Synapse can be quite memory intensive, and unless care is taken to tune
the GC thresholds it can end up thrashing, causing noticable performance
problems for large servers. We fix this by limiting how often we GC a
given generation, regardless of current counts/thresholds.
This does not help with the reverse problem where the thresholds are set
too high, but that should only happen in situations where they've been
manually configured.
Adds a `gc_min_seconds_between` config option to override the defaults.
Fixes#9890.
This leaves out all optional keys from /sync. This should be fine for all clients tested against conduit already, but it may break some clients, as such we should check, that at least most of them don't break horribly and maybe back out some of the individual changes. (We can probably always leave out groups for example, while the others may cause more issues.)
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Support the delete of a room through DELETE request and mark
previous request as deprecated through documentation.
Signed-off-by: Thibault Ferrante <thibault.ferrante@pm.me>
This fixes a regression where the logging context for runWithConnection
was reported as runWithConnection instead of the connection name,
e.g. "POST-XYZ".
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
This ensures that something like an auth error (403) will be
returned to the requester instead of attempting to try more
servers, which will likely result in the same error, and then
passing back a generic 400 error.
Applied a (slightly modified) patch from https://github.com/matrix-org/synapse/issues/9574.
As far as I understand this would allow the cookie set during the OIDC flow to work on deployments using public baseurls that do not sit at the URL path root.
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
As far as I can tell our logging contexts are meant to log the request ID, or sometimes the request ID followed by a suffix (this is generally stored in the name field of LoggingContext). There's also code to log the name@memory location, but I'm not sure this is ever used.
This simplifies the code paths to require every logging context to have a name and use that in logging. For sub-contexts (created via nested_logging_contexts, defer_to_threadpool, Measure) we use the current context's str (which becomes their name or the string "sentinel") and then potentially modify that (e.g. add a suffix).
This attempts to be a direct port of https://github.com/matrix-org/synapse-dinsic/pull/74 to mainline. There was some fiddling required to deal with the changes that have been made to mainline since (mainly dealing with the split of `RegistrationWorkerStore` from `RegistrationStore`, and the changes made to `self.make_request` in test code).
When receiving a /send_join request for a room with join rules set to 'restricted',
check if the user is a member of the spaces defined in the 'allow' key of the join
rules.
This only applies to an experimental room version, as defined in MSC3083.
This basically speeds up federation by "squeezing" each individual dual database call (to destinations and destination_rooms), which previously happened per every event, into one call for an entire batch (100 max).
Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
This change ensures that the appservice registration behaviour follows the spec. We decided to do this for Dendrite, so it made sense to also make a PR for synapse to correct the behaviour.
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
We pull all destinations requiring catchup from the DB in batches.
However, if all those destinations get filtered out (due to the
federation sender being sharded), then the `last_processed` destination
doesn't get updated, and we keep requesting the same set repeatedly.
When joining a room with join rules set to 'restricted', check if the
user is a member of the spaces defined in the 'allow' key of the join rules.
This only applies to an experimental room version, as defined in MSC3083.
This PR modifies `GaugeBucketCollector` to only report data once it has been updated, rather than initially reporting a value of 0. Fixes zero values being reported for some metrics on startup until a background job to update the metric's value runs later.
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
The `remote_media_cache_thumbnails_media_origin_media_id_thumbna_key`
constraint is superceded by
`remote_media_repository_thumbn_media_origin_id_width_height_met` (which adds
`thumbnail_method` to the unique key).
PR #7124 made an attempt to remove the old constraint, but got the name wrong,
so it didn't work. Here we update the bg update and rerun it.
Fixes#8649.
The regex should be terminated so that subdomain matches of another
domain are not accepted. Just ensuring that someone doesn't shoot
themselves in the foot by copying our example.
Signed-off-by: Denis Kasak <dkasak@termina.org.uk>
`room_invite_state_types` was inconvenient as a configuration setting, because
anyone that ever set it would not receive any new types that were added to the
defaults. Here, we deprecate the old setting, and replace it with a couple of
new settings under `room_prejoin_state`.
This should fix a class of bug where we forget to check if e.g. the appservice shouldn't be ratelimited.
We also check the `ratelimit_override` table to check if the user has ratelimiting disabled. That table is really only meant to override the event sender ratelimiting, so we don't use any values from it (as they might not make sense for different rate limits), but we do infer that if ratelimiting is disabled for the user we should disabled all ratelimits.
Fixes#9663
I've reiterated the advice about using `oidc` to migrate, since I've seen a few
people caught by this.
I've also removed a couple of the examples as they are duplicating the OIDC
documentation, and I think they might be leading people astray.
If you have the wrong version of `cryptography` installed, synapse suggests:
```
To install run:
pip install --upgrade --force 'cryptography>=3.4.7;python_version>='3.6''
```
However, the use of ' inside '...' doesn't work, so when you run this, you get
an error.
Running `dmypy run` will do a `mypy` check while spinning up a daemon
that makes rerunning `dmypy run` a lot faster.
`dmypy` doesn't support `follow_imports = silent` and has
`local_partial_types` enabled, so this PR enables those options and
fixes the issues that were newly raised. Note that `local_partial_types`
will be enabled by default in upcoming mypy releases.
Split off from https://github.com/matrix-org/synapse/pull/9491
Adds a storage method for getting the current presence of all local users, optionally excluding those that are offline. This will be used by the code in #9491 when a PresenceRouter module informs Synapse that a given user should have `"ALL"` user presence updates routed to them. Specifically, it is used here: b588f16e39/synapse/handlers/presence.py (L1131-L1133)
Note that there is a `get_all_presence_updates` function just above. That function is intended to walk up the table through stream IDs, and is primarily used by the presence replication stream. I could possibly make use of it in the PresenceRouter-related code, but it would be a bit of a bodge.
Builds on the work done in #9643 to add a federation API for space summaries.
There's a bit of refactoring of the existing client-server code first, to avoid too much duplication.
Currently federation catchup will send the last *local* event that we
failed to send to the remote. This can cause issues for large rooms
where lots of servers have sent events while the remote server was down,
as when it comes back up again it'll be flooded with events from various
points in the DAG.
Instead, let's make it so that all the servers send the most recent
events, even if its not theirs. The remote should deduplicate the
events, so there shouldn't be much overhead in doing this.
Alternatively, the servers could only send local events if they were
also extremities and hope that the other server will send the event
over, but that is a bit risky.
This bug was discovered by DINUM. We were modifying `serialized_event["content"]`, which - if you've got `USE_FROZEN_DICTS` turned on or are [using a third party rules module](17cd48fe51/synapse/events/third_party_rules.py (L73-L76)) - will raise a 500 if you try to a edit a reply to a message.
`serialized_event["content"]` could be set to the edit event's content, instead of a copy of it, which is bad as we attempt to modify it. Instead, we also end up modifying the original event's content. DINUM uses a third party rules module, which meant the event's content got frozen and thus an exception was raised.
To be clear, the problem is not that the event's content was frozen. In fact doing so helped us uncover the fact we weren't copying event content correctly.
We had two functions named `get_forward_extremities_for_room` and
`get_forward_extremeties_for_room` that took different paramters. We
rename one of them to avoid confusion.
* Populate `internal_metadata.outlier` based on `events` table
Rather than relying on `outlier` being in the `internal_metadata` column,
populate it based on the `events.outlier` column.
* Move `outlier` out of InternalMetadata._dict
Ultimately, this will allow us to stop writing it to the database. For now, we
have to grandfather it back in so as to maintain compatibility with older
versions of Synapse.
Instead of if the user does not have a password hash. This allows a SSO
user to add a password to their account, but only if the local password
database is configured.
Fixes https://github.com/matrix-org/synapse/issues/9572
When a SSO user logs in for the first time, we create a local Matrix user for them. This goes through the register_user flow, which ends up triggering the spam checker. Spam checker modules don't currently have any way to differentiate between a user trying to sign up initially, versus an SSO user (whom has presumably already been approved elsewhere) trying to log in for the first time.
This PR passes `auth_provider_id` as an argument to the `check_registration_for_spam` function. This argument will contain an ID of an SSO provider (`"saml"`, `"cas"`, etc.) if one was used, else `None`.
Federation catch up mode is very inefficient if the number of events
that the remote server has missed is small, since handling gaps can be
very expensive, c.f. #9492.
Instead of going into catch up mode whenever we see an error, we instead
do so only if we've backed off from trying the remote for more than an
hour (the assumption being that in such a case it is more than a
transient failure).
Background: When we receive incoming federation traffic, and notice that we are missing prev_events from
the incoming traffic, first we do a `/get_missing_events` request, and then if we still have missing prev_events,
we set up new backwards-extremities. To do that, we need to make a `/state_ids` request to ask the remote
server for the state at those prev_events, and then we may need to then ask the remote server for any events
in that state which we don't already have, as well as the auth events for those missing state events, so that we
can auth them.
This PR attempts to optimise the processing of that state request. The `state_ids` API returns a list of the state
events, as well as a list of all the auth events for *all* of those state events. The optimisation comes from the
observation that we are currently loading all of those auth events into memory at the start of the operation, but
we almost certainly aren't going to need *all* of the auth events. Rather, we can check that we have them, and
leave the actual load into memory for later. (Ideally the federation API would tell us which auth events we're
actually going to need, but it doesn't.)
The effect of this is to reduce the number of events that I need to load for an event in Matrix HQ from about
60000 to about 22000, which means it can stay in my in-memory cache, whereas previously the sheer number
of events meant that all 60K events had to be loaded from db for each request, due to the amount of cache
churn. (NB I've already tripled the size of the cache from its default of 10K).
Unfortunately I've ended up basically C&Ping `_get_state_for_room` and `_get_events_from_store_or_dest` into
a new method, because `_get_state_for_room` is also called during backfill, which expects the auth events to be
returned, so the same tricks don't work. That said, I don't really know why that codepath is completely different
(ultimately we're doing the same thing in setting up a new backwards extremity) so I've left a TODO suggesting
that we clean it up.
