* Fix `track_memory_usage` on poetry-core 1.3.x installations
The same kind of problem as discussed in #14085:
1. we defined an extra with an underscore
2. we look it up at runtime with an underscore
3. but poetry-core 1.3.x. installs it with a dash, causing (2) to fail.
Fix by using a dash everywhere.
* Changelog
Spawned while investigating https://github.com/matrix-org/synapse/issues/13944
This way we might get some more context whenever an `403 Forbidden - body: {"errcode":"M_FORBIDDEN","error":"You don't have permission to access that event."}` error is produced.
`log_config.yaml`
```yaml
loggers:
synapse:
level: INFO
synapse.visibility:
level: DEBUG
```
This should fix a race where the event notification comes in over
replication before the state replication, leaving a window during
which a sync may get an incorrect list of rooms for the user.
While https://github.com/matrix-org/synapse/pull/13635 stops us from doing the slow thing after we've already done it once, this PR stops us from doing one of the slow things in the first place.
Related to
- https://github.com/matrix-org/synapse/issues/13622
- https://github.com/matrix-org/synapse/pull/13635
- https://github.com/matrix-org/synapse/issues/13676
Part of https://github.com/matrix-org/synapse/issues/13356
Follow-up to https://github.com/matrix-org/synapse/pull/13815 which tracks event signature failures.
With this PR, we avoid the call to the costly `_get_state_ids_after_missing_prev_event` because the signature failure will count as an attempt before and we filter events based on the backoff before calling `_get_state_ids_after_missing_prev_event` now.
For example, this will save us 156s out of the 185s total that this `matrix.org` `/messages` request. If you want to see the full Jaeger trace of this, you can drag and drop this `trace.json` into your own Jaeger, https://gist.github.com/MadLittleMods/4b12d0d0afe88c2f65ffcc907306b761
To explain this exact scenario around `/messages` -> backfill, we call `/backfill` and first check the signatures of the 100 events. We see bad signature for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` and `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` (both member events). Then we process the 98 events remaining that have valid signatures but one of the events references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event`. So we have to do the whole `_get_state_ids_after_missing_prev_event` rigmarole which pulls in those same events which fail again because the signatures are still invalid.
- `backfill`
- `outgoing-federation-request` `/backfill`
- `_check_sigs_and_hash_and_fetch`
- `_check_sigs_and_hash_and_fetch_one` for each event received over backfill
- ❗ `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- ❗ `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` fails with `Signature on retrieved event was invalid.`: `unable to verify signature for sender domain xxx: 401: Failed to find any key to satisfy: _FetchKeyRequest(...)`
- `_process_pulled_events`
- `_process_pulled_event` for each validated event
- ❗ Event `$Q0iMdqtz3IJYfZQU2Xk2WjB5NDF8Gg8cFSYYyKQgKJ0` references `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` as a `prev_event` which is missing so we try to get it
- `_get_state_ids_after_missing_prev_event`
- `outgoing-federation-request` `/state_ids`
- ❗ `get_pdu` for `$luA4l7QHhf_jadH3mI-AyFqho0U2Q-IXXUbGSMq6h6M` which fails the signature check again
- ❗ `get_pdu` for `$zuOn2Rd2vsC7SUia3Hp3r6JSkSFKcc5j3QTTqW_0jDw` which fails the signature check
The root node of a thread (and events related to it) are considered
"part of a thread" when validating receipts. This allows clients which
show the root node in both the main timeline and the threaded timeline
to easily send receipts in either.
Note that threaded notifications are not created for these events, these
events created notifications on the main timeline.
The callers either set a default limit or manually handle a None-limit
later on (by setting a default value).
Update the callers to always instantiate PaginationConfig with a default
limit and then assume the limit is non-None.
Stabilize the threads API (MSC3856) by supporting (only) the v1
path for the endpoint.
This also marks the API as safe for workers since it is a read-only
API.
Implement the /threads endpoint from MSC3856.
This is currently unstable and behind an experimental configuration
flag.
It includes a background update to backfill data, results from
the /threads endpoint will be partial until that finishes.
**Before:**
```
WARNING - POST-11 - Unable to parse JSON: Expecting value: line 1 column 1 (char 0) (b'')
```
**After:**
```
WARNING - POST-11 - Unable to parse JSON from POST /_matrix/client/v3/join/%21ZlmJtelqFroDRJYZaq:hs1?server_name=hs1 response: Expecting value: line 1 column 1 (char 0) (b'')
```
---
It's possible to figure out which endpoint these warnings were coming from before but you had to follow the request ID `POST-11` to the log line that says `Completed request [...]`. Including this key information next to the JSON parsing error makes it much easier to reason whether it matters or not.
```
2022-09-29T08:23:25.7875506Z synapse_main | 2022-09-29 08:21:10,336 - synapse.http.matrixfederationclient - 299 - INFO - POST-11 - {GET-O-13} [hs1] Completed request: 200 OK in 0.53 secs, got 450 bytes - GET matrix://hs1/_matrix/federation/v1/make_join/%21ohtKoQiXlPePSycXwp%3Ahs1/%40charlie%3Ahs2?ver=1&ver=2&ver=3&ver=4&ver=5&ver=6&ver=org.matrix.msc2176&ver=7&ver=8&ver=9&ver=org.matrix.msc3787&ver=10&ver=org.matrix.msc2716v4
```
---
As a note, having no `body` is normal for the `/join` endpoint and it can handle it.
0c853e0970/synapse/rest/client/room.py (L398-L403)
Alternatively we could remove these extra logs but they are probably more usually helpful to figure out what went wrong.
Fixes two related bugs:
* No edit information was bundled for events which aren't `m.room.message`.
* `m.new_content` was not applied for those events.
* Revert to prior build-system requirements
This reverts #14080.
* Use normalised extra name, which poetry-core 1.3 will generate anyway
* Changelog
* Upper bound build-system requirements
* Remove upgrade note; expand changelog entry a little.
* Fix typo in build-system comment
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Attempt to parse any valid information from an oEmbed response
(instead of bailing at the first unexpected data). This should allow
for more partial oEmbed data to be returned, resulting in better /
more URL previews, even if those URL previews are only partial.
==============================
Please note that legacy Prometheus metric names are now deprecated and will be removed in Synapse 1.73.0.
Server administrators should update their dashboards and alerting rules to avoid using the deprecated metric names.
See the [upgrade notes](https://matrix-org.github.io/synapse/v1.69/upgrade.html#upgrading-to-v1690) for more details.
Deprecations and Removals
-------------------------
- Deprecate the `generate_short_term_login_token` method in favor of an async `create_login_token` method in the Module API. ([\#13842](https://github.com/matrix-org/synapse/issues/13842))
Internal Changes
----------------
- Ensure Synapse v1.69 works with upcoming database changes in v1.70. ([\#14045](https://github.com/matrix-org/synapse/issues/14045))
- Fix a bug introduced in Synapse v1.68.0 where messages could not be sent in rooms with non-integer `notifications` power level. ([\#14073](https://github.com/matrix-org/synapse/issues/14073))
- Temporarily pin build-system requirements to workaround an incompatibility with poetry-core 1.3.0. This will be reverted before the v1.69.0 release proper, see [\#14079](https://github.com/matrix-org/synapse/issues/14079). ([\#14080](https://github.com/matrix-org/synapse/issues/14080))
-----BEGIN PGP SIGNATURE-----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=Iu7b
-----END PGP SIGNATURE-----
Merge tag 'v1.69.0rc2' into develop
Synapse 1.69.0rc2 (2022-10-06)
==============================
Please note that legacy Prometheus metric names are now deprecated and will be removed in Synapse 1.73.0.
Server administrators should update their dashboards and alerting rules to avoid using the deprecated metric names.
See the [upgrade notes](https://matrix-org.github.io/synapse/v1.69/upgrade.html#upgrading-to-v1690) for more details.
Deprecations and Removals
-------------------------
- Deprecate the `generate_short_term_login_token` method in favor of an async `create_login_token` method in the Module API. ([\#13842](https://github.com/matrix-org/synapse/issues/13842))
Internal Changes
----------------
- Ensure Synapse v1.69 works with upcoming database changes in v1.70. ([\#14045](https://github.com/matrix-org/synapse/issues/14045))
- Fix a bug introduced in Synapse v1.68.0 where messages could not be sent in rooms with non-integer `notifications` power level. ([\#14073](https://github.com/matrix-org/synapse/issues/14073))
- Temporarily pin build-system requirements to workaround an incompatibility with poetry-core 1.3.0. This will be reverted before the v1.69.0 release proper, see [\#14079](https://github.com/matrix-org/synapse/issues/14079). ([\#14080](https://github.com/matrix-org/synapse/issues/14080))
Fixes two related bugs:
* The handling of `[null]` for a `room_types` filter was incorrect.
* The ordering of arguments when providing both a network tuple
and room type field was incorrect.
By getting the joined rooms before the current token we avoid any reading
history to confirm a user *was* in a room. We can then use any membership
change events, which we already fetch during sync, to determine the final
list of joined room IDs.
Applies the proper logic for unthreaded and threaded receipts to either
apply to all events in the room or only events in the same thread, respectively.
When retrieving counts of notifications segment the results based on the
thread ID, but choose whether to return them as individual threads or as
a single summed field by letting the client opt-in via a sync flag.
The summarization code is also updated to be per thread, instead of per
room.
Implements MSC2832 by sending application service access
tokens in the Authorization header.
The access token is also still sent as a query parameter until
the application service ecosystem has fully migrated to using
headers. In the future this could be made opt-in, or removed
completely.
Keep the old behavior (of including the original_event field) for any
requests to the /unstable version of the endpoint, but do not include
the field when the /v1 version is used.
This should avoid new clients from depending on this field, but will
not help with current dependencies.
MSC3316 declares that both /rooms/{roomId}/send and /rooms/{roomId}/state
should accept a ts parameter for appservices. This change expands support
to /state and adds tests.
Instead of running a single large query, run a single query for
user-only lookups and additional queries for batches of user device
lookups.
Resolves#13580.
Signed-off-by: Sean Quah <seanq@matrix.org>
Spawned while working on [`get_users_in_room` mis-uses](https://github.com/matrix-org/synapse/pull/13958#discussion_r984074897) and thinking we could use `get_local_users_in_room` here but we can't.
From first glance, it seemed like this was only using local users from all of the `is_mine_id(user_id)` checks but I see that it does actually use remote users. Just making things a little more clear here what it does and mentions remote users so maybe that will be more obvious in the future.
* Update mypy and mypy-zope
* Unignore assigning to LogRecord attributes
Presumably https://github.com/python/typeshed/pull/8064 makes this ok
Cherry-picked from #13521
* Remove unused ignores due to mypy ParamSpec fixes
https://github.com/python/mypy/pull/12668
Cherry-picked from #13521
* Remove additional unused ignores
* Fix new mypy complaints related to `assertGreater`
Presumably due to https://github.com/python/typeshed/pull/8077
* Changelog
* Reword changelog
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
We move the expensive check of visibility to after calculating push actions, avoiding the expensive check for users who won't get pushed anyway.
I think this should have a big impact on rooms with large numbers of local users that have pushed disabled.
Fixes#13942. Introduced in #13575.
Basically, let's only get the ordered set of hosts out of the DB if we need an ordered set of hosts. Since we split the function up the caching won't be as good, but I think it will still be fine as e.g. multiple backfill requests for the same room will hit the cache.
There is no need to grab thousands of backfill points when we only need 5 to make the `/backfill` request with. We need to grab a few extra in case the first few aren't visible in the history.
Previously, we grabbed thousands of backfill points from the database, then sorted and filtered them in the app. Fetching the 4.6k backfill points for `#matrix:matrix.org` from the database takes ~50ms - ~570ms so it's not like this saves a lot of time 🤷. But it might save us more time now that `get_backfill_points_in_room`/`get_insertion_event_backward_extremities_in_room` are more complicated after https://github.com/matrix-org/synapse/pull/13635
This PR moves the filtering and limiting to the SQL query so we just have less data to work with in the first place.
Part of https://github.com/matrix-org/synapse/issues/13356
c.f. #12993 (comment), point 3
This stores all device list updates that we receive while partial joins are ongoing, and processes them once we have the full state.
Note: We don't actually process the device lists in the same ways as if we weren't partially joined. Instead of updating the device list remote cache, we simply notify local users that a change in the remote user's devices has happened. I think this is safe as if the local user requests the keys for the remote user and we don't have them we'll simply fetch them as normal.
This PR begins work on batching up events during the creation of a room. The PR splits out the creation and sending/persisting of the events. The first three events in the creation of the room-creating the room, joining the creator to the room, and the power levels event are sent sequentially, while the subsequent events are created and collected to be sent at the end of the function. This is currently done by appending them to a list and then iterating over the list to send, the next step (after this PR) would be to send and persist the collected events as a batch.
Fix https://github.com/matrix-org/synapse/issues/13856
Fix https://github.com/matrix-org/synapse/issues/13865
> Discovered while trying to make Synapse fast enough for [this MSC2716 test for importing many batches](https://github.com/matrix-org/complement/pull/214#discussion_r741678240). As an example, disabling the `have_seen_event` cache saves 10 seconds for each `/messages` request in that MSC2716 Complement test because we're not making as many federation requests for `/state` (speeding up `have_seen_event` itself is related to https://github.com/matrix-org/synapse/issues/13625)
>
> But this will also make `/messages` faster in general so we can include it in the [faster `/messages` milestone](https://github.com/matrix-org/synapse/milestone/11).
>
> *-- https://github.com/matrix-org/synapse/issues/13856*
### The problem
`_invalidate_caches_for_event` doesn't run in monolith mode which means we never even tried to clear the `have_seen_event` and other caches. And even in worker mode, it only runs on the workers, not the master (AFAICT).
Additionally there was bug with the key being wrong so `_invalidate_caches_for_event` never invalidates the `have_seen_event` cache even when it does run.
Because we were using the `@cachedList` wrong, it was putting items in the cache under keys like `((room_id, event_id),)` with a `set` in a `set` (ex. `(('!TnCIJPKzdQdUlIyXdQ:test', '$Iu0eqEBN7qcyF1S9B3oNB3I91v2o5YOgRNPwi_78s-k'),)`) and we we're trying to invalidate with just `(room_id, event_id)` which did nothing.
Since MSC3715 has passed FCP, the stable parameter can be used.
This currently falls back to the unstable parameter if the stable
parameter is not provided (and MSC3715 support is enabled in
the configuration).
Since #11482, we're saving sessions IDs from upstream IdPs, but we've been losing them when the user goes through a user mapping session on account registration.
During a `lazy_load_members` `/sync`, we look through auth events in
rooms with partial state to find prior membership events. When such a
membership is not found, an error is logged.
Since the first join event for a user never has a prior membership event
to cite, the error would always be logged when one appeared in the room
timeline.
Avoid logging errors for such events.
Introduced in #13477.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should mean that logs from worker processes are flushed before shutdown.
When a test completes, Complement stops the docker container, which means that
synapse will receive a SIGTERM. Currently, the `complement_fork_starter` exits
immediately (without notifying the worker processes), which means that the
workers never get a chance to flush their logs before the whole container is
vaped. We can fix this by propagating the SIGTERM to the children.
This is also using the partial state approximation if needed so we do
not block here during a fast join.
Signed-off-by: Mathieu Velten <mathieuv@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
This moves all the invalidations into a single place and de-duplicates
the code involved in invalidating caches for a given event by using
the base class method.
* Lockfile: update canonicaljson 1.6.0 -> 1.6.3
* Fix mypy errors with latest canonicaljson
The change to `_encode_json_bytes` definition wasn't sufficient:
```
synapse/http/server.py:751: error: Incompatible types in assignment (expression has type "Callable[[Arg(object, 'json_object')], bytes]", variable has type "Callable[[Arg(object, 'data')], bytes]") [assignment]
```
Which I think is mypy warning us that the two functions accept different
sets of kwargs. Fair enough!
* Changelog
Part of the work for #12993.
Once #12993 is fully resolved, we expect `/keys/changes` to behave
sensibly when joined to a room with partial state.
Signed-off-by: Sean Quah <seanq@matrix.org>
Use the provided list of servers in the room from the `/send_join`
response, since we will not know which users are in the room. This
isn't sufficient to ensure that all remote servers receive the right
device list updates, since the `/send_join` response may be inaccurate
or we may calculate the membership state of new users in the room
incorrectly.
Signed-off-by: Sean Quah <seanq@matrix.org>
This fixes a bug where the `/relations` API with `dir=f` would
skip the first item of each page (except the first page), causing
incomplete data to be returned to the client.
* Generate separate snapshots for sqlite, postgres and common
* Cleanup postgres dbs in the TRAP
* Say which logical DB we're applying updates to
* Run background updates on the state DB
* Add new option for accepting a SCHEMA_NUMBER
Adds a `thread_id` column to the `event_push_actions`, `event_push_actions_staging`,
and `event_push_summary` tables. This will notifications to be segmented by the thread
in a future pull request. The `thread_id` column stores the root event ID or the special
value `"main"`.
The `thread_id` column for `event_push_actions` and `event_push_summary` is
backfilled with `"main"` for all existing rows. New entries into `event_push_actions`
and `event_push_actions_staging` will get the proper thread ID.
`receipts_linearized` and `receipts_graph` also gain a `thread_id` column, which is similar,
except `NULL` is a special value meaning the receipt is "unthreaded".
See MSC3771 and MSC3773 for where this data will be useful.
Partial indices have been supported since SQLite 3.8, but Synapse
now requires >= 3.27, so we can enable support for them.
This requires rebuilding previous indices which were partial on
PostgreSQL, but not on SQLite.
* Remove incorrect migration file from `state` logical DB
The table `ex_outlier_stream` is part of the `main` logical DB; it
should not have been created in the `state` logical DB. We remove this
migration now as a tidy-up.
Note: we cannot `DROP TABLE IF EXISTS ex_outlier_stream` in a new
migration, because some (most) instances of Synapse host both of these
logical DBs on the same DB cluster.
* Changelog
When a remote user leaves the last room shared with the homeserver, we
have to mark their device list as unsubscribed, otherwise we would hold
on to a stale device list in our cache. Crucially, the device list would
remain cached even after the remote user rejoined the room, which could
lead to E2EE failures until the next change to the remote user's device
list.
Fixes#13651.
Signed-off-by: Sean Quah <seanq@matrix.org>
* Don't accept a trailing slash on the end of /get_missing_events
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Remove checks for membership column in current_state_events
* Add schema script to force through the
`current_state_events_membership` background job
Contributed by Nick @ Beeper (@fizzadar).
Most of the time this function is heavily cached, but when that isn't
the case fetching the counts room by room slows down push delivery on
users with many (thousands) of rooms.
Signed off by Nick @ Beeper.
The problem with many services is that it makes it hard to find which service has the trace you want, see https://github.com/jaegertracing/jaeger-ui/issues/985
Previously, we split traces out into services based on their instance name like `matrix.org client_reader-1`, etc but there are many worker instances of the same `client_reader` so there is a lot to click through.
With this PR, all of the traces are just collected under the worker type like `client_reader`, `event_persister` 😇
Note: A Synapse worker instance name is an opaque string with the number convention only being our own thing for the `matrix.org` deployment. But seems pretty sensible to group things this way.
Update the docstrings for `get_users_in_room` and
`get_current_hosts_in_room` to explain the impact of partial state.
Signed-off-by: Sean Quah <seanq@matrix.org>
Handle malformed user IDs with no colons in `get_current_hosts_in_room`.
It's not currently possible for a malformed user ID to join a room, so
this error would never be hit.
Signed-off-by: Sean Quah <seanq@matrix.org>
Previously, `is_mine_id` would raise an exception when passed an ID with
no colons. Return `False` instead.
Fixes#13040.
Signed-off-by: Sean Quah <seanq@matrix.org>
When backfilling, `_get_state_ids_after_missing_prev_event` calls [`get_metadata_for_events`](26bc26586b/synapse/handlers/federation_event.py (L1133)). For `#matrix:matrix.org`, it's called with 77k `state_events` which means 77 calls to the database and takes 28 seconds.
This is a re-do of 57d334a13d (#13365),
which was backed out in 12abd72497 (#13501).
The `room_id` field represented the parent space for each room
and was made redundant by changes in the API shape where the
`children_state` is now nested underneath each `room`.
The room ID of each child is in the `state_key` field and is still
available.
This avoids doing work that will never be used (since the
resulting unread counts will never be sent in a /sync
response).
The negative of doing this is that unread counts will be
incorrect when the feature is initially enabled.
The method doesn't actually do any data fetching and the method that
does, `_get_joined_profile_from_event_id`, has its own cache.
Signed off by Nick @ Beeper (@Fizzadar).
We incorrectly didn't use the returned `Responder` if the client had
disconnected, which meant that the resource used by the Responder
wasn't correctly released.
In particular, this exhausted the thread pools so that *all* requests
timed out.
Media downloaded as part of a URL preview is normally deleted after two days.
However, while a background database migration is running, the process is
stopped. A long-running database migration can therefore cause the media
store to fill up with old preview files.
This logic was added in #2697 to make sure that we didn't try to run the expiry
without an index on `local_media_repository.created_ts`; the original logic that
needs that index was added in #2478 (in `get_url_cache_media_before`, as
amended by 93247a424a), and is still present.
Given that the background update was added before Synapse v1.0.0, just drop
this check and assume the index exists.
Optimize how we calculate `likely_domains` during backfill because I've seen this take 17s in production just to `get_current_state` which is used to `get_domains_from_state` (see case [*2. Loading tons of events* in the `/messages` investigation issue](https://github.com/matrix-org/synapse/issues/13356)).
There are 3 ways we currently calculate hosts that are in the room:
1. `get_current_state` -> `get_domains_from_state`
- Used in `backfill` to calculate `likely_domains` and `/timestamp_to_event` because it was cargo-culted from `backfill`
- This one is being eliminated in favor of `get_current_hosts_in_room` in this PR 🕳
1. `get_current_hosts_in_room`
- Used for other federation things like sending read receipts and typing indicators
1. `get_hosts_in_room_at_events`
- Used when pushing out events over federation to other servers in the `_process_event_queue_loop`
Fix https://github.com/matrix-org/synapse/issues/13626
Part of https://github.com/matrix-org/synapse/issues/13356
Mentioned in [internal doc](https://docs.google.com/document/d/1lvUoVfYUiy6UaHB6Rb4HicjaJAU40-APue9Q4vzuW3c/edit#bookmark=id.2tvwz3yhcafh)
### Query performance
#### Before
The query from `get_current_state` sucks just because we have to get all 80k events. And we see almost the exact same performance locally trying to get all of these events (16s vs 17s):
```
synapse=# SELECT type, state_key, event_id FROM current_state_events WHERE room_id = '!OGEhHVWSdvArJzumhm:matrix.org';
Time: 16035.612 ms (00:16.036)
synapse=# SELECT type, state_key, event_id FROM current_state_events WHERE room_id = '!OGEhHVWSdvArJzumhm:matrix.org';
Time: 4243.237 ms (00:04.243)
```
But what about `get_current_hosts_in_room`: When there is 8M rows in the `current_state_events` table, the previous query in `get_current_hosts_in_room` took 13s from complete freshness (when the events were first added). But takes 930ms after a Postgres restart or 390ms if running back to back to back.
```sh
$ psql synapse
synapse=# \timing on
synapse=# SELECT COUNT(DISTINCT substring(state_key FROM '@[^:]*:(.*)$'))
FROM current_state_events
WHERE
type = 'm.room.member'
AND membership = 'join'
AND room_id = '!OGEhHVWSdvArJzumhm:matrix.org';
count
-------
4130
(1 row)
Time: 13181.598 ms (00:13.182)
synapse=# SELECT COUNT(*) from current_state_events where room_id = '!OGEhHVWSdvArJzumhm:matrix.org';
count
-------
80814
synapse=# SELECT COUNT(*) from current_state_events;
count
---------
8162847
synapse=# SELECT pg_size_pretty( pg_total_relation_size('current_state_events') );
pg_size_pretty
----------------
4702 MB
```
#### After
I'm not sure how long it takes from complete freshness as I only really get that opportunity once (maybe restarting computer but that's cumbersome) and it's not really relevant to normal operating times. Maybe you get closer to the fresh times the more access variability there is so that Postgres caches aren't as exact. Update: The longest I've seen this run for is 6.4s and 4.5s after a computer restart.
After a Postgres restart, it takes 330ms and running back to back takes 260ms.
```sh
$ psql synapse
synapse=# \timing on
Timing is on.
synapse=# SELECT
substring(c.state_key FROM '@[^:]*:(.*)$') as host
FROM current_state_events c
/* Get the depth of the event from the events table */
INNER JOIN events AS e USING (event_id)
WHERE
c.type = 'm.room.member'
AND c.membership = 'join'
AND c.room_id = '!OGEhHVWSdvArJzumhm:matrix.org'
GROUP BY host
ORDER BY min(e.depth) ASC;
Time: 333.800 ms
```
#### Going further
To improve things further we could add a `limit` parameter to `get_current_hosts_in_room`. Realistically, we don't need 4k domains to choose from because there is no way we're going to query that many before we a) probably get an answer or b) we give up.
Another thing we can do is optimize the query to use a index skip scan:
- https://wiki.postgresql.org/wiki/Loose_indexscan
- Index Skip Scan, https://commitfest.postgresql.org/37/1741/
- https://www.timescale.com/blog/how-we-made-distinct-queries-up-to-8000x-faster-on-postgresql/
If things like the signing key file are missing, let's just try to generate
them on startup.
Again, this is useful for k8s-like deployments where we just want to generate
keys on the first run.
When loading current ids, sort by stream ID so that we don't want to overwrite the `current_position` of an instance to a lower stream ID than we're actually at ([discussion](https://github.com/matrix-org/synapse/pull/13585#discussion_r951795379)). Previously, it sorted alphabetically by instance name which can be `null` and throw errors but more importantly, accomplishes nothing.
Fixes the following startup error which is why I started looking into this area:
```
$ poetry run synapse_homeserver --config-path homeserver.yaml
****************************************************************
Error during initialisation:
'<' not supported between instances of 'NoneType' and 'str'
There may be more information in the logs.
****************************************************************
```
Somehow my database ended up looking like the following, notice the `instance_name` is `null` in the db, and we can't sort `NoneType` things. Another question is why do we see the `instance_name` as `null` sometimes instead of `master` in monolith mode?
```
$ psql synapse
synapse=# SELECT * FROM stream_positions;
stream_name | instance_name | stream_id
-----------------+---------------+-----------
account_data | master | 1242
events | master | 1787
to_device | master | 58
presence_stream | master | 485638
receipts | master | 341
backfill | master | -139106
(6 rows)
synapse=# SELECT instance_name, stream_id FROM receipts_linearized;
instance_name | stream_id
---------------+-----------
| 211
| 3
| 4
| 212
| 213
| 224
| 228
| 164
| 313
| 253
| 38
| 321
| 324
| 189
| 192
| 193
| 194
| 195
| 197
| 198
| 275
| 79
| 339
| 340
| 82
| 341
| 84
| 85
| 91
| 119
```
Use dedicated `get_local_users_in_room` to find local users when calculating `join_authorised_via_users_server` ("the authorising user for joining a restricted room") of a `/make_join` request.
Found while working on https://github.com/matrix-org/synapse/pull/13575#discussion_r953023755 but it's not related.
This speeds things up by ~2x.
The vast majority of the time is now spent in `LruCache` moving things around the linked lists.
We do this via two things:
1. Don't create a deferred per-key during bulk set operations in `DeferredCache`. Instead, only create them if a subsequent caller asks for the key.
2. Add a bulk lookup API to `DeferredCache` rather than use a loop.
Part of #13019
This changes all the permission-related methods to rely on the Requester instead of the UserID. This is a first step towards enabling scoped access tokens at some point, since I expect the Requester to have scope-related informations in it.
It also changes methods which figure out the user/device/appservice out of the access token to return a Requester instead of something else. This avoids having store-related objects in the methods signatures.
Use a state filter or accept partial state in a few places where we
request state, to avoid blocking.
To make lazy-loading `/sync`s work, we need to provide the memberships
of event senders, which are not guaranteed to be in the room state.
Instead we dig through auth events for memberships to present to
clients. The auth events of an event are guaranteed to contain a
passable membership event, otherwise the event would have been rejected.
Note that this only covers the common code paths encountered during
testing. There has been no exhaustive checking of all sync code paths.
Fixes#13146.
Signed-off-by: Sean Quah <seanq@matrix.org>
Broke by #13522
It looks like we have some rules in the DB with a priority class less
than 0 that don't override the base rules. Before these were just
dropped, but #13522 made that a hard error.
This improves load times for push rules:
| Version | Time per user | Time for 1k users |
| -------------------- | ------------- | ----------------- |
| Before | 138 µs | 138ms |
| Now (with custom) | 2.11 µs | 2.11ms |
| Now (without custom) | 49.7 ns | 0.05 ms |
This therefore has a large impact on send times for rooms
with large numbers of local users in the room.
This reverts commit f383b9b3ec. Other PRs
were seeing mypy failures that looked to be related to mypy-zope.
Confusingly, we didn't see this on #13521.
Revert this for now and investigate later.
* Clarifies comments.
* Fixes an erroneous comment (about return type) added in #13455
(ec24813220).
* Clarifies the name of a variable.
* Simplifies logic of pulling out the latest join for the requesting user.
Add some miscellaneous comments to document sync, especially around
`compute_state_delta`.
Signed-off-by: Sean Quah <seanq@matrix.org>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
```py
@trace
@tag_args
async def get_oldest_event_ids_with_depth_in_room(...)
...
```
Before this PR, you would see a warning in the logs and the span was not exported:
```
2022-08-03 19:11:59,383 - synapse.logging.opentracing - 835 - ERROR - GET-0 - @trace may not have wrapped EventFederationWorkerStore.get_oldest_event_ids_with_depth_in_room correctly! The function is not async but returned a coroutine.
```
In state res v2, we apply two passes of iterative auth checks. The first
pass replays power events and events in their auth chains, but only
those belonging to the full conflicted set. The source code as written
suggests that we want only those belonging to the auth difference (which
is a smaller set of events).
At runtime we were doing the correct thing anyway, because the only
callsite of `_reverse_topological_power_sort` passes in the
`full_conflicted_set`. So this really is just a rename.
This adds support for the stable identifiers of MSC2285 while
continuing to support the unstable identifiers behind the configuration
flag. These will be removed in a future version.
Fix @tag_args being off-by-one (ahead)
Example:
```
argspec.args=[
'self',
'room_id'
]
args=(
<synapse.storage.databases.main.DataStore object at 0x10d0b8d00>,
'!HBehERstyQBxyJDLfR:my.synapse.server'
)
```
---
The previous logic was also flawed and we can end up in a situation like this:
```
argspec.args=['self', 'dest', 'room_id', 'limit', 'extremities']
args=(<synapse.federation.federation_client.FederationClient object at 0x7f1651c18160>, 'hs1', '!jAEHKIubyIfuLOdfpY:hs1')
```
From this source:
```py
async def backfill(
self, dest: str, room_id: str, limit: int, extremities: Collection[str]
) -> Optional[List[EventBase]]:
```
And this usage:
```py
events = await self._federation_client.backfill(
dest, room_id, limit=limit, extremities=extremities
)
```
which would previously cause this error:
```
synapse_main | 2022-08-04 06:13:12,051 - synapse.handlers.federation - 424 - ERROR - GET-5 - Failed to backfill from hs1 because tuple index out of range
synapse_main | Traceback (most recent call last):
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/handlers/federation.py", line 392, in try_backfill
synapse_main | await self._federation_event_handler.backfill(
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/logging/tracing.py", line 828, in _wrapper
synapse_main | return await func(*args, **kwargs)
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/handlers/federation_event.py", line 593, in backfill
synapse_main | events = await self._federation_client.backfill(
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/logging/tracing.py", line 828, in _wrapper
synapse_main | return await func(*args, **kwargs)
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/logging/tracing.py", line 827, in _wrapper
synapse_main | with wrapping_logic(func, *args, **kwargs):
synapse_main | File "/usr/local/lib/python3.9/contextlib.py", line 119, in __enter__
synapse_main | return next(self.gen)
synapse_main | File "/usr/local/lib/python3.9/site-packages/synapse/logging/tracing.py", line 922, in _wrapping_logic
synapse_main | set_attribute("ARG_" + arg, str(args[i + 1])) # type: ignore[index]
synapse_main | IndexError: tuple index out of range
```
* Adds docstrings and inline comments.
* Formats SQL queries using triple quoted strings.
* Minor formatting changes.
* Avoid fetching `event_push_summary_stream_ordering` multiple times
in the same transactions.
Still maintains local in memory lookup optimisation, but does any external
lookup as part of the deferred that prevents duplicate lookups for the same
event at once. This makes the assumption that fetching from an external
cache is a non-zero load operation.
Signed-off-by: Andrew Doh <andrewddo@gmail.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Andrew Morgan <andrewm@element.io>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
Previously, `_resolve_state_at_missing_prevs` returned the resolved
state before an event and a partial state flag. These were unwieldy to
carry around would only ever be used to build an event context. Build
the event context directly instead.
Signed-off-by: Sean Quah <seanq@matrix.org>
==============================
This RC reintroduces support for `account_threepid_delegates.email`, which was removed in 1.64.0rc1. It remains deprecated and will be removed altogether in a future release. ([\#13406](https://github.com/matrix-org/synapse/issues/13406))
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEv27Axt/F4vrTL/8QOSor00I9eP8FAmLj4a8ACgkQOSor00I9
eP8biQf/c8yY2mbeRZcBKtp6yoQCRYQvboSMEXyi+dLe1hNqdhSZwRQcAoFuAFwE
WdScDvoTaElUxv0v6eCI1x9CoXnZ6xpDShvK39j5Yhzv+1tNsm5Uq9imyG3jK5i6
U/3Gt6CrCsS01VkGslQ3B5I6MFtbC6ZZK9O48yg+GD8Oqw2HH/gllr5swyVbKdbc
GGhRBHvgXn+w6d/KnKt8uRxJqIpDt9JMga+WdB8CwFR5WnWbGdw24KsyxmBuOLC3
caQRiluJL/X4jApUpfsJMBBd/jrDod5wWDFO/4P+v0+2d3Ts+hKezZbt5h1VIYSw
szZXbzxn5RNDkNiJDpOOOMYQ5DXGmA==
=3/nK
-----END PGP SIGNATURE-----
Merge tag 'v1.64.0rc2' into develop
Synapse 1.64.0rc2 (2022-07-29)
==============================
This RC reintroduces support for `account_threepid_delegates.email`, which was removed in 1.64.0rc1. It remains deprecated and will be removed altogether in a future release. ([\#13406](https://github.com/matrix-org/synapse/issues/13406))
The `room_id` field represented the parent space for each room
and was made redundant by changes in the API shape where the
`children_state` is now nested underneath each `room`.
The room ID of each child is in the `state_key` field and is still
available.
Avoid blocking on full state in `_resolve_state_at_missing_prevs` and
return a new flag indicating whether the resolved state is partial.
Thread that flag around so that it makes it into the event context.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
When registering a new account via SSO on iOS, the text field becomes pretty annoying as it autocapitalises and autocorrects your input. This PR fixes that (although I have only tested the raw HTML file on the simulator, I'm not sure how to get the complete setup available for testing in the flow).
Previously, TLS could only be used with STARTTLS.
Add a new option `force_tls`, where TLS is used from the start.
Implicit TLS is recommended over STARTLS,
see https://datatracker.ietf.org/doc/html/rfc8314Fixes#8046.
Signed-off-by: Jan Schär <jan@jschaer.ch>
See #10826 and #10786 for context as to why we had to disable pruning on
those caches.
Now that `get_users_who_share_room_with_user` is called frequently only
for presence, we just need to make calls to it less frequent and then we
can remove the various levels of caching that is going on.
When a room has the partial state flag, we may not have an accurate
`m.room.member` event for event senders in the room's current state, and
so cannot perform soft fail checks correctly. Skip the soft fail check
entirely in this case.
As an alternative, we could block until we have full state, but that
would prevent us from receiving incoming events over federation, which
is undesirable.
Signed-off-by: Sean Quah <seanq@matrix.org>
