Improve code formatting and fix a few typos in docs (#11221)

* Labeled a lot more code blocks with the appropriate type
* Fixed a couple of minor typos (missing/extraneous commas)

Signed-off-by: Sumner Evans <me@sumnerevans.com>
This commit is contained in:
Sumner Evans 2021-11-01 05:35:55 -06:00 committed by GitHub
parent 82d2168a15
commit ece84f2c45
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
20 changed files with 229 additions and 164 deletions

1
changelog.d/11221.doc Normal file
View File

@ -0,0 +1 @@
Improve code formatting and fix a few typos in docs. Contributed by @sumnerevans at Beeper.

View File

@ -15,12 +15,12 @@ in `homeserver.yaml`, to the list of authorized domains. If you have not set
1. Agree to the terms of service and submit. 1. Agree to the terms of service and submit.
1. Copy your site key and secret key and add them to your `homeserver.yaml` 1. Copy your site key and secret key and add them to your `homeserver.yaml`
configuration file configuration file
``` ```yaml
recaptcha_public_key: YOUR_SITE_KEY recaptcha_public_key: YOUR_SITE_KEY
recaptcha_private_key: YOUR_SECRET_KEY recaptcha_private_key: YOUR_SECRET_KEY
``` ```
1. Enable the CAPTCHA for new registrations 1. Enable the CAPTCHA for new registrations
``` ```yaml
enable_registration_captcha: true enable_registration_captcha: true
``` ```
1. Go to the settings page for the CAPTCHA you just created 1. Go to the settings page for the CAPTCHA you just created

View File

@ -99,7 +99,7 @@ server admin: see [Admin API](../usage/administration/admin_api).
It returns a JSON body like the following: It returns a JSON body like the following:
```jsonc ```json
{ {
"event_id": "$bNUFCwGzWca1meCGkjp-zwslF-GfVcXukvRLI1_FaVY", "event_id": "$bNUFCwGzWca1meCGkjp-zwslF-GfVcXukvRLI1_FaVY",
"event_json": { "event_json": {
@ -132,7 +132,7 @@ It returns a JSON body like the following:
}, },
"type": "m.room.message", "type": "m.room.message",
"unsigned": { "unsigned": {
"age_ts": 1592291711430, "age_ts": 1592291711430
} }
}, },
"id": <report_id>, "id": <report_id>,

View File

@ -27,7 +27,7 @@ Room state data (such as joins, leaves, topic) is always preserved.
To delete local message events as well, set `delete_local_events` in the body: To delete local message events as well, set `delete_local_events` in the body:
``` ```json
{ {
"delete_local_events": true "delete_local_events": true
} }

View File

@ -28,7 +28,7 @@ server admin: see [Admin API](../usage/administration/admin_api).
Response: Response:
``` ```json
{ {
"room_id": "!636q39766251:server.com" "room_id": "!636q39766251:server.com"
} }

View File

@ -87,7 +87,7 @@ GET /_synapse/admin/v1/rooms
A response body like the following is returned: A response body like the following is returned:
```jsonc ```json
{ {
"rooms": [ "rooms": [
{ {
@ -170,7 +170,7 @@ GET /_synapse/admin/v1/rooms?order_by=size
A response body like the following is returned: A response body like the following is returned:
```jsonc ```json
{ {
"rooms": [ "rooms": [
{ {
@ -208,7 +208,7 @@ A response body like the following is returned:
} }
], ],
"offset": 0, "offset": 0,
"total_rooms": 150 "total_rooms": 150,
"next_token": 100 "next_token": 100
} }
``` ```
@ -224,7 +224,7 @@ GET /_synapse/admin/v1/rooms?order_by=size&from=100
A response body like the following is returned: A response body like the following is returned:
```jsonc ```json
{ {
"rooms": [ "rooms": [
{ {

View File

@ -10,7 +10,9 @@ The necessary tools are detailed below.
First install them with: First install them with:
pip install -e ".[lint,mypy]" ```sh
pip install -e ".[lint,mypy]"
```
- **black** - **black**
@ -21,7 +23,9 @@ First install them with:
Have `black` auto-format your code (it shouldn't change any Have `black` auto-format your code (it shouldn't change any
functionality) with: functionality) with:
black . --exclude="\.tox|build|env" ```sh
black . --exclude="\.tox|build|env"
```
- **flake8** - **flake8**
@ -30,7 +34,9 @@ First install them with:
Check all application and test code with: Check all application and test code with:
flake8 synapse tests ```sh
flake8 synapse tests
```
- **isort** - **isort**
@ -39,7 +45,9 @@ First install them with:
Auto-fix imports with: Auto-fix imports with:
isort -rc synapse tests ```sh
isort -rc synapse tests
```
`-rc` means to recursively search the given directories. `-rc` means to recursively search the given directories.
@ -66,15 +74,19 @@ save as it takes a while and is very resource intensive.
Example: Example:
from synapse.types import UserID ```python
... from synapse.types import UserID
user_id = UserID(local, server) ...
user_id = UserID(local, server)
```
is preferred over: is preferred over:
from synapse import types ```python
... from synapse import types
user_id = types.UserID(local, server) ...
user_id = types.UserID(local, server)
```
(or any other variant). (or any other variant).
@ -134,28 +146,30 @@ Some guidelines follow:
Example: Example:
## Frobnication ## ```yaml
## Frobnication ##
# The frobnicator will ensure that all requests are fully frobnicated. # The frobnicator will ensure that all requests are fully frobnicated.
# To enable it, uncomment the following. # To enable it, uncomment the following.
# #
#frobnicator_enabled: true #frobnicator_enabled: true
# By default, the frobnicator will frobnicate with the default frobber. # By default, the frobnicator will frobnicate with the default frobber.
# The following will make it use an alternative frobber. # The following will make it use an alternative frobber.
# #
#frobincator_frobber: special_frobber #frobincator_frobber: special_frobber
# Settings for the frobber # Settings for the frobber
# #
frobber: frobber:
# frobbing speed. Defaults to 1. # frobbing speed. Defaults to 1.
# #
#speed: 10 #speed: 10
# frobbing distance. Defaults to 1000. # frobbing distance. Defaults to 1000.
# #
#distance: 100 #distance: 100
```
Note that the sample configuration is generated from the synapse code Note that the sample configuration is generated from the synapse code
and is maintained by a script, `scripts-dev/generate_sample_config`. and is maintained by a script, `scripts-dev/generate_sample_config`.

View File

@ -99,7 +99,7 @@ construct URIs where users can give their consent.
see if an unauthenticated user is viewing the page. This is typically see if an unauthenticated user is viewing the page. This is typically
wrapped around the form that would be used to actually agree to the document: wrapped around the form that would be used to actually agree to the document:
``` ```html
{% if not public_version %} {% if not public_version %}
<!-- The variables used here are only provided when the 'u' param is given to the homeserver --> <!-- The variables used here are only provided when the 'u' param is given to the homeserver -->
<form method="post" action="consent"> <form method="post" action="consent">

View File

@ -91,4 +91,4 @@ is running a modern version of Synapse.
### Do I need the same certificate for the client and federation port? ### Do I need the same certificate for the client and federation port?
No. There is nothing stopping you from using different certificates, No. There is nothing stopping you from using different certificates,
particularly if you are using a reverse proxy. particularly if you are using a reverse proxy.

View File

@ -8,23 +8,23 @@ easy to run CAS implementation built on top of Django.
1. Create a new virtualenv: `python3 -m venv <your virtualenv>` 1. Create a new virtualenv: `python3 -m venv <your virtualenv>`
2. Activate your virtualenv: `source /path/to/your/virtualenv/bin/activate` 2. Activate your virtualenv: `source /path/to/your/virtualenv/bin/activate`
3. Install Django and django-mama-cas: 3. Install Django and django-mama-cas:
``` ```sh
python -m pip install "django<3" "django-mama-cas==2.4.0" python -m pip install "django<3" "django-mama-cas==2.4.0"
``` ```
4. Create a Django project in the current directory: 4. Create a Django project in the current directory:
``` ```sh
django-admin startproject cas_test . django-admin startproject cas_test .
``` ```
5. Follow the [install directions](https://django-mama-cas.readthedocs.io/en/latest/installation.html#configuring) for django-mama-cas 5. Follow the [install directions](https://django-mama-cas.readthedocs.io/en/latest/installation.html#configuring) for django-mama-cas
6. Setup the SQLite database: `python manage.py migrate` 6. Setup the SQLite database: `python manage.py migrate`
7. Create a user: 7. Create a user:
``` ```sh
python manage.py createsuperuser python manage.py createsuperuser
``` ```
1. Use whatever you want as the username and password. 1. Use whatever you want as the username and password.
2. Leave the other fields blank. 2. Leave the other fields blank.
8. Use the built-in Django test server to serve the CAS endpoints on port 8000: 8. Use the built-in Django test server to serve the CAS endpoints on port 8000:
``` ```sh
python manage.py runserver python manage.py runserver
``` ```

View File

@ -89,7 +89,9 @@ To do so, use `scripts-dev/make_full_schema.sh`. This will produce new
Ensure postgres is installed, then run: Ensure postgres is installed, then run:
./scripts-dev/make_full_schema.sh -p postgres_username -o output_dir/ ```sh
./scripts-dev/make_full_schema.sh -p postgres_username -o output_dir/
```
NB at the time of writing, this script predates the split into separate `state`/`main` NB at the time of writing, this script predates the split into separate `state`/`main`
databases so will require updates to handle that correctly. databases so will require updates to handle that correctly.

View File

@ -15,7 +15,7 @@ To make Synapse (and therefore Element) use it:
sp_config: sp_config:
allow_unknown_attributes: true # Works around a bug with AVA Hashes: https://github.com/IdentityPython/pysaml2/issues/388 allow_unknown_attributes: true # Works around a bug with AVA Hashes: https://github.com/IdentityPython/pysaml2/issues/388
metadata: metadata:
local: ["samling.xml"] local: ["samling.xml"]
``` ```
5. Ensure that your `homeserver.yaml` has a setting for `public_baseurl`: 5. Ensure that your `homeserver.yaml` has a setting for `public_baseurl`:
```yaml ```yaml

View File

@ -69,9 +69,9 @@ A default policy can be defined as such, in the `retention` section of
the configuration file: the configuration file:
```yaml ```yaml
default_policy: default_policy:
min_lifetime: 1d min_lifetime: 1d
max_lifetime: 1y max_lifetime: 1y
``` ```
Here, `min_lifetime` and `max_lifetime` have the same meaning and level Here, `min_lifetime` and `max_lifetime` have the same meaning and level
@ -95,14 +95,14 @@ depending on an event's room's policy. This can be done by setting the
file. An example of such configuration could be: file. An example of such configuration could be:
```yaml ```yaml
purge_jobs: purge_jobs:
- longest_max_lifetime: 3d - longest_max_lifetime: 3d
interval: 12h interval: 12h
- shortest_max_lifetime: 3d - shortest_max_lifetime: 3d
longest_max_lifetime: 1w longest_max_lifetime: 1w
interval: 1d interval: 1d
- shortest_max_lifetime: 1w - shortest_max_lifetime: 1w
interval: 2d interval: 2d
``` ```
In this example, we define three jobs: In this example, we define three jobs:
@ -141,8 +141,8 @@ purging old events in a room. These limits can be defined as such in the
`retention` section of the configuration file: `retention` section of the configuration file:
```yaml ```yaml
allowed_lifetime_min: 1d allowed_lifetime_min: 1d
allowed_lifetime_max: 1y allowed_lifetime_max: 1y
``` ```
The limits are considered when running purge jobs. If necessary, the The limits are considered when running purge jobs. If necessary, the

View File

@ -10,7 +10,7 @@ registered by using the Module API's `register_password_auth_provider_callbacks`
_First introduced in Synapse v1.46.0_ _First introduced in Synapse v1.46.0_
``` ```python
auth_checkers: Dict[Tuple[str,Tuple], Callable] auth_checkers: Dict[Tuple[str,Tuple], Callable]
``` ```

View File

@ -29,16 +29,20 @@ connect to a postgres database.
Assuming your PostgreSQL database user is called `postgres`, first authenticate as the database user with: Assuming your PostgreSQL database user is called `postgres`, first authenticate as the database user with:
su - postgres ```sh
# Or, if your system uses sudo to get administrative rights su - postgres
sudo -u postgres bash # Or, if your system uses sudo to get administrative rights
sudo -u postgres bash
```
Then, create a postgres user and a database with: Then, create a postgres user and a database with:
# this will prompt for a password for the new user ```sh
createuser --pwprompt synapse_user # this will prompt for a password for the new user
createuser --pwprompt synapse_user
createdb --encoding=UTF8 --locale=C --template=template0 --owner=synapse_user synapse createdb --encoding=UTF8 --locale=C --template=template0 --owner=synapse_user synapse
```
The above will create a user called `synapse_user`, and a database called The above will create a user called `synapse_user`, and a database called
`synapse`. `synapse`.
@ -145,20 +149,26 @@ Firstly, shut down the currently running synapse server and copy its
database file (typically `homeserver.db`) to another location. Once the database file (typically `homeserver.db`) to another location. Once the
copy is complete, restart synapse. For instance: copy is complete, restart synapse. For instance:
./synctl stop ```sh
cp homeserver.db homeserver.db.snapshot ./synctl stop
./synctl start cp homeserver.db homeserver.db.snapshot
./synctl start
```
Copy the old config file into a new config file: Copy the old config file into a new config file:
cp homeserver.yaml homeserver-postgres.yaml ```sh
cp homeserver.yaml homeserver-postgres.yaml
```
Edit the database section as described in the section *Synapse config* Edit the database section as described in the section *Synapse config*
above and with the SQLite snapshot located at `homeserver.db.snapshot` above and with the SQLite snapshot located at `homeserver.db.snapshot`
simply run: simply run:
synapse_port_db --sqlite-database homeserver.db.snapshot \ ```sh
--postgres-config homeserver-postgres.yaml synapse_port_db --sqlite-database homeserver.db.snapshot \
--postgres-config homeserver-postgres.yaml
```
The flag `--curses` displays a coloured curses progress UI. The flag `--curses` displays a coloured curses progress UI.
@ -170,16 +180,20 @@ To complete the conversion shut down the synapse server and run the port
script one last time, e.g. if the SQLite database is at `homeserver.db` script one last time, e.g. if the SQLite database is at `homeserver.db`
run: run:
synapse_port_db --sqlite-database homeserver.db \ ```sh
--postgres-config homeserver-postgres.yaml synapse_port_db --sqlite-database homeserver.db \
--postgres-config homeserver-postgres.yaml
```
Once that has completed, change the synapse config to point at the Once that has completed, change the synapse config to point at the
PostgreSQL database configuration file `homeserver-postgres.yaml`: PostgreSQL database configuration file `homeserver-postgres.yaml`:
./synctl stop ```sh
mv homeserver.yaml homeserver-old-sqlite.yaml ./synctl stop
mv homeserver-postgres.yaml homeserver.yaml mv homeserver.yaml homeserver-old-sqlite.yaml
./synctl start mv homeserver-postgres.yaml homeserver.yaml
./synctl start
```
Synapse should now be running against PostgreSQL. Synapse should now be running against PostgreSQL.

View File

@ -52,7 +52,7 @@ to proxied traffic.)
### nginx ### nginx
``` ```nginx
server { server {
listen 443 ssl http2; listen 443 ssl http2;
listen [::]:443 ssl http2; listen [::]:443 ssl http2;
@ -141,7 +141,7 @@ matrix.example.com {
### Apache ### Apache
``` ```apache
<VirtualHost *:443> <VirtualHost *:443>
SSLEngine on SSLEngine on
ServerName matrix.example.com ServerName matrix.example.com
@ -170,7 +170,7 @@ matrix.example.com {
**NOTE 2**: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (`mod_security2`). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two `</VirtualHost>` above: **NOTE 2**: It appears that Synapse is currently incompatible with the ModSecurity module for Apache (`mod_security2`). If you need it enabled for other services on your web server, you can disable it for Synapse's two VirtualHosts by including the following lines before each of the two `</VirtualHost>` above:
``` ```apache
<IfModule security2_module> <IfModule security2_module>
SecRuleEngine off SecRuleEngine off
</IfModule> </IfModule>

View File

@ -20,7 +20,9 @@ Finally, to actually run your worker-based synapse, you must pass synctl the `-a
commandline option to tell it to operate on all the worker configurations found commandline option to tell it to operate on all the worker configurations found
in the given directory, e.g.: in the given directory, e.g.:
synctl -a $CONFIG/workers start ```sh
synctl -a $CONFIG/workers start
```
Currently one should always restart all workers when restarting or upgrading Currently one should always restart all workers when restarting or upgrading
synapse, unless you explicitly know it's safe not to. For instance, restarting synapse, unless you explicitly know it's safe not to. For instance, restarting
@ -29,4 +31,6 @@ notifications.
To manipulate a specific worker, you pass the -w option to synctl: To manipulate a specific worker, you pass the -w option to synctl:
synctl -w $CONFIG/workers/worker1.yaml restart ```sh
synctl -w $CONFIG/workers/worker1.yaml restart
```

View File

@ -40,7 +40,9 @@ This will install and start a systemd service called `coturn`.
1. Configure it: 1. Configure it:
./configure ```sh
./configure
```
You may need to install `libevent2`: if so, you should do so in You may need to install `libevent2`: if so, you should do so in
the way recommended by your operating system. You can ignore the way recommended by your operating system. You can ignore
@ -49,22 +51,28 @@ This will install and start a systemd service called `coturn`.
1. Build and install it: 1. Build and install it:
make ```sh
make install make
make install
```
### Configuration ### Configuration
1. Create or edit the config file in `/etc/turnserver.conf`. The relevant 1. Create or edit the config file in `/etc/turnserver.conf`. The relevant
lines, with example values, are: lines, with example values, are:
use-auth-secret ```
static-auth-secret=[your secret key here] use-auth-secret
realm=turn.myserver.org static-auth-secret=[your secret key here]
realm=turn.myserver.org
```
See `turnserver.conf` for explanations of the options. One way to generate See `turnserver.conf` for explanations of the options. One way to generate
the `static-auth-secret` is with `pwgen`: the `static-auth-secret` is with `pwgen`:
pwgen -s 64 1 ```sh
pwgen -s 64 1
```
A `realm` must be specified, but its value is somewhat arbitrary. (It is A `realm` must be specified, but its value is somewhat arbitrary. (It is
sent to clients as part of the authentication flow.) It is conventional to sent to clients as part of the authentication flow.) It is conventional to
@ -73,7 +81,9 @@ This will install and start a systemd service called `coturn`.
1. You will most likely want to configure coturn to write logs somewhere. The 1. You will most likely want to configure coturn to write logs somewhere. The
easiest way is normally to send them to the syslog: easiest way is normally to send them to the syslog:
syslog ```sh
syslog
```
(in which case, the logs will be available via `journalctl -u coturn` on a (in which case, the logs will be available via `journalctl -u coturn` on a
systemd system). Alternatively, coturn can be configured to write to a systemd system). Alternatively, coturn can be configured to write to a
@ -83,31 +93,35 @@ This will install and start a systemd service called `coturn`.
connect to arbitrary IP addresses and ports. The following configuration is connect to arbitrary IP addresses and ports. The following configuration is
suggested as a minimum starting point: suggested as a minimum starting point:
# VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay. ```
no-tcp-relay # VoIP traffic is all UDP. There is no reason to let users connect to arbitrary TCP endpoints via the relay.
no-tcp-relay
# don't let the relay ever try to connect to private IP address ranges within your network (if any) # don't let the relay ever try to connect to private IP address ranges within your network (if any)
# given the turn server is likely behind your firewall, remember to include any privileged public IPs too. # given the turn server is likely behind your firewall, remember to include any privileged public IPs too.
denied-peer-ip=10.0.0.0-10.255.255.255 denied-peer-ip=10.0.0.0-10.255.255.255
denied-peer-ip=192.168.0.0-192.168.255.255 denied-peer-ip=192.168.0.0-192.168.255.255
denied-peer-ip=172.16.0.0-172.31.255.255 denied-peer-ip=172.16.0.0-172.31.255.255
# special case the turn server itself so that client->TURN->TURN->client flows work # special case the turn server itself so that client->TURN->TURN->client flows work
allowed-peer-ip=10.0.0.1 allowed-peer-ip=10.0.0.1
# consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS. # consider whether you want to limit the quota of relayed streams per user (or total) to avoid risk of DoS.
user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user. user-quota=12 # 4 streams per video call, so 12 streams = 3 simultaneous relayed calls per user.
total-quota=1200 total-quota=1200
```
1. Also consider supporting TLS/DTLS. To do this, add the following settings 1. Also consider supporting TLS/DTLS. To do this, add the following settings
to `turnserver.conf`: to `turnserver.conf`:
# TLS certificates, including intermediate certs. ```
# For Let's Encrypt certificates, use `fullchain.pem` here. # TLS certificates, including intermediate certs.
cert=/path/to/fullchain.pem # For Let's Encrypt certificates, use `fullchain.pem` here.
cert=/path/to/fullchain.pem
# TLS private key file # TLS private key file
pkey=/path/to/privkey.pem pkey=/path/to/privkey.pem
```
In this case, replace the `turn:` schemes in the `turn_uri` settings below In this case, replace the `turn:` schemes in the `turn_uri` settings below
with `turns:`. with `turns:`.
@ -126,7 +140,9 @@ This will install and start a systemd service called `coturn`.
If you want to try it anyway, you will at least need to tell coturn its If you want to try it anyway, you will at least need to tell coturn its
external IP address: external IP address:
external-ip=192.88.99.1 ```
external-ip=192.88.99.1
```
... and your NAT gateway must forward all of the relayed ports directly ... and your NAT gateway must forward all of the relayed ports directly
(eg, port 56789 on the external IP must be always be forwarded to port (eg, port 56789 on the external IP must be always be forwarded to port
@ -186,7 +202,7 @@ After updating the homeserver configuration, you must restart synapse:
./synctl restart ./synctl restart
``` ```
* If you use systemd: * If you use systemd:
``` ```sh
systemctl restart matrix-synapse.service systemctl restart matrix-synapse.service
``` ```
... and then reload any clients (or wait an hour for them to refresh their ... and then reload any clients (or wait an hour for them to refresh their

View File

@ -1176,16 +1176,20 @@ For more information on configuring TLS certificates see the
For users who have installed Synapse into a virtualenv, we recommend For users who have installed Synapse into a virtualenv, we recommend
doing this by creating a new virtualenv. For example: doing this by creating a new virtualenv. For example:
virtualenv -p python3 ~/synapse/env3 ```sh
source ~/synapse/env3/bin/activate virtualenv -p python3 ~/synapse/env3
pip install matrix-synapse source ~/synapse/env3/bin/activate
pip install matrix-synapse
```
You can then start synapse as normal, having activated the new You can then start synapse as normal, having activated the new
virtualenv: virtualenv:
cd ~/synapse ```sh
source env3/bin/activate cd ~/synapse
synctl start source env3/bin/activate
synctl start
```
Users who have installed from distribution packages should see the Users who have installed from distribution packages should see the
relevant package documentation. See below for notes on Debian relevant package documentation. See below for notes on Debian
@ -1197,34 +1201,38 @@ For more information on configuring TLS certificates see the
`<server>.log.config` file. For example, if your `log.config` `<server>.log.config` file. For example, if your `log.config`
file contains: file contains:
handlers: ```yaml
file: handlers:
class: logging.handlers.RotatingFileHandler file:
formatter: precise class: logging.handlers.RotatingFileHandler
filename: homeserver.log formatter: precise
maxBytes: 104857600 filename: homeserver.log
backupCount: 10 maxBytes: 104857600
filters: [context] backupCount: 10
console: filters: [context]
class: logging.StreamHandler console:
formatter: precise class: logging.StreamHandler
filters: [context] formatter: precise
filters: [context]
```
Then you should update this to be: Then you should update this to be:
handlers: ```yaml
file: handlers:
class: logging.handlers.RotatingFileHandler file:
formatter: precise class: logging.handlers.RotatingFileHandler
filename: homeserver.log formatter: precise
maxBytes: 104857600 filename: homeserver.log
backupCount: 10 maxBytes: 104857600
filters: [context] backupCount: 10
encoding: utf8 filters: [context]
console: encoding: utf8
class: logging.StreamHandler console:
formatter: precise class: logging.StreamHandler
filters: [context] formatter: precise
filters: [context]
```
There is no need to revert this change if downgrading to There is no need to revert this change if downgrading to
Python 2. Python 2.
@ -1310,24 +1318,28 @@ with the HS remotely has been removed.
It has been replaced by specifying a list of application service It has been replaced by specifying a list of application service
registrations in `homeserver.yaml`: registrations in `homeserver.yaml`:
app_service_config_files: ["registration-01.yaml", "registration-02.yaml"] ```yaml
app_service_config_files: ["registration-01.yaml", "registration-02.yaml"]
```
Where `registration-01.yaml` looks like: Where `registration-01.yaml` looks like:
url: <String> # e.g. "https://my.application.service.com" ```yaml
as_token: <String> url: <String> # e.g. "https://my.application.service.com"
hs_token: <String> as_token: <String>
sender_localpart: <String> # This is a new field which denotes the user_id localpart when using the AS token hs_token: <String>
namespaces: sender_localpart: <String> # This is a new field which denotes the user_id localpart when using the AS token
users: namespaces:
- exclusive: <Boolean> users:
regex: <String> # e.g. "@prefix_.*" - exclusive: <Boolean>
aliases: regex: <String> # e.g. "@prefix_.*"
- exclusive: <Boolean> aliases:
regex: <String> - exclusive: <Boolean>
rooms: regex: <String>
- exclusive: <Boolean> rooms:
regex: <String> - exclusive: <Boolean>
regex: <String>
```
# Upgrading to v0.8.0 # Upgrading to v0.8.0

View File

@ -443,19 +443,19 @@ In the `media_repository` worker configuration file, configure the http listener
expose the `media` resource. For example: expose the `media` resource. For example:
```yaml ```yaml
worker_listeners: worker_listeners:
- type: http - type: http
port: 8085 port: 8085
resources: resources:
- names: - names:
- media - media
``` ```
Note that if running multiple media repositories they must be on the same server Note that if running multiple media repositories they must be on the same server
and you must configure a single instance to run the background tasks, e.g.: and you must configure a single instance to run the background tasks, e.g.:
```yaml ```yaml
media_instance_running_background_jobs: "media-repository-1" media_instance_running_background_jobs: "media-repository-1"
``` ```
Note that if a reverse proxy is used , then `/_matrix/media/` must be routed for both inbound client and federation requests (if they are handled separately). Note that if a reverse proxy is used , then `/_matrix/media/` must be routed for both inbound client and federation requests (if they are handled separately).
@ -492,7 +492,9 @@ must therefore be configured with the location of the main instance, via
the `worker_main_http_uri` setting in the `frontend_proxy` worker configuration the `worker_main_http_uri` setting in the `frontend_proxy` worker configuration
file. For example: file. For example:
worker_main_http_uri: http://127.0.0.1:8008 ```yaml
worker_main_http_uri: http://127.0.0.1:8008
```
### Historical apps ### Historical apps