The `http_proxy` and `HTTPS_PROXY` env vars can be set to a `host[:port]` value which should point to a proxy.
The address of the proxy should be excluded from IP blacklists such as the `url_preview_ip_range_blacklist`.
The proxy will then be used for
* push
* url previews
* phone-home stats
* recaptcha validation
* CAS auth validation
It will *not* be used for:
* Application Services
* Identity servers
* Outbound federation
* In worker configurations, connections from workers to masters
Fixes#4198.
This fixed the weirdness of 400 vs 404 as http status code in the case
the filter id is not known by the server.
As e.g. matrix-js-sdk expects 404 to catch this situation this leads
to unwanted behaviour.
Pillow will use nearest neighbour as the resampling algorithm if the
source image is either 1-bit or a color palette using 8 bits. If we
convert to RGB before scaling, we'll probably get a better result.
Doing a password reset via SMS has never worked, and in any case is a silly
idea because msisdn recycling is a thing.
See also matrix-org/matrix-doc#2303.
because, frankly, it looked like it was written by an axe-murderer.
This should be a non-functional change, except that where `m.login.dummy` was
previously advertised *before* `m.login.terms`, it will now be advertised
afterwards. AFAICT that should have no effect, and will be more consistent with
the flows that involve passing a 3pid.
As MSC2263 states, m.require_identity_server must be set to false when it does not require an identity server to be provided by the client for the purposes of email registration or password reset.
Adds an m.require_identity_server flag to /versionss unstable_flags section. This will advertise that Synapse no longer needs id_server as a parameter.
Implements MSC2290. This PR adds two new endpoints, /unstable/account/3pid/add and /unstable/account/3pid/bind. Depending on the progress of that MSC the unstable prefix may go away.
This PR also removes the blacklist on some 3PID tests which occurs in #6042, as the corresponding Sytest PR changes them to use the new endpoints.
Finally, it also modifies the account deactivation code such that it doesn't just try to deactivate 3PIDs that were bound to the user's account, but any 3PIDs that were bound through the homeserver on that user's account.
Fixes#6066
This register endpoint should be disabled if registration is disabled, otherwise we're giving anyone the ability to check if a username exists on a server when we don't need to be.
Error code is 403 (Forbidden) as that's the same returned by /register when registration is disabled.
Remove trailing slash ability from the password reset submit_token endpoint. Since we provide the link in an email, and have never sent it with a trailing slash, there's no point for us to accept them on the endpoint.
Removes the POST method from `/password_reset/<medium>/submit_token/` as it's only used by phone number verification which Synapse does not support yet.
We want to assign unique mxids to saml users based on an incrementing
suffix. For that to work, we need to record the allocated mxid in a separate
table.
This is a combination of a few different PRs, finally all being merged into `develop`:
* #5875
* #5876
* #5868 (This one added the `/versions` flag but the flag itself was actually [backed out](891afb57cb (diff-e591d42d30690ffb79f63bb726200891)) in #5969. What's left is just giving /versions access to the config file, which could be useful in the future)
* #5835
* #5969
* #5940
Clients should not actually use the new registration functionality until https://github.com/matrix-org/synapse/pull/5972 is merged.
UPGRADE.rst, changelog entries and config file changes should all be reviewed closely before this PR is merged.
* Ensure the list media admin API is always available
This API is required for some external media repo implementations to operate (mostly for doing quarantine operations on a room).
* changelog
Remove all the "double return" statements which were a result of us removing all the instances of
```
defer.returnValue(...)
return
```
statements when we switched to python3 fully.
Python will return a tuple whether there are parentheses around the returned values or not.
I'm just sick of my editor complaining about this all over the place :)
This type of registration was probably never used. It only includes the
user name in the HMAC but not the password.
Shared secret registration is still available via
client/r0/admin/register.
Signed-off-by: Manuel Stahl <manuel.stahl@awesome-technologies.de>
Fixes#5833
The emailconfig code was attempting to pull incorrect config file names. This corrects that, while also marking a difference between a config file variable that's a filepath versus a str containing HTML.
--------
- Fix a regression introduced in v1.2.0rc1 which led to incorrect labels on some prometheus metrics. ([\#5734](https://github.com/matrix-org/synapse/issues/5734))
-----BEGIN PGP SIGNATURE-----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=+JBn
-----END PGP SIGNATURE-----
Merge tag 'v1.2.0rc2' into develop
Bugfixes
--------
- Fix a regression introduced in v1.2.0rc1 which led to incorrect labels on some prometheus metrics. ([\#5734](https://github.com/matrix-org/synapse/issues/5734))
* Fix servlet metric names
Co-Authored-By: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Remove redundant check
* Cover all return paths
First of all, let's get rid of `TOKEN_NOT_FOUND_HTTP_STATUS`. It was a hack we
did at one point when it was possible to return either a 403 or a 401 if the
creds were missing. We always return a 401 in these cases now (thankfully), so
it's not needed.
Let's also stop abusing `AuthError` for these cases. Honestly they have nothing
that relates them to the other places that `AuthError` is used, other than the
fact that they are loosely under the 'Auth' banner. It makes no sense for them
to share exception classes.
Instead, let's add a couple of new exception classes: `InvalidClientTokenError`
and `MissingClientTokenError`, for the `M_UNKNOWN_TOKEN` and `M_MISSING_TOKEN`
cases respectively - and an `InvalidClientCredentialsError` base class for the
two of them.
A fix for PR #5626, which returned the original event content as part of a call to /relations.
Only problem was that we were attempting to aggregate the relations on top of it when we did so. We now set bundle_aggregations to False in the get_event call.
We also do this when pulling the relation events as well, because edits of edits are not something we'd like to support here.
When asking for the relations of an event, include the original event in the response. This will mostly be used for efficiently showing edit history, but could be useful in other circumstances.
Nothing uses this now, so we can remove the dead code, and clean up the
API.
Since we're changing the shape of the return value anyway, we take the
opportunity to give the method a better name.
* SAML2 Improvements and redirect stuff
Signed-off-by: Alexander Trost <galexrt@googlemail.com>
* Code cleanups and simplifications.
Also: share the saml client between redirect and response handlers.
* changelog
* Revert redundant changes to static js
* Move all the saml stuff out to a centralised handler
* Add support for tracking SAML2 sessions.
This allows us to correctly handle `allow_unsolicited: False`.
* update sample config
* cleanups
* update sample config
* rename BaseSSORedirectServlet for consistency
* Address review comments
Moves the warning about password resets being disabled to the point where a user actually tries to reset their password. Is this an appropriate place for it to happen?
Also removed the disabling of msisdn password resets when you don't have an email config, as that just doesn't make sense.
Also change the error a user receives upon disabled passwords to specify that only email-based password reset is disabled.
Sends password reset emails from the homeserver instead of proxying to the identity server. This is now the default behaviour for security reasons. If you wish to continue proxying password reset requests to the identity server you must now enable the email.trust_identity_server_for_password_resets option.
This PR is a culmination of 3 smaller PRs which have each been separately reviewed:
* #5308
* #5345
* #5368
This fixes a bug which were causing the "event_format" field to be
ignored in the filter of requests to the `/messages` endpoint of the
CS API.
Signed-off-by: Eisha Chen-yen-su <chenyensu0@gmail.com>
Replaces DEFAULT_ROOM_VERSION constant with a method that first checks the config, then returns a hardcoded value if the option is not present.
That hardcoded value is now located in the server.py config file.
We checked that 3pids were not already in use before we checked if
we were going to return the account previously registered in the
same UI auth session, in which case the 3pids will definitely
be in use.
https://github.com/vector-im/riot-web/issues/9586
Prevents a SynapseError being raised inside of a IResolutionReceiver and instead opts to just return 0 results. This thus means that we have to lump a failed lookup and a blacklisted lookup together with the same error message, but the substitute should be generic enough to cover both cases.
It's more natural for the user if the bit that takes them away
from the registration flow comes last. Adding the dummy stage allows
us to do the stages in this order without the ambiguity.
This allows the client to complete the email last which is more
natual for the user. Without this stage, if the client would
complete the recaptcha (and terms, if enabled) stages and then the
registration request would complete because you've now completed a
flow, even if you were intending to complete the flow that's the
same except has email auth at the end.
Adding a dummy auth stage to the recaptcha-only flow means it's
always unambiguous which flow the client was trying to complete.
Longer term we should think about changing the protocol so the
client explicitly says which flow it's trying to complete.
vector-im/riot-web#9586
This allows the client to complete the email last which is more
natual for the user. Without this stage, if the client would
complete the recaptcha (and terms, if enabled) stages and then the
registration request would complete because you've now completed a
flow, even if you were intending to complete the flow that's the
same except has email auth at the end.
Adding a dummy auth stage to the recaptcha-only flow means it's
always unambiguous which flow the client was trying to complete.
Longer term we should think about changing the protocol so the
client explicitly says which flow it's trying to complete.
https://github.com/vector-im/riot-web/issues/9586
This commit adds two config options:
* `restrict_public_rooms_to_local_users`
Requires auth to fetch the public rooms directory through the CS API and disables fetching it through the federation API.
* `require_auth_for_profile_requests`
When set to `true`, requires that requests to `/profile` over the CS API are authenticated, and only returns the user's profile if the requester shares a room with the profile's owner, as per MSC1301.
MSC1301 also specifies a behaviour for federation (only returning the profile if the server asking for it shares a room with the profile's owner), but that's currently really non-trivial to do in a not too expensive way. Next step is writing down a MSC that allows a HS to specify which user sent the profile query. In this implementation, Synapse won't send a profile query over federation if it doesn't believe it already shares a room with the profile's owner, though.
Groups have been intentionally omitted from this commit.
This endpoint isn't much use for its intended purpose if you first need to get
yourself an admin's auth token.
I've restricted it to the `/_synapse/admin` path to make it a bit easier to
lock down for those concerned about exposing this information. I don't imagine
anyone is using it in anger currently.
By default the homeserver will use the identity server used during the
binding of the 3PID to unbind the 3PID. However, we need to allow
clients to explicitly ask the homeserver to unbind via a particular
identity server, for the case where the 3PID was bound out of band from
the homeserver.
Implements MSC915.
Adds a new method, check_3pid_auth, which gives password providers
the chance to allow authentication with third-party identifiers such
as email or msisdn.
Currently the explanation message is sent to the abuse room before any
users are forced joined, which means it tends to get lost in the backlog
of joins.
So instead we send the message *after* we've forced joined everyone.
* Rate-limiting for registration
* Add unit test for registration rate limiting
* Add config parameters for rate limiting on auth endpoints
* Doc
* Fix doc of rate limiting function
Co-Authored-By: babolivier <contact@brendanabolivier.com>
* Incorporate review
* Fix config parsing
* Fix linting errors
* Set default config for auth rate limiting
* Fix tests
* Add changelog
* Advance reactor instead of mocked clock
* Move parameters to registration specific config and give them more sensible default values
* Remove unused config options
* Don't mock the rate limiter un MAU tests
* Rename _register_with_store into register_with_store
* Make CI happy
* Remove unused import
* Update sample config
* Fix ratelimiting test for py2
* Add non-guest test
This allows registration to be handled by a worker, though the actual
write to the database still happens on master.
Note: due to the in-memory session map all registration requests must be
handled by the same worker.
* Correctly retry and back off if we get a HTTPerror response
* Refactor request sending to have better excpetions
MatrixFederationHttpClient blindly reraised exceptions to the caller
without differentiating "expected" failures (e.g. connection timeouts
etc) versus more severe problems (e.g. programming errors).
This commit adds a RequestSendFailed exception that is raised when
"expected" failures happen, allowing the TransactionQueue to log them as
warnings while allowing us to log other exceptions as actual exceptions.
Allow for the creation of a support user.
A support user can access the server, join rooms, interact with other users, but does not appear in the user directory nor does it contribute to monthly active user limits.
This implements both a SAML2 metadata endpoint (at
`/_matrix/saml2/metadata.xml`), and a SAML2 response receiver (at
`/_matrix/saml2/authn_response`). If the SAML2 response matches what's been
configured, we complete the SSO login flow by redirecting to the client url
(aka `RelayState` in SAML2 jargon) with a login token.
What we don't yet have is anything to build a SAML2 request and redirect the
user to the identity provider. That is left as an exercise for the reader.
This is mostly factoring out the post-CAS-login code to somewhere we can reuse
it for other SSO flows, but it also fixes the userid mapping while we're at it.
* Rip out half-implemented m.login.saml2 support
This was implemented in an odd way that left most of the work to the client, in
a way that I really didn't understand. It's going to be a pain to maintain, so
let's start by ripping it out.
* drop undocumented dependency on dateutil
It turns out we were relying on dateutil being pulled in transitively by
pysaml2. There's no need for that bloat.
* Clean up the CSS for the fallback login form
I was finding this hard to work with, so simplify a bunch of things. Each
flow is now a form inside a div of class login_flow.
The login_flow class now has a fixed width, as that looks much better than each
flow having a differnt width.
* Support m.login.sso
MSC1721 renames m.login.cas to m.login.sso. This implements the change
(retaining support for m.login.cas for older clients).
* changelog
Currently when fetching state groups from the data store we make two
hits two the database: once for members and once for non-members (unless
request is filtered to one or the other). This adds needless load to the
datbase, so this PR refactors the lookup to make only a single database
hit.
Broadly three things here:
* disable W504 which seems a bit whacko
* remove a bunch of `as e` expressions from exception handlers that don't use
them
* use `r""` for strings which include backslashes
Also, we don't use pep8 any more, so we can get rid of the duplicate config
there.
Wrap calls to deferToThread() in a thing which uses a child logcontext to
attribute CPU usage to the right request.
While we're in the area, remove the logcontext_tracer stuff, which is never
used, and afaik doesn't work.
Fixes#4064
Synapse doesn’t allow for media resources to be played directly from
Chrome. It is a problem for users on other networks (e.g. IRC)
communicating with Matrix users through a gateway. The gateway sends
them the raw URL for the resource when a Matrix user uploads a video
and the video cannot be played directly in Chrome using that URL.
Chrome argues it is not authorized to play the video because of the
Content Security Policy. Chrome checks for the "media-src" policy which
is missing, and defauts to the "default-src" policy which is "none".
As Synapse already sends "object-src: 'self'" I thought it wouldn’t be
a problem to add "media-src: 'self'" to the CSP to fix this problem.
ExpiringCache required that `start()` be called before it would actually
start expiring entries. A number of places didn't do that.
This PR removes `start` from ExpiringCache, and automatically starts
backround reaping process on creation instead.
Continues from uhoreg's branch
This just fixed the errcode on /room_keys/version if no backup and
updates the schema delta to be on the latest so it gets run
Older identity servers may not support the unbind 3pid request, so we
shouldn't fail the requests if we received one of 400/404/501. The
request still fails if we receive e.g. 500 responses, allowing clients
to retry requests on transient identity server errors that otherwise do
support the API.
Fixes#3661
Make sure that the user has permission to view the requeseted event for
/event/{eventId} and /room/{roomId}/event/{eventId} requests.
Also check that the event is in the given room for
/room/{roomId}/event/{eventId}, for sanity.
This commit replaces SynapseError.from_http_response_exception with
HttpResponseException.to_synapse_error.
The new method actually returns a ProxiedRequestError, which allows us to pass
through additional metadata from the API call.
It turns out that looping_call does check the deferred returned by its
callback, and (at least in the case of client_ips), we were relying on this,
and I broke it in #3604.
Update run_as_background_process to return the deferred, and make sure we
return it to clock.looping_call.
parse_integer and parse_string can take a request and raise errors
in case we have wrong or missing params.
This PR tries to use them more to deduplicate some code and make it
better readable
The transaction cache has some code which tries to stop it caching failures,
but if the callback function failed straight away, then things would happen
backwards and we'd end up with the failure stuck in the cache.
(instead of everywhere that writes a response. Or rather, the subset of places
which write responses where we haven't forgotten it).
This also means that we don't have to have the mysterious version_string
attribute in anything with a request handler.
Unfortunately it does mean that we have to pass the version string wherever we
instantiate a SynapseSite, which has been c&ped 150 times, but that is code
that ought to be cleaned up anyway really.
This closes#2602
v1auth was created to account for the differences in status code between
the v1 and v2_alpha revisions of the protocol (401 vs 403 for invalid
tokens). However since those protocols were merged, this makes the r0
version/endpoint internally inconsistent, and violates the
specification for the r0 endpoint.
This might break clients that rely on this inconsistency with the
specification. This is said to affect the legacy angular reference
client. However, I feel that restoring parity with the spec is more
important. Either way, it is critical to inform developers about this
change, in case they rely on the illegal behaviour.
Signed-off-by: Adrian Tschira <nota@notafile.com>
While I was going through uses of preserve_fn for other PRs, I converted places
which only use the wrapped function once to use run_in_background, to avoid
creating the function object.
There were a bunch of places where we fire off a process to happen in the
background, but don't have any exception handling on it - instead relying on
the unhandled error being logged when the relevent deferred gets
garbage-collected.
This is unsatisfactory for a number of reasons:
- logging on garbage collection is best-effort and may happen some time after
the error, if at all
- it can be hard to figure out where the error actually happened.
- it is logged as a scary CRITICAL error which (a) I always forget to grep for
and (b) it's not really CRITICAL if a background process we don't care about
fails.
So this is an attempt to add exception handling to everything we fire off into
the background.
The old style raise is invalid syntax in python3. As noted in the docs,
this adds one more frame in the traceback, but I think this is
acceptable:
<ipython-input-7-bcc5cba3de3f> in <module>()
16 except:
17 pass
---> 18 six.reraise(*x)
/usr/lib/python3.6/site-packages/six.py in reraise(tp, value, tb)
691 if value.__traceback__ is not tb:
692 raise value.with_traceback(tb)
--> 693 raise value
694 finally:
695 value = None
<ipython-input-7-bcc5cba3de3f> in <module>()
9
10 try:
---> 11 x()
12 except:
13 x = sys.exc_info()
Also note that this uses six, which is not formally a dependency yet,
but is included indirectly since most packages depend on it.
Signed-off-by: Adrian Tschira <nota@notafile.com>
The API is now under
/groups/$group_id/setting/m.join_policy
and expects a JSON blob of the shape
```json
{
"m.join_policy": {
"type": "invite"
}
}
```
where "invite" could alternatively be "open".
Currently the handling of auto_join_rooms only works when a user
registers itself via public register api. Registrations via
registration_shared_secret and ModuleApi do not work
This auto_joins the users in the registration handler which enables
the auto join feature for all 3 registration paths.
This is related to issue #2725
Signed-Off-by: Matthias Kesler <krombel@krombel.de>
Add federation_domain_whitelist
gives a way to restrict which domains your HS is allowed to federate with.
useful mainly for gracefully preventing a private but internet-connected HS from trying to federate to the wider public Matrix network
This is intended to be used by administrators to monitor the media that is passing through their server, if they wish.
Signed-off-by: Travis Ralston <travpc@gmail.com>
* [ ] split config options into allowed_local_3pids and registrations_require_3pid
* [ ] simplify and comment logic for picking registration flows
* [ ] fix docstring and move check_3pid_allowed into a new util module
* [ ] use check_3pid_allowed everywhere
@erikjohnston PTAL
lets homeservers specify a whitelist for 3PIDs that users are allowed to associate with.
Typically useful for stopping people from registering with non-work emails
