* Make lock better handle process being killed
If the process gets killed and restarted (so that it didn't have a
chance to drop its locks gracefully) then there may still be locks in
the DB that are for the same instance that haven't yet timed out but are
safe to delete.
We handle this case by a) checking if the current instance already has
taken out the lock, and b) if not then ignoring locks that are for the
same instance.
* Periodically check for old staged events
This is to protect against other instances dying and their locks timing
out.
When an event fetcher aborts due to an exception, `_event_fetch_ongoing`
must be decremented, otherwise the event fetcher would never be
replaced. If enough event fetchers were to fail, no more events would be
fetched and requests would get stuck waiting for events.
Users admin API can now also modify user
type in addition to allowing it to be
set on user creation.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
Resolve and share `state_groups` for all historical events in batch. This also helps for showing the appropriate avatar/displayname in Element and will work whenever `/messages` has one of the historical messages as the first message in the batch.
This does have the flaw where if you just insert a single historical event somewhere, it probably won't resolve the state correctly from `/messages` or `/context` since it will grab a non historical event above or below with resolved state which never included the historical state back then. For the same reasions, this also does not work in Element between the transition from actual messages to historical messages. In the Gitter case, this isn't really a problem since all of the historical messages are in one big lump at the beginning of the room.
For a future iteration, might be good to look at `/messages` and `/context` to additionally add the `state` for any historical messages in that batch.
---
How are the `state_groups` shared? To illustrate the `state_group` sharing, see this example:
**Before** (new `state_group` for every event 😬, very inefficient):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$_JXfwUDIWS6xKGG4SmZXjSFrizhARM7QblhATVWWUcA state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$1ZBfmBKEjg94d-vGYymKrVYeghwBOuGJ3wubU1-I9y0 state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$Mq2JvRetTyclPuozRI682SAjYp3GqRuPc8_cH5-ezPY state_group=10
create_new_client_event m.room.message event=$MfmY4rBQkxrIp8jVwVMTJ4PKnxSigpG9E2cn7S0AtTo state_group=11
create_new_client_event m.room.message event=$uYOv6V8wiF7xHwOMt-60d1AoOIbqLgrDLz6ZIQDdWUI state_group=12
create_new_client_event m.room.message event=$PAbkJRMxb0bX4A6av463faiAhxkE3FEObM1xB4D0UG4 state_group=13
create_new_client_event org.matrix.msc2716.batch event=$Oy_S7AWN7rJQe_MYwGPEy6RtbYklrI-tAhmfiLrCaKI state_group=14
```
**After** (all events in batch sharing `state_group=10`) (the base insertion event has `state_group=8` which matches the `prev_event` we're inserting next to):
```
# Tests from https://github.com/matrix-org/complement/pull/206
$ COMPLEMENT_ALWAYS_PRINT_SERVER_LOGS=1 COMPLEMENT_DIR=../complement ./scripts-dev/complement.sh TestBackfillingHistory/parallel/should_resolve_member_state_events_for_historical_events
create_new_client_event m.room.member event=$PWomJ8PwENYEYuVNoG30gqtybuQQSZ55eldBUSs0i0U state_group=None
create_new_client_event org.matrix.msc2716.insertion event=$e_mCU7Eah9ABF6nQU7lu4E1RxIWccNF05AKaTT5m3lw state_group=9
create_new_client_event org.matrix.msc2716.insertion event=$ui7A3_GdXIcJq0C8GpyrF8X7B3DTjMd_WGCjogax7xU state_group=10
create_new_client_event m.room.message event=$EnTIM5rEGVezQJiYl62uFBl6kJ7B-sMxWqe2D_4FX1I state_group=10
create_new_client_event m.room.message event=$LGx5jGONnBPuNhAuZqHeEoXChd9ryVkuTZatGisOPjk state_group=10
create_new_client_event m.room.message event=$wW0zwoN50lbLu1KoKbybVMxLbKUj7GV_olozIc5i3M0 state_group=10
create_new_client_event org.matrix.msc2716.batch event=$5ZB6dtzqFBCEuMRgpkU201Qhx3WtXZGTz_YgldL6JrQ state_group=10
```
The following scenarios would halt the user directory updater:
- user joins room
- user leaves room
- user present in room which switches from private to public, or vice versa.
for two classes of users:
- appservice senders
- users missing from the user table.
If this happened, the user directory would be stuck, unable to make forward progress.
Exclude both cases from the user directory, so that we ignore them.
Co-authored-by: Eric Eastwood <erice@element.io>
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
The race allowed the current position to advance too far when stream IDs
are still being persisted.
This happened when it received a new stream ID from a remote write
between a new stream ID being allocated and it being added to the set of
unpersisted stream IDs.
Fixes#9424.
Make `get_last_client_by_ip` return the same dictionary structure
regardless of whether the data has been persisted to the database.
This change will allow slightly cleaner type hints to be applied later
on.
Updating mypy past version 0.9 means that third-party stubs are no-longer distributed with typeshed. See http://mypy-lang.blogspot.com/2021/06/mypy-0900-released.html for details.
We therefore pull in stub packages in setup.py
Additionally, some modules that we were previously ignoring import failures for now have stubs. So let's use them.
The rest of this change consists of fixups to make the newer mypy + stubs pass CI.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
There are two steps to rebuilding the user directory:
1. a scan over rooms, followed by
2. a scan over local users.
The former reads avatars and display names from the `room_memberships`
table and therefore contains potentially private avatars and
display names. The latter reads from the the `profiles` table which only
contains public data; moreover it will overwrite any private profiles
that the rooms scan may have written to the user directory. This means
that the rebuild could leak private user while the rebuild was in
progress, only to later cover up the leaks once the rebuild had completed.
This change skips over local users when writing user_directory rows
when scanning rooms. Doing so means that it'll take longer for a rebuild
to make local users searchable, which is unfortunate. I think a future
PR can improve this by swapping the order of the two steps above. (And
indeed there's more to do here, e.g. copying from `profiles` without
going via Python.)
Small tidy-ups while I'm here:
* Remove duplicated code from test_initial. This was meant to be pulled into `purge_and_rebuild_user_dir`.
* Move `is_public` before updating sharing tables. No functional change; it's still before the first read of `is_public`.
* Don't bother creating a set from dict keys. Slightly nicer and makes the code simpler.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
We correctly allowed using the MSC2716 batch endpoint for
the room creator in existing room versions but accidentally didn't track
the events because of a logic flaw.
This prevented you from connecting subsequent chunks together because it would
throw the unknown batch ID error.
We only want to process MSC2716 events when:
- The room version supports MSC2716
- Any room where the homeserver has the `msc2716_enabled` experimental feature enabled and the event is from the room creator
* add test
* add function to remove user from monthly active table in deactivate code
* add function to remove user from monthly active table
* add changelog entry
* update changelog number
* requested changes
* update docstring on new function
* fix lint error
* Update synapse/storage/databases/main/monthly_active_users.py
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdVkXOgzrGzds0jtrHgFcFF8ZFs0FAmFbCRUACgkQHgFcFF8Z
Fs1n2Q/+P6WZmqNPEyPb4zgEhHgBZtAiYsS8i+6TBdu/viricfe3xmiifmKYyblV
C07a8Qu14OMgmXKYR8AY0HvLRx+zdhJFGuYa3I0+yY1GTlQWlf+OKnQtsbgdmJ6O
b8HbmGB1qJCJ0rbbWhCQvx/XXlqqMIATc6qJj3HTwOpWxNL8TymOFg6TGtb+rLkN
/s2NfxWPJqKMKTLVgZUVjkNGBBtJmu/+Ow3PYz7J9hEW69REONed/014wVgiWx+W
BJOoUj8dHAS5ZhdKWiSKAzl5A9FQyxUPDwkO44wsK5OIu+dVy4eF9HCMi0EP/9nT
G3VWwr3z/TA55foL8XdrIPdp1SFqJmIEwDLgaibISD1/8MoC15YzAkt4CoKYOsL6
EQtDDQal1BNSFZPITz7PWSFGOMgN3tKfMQUqCC+eagHvNfSxVH+J1zNg7ve2/24h
PbRU/tt4mJiPu7M2Ejj0EWNHyI2fp92ARzzAzQ0JlrPJe34Z/hAiqf7w4kjtJ7Ew
Lm890EAw2azo7RYU9xevkOsU2CEtLEnKsGMW8pJc9eRxUjRKfk/EW39dCQq9Myhu
uQFeYHALcn4vu9jGhGyoO9fJDKIxpM76h37Cwu7shg84Gp2ZwucSjwW2l2rZKiIS
YUeruLOavUueUZYTcyXxAqAAsH8z1hbKmnXIbNxFrcu+NOl+o84=
=HR3N
-----END PGP SIGNATURE-----
Merge tag 'v1.44.0rc3' into develop
Synapse 1.44.0rc3 (2021-10-04)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
