Keeping track of a lower bound of stream ID where we've deleted everything below makes the queries much faster. Otherwise, every time we scan for rows to delete we'd re-scan across all the rows that have previously deleted (until the next table VACUUM).
This is mostly useful for federated rooms where some users
would get stuck in the invite or knock state when the room
was purged from their homeserver.
This adds a module API which allows a module to update a user's
presence state/status message. This is useful for controlling presence
from an external system.
To fully control presence from the module the presence.enabled config
parameter gains a new state of "untracked" which disables internal tracking
of presence changes via user actions, etc. Only updates from the module will
be persisted and sent down sync properly).
This splits thinsg into two queries, but most of the time we won't have
new event backwards extremities so this shouldn't actually add an extra
RTT for the majority of cases.
Note this removes the check for events with no prev events, but that was
part of MSC2716 work that has since been removed.
Synapse was incorrectly implemented with a knock_state_events
property on some APIs (instead of knock_room_state). This was
correct in Synapse 1.70.0, but *both* fields were sent to also be
compatible with Synapse versions expecting the wrong field.
Enough time has passed that only the correct field needs to be
included/handled.
Co-authored-by: David Robertson <davidr@element.io>
Co-authored-by: Patrick Cloke <patrickc@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
Assert that the return type of callables wrapped in @cached
and @cachedList are cachable (aka immutable).
Also add restore of purge/shutdown rooms after a synapse restart.
Co-authored-by: Eric Eastwood <erice@matrix.org>
Co-authored-by: Erik Johnston <erikj@matrix.org>
Refresh tokens were not correctly moved to the rehydrated
device (similar to how the access token is currently handled).
This resulted in invalid refresh tokens after rehydration.
Adds both the List-Unsubscribe (RFC2369) and List-Unsubscribe-Post (RFC8058)
headers to push notification emails, which together should:
* Show an "Unsubscribe" link in the MUA UI when viewing Synapse notification emails.
* Enable "one-click" unsubscribe (the user never leaves their MUA, which automatically
makes a POST request to the specified endpoint).
* Allow user_id to be optional for room deletion
* Add module API method to delete a room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Don't worry about the case block=True && requester_user_id is None
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Add a (long) timeout to when a "busy" device is considered not online.
This does *not* match MSC3026, but is a reasonable thing for an
implementation to do.
Expands tests for the (unstable) busy presence with multiple devices.
Tracks presence on an individual per-device basis and combine
the per-device state into a per-user state. This should help in
situations where a user has multiple devices with conflicting status
(e.g. one is syncing with unavailable and one is syncing with online).
The tie-breaking is done by priority:
BUSY > ONLINE > UNAVAILABLE > OFFLINE
Refactoring to use both the user ID & the device ID when tracking
the currently syncing users in the presence handler.
This is done both locally and over replication. Note that the device
ID is discarded but will be used in a future change.
Refactoring to pass the device ID (in addition to the user ID) through
the presence handler (specifically the `user_syncing`, `set_state`,
and `bump_presence_active_time` methods and their replication
versions).
Simplify some of the presence code by reducing duplicated code between
worker & non-worker modes.
The main change is to push some of the logic from `user_syncing` into
`set_state`. This is done by passing whether the user is setting the presence
via a `/sync` with a new `is_sync` flag to `set_state`. If this is `true` some
additional logic is performed:
* Don't override `busy` presence.
* Update the `last_user_sync_ts`.
* Never update the status message.
Misc. clean-ups to:
* Use keyword arguments.
* Return early (reducing indentation) of some functions.
* Removing duplicated / unused code.
* Use wrap_as_background_process.
For now this maintains compatible with old Synapses by falling back
to using transaction semantics on a per-access token. A future version
of Synapse will drop support for this.
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <89468146+nico-famedly@users.noreply.github.com>
Co-authored-by: Hubert Chathi <hubert@uhoreg.ca>
And fix a bug in the implementation of the updated redaction
format (MSC2174) where the top-level redacts field was not
properly added for backwards-compatibility.
**Before:**
```
Error retrieving alias
```
**After:**
```
Error retrieving alias #foo:bar -> 401 Unauthorized
```
*Spawning from creating the [manual testing strategy for the outbound federation proxy](https://github.com/matrix-org/synapse/pull/15773).*
We now only block the client to backfill when we see a large gap in the events (more than 2 events missing in a row according to `depth`), more than 3 single-event holes, or not enough messages to fill the response. Otherwise, we return the messages directly to the client and backfill in the background for eventual consistency sake.
Fix https://github.com/matrix-org/synapse/issues/15696
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
This moves the deactivated user check to the method which
all login types call.
Additionally updates the application service tests to be more
realistic by removing invalid tests and fixing server names.
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
m.push_rules, like m.fully_read, is a special account data type that cannot
be set using the normal /account_data endpoint. Return an error instead
of allowing data that will not be used to be stored.
MSC3984 proxies /keys/query requests to appservices, but servers will
can also requests devices / keys from the /user/devices endpoint.
The formats are close enough that we can "proxy" that /user/devices to
appservices (by calling /keys/query) and then change the format of the
returned data before returning it over federation.
Behind a configuration flag this adds + to the list of allowed
characters in Matrix IDs. The main feature this enables is
using full E.164 phone numbers as Matrix IDs.
Add an `is_mine_server_name` method, similar to `is_mine_id`.
Ideally we would use this consistently, instead of sometimes comparing
against `hs.hostname` and other times reaching into
`hs.config.server.server_name`.
Also fix a bug in the tests where `hs.hostname` would sometimes differ
from `hs.config.server.server_name`.
Signed-off-by: Sean Quah <seanq@matrix.org>
A dont_notify action is a no-op (and coalesce is undefined). These are
both considered no-ops by the spec, per MSC3987 and the predefined
push rules were updated to remove dont_notify from the list of actions.
Adds an optional keyword argument to the /relations API which
will recurse a limited number of event relationships.
This will cause the API to return not just the events related to the
parent event, but also events related to those related to the parent
event, etc.
This is disabled by default behind an experimental configuration
flag and is currently implemented using prefixed parameters.
MSC3983 provides a way to request multiple OTKs at once from appservices,
this extends this concept to the Client-Server API.
Note that this will likely be spit out into a separate MSC, but is currently part of
MSC3983.
It can be useful to always return the fallback key when attempting to
claim keys. This adds an unstable endpoint for `/keys/claim` which
always returns fallback keys in addition to one-time-keys.
The fallback key(s) are not marked as "used" unless there are no
corresponding OTKs.
This is currently defined in MSC3983 (although likely to be split out
to a separate MSC). The endpoint shape may change or be requested
differently (i.e. a keyword parameter on the current endpoint), but the
core logic should be reasonable.
This change fixes a rare bug where initial /syncs would fail with a
`KeyError` under the following circumstances:
1. A user fast joins a remote room.
2. The user is kicked from the room before the room's full state has
been synced.
3. A second local user fast joins the room.
4. Events are backfilled into the room with a higher topological
ordering than the original user's leave. They are assigned a
negative stream ordering. It's not clear how backfill happened here,
since it is expected to be equivalent to syncing the full state.
5. The second local user leaves the room before the room's full state
has been synced. The homeserver does not complete the sync.
6. The original user performs an initial /sync with lazy_load_members
enabled.
* Because they were kicked from the room, the room is included in
the /sync response even though the include_leave option is not
specified.
* To populate the room's timeline, `_load_filtered_recents` /
`get_recent_events_for_room` fetches events with a lower stream
ordering than the leave event and picks the ones with the highest
topological orderings (which are most recent). This captures the
backfilled events after the leave, since they have a negative
stream ordering. These events are filtered out of the timeline,
since the user was not in the room at the time and cannot view
them. The sync code ends up with an empty timeline for the room
that notably does not include the user's leave event.
This seems buggy, but at least we don't disclose events the user
isn't allowed to see.
* Normally, `compute_state_delta` would fetch the state at the
start and end of the room's timeline to generate the sync
response. Since the timeline is empty, it fetches the state at
`min(now, last event in the room)`, which corresponds with the
second user's leave. The state during the entirety of the second
user's membership does not include the membership for the first
user because of partial state.
This part is also questionable, since we are fetching state from
outside the bounds of the user's membership.
* `compute_state_delta` then tries and fails to find the user's
membership in the auth events of timeline events. Because there
is no timeline event whose auth events are expected to contain
the user's membership, a `KeyError` is raised.
Also contains a drive-by fix for a separate unlikely race condition.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Revert "Fix registering a device on an account with lots of devices (#15348)"
This reverts commit f0d8f66eaa.
* Revert "Delete stale non-e2e devices for users, take 3 (#15183)"
This reverts commit 78cdb72cd6.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for devices in addition
to any information stored in the Synapse database.
Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
* Fix joining rooms you have been unbanned from
Since forever synapse did not allow you to join a room after you have
been unbanned from it over federation. This was not actually because of
the unban event not federating. Synapse simply used outdated state to
validate the join transition. This skips the validation if we are not in
the room and for that reason won't have the current room state.
Fixes#1563
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Update changelog.d/15323.bugfix
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Experimental support for MSC3983 is behind a configuration flag.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for one-time keys *if*
there are none uploaded to Synapse.
This makes it so that we rely on the `device_id` to delete pushers on logout,
instead of relying on the `access_token_id`. This ensures we're not removing
pushers on token refresh, and prepares for a world without access token IDs
(also known as the OIDC).
This actually runs the `set_device_id_for_pushers` background update, which
was forgotten in #13831.
Note that for backwards compatibility it still deletes pushers based on the
`access_token` until the background update finishes.
When a room is deleted in Synapse we remove the event forward
extremities in the room, so if (say a bot) tries to send a message into
the room we error out due to not being able to calculate prev events for
the new event *before* we check if the sender is in the room.
Fixes#8094
* Scaffolding for background process to refresh profiles
* Add scaffolding for background process to refresh profiles for a given server
* Implement the code to select servers to refresh from
* Ensure we don't build up multiple looping calls
* Make `get_profile` able to respect backoffs
* Add logic for refreshing users
* When backing off, schedule a refresh when the backoff is over
* Wake up the background processes when we receive an interesting state event
* Add tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comment about 1<<62
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Remove special-case method for new memberships only, use more generic method
* Only collect profiles from state events in public rooms
* Add a table to track stale remote user profiles
* Add store methods to set and delete rows in this new table
* Mark remote profiles as stale when a member state event comes in to a private room
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Simplify by removing Optionality of `event_id`
* Replace names and avatars with None if they're set to dodgy things
I think this makes more sense anyway.
* Move schema delta to 74 (I missed the boat?)
* Turns out these can be None after all
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
It is not necessary to reach out to the database to check some
parameters if the auto-join rooms are not configured, or (in some cases)
if auto-create rooms is not configured.
* Tweak docstring and type hint
* Flip logic and provide better name
* Separate decision from action
* Track a set of strings, not EventBases
* Require explicit boolean options from callers
* Add explicit option for partial state rooms
* Changelog
* Rename param
When pushing events in partial state rooms down incremental /sync, we
try to find the `m.room.member` state event for their senders by digging
through their auth events, so that we can present the membership to the
client. Events usually have a membership event in their auth events,
with the exception of the `m.room.create` event and a user's first join
into the room.
When implementing #13477, we took the case of a user's first join into
account, but forgot to handle the `m.room.create` case. This change
fixes that.
Signed-off-by: Sean Quah <seanq@matrix.org>
It turns out that no clients rely on server-side aggregation of `m.annotation`
relationships: it's just not very useful as currently implemented.
It's also non-trivial to calculate.
I want to remove it from MSC2677, so to keep the implementation in line, let's
remove it here.
* Change `create_room` return type
* Don't return room alias from /createRoom
* Update other callsites
* Fix up mypy complaints
It looks like new_room_user_id is None iff new_room_id is None. It's a
shame we haven't expressed this in a way that mypy can understand.
* Changelog
Previously, when creating a join event in /make_join, we would decide
whether to include additional fields to satisfy restricted room checks
based on the current state of the room. Then, when building the event,
we would capture the forward extremities of the room to use as prev
events.
This is subject to race conditions. For example, when leaving and
rejoining a room, the following sequence of events leads to a misleading
403 response:
1. /make_join reads the current state of the room and sees that the user
is still in the room. It decides to omit the field required for
restricted room joins.
2. The leave event is persisted and the room's forward extremities are
updated.
3. /make_join builds the event, using the post-leave forward extremities.
The event then fails the restricted room checks.
To mitigate the race, we move the read of the forward extremities closer
to the read of the current state. Ideally, we would compute the state
based off the chosen prev events, but that can involve state resolution,
which is expensive.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Update mypy and mypy-zope
* Remove unused ignores
These used to suppress
```
synapse/storage/engines/__init__.py:28: error: "__new__" must return a
class instance (got "NoReturn") [misc]
```
and
```
synapse/http/matrixfederationclient.py:1270: error: "BaseException" has no attribute "reasons" [attr-defined]
```
(note that we check `hasattr(e, "reasons")` above)
* Avoid empty body warnings, sometimes by marking methods as abstract
E.g.
```
tests/handlers/test_register.py:58: error: Missing return statement [empty-body]
tests/handlers/test_register.py:108: error: Missing return statement [empty-body]
```
* Suppress false positive about `JaegerConfig`
Complaint was
```
synapse/logging/opentracing.py:450: error: Function "Type[Config]" could always be true in boolean context [truthy-function]
```
* Fix not calling `is_state()`
Oops!
```
tests/rest/client/test_third_party_rules.py:428: error: Function "Callable[[], bool]" could always be true in boolean context [truthy-function]
```
* Suppress false positives from ParamSpecs
````
synapse/logging/opentracing.py:971: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
synapse/logging/opentracing.py:1017: error: Argument 2 to "_custom_sync_async_decorator" has incompatible type "Callable[[Arg(Callable[P, R], 'func'), **P], _GeneratorContextManager[None]]"; expected "Callable[[Callable[P, R], **P], _GeneratorContextManager[None]]" [arg-type]
````
* Drive-by improvement to `wrapping_logic` annotation
* Workaround false "unreachable" positives
See https://github.com/Shoobx/mypy-zope/issues/91
```
tests/http/test_proxyagent.py:626: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:762: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:826: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:838: error: Statement is unreachable [unreachable]
tests/http/test_proxyagent.py:845: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:151: error: Statement is unreachable [unreachable]
tests/http/federation/test_matrix_federation_agent.py:452: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:60: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:93: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:127: error: Statement is unreachable [unreachable]
tests/logging/test_remote_handler.py:152: error: Statement is unreachable [unreachable]
```
* Changelog
* Tweak DBAPI2 Protocol to be accepted by mypy 1.0
Some extra context in:
- https://github.com/matrix-org/python-canonicaljson/pull/57
- https://github.com/python/mypy/issues/6002
- https://mypy.readthedocs.io/en/latest/common_issues.html#covariant-subtyping-of-mutable-protocol-members-is-rejected
* Pull in updated canonicaljson lib
so the protocol check just works
* Improve comments in opentracing
I tried to workaround the ignores but found it too much trouble.
I think the corresponding issue is
https://github.com/python/mypy/issues/12909. The mypy repo has a PR
claiming to fix this (https://github.com/python/mypy/pull/14677) which
might mean this gets resolved soon?
* Better annotation for INTERACTIVE_AUTH_CHECKERS
* Drive-by AUTH_TYPE annotation, to remove an ignore
* Fix order of partial state tables when purging
`partial_state_rooms` has an FK on `events` pointing to the join event we
get from `/send_join`, so we must delete from that table before deleting
from `events`.
**NB:** It would be nice to cancel any resync processes for the room
being purged. We do not do this at present. To do so reliably we'd need
an internal HTTP "replication" endpoint, because the worker doing the
resync process may be different to that handling the purge request.
The first time the resync process tries to write data after the deletion
it will fail because we have deleted necessary data e.g. auth
events. AFAICS it will not retry the resync, so the only downside to
not cancelling the resync is a scary-looking traceback.
(This is presumably extremely race-sensitive.)
* Changelog
* admist(?) -> between
* Warn about a race
* Fix typo, thanks Sean
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
---------
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
...when lazy loading of members is not enabled. It's weird to notify
a client that another user's device list has changed when the client
doesn't think that they share a room.
Note that when a room is un-partial stated, device list updates are
emitted for every member in that room over /sync.
Signed-off-by: Sean Quah <seanq@matrix.org>
Fixes#12801.
Complement tests are at
https://github.com/matrix-org/complement/pull/567.
Avoid blocking on full state when handling a subsequent join into a
partial state room.
Also always perform a remote join into partial state rooms, since we do
not know whether the joining user has been banned and want to avoid
leaking history to banned users.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
It's important that collections returned from `@cached` methods are not
modified, otherwise future retrievals from the cache will return the
modified collection.
This applies to the return values from `@cached` methods and the values
inside the dictionaries returned by `@cachedList` methods. It's not
necessary for the dictionaries returned by `@cachedList` methods
themselves to be read-only.
Signed-off-by: Sean Quah <seanq@matrix.org>
Co-authored-by: David Robertson <davidr@element.io>
The per-room account data is no longer unconditionally
fetched, even if all rooms will be filtered out.
Global account data will not be fetched if it will all be
filtered out.
The previous version of the code could mutate a cached value,
but only if the input requested all devices of a user *and* a specific
device.
To avoid this nonsensical situation we no longer fetch a specific
device ID if all of a user's devices are returned.
Ensure that the list of servers in a partial state room always contains
the server we joined off.
Also refactor `get_partial_state_servers_at_join` to return `None` when
the given room is no longer partial stated, to explicitly indicate when
the room has partial state. Otherwise it's not clear whether an empty
list means that the room has full state, or the room is partial stated,
but the server we joined off told us that there are no servers in the
room.
Signed-off-by: Sean Quah <seanq@matrix.org>
If a sync request does not need to calculate per-room entries &
is not generating presence & is not generating device list data
(e.g. during initial sync) avoid the expensive calculation of room
specific data.
This is a micro-optimisation for clients syncing simply to receive
to-device information.
This expands the previous optimisation from being only for initial
sync to being for all sync requests.
It also inverts some of the logic to be inclusive instead of exclusive.
The `parse_enum` helper pulls an enum value from the query string
(by delegating down to the parse_string helper with values generated
from the enum).
This is used to pull out "f" and "b" in most places and then we thread
the resulting Direction enum throughout more code.
`run_in_background` calls re-use the current logging context. When they
are not awaited, they can complete after the current logging context has
been marked as finished, which leads to log spam. Use
`run_as_background_process` instead.
Fixes one of the instances of #13090.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Perfer `type(x) is int` to `isinstance(x, int)`
This covered all additional instances I could see where `x` was
user-controlled.
The remaining cases are
```
$ rg -s 'isinstance.*[^_]int'
tests/replication/_base.py
576: if isinstance(obj, int):
synapse/util/caches/stream_change_cache.py
136: assert isinstance(stream_pos, int)
214: assert isinstance(stream_pos, int)
246: assert isinstance(stream_pos, int)
267: assert isinstance(stream_pos, int)
synapse/replication/tcp/external_cache.py
133: if isinstance(result, int):
synapse/metrics/__init__.py
100: if isinstance(calls, (int, float)):
synapse/handlers/appservice.py
262: assert isinstance(new_token, int)
synapse/config/_util.py
62: if isinstance(p, int):
```
which cover metrics, logic related to `jsonschema`, and replication and
data streams. AFAICS these are all internal to Synapse
* Changelog
* Batch look-ups to see if rooms are partial stated.
* Fix issues found in linting.
* Fix typo.
* Apply suggestions from code review
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Clarify comments.
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Also improve the cache size while we're at it
* is_partial_state_rooms -> is_partial_state_room_batched
* Run `black`
* Improve annotation for `simple_select_many_batch`
* Fix is_partial_state_room_batched impl
* Okay, _actually_ fix impl
* Update description.
* Update synapse/storage/databases/main/room.py
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Run black.
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: David Robertson <davidr@element.io>
Destination was being used incorrectly (a single destination instead
of a list of destinations was being passed).
This also updates some of the types in the area to not use Collection[str],
which is a footgun.
* Allow `AbstractSet` in `StrCollection`
Or else frozensets are excluded. This will be useful in an upcoming
commit where I plan to change a function that accepts `List[str]` to
accept `StrCollection` instead.
* `rooms_to_exclude` -> `rooms_to_exclude_globally`
I am about to make use of this exclusion mechanism to exclude rooms for
a specific user and a specific sync. This rename helps to clarify the
distinction between the global config and the rooms to exclude for a
specific sync.
* Better function names for internal sync methods
* Track a list of excluded rooms on SyncResultBuilder
I plan to feed a list of partially stated rooms for this sync to ignore
* Exclude partial state rooms during eager sync
using the mechanism established in the previous commit
* Track un-partial-state stream in sync tokens
So that we can work out which rooms have become fully-stated during a
given sync period.
* Fix mutation of `@cached` return value
This was fouling up a complement test added alongside this PR.
Excluding a room would mean the set of forgotten rooms in the cache
would be extended. This means that room could be erroneously considered
forgotten in the future.
Introduced in #12310, Synapse 1.57.0. I don't think this had any
user-visible side effects (until now).
* SyncResultBuilder: track rooms to force as newly joined
Similar plan as before. We've omitted rooms from certain sync responses;
now we establish the mechanism to reintroduce them into future syncs.
* Read new field, to present rooms as newly joined
* Force un-partial-stated rooms to be newly-joined
for eager incremental syncs only, provided they're still fully stated
* Notify user stream listeners to wake up long polling syncs
* Changelog
* Typo fix
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Unnecessary list cast
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Rephrase comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Another comment
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Fixup merge(?)
* Poke notifier when receiving un-partial-stated msg over replication
* Fixup merge whoops
Thanks MV :)
Co-authored-by: Mathieu Velen <mathieuv@matrix.org>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
* Faster joins: Update room stats and user directory on workers when done
When finishing a partial state join to a room, we update the current
state of the room without persisting additional events. Workers receive
notice of the current state update over replication, but neglect to wake
the room stats and user directory updaters, which then get incidentally
triggered the next time an event is persisted or an unrelated event
persister sends out a stream position update.
We wake the room stats and user directory updaters at the appropriate
time in this commit.
Part of #12814 and #12815.
Signed-off-by: Sean Quah <seanq@matrix.org>
* fixup comment
Signed-off-by: Sean Quah <seanq@matrix.org>
* Enable Complement tests for Faster Remote Room Joins on worker-mode
* (dangerous) Add an override to allow Complement to use FRRJ under workers
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Fix race where we didn't send out replication notification
* MORE HACKS
* Fix get_un_partial_stated_rooms_token to take instance_name
* Fix bad merge
* Remove warning
* Correctly advance un_partial_stated_room_stream
* Fix merge
* Add another notify_replication
* Fixups
* Create a separate ReplicationNotifier
* Fix test
* Fix portdb
* Create a separate ReplicationNotifier
* Fix test
* Fix portdb
* Fix presence test
* Newsfile
* Apply suggestions from code review
* Update changelog.d/14752.misc
Co-authored-by: Erik Johnston <erik@matrix.org>
* lint
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Avoid clearing out forward extremities when doing a second remote join
When joining a restricted room where the local homeserver does not have
a user able to issue invites, we perform a second remote join. We want
to avoid clearing out forward extremities in this case because the
forward extremities we have are up to date and clearing out forward
extremities creates a window in which the room can get bricked if
Synapse crashes.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Do a full join when doing a second remote join into a full state room
We cannot persist a partial state join event into a joined full state
room, so we perform a full state join for such rooms instead. As a
future optimization, we could always perform a partial state join and
compute or retrieve the full state ourselves if necessary.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Add lock around partial state flag for rooms
Signed-off-by: Sean Quah <seanq@matrix.org>
* Preserve partial state info when doing a second partial state join
Signed-off-by: Sean Quah <seanq@matrix.org>
* Add newsfile
* Add a TODO(faster_joins) marker
Signed-off-by: Sean Quah <seanq@matrix.org>
Currently, we will try to start a new partial state sync every time we
perform a remote join, which is undesirable if there is already one
running for a given room.
We intend to perform remote joins whenever additional local users wish
to join a partial state room, so let's ensure that we do not start more
than one concurrent partial state sync for any given room.
------------------------------------------------------------------------
There is a race condition where the homeserver leaves a room and later
rejoins while the partial state sync from the previous membership is
still running. There is no guarantee that the previous partial state
sync will process the latest join, so we restart it if needed.
Signed-off-by: Sean Quah <seanq@matrix.org>
