When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join
rules.
This only applies to an experimental room version, as defined in MSC3083.
This basically speeds up federation by "squeezing" each individual dual database call (to destinations and destination_rooms), which previously happened per every event, into one call for an entire batch (100 max).
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
This change ensures that the appservice registration behaviour follows the spec. We decided to do this for Dendrite, so it made sense to also make a PR for synapse to correct the behaviour.
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
We pull all destinations requiring catchup from the DB in batches.
However, if all those destinations get filtered out (due to the
federation sender being sharded), then the `last_processed` destination
doesn't get updated, and we keep requesting the same set repeatedly.
When joining a room with join rules set to 'restricted', check if the
user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
This PR modifies `GaugeBucketCollector` to only report data once it has been updated, rather than initially reporting a value of 0. Fixes zero values being reported for some metrics on startup until a background job to update the metric's value runs later.
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
The `remote_media_cache_thumbnails_media_origin_media_id_thumbna_key`
constraint is superceded by
`remote_media_repository_thumbn_media_origin_id_width_height_met` (which adds
`thumbnail_method` to the unique key).
PR #7124 made an attempt to remove the old constraint, but got the name wrong,
so it didn't work. Here we update the bg update and rerun it.
Fixes#8649.
The regex should be terminated so that subdomain matches of another
domain are not accepted. Just ensuring that someone doesn't shoot
themselves in the foot by copying our example.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
I've reiterated the advice about using `oidc` to migrate, since I've seen a few
people caught by this.
I've also removed a couple of the examples as they are duplicating the OIDC
documentation, and I think they might be leading people astray.
If you have the wrong version of `cryptography` installed, synapse suggests:
```
To install run:
pip install --upgrade --force 'cryptography>=3.4.7;python_version>='3.6''
```
However, the use of ' inside '...' doesn't work, so when you run this, you get
an error.
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Split off from https://github.com/matrix-org/synapse/pull/9491
Adds a storage method for getting the current presence of all local users, optionally excluding those that are offline. This will be used by the code in #9491 when a PresenceRouter module informs Synapse that a given user should have `"ALL"` user presence updates routed to them. Specifically, it is used here: b588f16e39/synapse/handlers/presence.py (L1131-L1133)
Note that there is a `get_all_presence_updates` function just above. That function is intended to walk up the table through stream IDs, and is primarily used by the presence replication stream. I could possibly make use of it in the PresenceRouter-related code, but it would be a bit of a bodge.
Builds on the work done in #9643 to add a federation API for space summaries.
There's a bit of refactoring of the existing client-server code first, to avoid too much duplication.
Currently federation catchup will send the last *local* event that we
failed to send to the remote. This can cause issues for large rooms
where lots of servers have sent events while the remote server was down,
as when it comes back up again it'll be flooded with events from various
points in the DAG.
Instead, let's make it so that all the servers send the most recent
events, even if its not theirs. The remote should deduplicate the
events, so there shouldn't be much overhead in doing this.
Alternatively, the servers could only send local events if they were
also extremities and hope that the other server will send the event
over, but that is a bit risky.
This bug was discovered by DINUM. We were modifying `serialized_event["content"]`, which - if you've got `USE_FROZEN_DICTS` turned on or are [using a third party rules module](17cd48fe51/synapse/events/third_party_rules.py (L73-L76)) - will raise a 500 if you try to a edit a reply to a message.
`serialized_event["content"]` could be set to the edit event's content, instead of a copy of it, which is bad as we attempt to modify it. Instead, we also end up modifying the original event's content. DINUM uses a third party rules module, which meant the event's content got frozen and thus an exception was raised.
To be clear, the problem is not that the event's content was frozen. In fact doing so helped us uncover the fact we weren't copying event content correctly.
We had two functions named `get_forward_extremities_for_room` and
`get_forward_extremeties_for_room` that took different paramters. We
rename one of them to avoid confusion.
* Populate `internal_metadata.outlier` based on `events` table
Rather than relying on `outlier` being in the `internal_metadata` column,
populate it based on the `events.outlier` column.
* Move `outlier` out of InternalMetadata._dict
Ultimately, this will allow us to stop writing it to the database. For now, we
have to grandfather it back in so as to maintain compatibility with older
versions of Synapse.
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
Federation catch up mode is very inefficient if the number of events
that the remote server has missed is small, since handling gaps can be
very expensive, c.f. #9492.
Instead of going into catch up mode whenever we see an error, we instead
do so only if we've backed off from trying the remote for more than an
hour (the assumption being that in such a case it is more than a
transient failure).
Background: When we receive incoming federation traffic, and notice that we are missing prev_events from
the incoming traffic, first we do a `/get_missing_events` request, and then if we still have missing prev_events,
we set up new backwards-extremities. To do that, we need to make a `/state_ids` request to ask the remote
server for the state at those prev_events, and then we may need to then ask the remote server for any events
in that state which we don't already have, as well as the auth events for those missing state events, so that we
can auth them.
This PR attempts to optimise the processing of that state request. The `state_ids` API returns a list of the state
events, as well as a list of all the auth events for *all* of those state events. The optimisation comes from the
observation that we are currently loading all of those auth events into memory at the start of the operation, but
we almost certainly aren't going to need *all* of the auth events. Rather, we can check that we have them, and
leave the actual load into memory for later. (Ideally the federation API would tell us which auth events we're
actually going to need, but it doesn't.)
The effect of this is to reduce the number of events that I need to load for an event in Matrix HQ from about
60000 to about 22000, which means it can stay in my in-memory cache, whereas previously the sheer number
of events meant that all 60K events had to be loaded from db for each request, due to the amount of cache
churn. (NB I've already tripled the size of the cache from its default of 10K).
Unfortunately I've ended up basically C&Ping `_get_state_for_room` and `_get_events_from_store_or_dest` into
a new method, because `_get_state_for_room` is also called during backfill, which expects the auth events to be
returned, so the same tricks don't work. That said, I don't really know why that codepath is completely different
(ultimately we're doing the same thing in setting up a new backwards extremity) so I've left a TODO suggesting
that we clean it up.
We either need to pass the auth provider over the replication api, or make sure
we report the auth provider on the worker that received the request. I've gone
with the latter.
This great big stack of commits is a a whole load of hoop-jumping to make it easier to store additional values in login tokens, and then to actually store the SSO Identity Provider in the login token. (Making use of that data will follow in a subsequent PR.)
Turns out matrix.org has an event that has duplicate auth events (which really isn't supposed to happen, but here we are). This caused the background update to fail due to `UniqueViolation`.
It landed in schema version 58 after 59 had been created, causing some
servers to not run it. The main effect of was that not all rooms had
their chain cover calculated correctly. After the BG updates complete
the chain covers will get fixed when a new state event in the affected
rooms is received.
In #75, bytecode was disabled (from a bit of FUD back in `python<2.4` days, according to dev chat), I think it's safe enough to enable it again.
Added in `__pycache__/` and `.pyc`/`.pyd` to `.gitignore`, to extra-insure compiled files don't get committed.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
### Changes proposed in this PR
- Add support for the `no_proxy` and `NO_PROXY` environment variables
- Internally rely on urllib's [`proxy_bypass_environment`](bdb941be42/Lib/urllib/request.py (L2519))
- Extract env variables using urllib's `getproxies`/[`getproxies_environment`](bdb941be42/Lib/urllib/request.py (L2488)) which supports lowercase + uppercase, preferring lowercase, except for `HTTP_PROXY` in a CGI environment
This does contain behaviour changes for consumers so making sure these are called out:
- `no_proxy`/`NO_PROXY` is now respected
- lowercase `https_proxy` is now allowed and taken over `HTTPS_PROXY`
Related to #9306 which also uses `ProxyAgent`
Signed-off-by: Timothy Leung tim95@hotmail.co.uk
This fixes#8518 by adding a conditional check on `SyncResult` in a function when `prev_stream_token == current_stream_token`, as a sanity check. In `CachedResponse.set.<remove>()`, the result is immediately popped from the cache if the conditional function returns "false".
This prevents the caching of a timed-out `SyncResult` (that has `next_key` as the stream key that produced that `SyncResult`). The cache is prevented from returning a `SyncResult` that makes the client request the same stream key over and over again, effectively making it stuck in a loop of requesting and getting a response immediately for as long as the cache keeps those values.
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
* Split ShardedWorkerHandlingConfig
This is so that we have a type level understanding of when it is safe to
call `get_instance(..)` (as opposed to `should_handle(..)`).
* Remove special cases in ShardedWorkerHandlingConfig.
`ShardedWorkerHandlingConfig` tried to handle the various different ways
it was possible to configure federation senders and pushers. This led to
special cases that weren't hit during testing.
To fix this the handling of the different cases is moved from there and
`generic_worker` into the worker config class. This allows us to have
the logic in one place and allows the rest of the code to ignore the
different cases.
The idea here is to stop people forgetting to call `check_consistency`. Folks can still just pass in `None` to the new args in `build_sequence_generator`, but hopefully they won't.
This PR remove the cache for the `get_shared_rooms_for_users` storage method (the db method driving the experimental "what rooms do I share with this user?" feature: [MSC2666](https://github.com/matrix-org/matrix-doc/pull/2666)). Currently subsequent requests to the endpoint will return the same result, even if your shared rooms with that user have changed.
The cache was added in https://github.com/matrix-org/synapse/pull/7785, but we forgot to ensure it was invalidated appropriately.
Upon attempting to invalidate it, I found that the cache had to be entirely invalidated whenever a user (remote or local) joined or left a room. This didn't make for a very useful cache, especially for a function that may or may not be called very often. Thus, I've opted to remove it instead of invalidating it.
This PR attempts to eliminate unnecessary presence sending work when your local server joins a room, or when a remote server joins a room your server is participating in by processing state deltas in chunks rather than individually.
---
When your server joins a room for the first time, it requests the historical state as well. This chunk of new state is passed to the presence handler which, after filtering that state down to only membership joins, will send presence updates to homeservers for each join processed.
It turns out that we were being a bit naive and processing each event individually, and sending out presence updates for every one of those joins. Even if many different joins were users on the same server (hello IRC bridges), we'd send presence to that same homeserver for every remote user join we saw.
This PR attempts to deduplicate all of that by processing the entire batch of state deltas at once, instead of only doing each join individually. We process the joins and note down which servers need which presence:
* If it was a local user join, send that user's latest presence to all servers in the room
* If it was a remote user join, send the presence for all local users in the room to that homeserver
We deduplicate by inserting all of those pending updates into a dictionary of the form:
```
{
server_name1: {presence_update1, ...},
server_name2: {presence_update1, presence_update2, ...}
}
```
Only after building this dict do we then start sending out presence updates.
This PR adds a homeserver config option, `user_directory.prefer_local_users`, that when enabled will show local users higher in user directory search results than remote users. This option is off by default.
Note that turning this on doesn't necessarily mean that remote users will always be put below local users, but they should be assuming all other ranking factors (search query match, profile information present etc) are identical.
This is useful for, say, University networks that are openly federating, but want to prioritise local students and staff in the user directory over other random users.
Add off-by-default configuration settings to:
- disable putting an invitee's profile info in invite events
- disable profile lookup via federation
Signed-off-by: Andrew Ferrazzutti <fair@miscworks.net>
This reduces the memory usage of previewing media files which
end up larger than the `max_spider_size` by avoiding buffering
content internally in treq.
It also checks the `Content-Length` header in additional places
instead of streaming the content to check the body length.
This is a small bug that I noticed while working on #8956.
We have a for-loop which attempts to strip all presence changes for each user except for the final one, as we don't really care about older presence:
9e19c6aab4/synapse/handlers/presence.py (L368-L371)
`new_states_dict` stores this stripped copy of latest presence state for each user, before it is... put into a new variable `new_state`, which is just overridden by the subsequent for loop.
I believe this was instead meant to override `new_states`. Without doing so, it effectively meant:
1. The for loop had no effect.
2. We were still processing old presence state for users.
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
-----BEGIN PGP SIGNATURE-----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=NSyp
-----END PGP SIGNATURE-----
Merge tag 'v1.27.0rc2' into develop
Synapse 1.27.0rc2 (2021-02-11)
==============================
Features
--------
- Further improvements to the user experience of registration via single sign-on. ([\#9297](https://github.com/matrix-org/synapse/issues/9297))
Bugfixes
--------
- Fix ratelimiting introduced in v1.27.0rc1 for invites to respect the `ratelimit` flag on application services. ([\#9302](https://github.com/matrix-org/synapse/issues/9302))
- Do not automatically calculate `public_baseurl` since it can be wrong in some situations. Reverts behaviour introduced in v1.26.0. ([\#9313](https://github.com/matrix-org/synapse/issues/9313))
Improved Documentation
----------------------
- Clarify the sample configuration for changes made to the template loading code. ([\#9310](https://github.com/matrix-org/synapse/issues/9310))
Remove conflicting sqlite tables that throw sqlite3.OperationalError: object name reserved for internal use: event_search_content when running the twisted unit tests.
Fix#8996
Fixes some exceptions if the room state isn't quite as expected.
If the expected state events aren't found, try to find them in the
historical room state. If they still aren't found, fallback to a reasonable,
although ugly, value.
This could arguably replace the existing admin API for `/members`, however that is out of scope of this change.
This sort of endpoint is ideal for moderation use cases as well as other applications, such as needing to retrieve various bits of information about a room to perform a task (like syncing power levels between two places). This endpoint exposes nothing more than an admin would be able to access with a `select *` query on their database.
* Fixes a case where no summary text was returned.
* The use of messages_from_person vs. messages_from_person_and_others
was tweaked to depend on whether there was 1 sender or multiple senders,
not based on if there was 1 room or multiple rooms.
Context, Fixes: https://github.com/matrix-org/synapse/issues/9263
In the past to fix an issue with old Riots re-requesting threepid validation tokens, we raised a `LoginError` during UIA instead of `InteractiveAuthIncompleteError`. This is now breaking the way Tchap logs in - which isn't standard, but also isn't disallowed by the spec.
An easy fix is just to remove the 4 year old workaround.
There's some prelimiary work here to pull out the construction of a jinja environment to a separate function.
I wanted to load the template at display time rather than load time, so that it's easy to update on the fly. Honestly, I think we should do this with all our templates: the risk of ending up with malformed templates is far outweighed by the improved turnaround time for an admin trying to update them.
Fixes#8966.
* Factor out build_synapse_client_resource_tree
Start a function which will mount resources common to all workers.
* Move sso init into build_synapse_client_resource_tree
... so that we don't have to do it for each worker
* Fix SSO-login-via-a-worker
Expose the SSO login endpoints on workers, like the documentation says.
* Update workers config for new endpoints
Add documentation for endpoints recently added (#8942, #9017, #9262)
* remove submit_token from workers endpoints list
this *doesn't* work on workers (yet).
* changelog
* Add a comment about the odd path for SAML2Resource
There are going to be a couple of paths to get to the final step of SSO reg, and I want the URL in the browser to consistent. So, let's move the final step onto a separate path, which we redirect to.
* synapse.app.base: only call gc.freeze() on CPython
gc.freeze() is an implementation detail of CPython garbage collector,
and notably does not exist on PyPy.
Rather than playing whack-a-mole and skipping the call when under PyPy,
simply restrict it to CPython because the whole gc module is
implementation-defined.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
We've decided to add a 'brand' field to help clients decide how to style the
buttons.
Also, fix up the allowed characters for idp_id, while I'm in the area.
If a Synapse module's config block were empty in YAML, thus being translated to a `Nonetype` in Python, then some modules could fail as that None ends up getting passed to their `parse_config` method. Modules are expected to accept a `dict` instead.
This PR ensures that if the user does end up specifying an empty config block (such as what [the default oidc config in the sample config](5310808d3b/docs/sample_config.yaml (L1816-L1845)) states) then `None` is not passed to the module. An empty dict is passed instead.
This code assumes that no existing modules are relying on receiving a `None` config block, but I'd really hope that they aren't.
Treat unknown encodings (according to lxml) as UTF-8
when generating a preview for HTML documents. This
isn't fully accurate, but will hopefully give a reasonable
title and summary.
This is done by creating a custom `RedisFactory` subclass that
periodically pings all connections in its pool.
We also ensure that the `replyTimeout` param is non-null, so that we
timeout waiting for the reply to those pings (and thus triggering a
reconnect).
This expands the current shadow-banning feature to be usable via
the admin API and adds documentation for it.
A shadow-banned users receives successful responses to their
client-server API requests, but the events are not propagated into rooms.
Shadow-banning a user should be used as a tool of last resort and may lead
to confusing or broken behaviour for the client.
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
-----BEGIN PGP SIGNATURE-----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=Qc7+
-----END PGP SIGNATURE-----
Merge tag 'v1.26.0rc2' into social_login
Synapse 1.26.0rc2 (2021-01-25)
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
-----BEGIN PGP SIGNATURE-----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=Qc7+
-----END PGP SIGNATURE-----
Merge tag 'v1.26.0rc2' into develop
Synapse 1.26.0rc2 (2021-01-25)
==============================
Bugfixes
--------
- Fix receipts and account data not being sent down sync. Introduced in v1.26.0rc1. ([\#9193](https://github.com/matrix-org/synapse/issues/9193), [\#9195](https://github.com/matrix-org/synapse/issues/9195))
- Fix chain cover update to handle events with duplicate auth events. Introduced in v1.26.0rc1. ([\#9210](https://github.com/matrix-org/synapse/issues/9210))
Internal Changes
----------------
- Add an `oidc-` prefix to any `idp_id`s which are given in the `oidc_providers` configuration. ([\#9189](https://github.com/matrix-org/synapse/issues/9189))
- Bump minimum `psycopg2` version to v2.8. ([\#9204](https://github.com/matrix-org/synapse/issues/9204))
If no thumbnail of the requested type exists, return a 404 instead
of erroring. This doesn't quite match the spec (which does not define
what happens if no thumbnail can be found), but is consistent with
what Synapse already does.
We have seen a failure mode here where if there are many in flight
unfinished IDs then marking an ID as finished takes a lot of CPU (as
calling deque.remove iterates over the list)
Introduced in #9104
This wasn't picked up by the tests as this is all fine the first time you run Synapse (after upgrading), but then when you restart the wrong value is pulled from `stream_positions`.
* Factor out a common TestHtmlParser
Looks like I'm doing this in a few different places.
* Improve OIDC login test
Complete the OIDC login flow, rather than giving up halfway through.
* Ensure that OIDC login works with multiple OIDC providers
* Fix bugs in handling clientRedirectUrl
- don't drop duplicate query-params, or params with no value
- allow utf-8 in query-params
We do this by allowing a single iteration to process multiple rooms at a
time, as there are often a lot of really tiny rooms, which can massively
slow things down.
This is the final step for supporting multiple OIDC providers concurrently.
First of all, we reorganise the config so that you can specify a list of OIDC providers, instead of a single one. Before:
oidc_config:
enabled: true
issuer: "https://oidc_provider"
# etc
After:
oidc_providers:
- idp_id: prov1
issuer: "https://oidc_provider"
- idp_id: prov2
issuer: "https://another_oidc_provider"
The old format is still grandfathered in.
With that done, it's then simply a matter of having OidcHandler instantiate a new OidcProvider for each configured provider.
Protecting media stops it from being quarantined when
e.g. all media in a room is quarantined. This is useful
for sticker packs and other media that is uploaded by
server administrators, but used by many people.
`distutils` is pretty much deprecated these days, and replaced with
`setuptools`. It's also annoying because it's you can't `pip install` it, and
it's hard to figure out which debian package we should depend on to make sure
it's there.
Since we only use it for a tiny function anyway, let's just vendor said
function into our codebase.
Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
A reactor was being passed instead of a whitelist for the BlacklistingAgentWrapper
used by the WellyKnownResolver. This coulld cause exceptions when attempting to
connect to IP addresses that are blacklisted, but in reality this did not have any
observable affect since this code is not used for IP literals.
If a user tries to do UI Auth via SSO, but uses the wrong account on the SSO
IdP, try to give them a better error.
Previously, the UIA would claim to be successful, but then the operation in
question would simply fail with "auth fail". Instead, serve up an error page
which explains the failure.
This checks that the domain given to `DomainSpecificString.is_valid` (e.g.
`UserID`, `RoomAlias`, etc.) is of a valid form. Previously some validation
was done on the localpart (e.g. the sigil), but not the domain portion.
Some light refactoring of OidcHandler, in preparation for bigger things:
* remove inheritance from deprecated BaseHandler
* add an object to hold the things that go into a session cookie
* factor out a separate class for manipulating said cookies
If we have integrations with multiple identity providers, when the user does a UI Auth, we need to redirect them to the right one.
There are a few steps to this. First of all we actually need to store the userid of the user we are trying to validate in the UIA session, since the /auth/sso/fallback/web request is unauthenticated.
Then, once we get the /auth/sso/fallback/web request, we can fish the user id out of the session, and use it to look up the external id mappings, and hence pick an SSO provider for them.
SynapseRequest is in danger of becoming a bit of a dumping-ground for "useful stuff relating to Requests",
which isn't really its intention (its purpose is to override render, finished and connectionLost to set up the
LoggingContext and write the right entries to the request log).
Putting utility functions inside SynapseRequest means that lots of our code ends up requiring a
SynapseRequest when there is nothing synapse-specific about the Request at all, and any old
twisted.web.iweb.IRequest will do. This increases code coupling and makes testing more difficult.
In short: move get_user_agent out to a utility function.
You can't continue using a transaction once an exception has been
raised, so catching and dropping the error here is pointless and just
causes more errors.
GET /_synapse/admin/v1/rooms/<identifier>/forward_extremities now gets forward extremities for a room, returning count and the list of extremities.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* Implement CasHandler.handle_redirect_request
... to make it match OidcHandler and SamlHandler
* Clean up interface for OidcHandler.handle_redirect_request
Make it accept `client_redirect_url=None`.
* Clean up interface for `SamlHandler.handle_redirect_request`
... bring it into line with CAS and OIDC by making it take a Request parameter,
move the magic for `client_redirect_url` for UIA into the handler, and fix the
return type to be a `str` rather than a `bytes`.
* Define a common protocol for SSO auth provider impls
* Give SsoIdentityProvider an ID and register them
* Combine the SSO Redirect servlets
Now that the SsoHandler knows about the identity providers, we can combine the
various *RedirectServlets into a single implementation which delegates to the
right IdP.
* changelog
This adds an admin API that allows a server admin to get power in a room if a local user has power in a room. Will also invite the user if they're not in the room and its a private room. Can specify another user (rather than the admin user) to be granted power.
Co-authored-by: Matthew Hodgson <matthew@matrix.org>
This had two effects 1) it'd give the wrong answer and b) would iterate
*all* power levels in the auth chain of each event. The latter of which
can be *very* expensive for certain types of IRC bridge rooms that have
large numbers of power level changes.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
Fixes a bug that deactivated users appear in the directory when their profile information was updated.
To change profile information of deactivated users is neccesary for example you will remove displayname or avatar.
But they should not appear in directory. They are deactivated.
Co-authored-by: Erik Johnston <erikj@jki.re>
This is another part of my work towards fixing #8876. It moves some of the logic currently in the SAML and OIDC handlers - in particular the call to `AuthHandler.complete_sso_login` down into the `SsoHandler`.
* move simple_async_mock to test_utils
... so that it can be re-used
* Remove references to `SamlHandler._map_saml_response_to_user` from tests
This method is going away, so we can no longer use it as a test point. Instead,
factor out a higher-level method which takes a SAML object, and verify correct
behaviour by mocking out `AuthHandler.complete_sso_login`.
* changelog
* Factor out _call_attribute_mapper and _register_mapped_user
This is mostly an attempt to simplify `get_mxid_from_sso`.
* Move mapping_lock down into SsoHandler.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
* SsoHandler: remove inheritance from BaseHandler
* Simplify the flow for SSO UIA
We don't need to do all the magic for mapping users when we are doing UIA, so
let's factor that out.
* Call set_avatar_url with target_user, not user_id
Fixes https://github.com/matrix-org/synapse/issues/8871
* Create 8872.bugfix
* Update synapse/rest/admin/users.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Testing
* Update changelog.d/8872.bugfix
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
-----BEGIN PGP SIGNATURE-----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=is1Y
-----END PGP SIGNATURE-----
Merge tag 'v1.24.0rc2' into develop
Synapse 1.24.0rc2 (2020-12-04)
==============================
Bugfixes
--------
- Fix a regression in v1.24.0rc1 which failed to allow SAML mapping providers which were unable to redirect users to an additional page. ([\#8878](https://github.com/matrix-org/synapse/issues/8878))
Internal Changes
----------------
- Add support for the `prometheus_client` newer than 0.9.0. Contributed by Jordan Bancino. ([\#8875](https://github.com/matrix-org/synapse/issues/8875))
This removes the version pin of the `prometheus_client` dependency, in direct response to #8831. If merged, this will close#8831
As far as I can tell, no other changes are needed, but as I'm no synapse expert, I'm relying heavily on CI and maintainer reviews for this. My very primitive test of synapse with prometheus_client v0.9.0 on my home server didn't bring up any issues, so we'll see what happens.
Signed-off-by: Jordan Bancino
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
It's important that we make sure our background updates happen in a defined
order, to avoid disasters like #6923.
Add an ordering to all of the background updates that have landed since #7190.
This applies even if the feature is disabled at the server level with `allow_per_room_profiles`.
The server notice not being a real user it doesn't have an user profile.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
This PR grew out of #6739, and adds typing to some method arguments
You'll notice that there are a lot of `# type: ignores` in here. This is due to the base methods not matching the overloads here. This is necessary to stop mypy complaining, but a better solution is #8828.
We can get a SIGHUP at any point, including times where we are not in a
sane state. By deferring calling the handlers until the next reactor
tick we ensure that we don't get unexpected conflicts, e.g. trying to
flush logs from the signal handler while the code was in the process of
writing a log entry.
Fixes#8769.
When server URL provided to register_new_matrix_user includes path
component (e.g. "http://localhost:8008/"), the command fails with
"ERROR! Received 400 Bad Request". Stripping trailing slash from the
server_url command argument makes sure combined endpoint URL remains
valid.
Signed-off-by: Dmitry Borodaenko angdraug@debian.org
This is another PR that grew out of #6739.
The existing code for checking whether a user is currently invited to a room when they want to leave the room looks like the following:
f737368a26/synapse/handlers/room_member.py (L518-L540)
It calls `get_invite_for_local_user_in_room`, which will actually query *all* rooms the user has been invited to, before iterating over them and matching via the room ID. It will then return a tuple of a lot of information which we pull the event ID out of.
I need to do a similar check for knocking, but this code wasn't very efficient. I then tried to write a different implementation using `StateHandler.get_current_state` but this actually didn't work as we haven't *joined* the room yet - we've only been invited to it. That means that only certain tables in Synapse have our desired `invite` membership state. One of those tables is `local_current_membership`.
So I wrote a store method that just queries that table instead
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
* Make this line debug (it's noisy)
* Don't include from_key for presence if we are at 0
* Limit read receipts for all rooms to 100
* changelog.d/8744.bugfix
* Allow from_key to be None
* Update 8744.bugfix
* The from_key is superflous
* Update comment
`_locally_reject_invite` generates an out-of-band membership event which can be passed to clients, but not other homeservers.
This is used when we fail to reject an invite over federation. If this happens, we instead just generate a leave event locally and send it down /sync, allowing clients to reject invites even if we can't reach the remote homeserver.
A similar flow needs to be put in place for rescinding knocks. If we're unable to contact any remote server from the room we've tried to knock on, we'd still like to generate and store the leave event locally. Hence the need to reuse, and thus generalise, this method.
Separated from #6739.
There's a handy function called maybe_store_room_on_invite which allows us to create an entry in the rooms table for a room and its version for which we aren't joined to yet, but we can reference when ingesting events about.
This is currently used for invites where we receive some stripped state about the room and pass it down via /sync to the client, without us being in the room yet.
There is a similar requirement for knocking, where we will eventually do the same thing, and need an entry in the rooms table as well. Thus, reusing this function works, however its name needs to be generalised a bit.
Separated out from #6739.
The main use case is to see how many requests are being made, and how
many are second/third/etc attempts. If there are large number of retries
then that likely indicates a delivery problem.
This should hopefully speed up `get_auth_chain_difference` a bit in the case of repeated state res on the same rooms.
`get_auth_chain_difference` does a breadth first walk of the auth graphs by repeatedly looking up events' auth events. Different state resolutions on the same room will end up doing a lot of the same event to auth events lookups, so by caching them we should speed things up in cases of repeated state resolutions on the same room.
`adbapi.ConnectionPool` let's you turn on auto reconnect of DB connections. This is off by default.
As far as I can tell if its not enabled dead connections never get removed from the pool.
Maybe helps #8574
* Check support room has only two users
* Create 8728.bugfix
* Update synapse/server_notices/server_notices_manager.py
Co-authored-by: Erik Johnston <erik@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
This PR fixes two things:
* Corrects the copy/paste error of telling the client their displayname is wrong when they are submitting an `avatar_url`.
* Returns a `M_INVALID_PARAM` instead of `M_UNKNOWN` for non-str type parameters.
Reported by @t3chguy.
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
* Tie together matches_user_in_member_list and get_users_in_room
* changelog
* Remove type to fix mypy
* Add `on_invalidate` to the function signature in the hopes that may make things work well
* Remove **kwargs
* Update 8676.bugfix
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
Cached functions accept an `on_invalidate` function, which we failed to add to the type signature. It's rarely used in the files that we have typed, which is why we haven't noticed it before.
otherwise non-state events get written as `<FrozenEvent ... state_key='None'>`
which is indistinguishable from state events with the actual state_key `None`.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
Not being able to serialise `frozendicts` is fragile, and it's annoying to have
to think about which serialiser you want. There's no real downside to
supporting frozendicts, so let's just have one json encoder.
I was trying to make it so that we didn't have to start a background task when handling RDATA, but that is a bigger job (due to all the code in `generic_worker`). However I still think not pulling the event from the DB may help reduce some DB usage due to replication, even if most workers will simply go and pull that event from the DB later anyway.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
This is a requirement for [knocking](https://github.com/matrix-org/synapse/pull/6739), and is abstracting some code that was originally used by the invite flow. I'm separating it out into this PR as it's a fairly contained change.
For a bit of context: when you invite a user to a room, you send them [stripped state events](https://matrix.org/docs/spec/server_server/unstable#put-matrix-federation-v2-invite-roomid-eventid) as part of `invite_room_state`. This is so that their client can display useful information such as the room name and avatar. The same requirement applies to knocking, as it would be nice for clients to be able to display a list of rooms you've knocked on - room name and avatar included.
The reason we're sending membership events down as well is in the case that you are invited to a room that does not have an avatar or name set. In that case, the client should use the displayname/avatar of the inviter. That information is located in the inviter's membership event.
This is optional as knocks don't really have any user in the room to link up to. When you knock on a room, your knock is sent by you and inserted into the room. It wouldn't *really* make sense to show the avatar of a random user - plus it'd be a data leak. So I've opted not to send membership events to the client here. The UX on the client for when you knock on a room without a name/avatar is a separate problem.
In essence this is just moving some inline code to a reusable store method.
it seems to be possible that only one of them ends up to be cached.
when this was the case, the missing one was not fetched via federation,
and clients then failed to validate cross-signed devices.
Signed-off-by: Jonas Jelten <jj@sft.lol>
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
==============================
Bugfixes
--------
- Fix bugs where ephemeral events were not sent to appservices. Broke in v1.22.0rc1. ([\#8648](https://github.com/matrix-org/synapse/issues/8648), [\#8656](https://github.com/matrix-org/synapse/issues/8656))
- Fix `user_daily_visits` table to not have duplicate rows per user/device due to multiple user agents. Broke in v1.22.0rc1. ([\#8654](https://github.com/matrix-org/synapse/issues/8654))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAl+W6QIQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCR/EB/9Afs/QiqD7uJ7XtAASwlOxcpSrvB6xSMzU
VIiYLrUSCvHe8SwcPG6nToy69hHmwLBPu9e8gvlQkOY4nJpW9VTGvhFcP5eCgeKd
vDp+elVD6BPg+6S3RaI/F5hyQ7gn9qZ/WexkVixDkVs5eAL3gNlZcjw9RwaT9ei9
fEOYlMi1CRSRzKVBPMEFCAvOpJJ8rA/iq4JK7+P0TplkhD+HydG0cYr6OoL7CmaD
L/au565Ynp6o0hSpNpTFqW6C5W5JRvz/TyG9/N95h9+WqubZzsPPDUzh98B3eBoX
43Wu9Qoc3mNamf0++HbHGUPI8dRV1gssxL01hs/iLUZz7CxXY+Ir
=Z3sQ
-----END PGP SIGNATURE-----
Merge tag 'v1.22.0rc2' into develop
Synapse 1.22.0rc2 (2020-10-26)
==============================
Bugfixes
--------
- Fix bugs where ephemeral events were not sent to appservices. Broke in v1.22.0rc1. ([\#8648](https://github.com/matrix-org/synapse/issues/8648), [\#8656](https://github.com/matrix-org/synapse/issues/8656))
- Fix `user_daily_visits` table to not have duplicate rows per user/device due to multiple user agents. Broke in v1.22.0rc1. ([\#8654](https://github.com/matrix-org/synapse/issues/8654))
* Fix user_daily_visits to not have duplicate rows for UA.
Fixes#8641.
* Newsfile
* Fix typo.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
* Limit AS transactions to 100 events
* Update changelog.d/8606.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add tests
* Update synapse/appservice/scheduler.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add `DeferredCache.get_immediate` method
A bunch of things that are currently calling `DeferredCache.get` are only
really interested in the result if it's completed. We can optimise and simplify
this case.
* Remove unused 'default' parameter to DeferredCache.get()
* another get_immediate instance
* type annotations for LruCache
* changelog
* Apply suggestions from code review
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* review comments
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
Autocommit means that we don't wrap the functions in transactions, and instead get executed directly. Introduced in #8456. This will help:
1. reduce the number of `could not serialize access due to concurrent delete` errors that we see (though there are a few functions that often cause serialization errors that we don't fix here);
2. improve the DB performance, as it no longer needs to deal with the overhead of `REPEATABLE READ` isolation levels; and
3. improve wall clock speed of these functions, as we no longer need to send `BEGIN` and `COMMIT` to the DB.
Some notes about the differences between autocommit mode and our default `REPEATABLE READ` transactions:
1. Currently `autocommit` only applies when using PostgreSQL, and is ignored when using SQLite (due to silliness with [Twisted DB classes](https://twistedmatrix.com/trac/ticket/9998)).
2. Autocommit functions may get retried on error, which means they can get applied *twice* (or more) to the DB (since they are not in a transaction the previous call would not get rolled back). This means that the functions need to be idempotent (or otherwise not care about being called multiple times). Read queries, simple deletes, and updates/upserts that replace rows (rather than generating new values from existing rows) are all idempotent.
3. Autocommit functions no longer get executed in [`REPEATABLE READ`](https://www.postgresql.org/docs/current/transaction-iso.html) isolation level, and so data can change queries, which is fine for single statement queries.
We asserted that the IDs returned by postgres sequence was greater than
any we had seen, however this is technically racey as we may update the
current positions out of order.
We now assert that the sequences are correct on startup, so the
assertion is no longer really required, so we remove them.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEBTGR3/RnAzBGUif3pULk7RsPrAkFAl9+7JIQHGVyaWtAbWF0
cml4Lm9yZwAKCRClQuTtGw+sCUc1B/9Bz8uAEJWX9qahuWZGrsvj0ukF/9O6YWrU
ZZGHnyaAXg4MF0lR6DVCV2NhW/l3RWO01G/LgGT//0vac+EFxWDbjuaHP9pRVBln
02TQpn12ceZtW/n+X+8wmQzfSn1zNWRUycV43MyGu49z3IAG7KVjjVDQPkY0mEHC
h6THy30SYIOKDCdXUUL9i+sV1JLzKPX0NlzO3ONKe2LbfLiBTvdfDRlZGq6rJu5H
GAsIPwgadhanhXBPhG4WrealG31TkcPbZCwFMv9aFzltU841jps+QN6OKvbGFVer
FboD2df0ZJqKNJOJVVlOMs7I5uSYbrg+n1zolZfrbo0lk/xEyIAT
=F5cw
-----END PGP SIGNATURE-----
Merge tag 'v1.21.0rc3' into develop
Synapse 1.21.0rc3 (2020-10-08)
==============================
Bugfixes
--------
- Fix duplication of events on high traffic servers, caused by PostgreSQL `could not serialize access due to concurrent update` errors. ([\#8456](https://github.com/matrix-org/synapse/issues/8456))
Internal Changes
----------------
- Add Groovy Gorilla to the list of distributions we build `.deb`s for. ([\#8475](https://github.com/matrix-org/synapse/issues/8475))
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
Currently when using multiple event persisters we (in the worst case) don't tell clients about events until all event persisters have persisted new events after the original event. This is a suboptimal, especially if one of the event persisters goes down.
To handle this, we encode the position of each event persister in the room tokens so that we can send events to clients immediately. To reduce the size of the token we do two things:
1. We create a unique immutable persistent mapping between instance names and a generated small integer ID, which we can encode in the tokens instead of the instance name; and
2. We encode the "persisted upto position" of the room token and then only explicitly include instances that have positions strictly greater than that.
The new tokens look something like: `m3478~1.3488~2.3489`, where the first number is the min position, and the subsequent `-` separated pairs are the instance ID to positions map. (We use `.` and `~` as separators as they're URL safe and not already used by `StreamToken`).
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
There's no need for it to be in the dict as well as the events table. Instead,
we store it in a separate attribute in the EventInternalMetadata object, and
populate that on load.
This means that we can rely on it being correctly populated for any event which
has been persited to the database.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
#7124 changed the behaviour of remote thumbnails so that the thumbnailing method was included in the filename of the thumbnail. To support existing files, it included a fallback so that we would check the old filename if the new filename didn't exist.
Unfortunately, it didn't apply this logic to storage providers, so any thumbnails stored on such a storage provider was broken.
For negative streams we have to negate the internal stream ID before
querying the DB.
The effect of this bug was to query far too many rows, slowing start up
time, but we would correctly filter the results afterwards so there was
no ill effect.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
