For the record, the reason we need this is as follows:
each RDATA command comes down the redis pipe as a subscription message. txredisapi as written needs at least three reactor ticks to read each subscription message from the tcp buffer. Hence, once the process gets loaded, it starts getting behind, and eventually redis knifes the connection. it then takes ages for the master to work its way through the backlog, before it reconnects again, during which any commands from any workers are dropped.
An update of check-manifest shone some light on some issues with MANIFEST.in, specifically that we didn't ignore/prune the contrib directory, and that we were using prune instead of exclude for files. This fixes both issues.
Fixes#7403
We forgot to set the password on the subscriber connection, as well as
not calling super methods for overridden connectionMade/connectionLost
functions.
For in memory streams when fetching updates on workers we need to query the source of the stream, which currently is hard coded to be master. This PR threads through the source instance we received via `POSITION` through to the update function in each stream, which can then be passed to the replication client for in memory streams.
We move the processing of typing and federation replication traffic into their handlers so that `Stream.current_token()` points to a valid token. This allows us to remove `get_streams_to_replicate()` and `stream_positions()`.
By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
For direct TCP connections we need the master to relay REMOTE_SERVER_UP
commands to the other connections so that all instances get notified
about it. The old implementation just relayed to all connections,
assuming that sending back to the original sender of the command was
safe. This is not true for redis, where commands sent get echoed back to
the sender, which was causing master to effectively infinite loop
sending and then re-receiving REMOTE_SERVER_UP commands that it sent.
The fix is to ensure that we only relay to *other* connections and not
to the connection we received the notification from.
Fixes#7334.
* Factor out functions for injecting events into database
I want to add some more flexibility to the tools for injecting events into the
database, and I don't want to clutter up HomeserverTestCase with them, so let's
factor them out to a new file.
* Rework TestReplicationDataHandler
This wasn't very easy to work with: the mock wrapping was largely superfluous,
and it's useful to be able to inspect the received rows, and clear out the
received list.
* Fix AssertionErrors being thrown by EventsStream
Part of the problem was that there was an off-by-one error in the assertion,
but also the limit logic was too simple. Fix it all up and add some tests.
Specifically some tests for the typing stream, which means we test streams that fetch missing updates via HTTP (rather than via the DB).
We also shuffle things around a bit so that we create two separate `HomeServer` objects, rather than trying to insert a slaved store into places.
Note: `test_typing.py` is heavily inspired by `test_receipts.py`
It doesn't seem to be documented anywhere and means that you suddenly start losing metrics without any obvious reason when you go from monolith to workers (e.g. #7312).
If the admin adds a `.yaml` file that's either empty or doesn't parse into a dict to a config directory (e.g. `conf.d` for debs installs), stuff like https://github.com/matrix-org/synapse/issues/7322 would happen. This PR checks that the file is correctly parsed into a dict, or ignores it with a warning if it parses into any other type (including `None` for empty files).
Fixes https://github.com/matrix-org/synapse/issues/7322
Long story short: if we're handling presence on the current worker, we shouldn't be sending USER_SYNC commands over replication.
In an attempt to figure out what is going on here, I ended up refactoring some bits of the presencehandler code, so the first 4 commits here are non-functional refactors to move this code slightly closer to sanity. (There's still plenty to do here :/). Suggest reviewing individual commits.
Fixes (I hope) #7257.
==============================
Features
--------
- Always send users their own device updates. ([\#7160](https://github.com/matrix-org/synapse/issues/7160))
- Add support for handling GET requests for `account_data` on a worker. ([\#7311](https://github.com/matrix-org/synapse/issues/7311))
Bugfixes
--------
- Fix a bug that prevented cross-signing with users on worker-mode synapses. ([\#7255](https://github.com/matrix-org/synapse/issues/7255))
- Do not treat display names as globs in push rules. ([\#7271](https://github.com/matrix-org/synapse/issues/7271))
- Fix a bug with cross-signing devices belonging to remote users who did not share a room with any user on the local homeserver. ([\#7289](https://github.com/matrix-org/synapse/issues/7289))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl6gS+IACgkQOSor00I9
eP8CTwf+KLehHQMcrz0yoHN+/O86mpNv3Uz83BJ0qDIgezVbtqT7+ZwnK2Jb8dwM
zTcGRq5a6V+JLdfSTnXfrPzvAPt0WLaEENSAEGwZ6unqqxcG2PgATkRb0XtY8Rzh
Feu8WgJTnORbiiM3sBLI8toZMxal3X3ZcftPEAan1SaoyqLPQ2s14edDwgx64S5e
rBGzPDNSxZU1McNBq7Q11QTg3zgBUF+TYwyhnLbC5X1RdDwQpKhNZhwhYBS1yOD6
TsPjtlixC+HXb21Rmob7XY8VFxTBSBdUdtVQKAT4h3+l9bNFQLpBfDSVc7xkPiLt
/Gj+PL+YgY9xQDvHO2fVw8m4ololZw==
=p53e
-----END PGP SIGNATURE-----
Merge tag 'v1.12.4rc1' into develop
Synapse 1.12.4rc1 (2020-04-22)
==============================
Features
--------
- Always send users their own device updates. ([\#7160](https://github.com/matrix-org/synapse/issues/7160))
- Add support for handling GET requests for `account_data` on a worker. ([\#7311](https://github.com/matrix-org/synapse/issues/7311))
Bugfixes
--------
- Fix a bug that prevented cross-signing with users on worker-mode synapses. ([\#7255](https://github.com/matrix-org/synapse/issues/7255))
- Do not treat display names as globs in push rules. ([\#7271](https://github.com/matrix-org/synapse/issues/7271))
- Fix a bug with cross-signing devices belonging to remote users who did not share a room with any user on the local homeserver. ([\#7289](https://github.com/matrix-org/synapse/issues/7289))
First some background: StreamChangeCache is used to keep track of what "entities" have
changed since a given stream ID. So for example, we might use it to keep track of when the last
to-device message for a given user was received [1], and hence whether we need to pull any to-device messages from the database on a sync [2].
Now, it turns out that StreamChangeCache didn't support more than one thing being changed at
a given stream_id (this was part of the problem with #7206). However, it's entirely valid to send
to-device messages to more than one user at a time.
As it turns out, this did in fact work, because *some* methods of StreamChangeCache coped
ok with having multiple things changing on the same stream ID, and it seems we never actually
use the methods which don't work on the stream change caches where we allow multiple
changes at the same stream ID. But that feels horribly fragile, hence: let's update
StreamChangeCache to properly support this, and add some typing and some more tests while
we're at it.
[1]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L301
[2]: https://github.com/matrix-org/synapse/blob/release-v1.12.3/synapse/storage/data_stores/main/deviceinbox.py#L47-L51
Splitting based on the response code means we can avoid double logging here and identical information from line 164 while still logging at info if we don't get a good response and need to retry.
Other parts of the code (such as the StreamChangeCache) assume that there will
not be multiple changes with the same stream id.
This code was introduced in #7024, and I hope this fixes#7206.
Add changelog
Save retrieved keys to the db
lint
Fix and de-brittle remote result dict processing
Use query_user_devices instead, assume only master, self_signing key types
Make changelog more useful
Remove very specific exception handling
Wrap get_verify_key_from_cross_signing_key in a try/except
Note that _get_e2e_cross_signing_verify_key can raise a SynapseError
lint
Add comment explaining why this is useful
Only fetch master and self_signing key types
Fix log statements, docstrings
Remove extraneous items from remote query try/except
lint
Factor key retrieval out into a separate function
Send device updates, modeled after SigningKeyEduUpdater._handle_signing_key_updates
Update method docstring
The general idea here is to get rid of the type: ignore annotations on all of the current_token and update_function assignments, which would have caught #7290.
After a bit of experimentation, it seems like the least-awful way to do this is to pass the offending functions in as parameters to the Stream constructor. Unfortunately that means that the concrete implementations no longer have the same constructor signature as Stream itself, which means that it gets hard to correctly annotate STREAMS_MAP.
I've also introduced a couple of new types, to take out some duplication.
Some of the query functions return generators rather than lists, so we can't
index into the result. Happily we already have a copy of the results.
(think this was introduced in #7024)
I don't really remember why this was so complicated; I think it dates
back to the time when we had to instantiate the Config classes before
we could call `add_arguments` - ie before #5597. In any case, I don't
think there's a good reason for it any more, and the impact of it
being complicated is that `--help` doesn't work correctly.
We pass --daemonize on the commandline, which (since at least #4853) overrides
whatever the config file, so there is no need for it to be set in the config
file.
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
Fixes#6815
Before figuring out whether we should alert a user on MAU, we call get_notice_room_for_user to get some info on the existing server notices room for this user. This function, if the room doesn't exist, creates it and invites the user in it. This means that, if we decide later that no server notice is needed, the user gets invited in a room with no message in it. This happens at every restart of the server, since the room ID returned by get_notice_room_for_user is cached.
This PR fixes that by moving the inviting bit to a dedicated function, that's only called when the server actually needs to send a notice to the user. A potential issue with this approach is that the room that's created by get_notice_room_for_user doesn't match how that same function looks for an existing room (i.e. it creates a room that doesn't have an invite or a join for the current user in it, so it could lead to a new room being created each time a user syncs), but I'm not sure this is a problem given it's cached until the server restarts, so that function won't run very often.
It also renames get_notice_room_for_user into get_or_create_notice_room_for_user to make what it does clearer.
Occasionally we could get a federation device list update transaction which
looked like:
```
[
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D2', 'prev_id': [], 'stream_id': 12, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D1', 'prev_id': [12], 'stream_id': 11, 'deleted': True}},
{'edu_type': 'm.device_list_update', 'content': {'user_id': '@user:test', 'device_id': 'D3', 'prev_id': [11], 'stream_id': 13, 'deleted': True}}
]
```
Having `stream_ids` which are lower than `prev_ids` looks odd. It might work
(I'm not actually sure), but in any case it doesn't seem like a reasonable
thing to expect other implementations to support.
This broke in a recent PR (#7024) and is no longer useful due to all
replication clients implicitly subscribing to all streams, so let's
just remove it.
If there was an exception setting up one of the attributes of the Homeserver
god object, then future attempts to fetch that attribute would raise a
confusing "Cyclic dependency" error. Let's make sure that we clear the
`building` flag so that we just get the original exception.
Ref: #7169
* Remove `conn_id` usage for UserSyncCommand.
Each tcp replication connection is assigned a "conn_id", which is used
to give an ID to a remotely connected worker. In a redis world, there
will no longer be a one to one mapping between connection and instance,
so instead we need to replace such usages with an ID generated by the
remote instances and included in the replicaiton commands.
This really only effects UserSyncCommand.
* Add CLEAR_USER_SYNCS command that is sent on shutdown.
This should help with the case where a synchrotron gets restarted
gracefully, rather than rely on 5 minute timeout.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
* Don't show the login forms if we're currently logging in with a
password or a token.
* Submit directly the SSO login form, showing only a spinner to the
user, in order to eliminate from the clunkiness of SSO through this
fallback.
* change debian package from python3-virtualenv to virtualenv
The virtualenv package is needed for the virtualenv command. The
virtualenv package depends on python3-virtualenv (at least since
debian jessie) so there is no need to specify python3-virtualenv
additionally.
Signed-off-by: Vieno Hakkerinen <vieno@hakkerinen.eu>
* Add changelog
Co-authored-by: Andrew Morgan <andrew@amorgan.xyz>
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
* Pull Sentinel out of LoggingContext
... and drop a few unnecessary references to it
* Factor out LoggingContext.current_context
move `current_context` and `set_context` out to top-level functions.
Mostly this means that I can more easily trace what's actually referring to
LoggingContext, but I think it's generally neater.
* move copy-to-parent into `stop`
this really just makes `start` and `stop` more symetric. It also means that it
behaves correctly if you manually `set_log_context` rather than using the
context manager.
* Replace `LoggingContext.alive` with `finished`
Turn `alive` into `finished` and make it a bit better defined.
* Add 'device_lists_outbound_pokes' as extra table.
This makes sure we check all the relevant tables to get the current max
stream ID.
Currently not doing so isn't problematic as the max stream ID in
`device_lists_outbound_pokes` is the same as in `device_lists_stream`,
however that will change.
* Change device lists stream to have one row per id.
This will make it possible to process the streams more incrementally,
avoiding having to process large chunks at once.
* Change device list replication to match new semantics.
Instead of sending down batches of user ID/host tuples, send down a row
per entity (user ID or host).
* Newsfile
* Remove handling of multiple rows per ID
* Fix worker handling
* Comments from review
This should be safe to do on all workers/masters because it is guarded by
a config option which will ensure it is only actually done on the worker
assigned as a pusher.
It was originally implemented by pulling the full auth chain of all
state sets out of the database and doing set comparison. However, that
can take a lot work if the state and auth chains are large.
Instead, lets try and fetch the auth chains at the same time and
calculate the difference on the fly, allowing us to bail early if all
the auth chains converge. Assuming that the auth chains do converge more
often than not, this should improve performance. Hopefully.
Fixes#7065
This is basically the same as https://github.com/matrix-org/synapse/pull/6847 except it tries to populate events from `state_events` rather than `current_state_events`, since the latter might have been cleared from the state of some rooms too early, leaving them with a `NULL` room version.
This is a bit fiddly because it all has to be done on one fell swoop:
* Wherever we create a new event, pass in the room version (and check it matches the format version)
* When we prune an event, use the room version of the unpruned event to create the pruned version.
* When we pass an event over the replication protocol, pass the room version over alongside it, and use it when deserialising the event again.
This currently causes presence notify code to log exceptions when there
is no state changes to process. This doesn't actually cause any problems
as we'd simply do nothing anyway.
Support for getting TLS certificates through ACMEv1 ended on November 2019.
Signed-off-by: Uday Bansal <43824981+udaybansal19@users.noreply.github.com>
Instead lets just warn if the worker has a media listener configured but
has the media repository disabled.
Previously non media repository workers would just ignore the media
listener.
When we get an invite over federation, store the room version in the rooms table.
The general idea here is that, when we pull the invite out again, we'll want to know what room_version it belongs to (so that we can later redact it if need be). So we need to store it somewhere...
This is intended as a precursor to storing room versions when we receive an
invite over federation, but has the happy side-effect of fixing #3374 at last.
In short: change the store_room with try/except to a proper upsert which
updates the right columns.
* Give `notif_template_html`, `notif_template_text` default values (fixes#6960)
* Don't complain if `smtp_host` and `smtp_port` are unset, since they have sensible defaults (fixes#6961)
* Set the example for `enable_notifs` to `True`, for consistency and because it's more useful
* Raise errors as ConfigError rather than RuntimeError for nicer formatting
The state res v2 algorithm only cares about the difference between auth
chains, so we can pass in the known common state to the `get_auth_chain`
storage function so that it can ignore those events.
* Increase DB/CPU perf of `_is_server_still_joined` check.
For rooms with large amount of state a single user leaving could cause
us to go and load a lot of membership events and then pull out
membership state in a large number of batches.
* Newsfile
* Update synapse/storage/persist_events.py
Co-Authored-By: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Fix adding if too soon
* Update docstring
* Review comments
* Woops typo
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Reject device display names that are too long.
Too long is currently defined as 100 characters in length.
* Add a regression test for rejecting a too long device display name.
==============================
Features
--------
- Filter out m.room.aliases from the CS API to mitigate abuse while a better solution is specced. ([\#6878](https://github.com/matrix-org/synapse/issues/6878))
Internal Changes
----------------
- Fix continuous integration failures with old versions of `pip`, which were introduced by a release of the `zipp` library. ([\#6880](https://github.com/matrix-org/synapse/issues/6880))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAl5BLBwACgkQOSor00I9
eP/9Ogf9HZ+XD5tt1uYkGqDSvUBS4sHdNcvxpNf1UMo6VaY4K5b9kF28MjY07ur2
nGq/nnLyLZZzwVXtV3q8upIdIK1hcMp2HCU0qDhEljepOkGmyQTqZooxrdrLTjPS
232bbifB6VFdK8P4gPIGopCRQI9a+TII4jODBobiJR43e0gEPfSREJKAnJs7DYaD
Quf3Svzu+jB+X8ymWLVbCFXuk4A4UqPzrRPb8TQBDN3w35G4JBDAgIpdxhQdJpdR
RIS1HgSm95P03doS23RLUjXuIpBfYveyStuGfPx4P9Lf30M2o6bxDeTPo2+IGbST
yhl1jB0l8Ve5/6veuTieA6vuXWU55g==
=2rgX
-----END PGP SIGNATURE-----
Merge tag 'v1.10.0rc3' into develop
Synapse 1.10.0rc3 (2020-02-10)
==============================
Features
--------
- Filter out m.room.aliases from the CS API to mitigate abuse while a better solution is specced. ([\#6878](https://github.com/matrix-org/synapse/issues/6878))
Internal Changes
----------------
- Fix continuous integration failures with old versions of `pip`, which were introduced by a release of the `zipp` library. ([\#6880](https://github.com/matrix-org/synapse/issues/6880))
We're in the middle of properly mitigating spam caused by malicious aliases being added to a room. However, until this work fully lands, we temporarily filter out all m.room.aliases events from /sync and /messages on the CS API, to remove abusive aliases. This is considered acceptable as m.room.aliases events were never a reliable record of the given alias->id mapping and were purely informational, and in their current state do more harm than good.
A lot of the things we log at INFO are now a bit superfluous, so lets
make them DEBUG logs to reduce the amount we log by default.
Co-Authored-By: Brendan Abolivier <babolivier@matrix.org>
Co-authored-by: Brendan Abolivier <github@brendanabolivier.com>
We were looking at the wrong event type (`m.room.encryption` vs
`m.room.encrypted`).
Also fixup the duplicate `EvenTypes` entries.
Introduced in #6776.
I messed this up a bit in #6805, but fortunately we weren't actually doing
anything with the room_version so it didn't matter that it was a str not a RoomVersion.
When a server leaves a room it may stop sharing a room with remote
users, and thus not get any updates to their device lists. So we need to
check for this case and delete those device lists from the cache.
We don't need to do this if we stop sharing a room because the remote
user leaves the room, because we track that case via looking at
membership changes.
If we detect that the remote users' keys may have changed then we should
attempt to resync against the remote server rather than using the
(potentially) stale local cache.
We were sending device updates down both the federation stream and
device streams. This mean there was a race if the federation sender
worker processed the federation stream first, as when the sender checked
if there were new device updates the slaved ID generator hadn't been
updated with the new stream IDs and so returned nothing.
This situation is correctly handled by events/receipts/etc by not
sending updates down the federation stream and instead having the
federation sender worker listen on the other streams and poke the
transaction queues as appropriate.
Otherwise its just stale data, which may get deleted later anyway so
can't be relied on. It's also a bit of a shotgun if we're trying to get
the current state of a room we're not in.
These are easier to work with than the strings and we normally have one around.
This fixes `FederationHander._persist_auth_tree` which was passing a
RoomVersion object into event_auth.check instead of a string.
* Add note that user_dir requires disabling user dir
updates from the main synapse process.
* Add note that federation_reader should have
the federation listener resource.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
There are quite a few places that we assume that a redaction event has a
corresponding `redacts` key, which is not always the case. So lets
cheekily make it so that event.redacts just returns None instead.
The old statement returned `None` for such a `password_config` (like the one
created on first run), thus retrieval of the `pepper` key failed with
`AttributeError`.
Fixes#5315
Signed-off-by: Ivan Vilata i Balaguer <ivan@selidor.net>
* Raise an exception if there are pending background updates
So we return with a non-0 code
* Changelog
* Port synapse_port_db to async/await
* Port update_database to async/await
* Add version string to mocked homeservers
* Remove unused imports
* Convert overseen bits to async/await
* Fixup logging contexts
* Fix imports
* Add a way to print an error without raising an exception
* Incorporate review
Turns out that figuring out a remote user id for the SAML user isn't quite as obvious as it seems. Factor it out to the SamlMappingProvider so that it's easy to control.
Generally try to make this more comprehensible, and make it match the
conventions.
I've removed the documentation for all the settings which allow you to change
the names of the template files, because I can't really see why they are
useful.
* Port synapse.replication.tcp to async/await
* Newsfile
* Correctly document type of on_<FOO> functions as async
* Don't be overenthusiastic with the asyncing....
Currently we rely on `current_state_events` to figure out what rooms a
user was in and their last membership event in there. However, if the
server leaves the room then the table may be cleaned up and that
information is lost. So lets add a table that separately holds that
information.
AdditionalResource really doesn't add any value, and it gets in the way for
resources which want to support child resources or the like. So, if the
resource object already implements the IResource interface, don't bother
wrapping it.
This was ill-advised. We can't modify verify_keys here, because the response
object has already been signed by the requested key.
Furthermore, it's somewhat unnecessary because existing versions of Synapse
(which get upset that the notary key isn't present in verify_keys) will fall
back to a direct fetch via `/key/v2/server`.
Also: more tests for fetching keys via perspectives: it would be nice if we actually tested when our fetcher can't talk to our notary impl.
The mount in the form of ./matrix-config:/etc overwrites the contents of the container /etc folder. Since all valid ca certificates are stored in /etc, the synapse.push.httppusher, for example, cannot validate the certificate from matrix.org.
* Kill off redundant SynapseRequestFactory
We already get the Site via the Channel, so there's no need for a dedicated
RequestFactory: we can just use the right constructor.
* Workaround for error when fetching notary's own key
As a notary server, when we return our own keys, include all of our signing
keys in verify_keys.
This is a workaround for #6596.
If acme was enabled, the sdnotify startup hook would never be run because we
would try to add it to a hook which had already fired.
There's no need to delay it: we can sdnotify as soon as we've started the
listeners.
* Remove redundant python2 support code
`str.decode()` doesn't exist on python3, so presumably this code was doing
nothing
* Filter out pushers with corrupt data
When we get a row with unparsable json, drop the row, rather than returning a
row with null `data`, which will then cause an explosion later on.
* Improve logging when we can't start a pusher
Log the ID to help us understand the problem
* Make email pusher setup more robust
We know we'll have a `data` member, since that comes from the database. What we
*don't* know is if that is a dict, and if that has a `brand` member, and if
that member is a string.
Previously we tried to be clever and filter out some unnecessary event
IDs to keep the auth chain small, but that had some annoying
interactions with state res v2 so we stop doing that for now.
Previously we tried to be clever and filter out some unnecessary event
IDs to keep the auth chain small, but that had some annoying
interactions with state res v2 so we stop doing that for now.
