Also add restore of purge/shutdown rooms after a synapse restart.
Co-authored-by: Eric Eastwood <erice@matrix.org>
Co-authored-by: Erik Johnston <erikj@matrix.org>
Refresh tokens were not correctly moved to the rehydrated
device (similar to how the access token is currently handled).
This resulted in invalid refresh tokens after rehydration.
Adds both the List-Unsubscribe (RFC2369) and List-Unsubscribe-Post (RFC8058)
headers to push notification emails, which together should:
* Show an "Unsubscribe" link in the MUA UI when viewing Synapse notification emails.
* Enable "one-click" unsubscribe (the user never leaves their MUA, which automatically
makes a POST request to the specified endpoint).
Add a (long) timeout to when a "busy" device is considered not online.
This does *not* match MSC3026, but is a reasonable thing for an
implementation to do.
Expands tests for the (unstable) busy presence with multiple devices.
Tracks presence on an individual per-device basis and combine
the per-device state into a per-user state. This should help in
situations where a user has multiple devices with conflicting status
(e.g. one is syncing with unavailable and one is syncing with online).
The tie-breaking is done by priority:
BUSY > ONLINE > UNAVAILABLE > OFFLINE
* Fix rare bug that broke looping calls
We can't interact with the reactor from the main thread via looping
call.
Introduced in v1.90.0 / #15791.
* Newsfile
Refactoring to pass the device ID (in addition to the user ID) through
the presence handler (specifically the `user_syncing`, `set_state`,
and `bump_presence_active_time` methods and their replication
versions).
Simplify some of the presence code by reducing duplicated code between
worker & non-worker modes.
The main change is to push some of the logic from `user_syncing` into
`set_state`. This is done by passing whether the user is setting the presence
via a `/sync` with a new `is_sync` flag to `set_state`. If this is `true` some
additional logic is performed:
* Don't override `busy` presence.
* Update the `last_user_sync_ts`.
* Never update the status message.
* Properly update retry_last_ts when hitting the maximum retry interval
This was broken in 1.87 when the maximum retry interval got changed from
almost infinite to a week (and made configurable).
fixes#16101
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
* Change fix + add test
* Add comment
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Co-authored-by: Mathieu Velten <mathieuv@matrix.org>
This should only be called on HomeServer objects which are configured
to run background tasks, which is automatically (and properly) done via
the call to setup().
If we don't have all the auth events in a room then not all state events will have a chain cover index. Even so, we can still use the chain cover index on the events that do have it, rather than bailing and using the slower functions.
This situation should not arise for newly persisted rooms, as we check we have the full auth chain for each event, but can happen for existing rooms.
c.f. #15245
We were seeing serialization errors when taking out multiple read locks.
The transactions were retried, so isn't causing any failures.
Introduced in #15782.
Adds three new configuration variables:
* destination_min_retry_interval is identical to before (10mn).
* destination_retry_multiplier is now 2 instead of 5, the maximum value will
be reached slower.
* destination_max_retry_interval is one day instead of (essentially) infinity.
Capping this will cause destinations to continue to be retried sometimes instead
of being lost forever. The previous value was 2 ^ 62 milliseconds.
The location of the redacts field changes in room version 11. Ensure
it is copied to the *new* location for *old* room versions for
forwards-compatibility with clients.
Note that copying it to the *old* location for the *new* room version
was previously handled.
* Updates the rule ID.
* Use `event_property_is` instead of `event_match`.
This updates the implementation of MSC3958 to match the latest
text from the MSC.
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <n.werner@famedly.com>
Co-authored-by: Nicolas Werner <89468146+nico-famedly@users.noreply.github.com>
Co-authored-by: Hubert Chathi <hubert@uhoreg.ca>
And fix a bug in the implementation of the updated redaction
format (MSC2174) where the top-level redacts field was not
properly added for backwards-compatibility.
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
Unix socket support for `federation` and `client` Listeners has existed now for a little while(since [1.81.0](https://github.com/matrix-org/synapse/pull/15353)), but there was one last hold out before it could be complete: HTTP Replication communication. This should finish it up. The Listeners would have always worked, but would have had no way to be talked to/at.
---------
Co-authored-by: Eric Eastwood <madlittlemods@gmail.com>
Co-authored-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Co-authored-by: Eric Eastwood <erice@element.io>
Allow configuring the set of workers to proxy outbound federation traffic through (`outbound_federation_restricted_to`).
This is useful when you have a worker setup with `federation_sender` instances responsible for sending outbound federation requests and want to make sure *all* outbound federation traffic goes through those instances. Before this change, the generic workers would still contact federation themselves for things like profile lookups, backfill, etc. This PR allows you to set more strict access controls/firewall for all workers and only allow the `federation_sender`'s to contact the outside world.
The original code is from @erikjohnston's branches which I've gotten in-shape to merge.
If you leave a room and forget it, then rejoin it, the room would be
missing from the next initial sync.
fixes#13262
Signed-off-by: Nicolas Werner <n.werner@famedly.com>
* Check required power levels earlier in createRoom handler.
- If a server was configured to reject the creation of rooms with E2EE
enabled (by specifying an unattainably high power level for
"m.room.encryption" in default_power_level_content_override), the 403
error was not being triggered until after the room was created and
before the "m.room.power_levels" was sent. This allowed a user to
access the partially-configured room and complete the setup of E2EE
and power levels manually.
- This change causes the power level overrides to be checked earlier and
the request to be rejected before the user gains access to the room.
- A new `_validate_room_config` method is added to contain checks that
should be run before a room is created.
- The new test case confirms that a user request is rejected by the new
validation method.
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
* Add a changelog file.
* Formatting fix for black.
* Remove unneeded line from test.
---------
Signed-off-by: Grant McLean <grant@catalyst.net.nz>
See https://github.com/matrix-org/synapse/pull/14095#discussion_r990335492
This is useful because when see that a relevant event is an `outlier` or `soft-failed`, then that's a good unexpected indicator explaining why it's not showing up. `filter_events_for_client` is used in `/sync`, `/messages`, `/context` which are all common end-to-end assertion touch points (also notifications, relations).
Implements stable support for MSC3882; this involves updating Synapse's support to
match the MSC / the spec says.
Continue to support the unstable version to allow clients to transition.
The stubs have some issues so this has some generous cast
and ignores in it, but it is better than not having stubs.
Note that confusing that Element is a function which creates
_Element instances (and similarly for Comment).
* Fix#15669: always populate instance map even if it was empty
* Fix some tests
* Fix more tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* CI fix: don't forget to update apt repository sources before installing olddeps deps
* Add test testing the backwards compatibility
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
The cached decorators always return a Deferred, which was not
properly propagated. It was close enough when wrapping coroutines,
but failed if a bare function was wrapped.
This moves the deactivated user check to the method which
all login types call.
Additionally updates the application service tests to be more
realistic by removing invalid tests and fixing server names.
Fix https://github.com/matrix-org/synapse/issues/15618
### Before
```
2023-05-17 22:51:36-0500 [-] 2023-05-17 22:51:36,889 - synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### After
```
2023-05-19 18:16:20-0500 [-] synapse.server - 338 - INFO - sentinel - Finished setting up.
```
### Dev notes
The `Twisted.Logger` controls the `2023-05-19 18:16:20-0500 [-]` prefix, see : [`twisted/twisted` -> `src/twisted/logger/_format.py#L362-L374`](34b161e66b/src/twisted/logger/_format.py (L362-L374))
And we delegate our logs to the Twisted Logger for the tests which puts it in `_trial_temp/test.log`
The event_fields property in filters should use the proper
escape rules, namely backslashes can be escaped with
an additional backslash.
This adds tests (adapted from matrix-js-sdk) and implements
the logic to properly split the event_fields strings.
...to try to control memory usage. `HomeServerConfig`s hold on to
many Jinja2 objects, which come out to over 0.5 MiB per config.
Over the course of a full test run, the cache grows to ~360 entries.
Limit it to 8 entries.
Part of #15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
R30v2 has been out since 2021-07-19 (https://github.com/matrix-org/synapse/pull/10332)
and we started collecting stats on 2021-08-16. Since it's been over a year now
(almost 2 years), this is enough grace period for us to now rip it out.
Synapse will no longer send (or respond to) the unstable flags
for faster joins. These were only available behind a configuration
flag and handled in parallel with the stable flags.
This change fixes two memory leaks during `trial` test runs.
Garbage collection is disabled during each test case and a gen-0 GC is
run at the end of each test. However, when the gen-0 GC is run, the
`TestCase` object usually still holds references to the `HomeServer`
used during the test. As a result, the `HomeServer` gets promoted to
gen-1 and then never garbage collected.
Fix this by periodically running full GCs.
Additionally, fix `HomeServer`s leaking after tests that touch inbound
federation due to `FederationRateLimiter`s adding themselves to a global
set, by turning the set into a `WeakSet`.
Resolves#15622.
Signed-off-by: Sean Quah <seanq@matrix.org>
If the previous read marker is pointing to an event that no longer exists
(e.g. due to retention) then assume that the newly given read marker
is newer.
To track changes in MSC2666:
- The change from `/mutual_rooms/{user_id}` to `/mutual_rooms?user_id={user_id}`.
- The addition of `next_batch_token` (and logic).
- Unstable flag now being `uk.half-shot.msc2666.query_mutual_rooms`.
- The error code when your own user is requested.
There are two situations which were previously not properly checked:
1. If the requested URL was replaced with an oEmbed URL, then the
oEmbed URL was not checked against url_preview_url_blacklist.
2. Follow-up URLs (either via autodiscovery of oEmbed or to pre-cache
images) were not checked against url_preview_url_blacklist.
Fix the following `mypy` errors when running `mypy` with Python 3.7:
```
synapse/storage/controllers/stats.py:58: error: "Counter" is not subscriptable, use "typing.Counter" instead [misc]
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
Part of https://github.com/matrix-org/synapse/issues/15603
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default, https://peps.python.org/pep-0585/#implementation
Fix:
```
tests/test_state.py:267: error: "dict" is not subscriptable, use "typing.Dict" instead [misc]
```
In Python 3.9, `typing` is deprecated and the types are subscriptable (generics) by default,
https://peps.python.org/pep-0585/#implementation
