From 39fd18bfc956049f2456544308d0143635c43828 Mon Sep 17 00:00:00 2001 From: creme Date: Tue, 13 Sep 2022 14:01:03 +0200 Subject: [PATCH] update config's --- etc/matrix-synapse/homeserver.yaml | 40 ++--- .../workers/generic_worker1.yaml | 2 + .../workers/generic_worker2.yaml | 2 + .../workers/generic_worker3.yaml | 2 + .../workers/generic_worker4.yaml | 2 + etc/nginx/include.d/generic_worker.conf | 6 + etc/postgresql/13/main/postgresql.conf | 159 ++++++++++++++---- 7 files changed, 149 insertions(+), 64 deletions(-) diff --git a/etc/matrix-synapse/homeserver.yaml b/etc/matrix-synapse/homeserver.yaml index 5be0f76..55623dc 100644 --- a/etc/matrix-synapse/homeserver.yaml +++ b/etc/matrix-synapse/homeserver.yaml @@ -59,7 +59,7 @@ modules: # these rooms. ban_lists: # EBL - - "!UyrSHIwWgbGsHjabGe:envs.net" + - "!GGuqmQVLNyWASNjVQw:envs.net" # matrix-coc-bl - "!WuBtumawCeOGEieRrp:matrix.org" # matrix-tos-bl @@ -68,6 +68,8 @@ modules: - "!RRGtWzzVKUJmDVRNnZ:aria-net.org" # asragr-ban-list - "!YImXsibeOfGBYVaElT:asra.gr" + # community-moderation-effort-bl:neko.dev + - "!fTjMjIzNKEsFlUIiru:neko.dev" #message_max_length: # Limit the characters in a message (event body) that a client can send in an event on this server. # By default there is no limit (beyond the the limit the spec enforces on event size). @@ -627,7 +629,7 @@ retention: # The message retention policies feature is disabled by default. Uncomment the # following line to enable it. # - enabled: true + enabled: false # Default retention policy. If set, Synapse will apply it to rooms that lack the # 'm.room.retention' state event. Currently, the value of 'min_lifetime' doesn't @@ -814,7 +816,7 @@ retention: # The number of events to cache in memory. Not affected by # caches.global_factor. # -#event_cache_size: 10K +#event_cache_size: 15K caches: # Controls the global cache factor, which is the default cache factor @@ -1453,31 +1455,6 @@ allow_guest_access: false # #default_identity_server: https://matrix.org -# Handle threepid (email/phone etc) registration and password resets through a set of -# *trusted* identity servers. Note that this allows the configured identity server to -# reset passwords for accounts! -# -# Be aware that if `email` is not set, and SMTP options have not been -# configured in the email config block, registration and user password resets via -# email will be globally disabled. -# -# Additionally, if `msisdn` is not set, registration and password resets via msisdn -# will be disabled regardless, and users will not be able to associate an msisdn -# identifier to their account. This is due to Synapse currently not supporting -# any method of sending SMS messages on its own. -# -# To enable using an identity server for operations regarding a particular third-party -# identifier type, set the value to the URL of that identity server as shown in the -# examples below. -# -# Servers handling the these requests must answer the `/requestToken` endpoints defined -# by the Matrix Identity Service API specification: -# https://matrix.org/docs/spec/identity_service/latest -# -account_threepid_delegates: - #email: https://example.com # Delegate email sending to example.com - #msisdn: http://localhost:8090 # Delegate SMS sending to this local process - # Whether users are allowed to change their displayname after it has # been initially set. Useful when provisioning users based on the # contents of a third-party directory. @@ -2374,6 +2351,8 @@ email: # smtp_user: "exampleusername" # smtp_pass: "examplepassword" + #force_tls: true + # Uncomment the following to require TLS transport security for SMTP. # By default, Synapse will connect over plain text, and will then switch to # TLS via STARTTLS *if the SMTP server supports it*. If this option is set, @@ -2575,7 +2554,7 @@ push: # #default_power_level_content_override: # private_chat: -# "events": +# "events": # "com.example.myeventtype" : 0 # "m.room.avatar": 50 # "m.room.canonical_alias": 50 @@ -2610,7 +2589,7 @@ user_directory: # These indexes are built the first time Synapse starts; admins can # manually trigger a rebuild via API following the instructions at # https://matrix-org.github.io/synapse/latest/usage/administration/admin_api/background_updates.html#run - # + # # Uncomment to return search results containing all known users, even if that # user does not share a room with the requester. # @@ -2965,4 +2944,5 @@ background_updates: experimental_features: + msc2815_enabled: true msc2285_enabled: true diff --git a/etc/matrix-synapse/workers/generic_worker1.yaml b/etc/matrix-synapse/workers/generic_worker1.yaml index 8ae8266..2bd1dd3 100644 --- a/etc/matrix-synapse/workers/generic_worker1.yaml +++ b/etc/matrix-synapse/workers/generic_worker1.yaml @@ -5,6 +5,8 @@ worker_name: generic_worker1 worker_replication_host: 127.0.0.1 worker_replication_http_port: 9093 +worker_main_http_uri: http://localhost:8008/ + worker_log_config: /etc/matrix-synapse/workers/generic_worker1_log_config.yaml worker_listeners: diff --git a/etc/matrix-synapse/workers/generic_worker2.yaml b/etc/matrix-synapse/workers/generic_worker2.yaml index ae56696..4442296 100644 --- a/etc/matrix-synapse/workers/generic_worker2.yaml +++ b/etc/matrix-synapse/workers/generic_worker2.yaml @@ -5,6 +5,8 @@ worker_name: generic_worker2 worker_replication_host: 127.0.0.1 worker_replication_http_port: 9093 +worker_main_http_uri: http://localhost:8008/ + worker_log_config: /etc/matrix-synapse/workers/generic_worker2_log_config.yaml worker_listeners: diff --git a/etc/matrix-synapse/workers/generic_worker3.yaml b/etc/matrix-synapse/workers/generic_worker3.yaml index 8da8ed2..772d6f3 100644 --- a/etc/matrix-synapse/workers/generic_worker3.yaml +++ b/etc/matrix-synapse/workers/generic_worker3.yaml @@ -5,6 +5,8 @@ worker_name: generic_worker3 worker_replication_host: 127.0.0.1 worker_replication_http_port: 9093 +worker_main_http_uri: http://localhost:8008/ + worker_log_config: /etc/matrix-synapse/workers/generic_worker3_log_config.yaml worker_listeners: diff --git a/etc/matrix-synapse/workers/generic_worker4.yaml b/etc/matrix-synapse/workers/generic_worker4.yaml index 905d87f..623fcb2 100644 --- a/etc/matrix-synapse/workers/generic_worker4.yaml +++ b/etc/matrix-synapse/workers/generic_worker4.yaml @@ -5,6 +5,8 @@ worker_name: generic_worker4 worker_replication_host: 127.0.0.1 worker_replication_http_port: 9093 +worker_main_http_uri: http://localhost:8008/ + worker_log_config: /etc/matrix-synapse/workers/generic_worker4_log_config.yaml worker_listeners: diff --git a/etc/nginx/include.d/generic_worker.conf b/etc/nginx/include.d/generic_worker.conf index cf752f1..19ea843 100644 --- a/etc/nginx/include.d/generic_worker.conf +++ b/etc/nginx/include.d/generic_worker.conf @@ -230,6 +230,12 @@ location ~ ^/_matrix/client/(r0|v3|unstable)/room_keys/ { proxy_pass http://generic_worker_lc; } +# Note that ^/_matrix/client/(r0|v3|unstable)/keys/upload/ requires `worker_main_http_uri` +location ~ ^/_matrix/client/(r0|v3|unstable)/keys/upload/ { + include include.d/synapse-proxy.conf; + proxy_pass http://generic_worker_lc; +} + ## Registration/login requests location ~ ^/_matrix/client/(api/v1|r0|v3|unstable)/login$ { diff --git a/etc/postgresql/13/main/postgresql.conf b/etc/postgresql/13/main/postgresql.conf index 02de9ef..7fcb37b 100644 --- a/etc/postgresql/13/main/postgresql.conf +++ b/etc/postgresql/13/main/postgresql.conf @@ -38,15 +38,15 @@ # The default values of these variables are driven from the -D command-line # option or PGDATA environment variable, represented here as ConfigDir. -data_directory = '/var/lib/postgresql/11/main' # use data in another directory +data_directory = '/var/lib/postgresql/13/main' # use data in another directory # (change requires restart) -hba_file = '/etc/postgresql/11/main/pg_hba.conf' # host-based authentication file +hba_file = '/etc/postgresql/13/main/pg_hba.conf' # host-based authentication file # (change requires restart) -ident_file = '/etc/postgresql/11/main/pg_ident.conf' # ident configuration file +ident_file = '/etc/postgresql/13/main/pg_ident.conf' # ident configuration file # (change requires restart) # If external_pid_file is not explicitly set, no extra PID file is written. -external_pid_file = '/var/run/postgresql/11-main.pid' # write an extra PID file +external_pid_file = '/var/run/postgresql/13-main.pid' # write an extra PID file # (change requires restart) @@ -56,7 +56,7 @@ external_pid_file = '/var/run/postgresql/11-main.pid' # write an extra PID fil # - Connection Settings - -listen_addresses = '127.0.0.1' # what IP address(es) to listen on; +#listen_addresses = 'localhost' # what IP address(es) to listen on; # comma-separated list of addresses; # defaults to 'localhost'; use '*' for all # (change requires restart) @@ -73,8 +73,8 @@ unix_socket_directories = '/var/run/postgresql' # comma-separated list of direct #bonjour_name = '' # defaults to the computer name # (change requires restart) -# - TCP Keepalives - -# see "man 7 tcp" for details +# - TCP settings - +# see "man tcp" for details #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; # 0 selects the system default @@ -82,15 +82,17 @@ unix_socket_directories = '/var/run/postgresql' # comma-separated list of direct # 0 selects the system default #tcp_keepalives_count = 0 # TCP_KEEPCNT; # 0 selects the system default +#tcp_user_timeout = 0 # TCP_USER_TIMEOUT, in milliseconds; + # 0 selects the system default # - Authentication - #authentication_timeout = 1min # 1s-600s -password_encryption = 'scram-sha-256' # md5 or scram-sha-256 +password_encryption = scram-sha-256 # md5 or scram-sha-256 #db_user_namespace = off # GSSAPI using Kerberos -#krb_server_keyfile = '' +#krb_server_keyfile = 'FILE:${sysconfdir}/krb5.keytab' #krb_caseins_users = off # - SSL - @@ -103,6 +105,8 @@ ssl_key_file = '/etc/ssl/private/ssl-cert-snakeoil.key' #ssl_ciphers = 'HIGH:MEDIUM:+3DES:!aNULL' # allowed SSL ciphers #ssl_prefer_server_ciphers = on #ssl_ecdh_curve = 'prime256v1' +#ssl_min_protocol_version = 'TLSv1.2' +#ssl_max_protocol_version = '' #ssl_dh_params_file = '' #ssl_passphrase_command = '' #ssl_passphrase_command_supports_reload = off @@ -123,32 +127,39 @@ shared_buffers = 8GB # min 128kB # (change requires restart) # Caution: it is not advisable to set max_prepared_transactions nonzero unless # you actively intend to use prepared transactions. -work_mem = 20971kB # min 64kB +work_mem = 13981kB # min 64kB +#hash_mem_multiplier = 1.0 # 1-1000.0 multiplier on hash table work_mem maintenance_work_mem = 2GB # min 1MB #autovacuum_work_mem = -1 # min 1MB, or -1 to use maintenance_work_mem +#logical_decoding_work_mem = 64MB # min 64kB #max_stack_depth = 2MB # min 100kB +#shared_memory_type = mmap # the default is the first option + # supported by the operating system: + # mmap + # sysv + # windows + # (change requires restart) dynamic_shared_memory_type = posix # the default is the first option # supported by the operating system: # posix # sysv # windows # mmap - # use none to disable dynamic shared memory # (change requires restart) # - Disk - #temp_file_limit = -1 # limits per-process temp file space - # in kB, or -1 for no limit + # in kilobytes, or -1 for no limit # - Kernel Resources - -#max_files_per_process = 1000 # min 25 +#max_files_per_process = 1000 # min 64 # (change requires restart) # - Cost-Based Vacuum Delay - -#vacuum_cost_delay = 0 # 0-100 milliseconds +#vacuum_cost_delay = 0 # 0-100 milliseconds (0 disables) #vacuum_cost_page_hit = 1 # 0-10000 credits #vacuum_cost_page_miss = 10 # 0-10000 credits #vacuum_cost_page_dirty = 20 # 0-10000 credits @@ -164,11 +175,12 @@ dynamic_shared_memory_type = posix # the default is the first option # - Asynchronous Behavior - effective_io_concurrency = 200 # 1-1000; 0 disables prefetching -#max_worker_processes = 4 # (change requires restart) -#max_parallel_maintenance_workers = 2 # taken from max_parallel_workers -#max_parallel_workers_per_gather = 2 # taken from max_parallel_workers +#maintenance_io_concurrency = 10 # 1-1000; 0 disables prefetching +#max_worker_processes = 6 # (change requires restart) +#max_parallel_maintenance_workers = 3 # taken from max_parallel_workers +#max_parallel_workers_per_gather = 3 # taken from max_parallel_workers #parallel_leader_participation = on -#max_parallel_workers = 4 # maximum number of max_worker_processes that +#max_parallel_workers = 6 # maximum number of max_worker_processes that # can be used in parallel operations #old_snapshot_threshold = -1 # 1min-60d; -1 disables; 0 is immediate # (change requires restart) @@ -191,7 +203,7 @@ synchronous_commit = off # synchronization level; #wal_sync_method = fsync # the default is the first option # supported by the operating system: # open_datasync - # fdatasync (default on Linux) + # fdatasync (default on Linux and FreeBSD) # fsync # fsync_writethrough # open_sync @@ -199,10 +211,13 @@ synchronous_commit = off # synchronization level; #wal_compression = off # enable compression of full-page writes #wal_log_hints = off # also do full page writes of non-critical updates # (change requires restart) +#wal_init_zero = on # zero-fill new WAL files +#wal_recycle = on # recycle WAL files wal_buffers = 16MB # min 32kB, -1 sets based on shared_buffers # (change requires restart) #wal_writer_delay = 200ms # 1-10000 milliseconds #wal_writer_flush_after = 1MB # measured in pages, 0 disables +#wal_skip_threshold = 2MB #commit_delay = 0 # range 0-100000, in microseconds #commit_siblings = 5 # range 1-1000 @@ -210,9 +225,9 @@ wal_buffers = 16MB # min 32kB, -1 sets based on shared_buffers # - Checkpoints - #checkpoint_timeout = 5min # range 30s-1d -max_wal_size = 4GB -min_wal_size = 1GB -checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 +max_wal_size = 8GB +min_wal_size = 2GB +checkpoint_completion_target = 0.9 # checkpoint target duration, 0.0 - 1.0 #checkpoint_flush_after = 256kB # measured in pages, 0 disables #checkpoint_warning = 30s # 0 disables @@ -227,6 +242,42 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 #archive_timeout = 0 # force a logfile segment switch after this # number of seconds; 0 disables +# - Archive Recovery - + +# These are only used in recovery mode. + +#restore_command = '' # command to use to restore an archived logfile segment + # placeholders: %p = path of file to restore + # %f = file name only + # e.g. 'cp /mnt/server/archivedir/%f %p' + # (change requires restart) +#archive_cleanup_command = '' # command to execute at every restartpoint +#recovery_end_command = '' # command to execute at completion of recovery + +# - Recovery Target - + +# Set these only when performing a targeted recovery. + +#recovery_target = '' # 'immediate' to end recovery as soon as a + # consistent state is reached + # (change requires restart) +#recovery_target_name = '' # the named restore point to which recovery will proceed + # (change requires restart) +#recovery_target_time = '' # the time stamp up to which recovery will proceed + # (change requires restart) +#recovery_target_xid = '' # the transaction ID up to which recovery will proceed + # (change requires restart) +#recovery_target_lsn = '' # the WAL LSN up to which recovery will proceed + # (change requires restart) +#recovery_target_inclusive = on # Specifies whether to stop: + # just after the specified recovery target (on) + # just before the recovery target (off) + # (change requires restart) +#recovery_target_timeline = 'latest' # 'current', 'latest', or timeline ID + # (change requires restart) +#recovery_target_action = 'pause' # 'pause', 'promote', 'shutdown' + # (change requires restart) + #------------------------------------------------------------------------------ # REPLICATION @@ -238,7 +289,8 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 #max_wal_senders = 10 # max number of walsender processes # (change requires restart) -#wal_keep_segments = 0 # in logfile segments; 0 disables +#wal_keep_size = 0 # in megabytes; 0 disables +#max_slot_wal_keep_size = -1 # in megabytes; -1 disables #wal_sender_timeout = 60s # in milliseconds; 0 disables #max_replication_slots = 10 # max number of replication slots @@ -260,6 +312,9 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 # These settings are ignored on a master server. +#primary_conninfo = '' # connection string to sending server +#primary_slot_name = '' # replication slot on sending server +#promote_trigger_file = '' # file name whose presence ends recovery #hot_standby = on # "off" disallows queries during recovery # (change requires restart) #max_standby_archive_delay = 30s # max delay before canceling queries @@ -268,6 +323,8 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 #max_standby_streaming_delay = 30s # max delay before canceling queries # when reading streaming WAL; # -1 allows indefinite delay +#wal_receiver_create_temp_slot = off # create temp slot if primary_slot_name + # is not set #wal_receiver_status_interval = 10s # send replies at least this often # 0 disables #hot_standby_feedback = off # send info from standby to prevent @@ -277,6 +334,7 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 # in milliseconds; 0 disables #wal_retrieve_retry_interval = 5s # time to wait before retrying to # retrieve WAL after a failed attempt +#recovery_min_apply_delay = 0 # minimum delay for applying changes during recovery # - Subscribers - @@ -304,6 +362,7 @@ checkpoint_completion_target = 0.8 # checkpoint target duration, 0.0 - 1.0 #enable_parallel_append = on #enable_seqscan = on #enable_sort = on +#enable_incremental_sort = on #enable_tidscan = on #enable_partitionwise_join = off #enable_partitionwise_aggregate = off @@ -331,7 +390,7 @@ random_page_cost = 1.1 # same scale as above #min_parallel_table_scan_size = 8MB #min_parallel_index_scan_size = 512kB -effective_cache_size = 14GB +effective_cache_size = 24GB # - Genetic Query Optimizer - @@ -345,14 +404,16 @@ effective_cache_size = 14GB # - Other Planner Options - -default_statistics_target = 100 # range 1-10000 +default_statistics_target = 100 # range 1-10000 #constraint_exclusion = partition # on, off, or partition #cursor_tuple_fraction = 0.1 # range 0.0-1.0 #from_collapse_limit = 8 #join_collapse_limit = 8 # 1 disables collapsing of explicit # JOIN clauses #force_parallel_mode = off -#jit = off # allow JIT compilation +#jit = on # allow JIT compilation +#plan_cache_mode = auto # auto, force_generic_plan or + # force_custom_plan #------------------------------------------------------------------------------ @@ -438,6 +499,20 @@ default_statistics_target = 100 # range 1-10000 # statements running at least this number # of milliseconds +#log_min_duration_sample = -1 # -1 is disabled, 0 logs a sample of statements + # and their durations, > 0 logs only a sample of + # statements running at least this number + # of milliseconds; + # sample fraction is determined by log_statement_sample_rate + +#log_statement_sample_rate = 1.0 # fraction of logged statements exceeding + # log_min_duration_sample to be logged; + # 1.0 logs all such statements, 0.0 never logs + + +#log_transaction_sample_rate = 0.0 # fraction of transactions whose statements + # are logged regardless of their duration; 1.0 logs all + # statements from all transactions, 0.0 never logs # - What to Log - @@ -457,6 +532,7 @@ log_line_prefix = '%m [%p] %q%u@%d ' # special values: # %d = database name # %r = remote host and port # %h = remote host + # %b = backend type # %p = process ID # %t = timestamp without milliseconds # %m = timestamp with milliseconds @@ -473,6 +549,12 @@ log_line_prefix = '%m [%p] %q%u@%d ' # special values: # %% = '%' # e.g. '<%u%%%d> ' #log_lock_waits = off # log lock waits >= deadlock_timeout +#log_parameter_max_length = -1 # when logging statements, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables +#log_parameter_max_length_on_error = 0 # when logging an error, limit logged + # bind-parameter values to N bytes; + # -1 means print in full, 0 disables #log_statement = 'none' # none, ddl, mod, all #log_replication_commands = off #log_temp_files = -1 # log temporary files equal or larger @@ -484,7 +566,7 @@ log_timezone = 'Etc/UTC' # PROCESS TITLE #------------------------------------------------------------------------------ -cluster_name = '11/main' # added to process titles if nonempty +cluster_name = '13/main' # added to process titles if nonempty # (change requires restart) #update_process_title = on @@ -500,7 +582,7 @@ cluster_name = '11/main' # added to process titles if nonempty #track_io_timing = off #track_functions = none # none, pl, all #track_activity_query_size = 1024 # (change requires restart) -stats_temp_directory = '/var/run/postgresql/11-main.pg_stat_tmp' +stats_temp_directory = '/var/run/postgresql/13-main.pg_stat_tmp' # - Monitoring - @@ -526,16 +608,21 @@ stats_temp_directory = '/var/run/postgresql/11-main.pg_stat_tmp' #autovacuum_naptime = 1min # time between autovacuum runs #autovacuum_vacuum_threshold = 50 # min number of row updates before # vacuum +#autovacuum_vacuum_insert_threshold = 1000 # min number of row inserts + # before vacuum; -1 disables insert + # vacuums #autovacuum_analyze_threshold = 50 # min number of row updates before # analyze #autovacuum_vacuum_scale_factor = 0.2 # fraction of table size before vacuum +#autovacuum_vacuum_insert_scale_factor = 0.2 # fraction of inserts over table + # size before insert vacuum #autovacuum_analyze_scale_factor = 0.1 # fraction of table size before analyze #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum # (change requires restart) #autovacuum_multixact_freeze_max_age = 400000000 # maximum multixact age # before forced vacuum # (change requires restart) -#autovacuum_vacuum_cost_delay = 20ms # default vacuum cost delay for +#autovacuum_vacuum_cost_delay = 2ms # default vacuum cost delay for # autovacuum, in milliseconds; # -1 means use vacuum_cost_delay #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for @@ -564,6 +651,7 @@ stats_temp_directory = '/var/run/postgresql/11-main.pg_stat_tmp' #default_tablespace = '' # a tablespace name, '' uses the default #temp_tablespaces = '' # a list of tablespace names, '' uses # only default tablespace +#default_table_access_method = 'heap' #check_function_bodies = on #default_transaction_isolation = 'read committed' #default_transaction_read_only = off @@ -597,7 +685,8 @@ timezone = 'Etc/UTC' # India # You can create your own file in # share/timezonesets/. -#extra_float_digits = 0 # min -15, max 3 +#extra_float_digits = 1 # min -15, max 3; any value >0 actually + # selects precise output mode #client_encoding = sql_ascii # actually, defaults to database # encoding @@ -621,6 +710,8 @@ default_text_search_config = 'pg_catalog.english' # - Other Defaults - #dynamic_library_path = '$libdir' +#extension_destdir = '' # prepend path when loading extensions + # and shared objects (added by Debian) #------------------------------------------------------------------------------ @@ -646,7 +737,6 @@ default_text_search_config = 'pg_catalog.english' #array_nulls = on #backslash_quote = safe_encoding # on, off, or safe_encoding -#default_with_oids = off #escape_string_warning = on #lo_compat_privileges = off #operator_precedence_warning = off @@ -675,12 +765,13 @@ default_text_search_config = 'pg_catalog.english' #------------------------------------------------------------------------------ # These options allow settings to be loaded from files other than the -# default postgresql.conf. +# default postgresql.conf. Note that these are directives, not variable +# assignments, so they can usefully be given more than once. include_dir = 'conf.d' # include files ending in '.conf' from # a directory, e.g., 'conf.d' -#include_if_exists = '' # include file only if it exists -#include = '' # include file +#include_if_exists = '...' # include file only if it exists +#include = '...' # include file #------------------------------------------------------------------------------