests to take into account the PostgreSQL version.
1. `federation_client.timestamp_to_event(...)` now handles all `destination` looping and uses our generic `_try_destination_list(...)` helper.
2. Consistently handling `NotRetryingDestination` and `FederationDeniedError` across `get_pdu` , backfill, and the generic `_try_destination_list` which is used for many places we use this pattern.
3. `get_pdu(...)` now returns `PulledPduInfo` so we know which `destination` we ended up pulling the PDU from
Fixes check_avatar_size_and_mime_type() to successfully update avatars on homeservers running on non-default ports which it would mistakenly treat as remote homeserver while validating the avatar's size and mime type.
Signed-off-by: Ashish Kumar ashfame@users.noreply.github.com
Support a unified search query syntax which leverages more of the full-text
search of each database supported by Synapse.
Supports, with the same syntax across Postgresql 11+ and Sqlite:
- quoted "search terms"
- `AND`, `OR`, `-` (negation) operators
- Matching words based on their stem, e.g. searches for "dog" matches
documents containing "dogs".
This is achieved by
- If on postgresql 11+, pass the user input to `websearch_to_tsquery`
- If on sqlite, manually parse the query and transform it into the sqlite-specific
query syntax.
Note that postgresql 10, which is close to end-of-life, falls back to using
`phraseto_tsquery`, which only supports a subset of the features.
Multiple terms separated by a space are implicitly ANDed.
Note that:
1. There is no escaping of full-text syntax that might be supported by the database;
e.g. `NOT`, `NEAR`, `*` in sqlite. This runs the risk that people might discover this
as accidental functionality and depend on something we don't guarantee.
2. English text is assumed for stemming. To support other languages, either the target
language needs to be known at the time of indexing the message (via room metadata,
or otherwise), or a separate index for each language supported could be created.
Sqlite docs: https://www.sqlite.org/fts3.html#full_text_index_queries
Postgres docs: https://www.postgresql.org/docs/11/textsearch-controls.html
This implements a fake OIDC server, which intercepts calls to the HTTP client.
Improves accuracy of tests by covering more internal methods.
One particular example was the ID token validation, which previously mocked.
This uncovered an incorrect dependency: Synapse actually requires at least
authlib 0.15.1, not 0.14.0.
When the last event in a thread is redacted we need to update
the threads table:
* Find the new latest event in the thread and store it into the table; or
* Remove the thread from the table if it is no longer a thread (i.e. all
events in the thread were redacted).
* Show erasure status when listing users in the Admin API
* Use USING when joining erased_users
* Add changelog entry
* Revert "Use USING when joining erased_users"
This reverts commit 30bd2bf106415caadcfdbdd1b234ef2b106cc394.
* Make the erased check work on postgres
* Add a testcase for showing erased user status
* Appease the style linter
* Explicitly convert `erased` to bool to make SQLite consistent with Postgres
This also adds us an easy way in to fix the other accidentally integered columns.
* Move erasure status test to UsersListTestCase
* Include user erased status when fetching user info via the admin API
* Document the erase status in user_admin_api
* Appease the linter and mypy
* Signpost comments in tests
Co-authored-by: Tadeusz Sośnierz <tadeusz@sosnierz.com>
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
Fix MSC3030 `/timestamp_to_event` endpoint returning `outliers` that it has no idea whether are near a gap or not (and therefore unable to determine whether it's actually the closest event). The reason Synapse doesn't know whether an `outlier` is next to a gap is because our gap checks rely on entries in the `event_edges`, `event_forward_extremeties`, and `event_backward_extremities` tables which is [not the case for `outliers`](2c63cdcc3f/docs/development/room-dag-concepts.md (outliers)).
Also fixes MSC3030 Complement `can_paginate_after_getting_remote_event_from_timestamp_to_event_endpoint` test flake. Although this acted flakey in Complement, if `sync_partial_state` raced and beat us before `/timestamp_to_event`, then even if we retried the failing `/context` request it wouldn't work until we made this Synapse change. With this PR, Synapse will never return an `outlier` event so that test will always go and ask over federation.
Fix https://github.com/matrix-org/synapse/issues/13944
### Why did this fail before? Why was it flakey?
Sleuthing the server logs on the [CI failure](https://github.com/matrix-org/synapse/actions/runs/3149623842/jobs/5121449357#step:5:5805), it looks like `hs2:/timestamp_to_event` found `$NP6-oU7mIFVyhtKfGvfrEQX949hQX-T-gvuauG6eurU` as an `outlier` event locally. Then when we went and asked for it via `/context`, since it's an `outlier`, it was filtered out of the results -> `You don't have permission to access that event.`
This is reproducible when `sync_partial_state` races and persists `$NP6-oU7mIFVyhtKfGvfrEQX949hQX-T-gvuauG6eurU` as an `outlier` before we evaluate `get_event_for_timestamp(...)`. To consistently reproduce locally, just add a delay at the [start of `get_event_for_timestamp(...)`](cb20b885cb/synapse/handlers/room.py (L1470-L1496)) so it always runs after `sync_partial_state` completes.
```py
from twisted.internet import task as twisted_task
d = twisted_task.deferLater(self.hs.get_reactor(), 3.5)
await d
```
In a run where it passes, on `hs2`, `get_event_for_timestamp(...)` finds a different event locally which is next to a gap and we request from a closer one from `hs1` which gets backfilled. And since the backfilled event is not an `outlier`, it's returned as expected during `/context`.
With this PR, Synapse will never return an `outlier` event so that test will always go and ask over federation.
While https://github.com/matrix-org/synapse/pull/13635 stops us from doing the slow thing after we've already done it once, this PR stops us from doing one of the slow things in the first place.
Related to
- https://github.com/matrix-org/synapse/issues/13622
- https://github.com/matrix-org/synapse/pull/13635
- https://github.com/matrix-org/synapse/issues/13676
Part of https://github.com/matrix-org/synapse/issues/13356
Follow-up to https://github.com/matrix-org/synapse/pull/13815 which tracks event signature failures.
With this PR, we avoid the call to the costly `_get_state_ids_after_missing_prev_event` because the signature failure will count as an attempt before and we filter events based on the backoff before calling `_get_state_ids_after_missing_prev_event` now.
For example, this will save us 156s out of the 185s total that this `matrix.org` `/messages` request. If you want to see the full Jaeger trace of this, you can drag and drop this `trace.json` into your own Jaeger, https://gist.github.com/MadLittleMods/4b12d0d0afe88c2f65ffcc907306b761
To explain this exact scenario around `/messages` -> backfill, we call `/backfill` and first check the signatures of the 100 events. We see bad signature for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` and `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` (both member events). Then we process the 98 events remaining that have valid signatures but one of the events references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event`. So we have to do the whole `_get_state_ids_after_missing_prev_event` rigmarole which pulls in those same events which fail again because the signatures are still invalid.
- `backfill`
- `outgoing-federation-request` `/backfill`
- `_check_sigs_and_hash_and_fetch`
- `_check_sigs_and_hash_and_fetch_one` for each event received over backfill
- ❗ `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- ❗ `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- `_process_pulled_events`
- `_process_pulled_event` for each validated event
- ❗ Event `$Q0iMdqtz3IJYfZQU2Xk2WjB5NDF8Gg8cFSYYyKQgKJ0` references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event` which is missing so we try to get it
- `_get_state_ids_after_missing_prev_event`
- `outgoing-federation-request` `/state_ids`
- ❗ `get_pdu` for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` which fails the signature check again
- ❗ `get_pdu` for `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` which fails the signature check
The root node of a thread (and events related to it) are considered
"part of a thread" when validating receipts. This allows clients which
show the root node in both the main timeline and the threaded timeline
to easily send receipts in either.
Note that threaded notifications are not created for these events, these
events created notifications on the main timeline.
The callers either set a default limit or manually handle a None-limit
later on (by setting a default value).
Update the callers to always instantiate PaginationConfig with a default
limit and then assume the limit is non-None.
Stabilize the threads API (MSC3856) by supporting (only) the v1
path for the endpoint.
This also marks the API as safe for workers since it is a read-only
API.
Implement the /threads endpoint from MSC3856.
This is currently unstable and behind an experimental configuration
flag.
It includes a background update to backfill data, results from
the /threads endpoint will be partial until that finishes.
