The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We can get a SIGHUP at any point, including times where we are not in a
sane state. By deferring calling the handlers until the next reactor
tick we ensure that we don't get unexpected conflicts, e.g. trying to
flush logs from the signal handler while the code was in the process of
writing a log entry.
Fixes#8769.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Duplicating function signatures between server.py and server.pyi is
silly. This commit changes that by changing all `build_*` methods to
`get_*` methods and changing the `_make_dependency_method` to work work
as a descriptor that caches the produced value.
There are some changes in other files that were made to fix the typing
in server.py.
This has long been something I've wanted to do. Basically the `Daemonize` code
is both too flexible and not flexible enough, in that it offers a bunch of
features that we don't use (changing UID, closing FDs in the child, logging to
syslog) and doesn't offer a bunch that we could do with (redirecting stdout/err
to a file instead of /dev/null; having the parent not exit until the child is
running).
As a first step, I've lifted the Daemonize code and removed the bits we don't
use. This should be a non-functional change. Fixing everything else will come
later.
Handling of incoming typing stream updates from replication was not
hooked up on master, effecting set ups where typing was handled on a
different worker.
This is really only a problem if the master process is also handling
sync requests, which is unlikely for those that are at the stage of
moving typing off.
The other observable effect is that if a worker restarts or a
replication connect drops then the typing worker will issue a
`POSITION typing`, triggering master process to try and stream *all*
typing updates from position 0.
Fixes#7907
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
A couple of changes of significance:
* remove the `_last_ack < federation_position` condition, so that
updates will still be correctly processed after restart
* Correctly wire up send_federation_ack to the right class.
We don't really make any promises about returning accurate presence data when
presence is disabled, so we may as well just return a static response, rather
than making the master handle a request.
This is required as both event persistence and the background update needs access to this function. It should be perfectly safe for two workers to write to that table at the same time.
For in memory streams when fetching updates on workers we need to query the source of the stream, which currently is hard coded to be master. This PR threads through the source instance we received via `POSITION` through to the update function in each stream, which can then be passed to the replication client for in memory streams.
We move the processing of typing and federation replication traffic into their handlers so that `Stream.current_token()` points to a valid token. This allows us to remove `get_streams_to_replicate()` and `stream_positions()`.
By persisting the user interactive authentication sessions to the database, this fixes
situations where a user hits different works throughout their auth session and also
allows sessions to persist through restarts of Synapse.
This is primarily for allowing us to send those commands from workers, but for now simply allows us to ignore echoed RDATA/POSITION commands that we sent (we get echoes of sent commands when using redis). Currently we log a WARNING on the master process every time we receive an echoed RDATA.
Long story short: if we're handling presence on the current worker, we shouldn't be sending USER_SYNC commands over replication.
In an attempt to figure out what is going on here, I ended up refactoring some bits of the presencehandler code, so the first 4 commits here are non-functional refactors to move this code slightly closer to sanity. (There's still plenty to do here :/). Suggest reviewing individual commits.
Fixes (I hope) #7257.
The aim here is to move the command handling out of the TCP protocol classes and to also merge the client and server command handling (so that we can reuse them for redis protocol). This PR simply moves the client paths to the new `ReplicationCommandHandler`, a future PR will move the server paths too.
* Remove `conn_id` usage for UserSyncCommand.
Each tcp replication connection is assigned a "conn_id", which is used
to give an ID to a remotely connected worker. In a redis world, there
will no longer be a one to one mapping between connection and instance,
so instead we need to replace such usages with an ID generated by the
remote instances and included in the replicaiton commands.
This really only effects UserSyncCommand.
* Add CLEAR_USER_SYNCS command that is sent on shutdown.
This should help with the case where a synchrotron gets restarted
gracefully, rather than rely on 5 minute timeout.
This changes the replication protocol so that the server does not send down `RDATA` for rows that happened before the client connected. Instead, the server will send a `POSITION` and clients then query the database (or master out of band) to get up to date.
* Add 'device_lists_outbound_pokes' as extra table.
This makes sure we check all the relevant tables to get the current max
stream ID.
Currently not doing so isn't problematic as the max stream ID in
`device_lists_outbound_pokes` is the same as in `device_lists_stream`,
however that will change.
* Change device lists stream to have one row per id.
This will make it possible to process the streams more incrementally,
avoiding having to process large chunks at once.
* Change device list replication to match new semantics.
Instead of sending down batches of user ID/host tuples, send down a row
per entity (user ID or host).
* Newsfile
* Remove handling of multiple rows per ID
* Fix worker handling
* Comments from review
This should be safe to do on all workers/masters because it is guarded by
a config option which will ensure it is only actually done on the worker
assigned as a pusher.
Instead lets just warn if the worker has a media listener configured but
has the media repository disabled.
Previously non media repository workers would just ignore the media
listener.
We were sending device updates down both the federation stream and
device streams. This mean there was a race if the federation sender
worker processed the federation stream first, as when the sender checked
if there were new device updates the slaved ID generator hadn't been
updated with the new stream IDs and so returned nothing.
This situation is correctly handled by events/receipts/etc by not
sending updates down the federation stream and instead having the
federation sender worker listen on the other streams and poke the
transaction queues as appropriate.
* Port synapse.replication.tcp to async/await
* Newsfile
* Correctly document type of on_<FOO> functions as async
* Don't be overenthusiastic with the asyncing....
AdditionalResource really doesn't add any value, and it gets in the way for
resources which want to support child resources or the like. So, if the
resource object already implements the IResource interface, don't bother
wrapping it.
If acme was enabled, the sdnotify startup hook would never be run because we
would try to add it to a hook which had already fired.
There's no need to delay it: we can sdnotify as soon as we've started the
listeners.
=============================
Bugfixes
--------
- Fix incorrect error message for invalid requests when setting user's avatar URL. ([\#6497](https://github.com/matrix-org/synapse/issues/6497))
- Fix support for SQLite 3.7. ([\#6499](https://github.com/matrix-org/synapse/issues/6499))
- Fix regression where sending email push would not work when using a pusher worker. ([\#6507](https://github.com/matrix-org/synapse/issues/6507), [\#6509](https://github.com/matrix-org/synapse/issues/6509))
-----BEGIN PGP SIGNATURE-----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=ABoZ
-----END PGP SIGNATURE-----
Merge tag 'v1.7.0rc2' into develop
Synapse 1.7.0rc2 (2019-12-11)
=============================
Bugfixes
--------
- Fix incorrect error message for invalid requests when setting user's avatar URL. ([\#6497](https://github.com/matrix-org/synapse/issues/6497))
- Fix support for SQLite 3.7. ([\#6499](https://github.com/matrix-org/synapse/issues/6499))
- Fix regression where sending email push would not work when using a pusher worker. ([\#6507](https://github.com/matrix-org/synapse/issues/6507), [\#6509](https://github.com/matrix-org/synapse/issues/6509))
The `http_proxy` and `HTTPS_PROXY` env vars can be set to a `host[:port]` value which should point to a proxy.
The address of the proxy should be excluded from IP blacklists such as the `url_preview_ip_range_blacklist`.
The proxy will then be used for
* push
* url previews
* phone-home stats
* recaptcha validation
* CAS auth validation
It will *not* be used for:
* Application Services
* Identity servers
* Outbound federation
* In worker configurations, connections from workers to masters
Fixes#4198.
This is a combination of a few different PRs, finally all being merged into `develop`:
* #5875
* #5876
* #5868 (This one added the `/versions` flag but the flag itself was actually [backed out](891afb57cb (diff-e591d42d30690ffb79f63bb726200891)) in #5969. What's left is just giving /versions access to the config file, which could be useful in the future)
* #5835
* #5969
* #5940
Clients should not actually use the new registration functionality until https://github.com/matrix-org/synapse/pull/5972 is merged.
UPGRADE.rst, changelog entries and config file changes should all be reviewed closely before this PR is merged.
Python will return a tuple whether there are parentheses around the returned values or not.
I'm just sick of my editor complaining about this all over the place :)
