Commit Graph

431 Commits

Author SHA1 Message Date
Richard van der Hoff
4d1afb1dfe
Merge pull request #7519 from matrix-org/rav/kill_py2_code
Kill off some old python 2 code
2020-05-18 10:45:30 +01:00
Richard van der Hoff
91f51c611c remove redundant __func__
this is a no-op under python 3
2020-05-15 19:37:41 +01:00
Richard van der Hoff
6c1f7c722f
Fix limit logic for AccountDataStream (#7384)
Make sure that the AccountDataStream presents complete updates, in the right
order.

This is much the same fix as #7337 and #7358, but applied to a different stream.
2020-05-15 19:03:25 +01:00
Erik Johnston
1f36ff69e8
Move event stream handling out of slave store. (#7491)
This allows us to have the logic on both master and workers, which is necessary to move event persistence off master.

We also combine the instantiation of ID generators from DataStore and slave stores to the base worker stores. This allows us to select which process writes events independently of the master/worker splits.
2020-05-15 16:43:59 +01:00
Erik Johnston
4734a7bbe4
Move EventStream handling into default ReplicationDataHandler (#7493)
This is so that the logic can happen on both master and workers when we move event persistence out.
2020-05-14 14:01:39 +01:00
Erik Johnston
1de36407d1
Add instance_map config and route replication calls (#7495) 2020-05-14 14:00:58 +01:00
Erik Johnston
7ee24c5674
Have all instances correctly respond to REPLICATE command. (#7475)
Before all streams were only written to from master, so only master needed to respond to `REPLICATE` commands.

Before all instances wrote to the cache invalidation stream, but didn't respond to `REPLICATE`. This was a bug, which could lead to missed rows from cache invalidation stream if an instance is restarted, however all the caches would be empty in that case so it wasn't a problem.
2020-05-13 10:27:02 +01:00
Erik Johnston
8ca79613e6
Fix Redis reconnection logic (#7482)
Proactively send out `POSITION` commands (as if we had just received a `REPLICATE`) when we connect to Redis. This is important as other instances won't notice we've connected to issue a `REPLICATE` command (unlike for direct TCP connections). This is only currently an issue if master process reconnects without restarting (if it restarts then it won't have written anything and so other instances probably won't have missed anything).
2020-05-13 09:57:15 +01:00
Amber Brown
7cb8b4bc67
Allow configuration of Synapse's cache without using synctl or environment variables (#6391) 2020-05-11 18:45:23 +01:00
Andrew Morgan
5cf758cdd6 Merge branch 'release-v1.13.0' into develop
* release-v1.13.0:
  Don't UPGRADE database rows
  RST indenting
  Put rollback instructions in upgrade notes
  Fix changelog typo
  Oh yeah, RST
  Absolute URL it is then
  Fix upgrade notes link
  Provide summary of upgrade issues in changelog. Fix )
  Move next version notes from changelog to upgrade notes
  Changelog fixes
  1.13.0rc1
  Documentation on setting up redis (#7446)
  Rework UI Auth session validation for registration (#7455)
  Fix errors from malformed log line (#7454)
  Drop support for redis.dbid (#7450)
2020-05-11 16:46:33 +01:00
Richard van der Hoff
aa5aa6f96a
Fix errors from malformed log line (#7454) 2020-05-07 19:51:38 +01:00
Richard van der Hoff
da9b2db3af
Drop support for redis.dbid (#7450)
Since we only use pubsub, the dbid is irrelevant.
2020-05-07 16:46:15 +01:00
Erik Johnston
d7983b63a6
Support any process writing to cache invalidation stream. (#7436) 2020-05-07 13:51:08 +01:00
Richard van der Hoff
62ee862119 Merge branch 'release-v1.13.0' into develop 2020-05-06 15:56:03 +01:00
Richard van der Hoff
2e0c46ca07 Merge branch 'release-v1.13.0' into develop 2020-05-06 11:58:31 +01:00
Richard van der Hoff
a8c17da245 Merge branch 'release-v1.13.0' into rav/fix_dropped_messages 2020-05-05 23:01:12 +01:00
Richard van der Hoff
1242267316 Merge branch 'release-v1.13.0' into rav/fix_dropped_messages 2020-05-05 22:38:44 +01:00
Richard van der Hoff
7f7eedbebb Wait for a POSITION on the right connection before accepting RDATA
... otherwise we can believe we're up to date when we're not.
2020-05-05 22:38:16 +01:00
Brendan Abolivier
5b8023dc7f
Move logs about discarded RDATA to debug (#7421) 2020-05-05 21:07:33 +02:00
Richard van der Hoff
d78265af0c Wait to subscribe before sending REPLICATE 2020-05-05 19:31:37 +01:00
Richard van der Hoff
d5aa7d93ed
Fix catchup-on-reconnect for the Federation Stream (#7374)
looks like we managed to break this during the refactorathon.
2020-05-05 14:15:57 +01:00
Erik Johnston
350421e058
Fix redis password support. (#7401)
We forgot to set the password on the subscriber connection, as well as
not calling super methods for overridden connectionMade/connectionLost
functions.
2020-05-04 14:04:09 +01:00
Erik Johnston
0e719f2398
Thread through instance name to replication client. (#7369)
For in memory streams when fetching updates on workers we need to query the source of the stream, which currently is hard coded to be master. This PR threads through the source instance we received via `POSITION` through to the update function in each stream, which can then be passed to the replication client for in memory streams.
2020-05-01 17:19:56 +01:00
Erik Johnston
3085cde577
Use stream.current_token() and remove stream_positions() (#7172)
We move the processing of typing and federation replication traffic into their handlers so that `Stream.current_token()` points to a valid token. This allows us to remove `get_streams_to_replicate()` and `stream_positions()`.
2020-05-01 15:21:35 +01:00
Richard van der Hoff
b2dba06079
Workaround for assertion errors from db_query_to_update_function (#7378)
Hopefully this is no worse than what we have on master...
2020-05-01 09:25:16 +01:00
Erik Johnston
37f6823f5b
Add instance name to RDATA/POSITION commands (#7364)
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
2020-04-29 16:23:08 +01:00
Erik Johnston
3eab76ad43
Don't relay REMOTE_SERVER_UP cmds to same conn. (#7352)
For direct TCP connections we need the master to relay REMOTE_SERVER_UP
commands to the other connections so that all instances get notified
about it. The old implementation just relayed to all connections,
assuming that sending back to the original sender of the command was
safe. This is not true for redis, where commands sent get echoed back to
the sender, which was causing master to effectively infinite loop
sending and then re-receiving REMOTE_SERVER_UP commands that it sent.

The fix is to ensure that we only relay to *other* connections and not
to the connection we received the notification from.

Fixes #7334.
2020-04-29 14:10:59 +01:00
Richard van der Hoff
c2e1a2110f
Fix limit logic for EventsStream (#7358)
* Factor out functions for injecting events into database

I want to add some more flexibility to the tools for injecting events into the
database, and I don't want to clutter up HomeserverTestCase with them, so let's
factor them out to a new file.

* Rework TestReplicationDataHandler

This wasn't very easy to work with: the mock wrapping was largely superfluous,
and it's useful to be able to inspect the received rows, and clear out the
received list.

* Fix AssertionErrors being thrown by EventsStream

Part of the problem was that there was an off-by-one error in the assertion,
but also the limit logic was too simple. Fix it all up and add some tests.
2020-04-29 12:30:36 +01:00
Erik Johnston
38919b521e
Run replication streamers on workers (#7146)
Currently we never write to streams from workers, but that will change soon
2020-04-28 13:34:12 +01:00
Richard van der Hoff
ce428a1abe Fix EventsStream raising assertions when it falls behind
Figuring out how to correctly limit updates from this stream without dropping
entries is far more complicated than just counting the number of rows being
returned. We need to consider each query separately and, if any one query hits
the limit, truncate the results from the others.

I think this also fixes some potentially long-standing bugs where events or
state changes could get missed if we hit the limit on either query.
2020-04-24 13:59:21 +01:00
Richard van der Hoff
9cbdfb3a2f Make it clear that the limit for an update_function is a target 2020-04-23 15:45:12 +01:00
Richard van der Hoff
23b28266ac Remove 'limit' param from get_repl_stream_updates API
there doesn't seem to be much point in passing this limit all around, since
both sides agree it's meant to be 100.
2020-04-23 15:44:35 +01:00
Richard van der Hoff
71a1abb8a1
Stop the master relaying USER_SYNC for other workers (#7318)
Long story short: if we're handling presence on the current worker, we shouldn't be sending USER_SYNC commands over replication.

In an attempt to figure out what is going on here, I ended up refactoring some bits of the presencehandler code, so the first 4 commits here are non-functional refactors to move this code slightly closer to sanity. (There's still plenty to do here :/). Suggest reviewing individual commits.

Fixes (I hope) #7257.
2020-04-22 22:39:04 +01:00
Erik Johnston
841c581c40
Fix replication metrics when using redis (#7325) 2020-04-22 16:26:19 +01:00
Richard van der Hoff
82d8b1dd1f
Another go at fixing one-word commands (#7326)
I messed this up last time I tried (#7239 / e13c6c7).
2020-04-22 14:34:31 +01:00
Erik Johnston
51f7eaf908
Add ability to run replication protocol over redis. (#7040)
This is configured via the `redis` config options.
2020-04-22 13:07:41 +01:00
Richard van der Hoff
0f8f02bc39
On catchup, process each row with its own stream id (#7286)
Other parts of the code (such as the StreamChangeCache) assume that there will
not be multiple changes with the same stream id.

This code was introduced in #7024, and I hope this fixes #7206.
2020-04-20 11:43:29 +01:00
Richard van der Hoff
67ff7b8ba0
Improve type checking in replication.tcp.Stream (#7291)
The general idea here is to get rid of the type: ignore annotations on all of the current_token and update_function assignments, which would have caught #7290.

After a bit of experimentation, it seems like the least-awful way to do this is to pass the offending functions in as parameters to the Stream constructor. Unfortunately that means that the concrete implementations no longer have the same constructor signature as Stream itself, which means that it gets hard to correctly annotate STREAMS_MAP.

I've also introduced a couple of new types, to take out some duplication.
2020-04-17 14:49:55 +01:00
Richard van der Hoff
d7d42387f5
Fix 'generator object is not subscriptable' error (#7290)
Some of the query functions return generators rather than lists, so we can't
index into the result. Happily we already have a copy of the results.

(think this was introduced in #7024)
2020-04-16 14:37:06 +01:00
Richard van der Hoff
e13c6c7a96 Handle one-word replication commands correctly
`REPLICATE` is now a valid command, and it's nice if you can issue it from the
console without remembering to call it `REPLICATE ` with a trailing space.
2020-04-07 17:43:46 +01:00
Richard van der Hoff
c3e4b4edb2 Fix warnings about not calling superclass constructor
Separate `SimpleCommand` from `Command`, so that things which don't want to use
the `data` property don't have to, and thus fix the warnings PyCharm was giving
me about not calling `__init__` in the base class.
2020-04-07 17:40:22 +01:00
Richard van der Hoff
6a519a0ca0 Remove vestigal references to SYNC replication command
We've ripped pretty much all of this out: let's remove the remains.
2020-04-07 17:40:07 +01:00
Erik Johnston
ce72355d7f
Fix race in replication (#7226)
Fixes a race between handling `POSITION` and `RDATA` commands. We do this by simply linearizing handling of them.
2020-04-07 11:01:04 +01:00
Erik Johnston
82498ee901
Move server command handling out of TCP protocol (#7187)
This completes the merging of server and client command processing.
2020-04-07 10:51:07 +01:00
Erik Johnston
5016b162fc
Move client command handling out of TCP protocol (#7185)
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
2020-04-06 09:58:42 +01:00
Erik Johnston
dfa0782254
Remove connections per replication stream metric. (#7195)
This broke in a recent PR (#7024) and is no longer useful due to all
replication clients implicitly subscribing to all streams, so let's
just remove it.
2020-04-01 10:40:46 +01:00
Erik Johnston
4f21c33be3
Remove usage of "conn_id" for presence. (#7128)
* Remove `conn_id` usage for UserSyncCommand.

Each tcp replication connection is assigned a "conn_id", which is used
to give an ID to a remotely connected worker. In a redis world, there
will no longer be a one to one mapping between connection and instance,
so instead we need to replace such usages with an ID generated by the
remote instances and included in the replicaiton commands.

This really only effects UserSyncCommand.

* Add CLEAR_USER_SYNCS command that is sent on shutdown.

This should help with the case where a synchrotron gets restarted
gracefully, rather than rely on 5 minute timeout.
2020-03-30 16:37:24 +01:00
Erik Johnston
4cff617df1
Move catchup of replication streams to worker. (#7024)
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
2020-03-25 14:54:01 +00:00
Richard van der Hoff
a564b92d37
Convert *StreamRow classes to inner classes (#7116)
This just helps keep the rows closer to their streams, so that it's easier to
see what the format of each stream is.
2020-03-23 13:59:11 +00:00
Richard van der Hoff
b3cee0ce67
Fix processing of groups stream, and use symbolic names for streams (#7117)
`groups` != `receipts`

Introduced in #6964
2020-03-23 11:39:36 +00:00