Again in preparation for handling more than one OIDC provider, add a new caveat to the macaroon used as an OIDC session cookie, which remembers which OIDC provider we are talking to. In future, when we get a callback, we'll need it to make sure we talk to the right IdP.
As part of this, I'm adding an idp_id and idp_name field to the OIDC configuration object. They aren't yet documented, and we'll just use the old values by default.
If a user tries to do UI Auth via SSO, but uses the wrong account on the SSO
IdP, try to give them a better error.
Previously, the UIA would claim to be successful, but then the operation in
question would simply fail with "auth fail". Instead, serve up an error page
which explains the failure.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
This converts a few more of our inline HTML templates to Jinja. This is somewhat part of #7280 and should make it a bit easier to customize these in the future.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
#8037 changed the default `autoescape` option when rendering Jinja2 templates from `False` to `True`. This caused some bugs, noticeably around redirect URLs being escaped in SAML2 auth confirmation templates, causing those URLs to break for users.
This change returns the previous behaviour as it stood. We may want to look at each template individually and see whether autoescaping is a good idea at some point, but for now lets just fix the breakage.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
This is *not* ready for production yet. Caveats:
1. We should write some tests...
2. The stream token that we use for events can get stalled at the minimum position of all writers. This means that new events may not be processed and e.g. sent down sync streams if a writer isn't writing or is slow.
We do this to prevent foot guns. The default config uses a MemoryFilter,
but users are free to change to logging to files directly. If they do
then they have to ensure to set the `filters: [context]` on the right
handler, otherwise records get written with the wrong context.
Instead we move the logic to happen when we generate a record, which is
when we *log* rather than *handle*.
(It's possible to add filters to loggers in the config, however they
don't apply to descendant loggers and so they have to be manually set on
*every* logger used in the code base)
* Change default log config to buffer by default.
This batches up writes to the filesystem, which is more efficient for
disk I/O. This means that it can take some time for logs to get written
to disk. Note that ERROR logs (and above) immediately flush the buffer.
This only effects new installs, as we only write the log config if
started with `--generate-config` (in the same way we do for generating
signing keys).
* Default to keeping last 4 days of logs.
This hopefully reduces the amount of logs kept for new servers. Keeping
the last 1GB of logs is likely overkill for new servers, but equally may
not be enough for busy ones.
Instead, we keep the last four days worth of logs, enough so that admins
can investigate any problems that happened over e.g. a long weekend.
The [postgres setup docs](https://github.com/matrix-org/synapse/blob/develop/docs/postgres.md#set-up-database) recommend setting up your database with user `synapse_user`.
However, uncommenting the postgres defaults in the sample config leave you with user `synapse`.
This PR switches the sample config to recommend `synapse_user`. Took a me a second to figure this out, so assume this will beneficial to others.
The CI appears to use the latest version of isort, which is a problem when isort gets a major version bump. Rather than try to pin the version, I've done the necessary to make isort5 happy with synapse.
This requires a new config option to specify which media repo should be
responsible for running background jobs to e.g. clear out expired URL
preview caches.
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
Fixes https://github.com/matrix-org/synapse/issues/2431
Adds config option `encryption_enabled_by_default_for_room_type`, which determines whether encryption should be enabled with the default encryption algorithm in private or public rooms upon creation. Whether the room is private or public is decided based upon the room creation preset that is used.
Part of this PR is also pulling out all of the individual instances of `m.megolm.v1.aes-sha2` into a constant variable to eliminate typos ala https://github.com/matrix-org/synapse/pull/7637
Based on #7637
While working on https://github.com/matrix-org/synapse/issues/5665 I found myself digging into the `Ratelimiter` class and seeing that it was both:
* Rather undocumented, and
* causing a *lot* of config checks
This PR attempts to refactor and comment the `Ratelimiter` class, as well as encourage config file accesses to only be done at instantiation.
Best to be reviewed commit-by-commit.
* Expose `return_html_error`, and allow it to take a Jinja2 template instead of a raw string
* Clean up exception handling in SAML2ResponseResource
* use the existing code in `return_html_error` instead of re-implementing it
(giving it a jinja2 template rather than inventing a new form of template)
* do the exception-catching in the REST layer rather than in the handler
layer, to make sure we catch all exceptions.
'client_auth_method' commented out value was erronously 'client_auth_basic',
when code and docstring says it should be 'client_secret_basic'.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
* release-v1.13.0:
Don't UPGRADE database rows
RST indenting
Put rollback instructions in upgrade notes
Fix changelog typo
Oh yeah, RST
Absolute URL it is then
Fix upgrade notes link
Provide summary of upgrade issues in changelog. Fix )
Move next version notes from changelog to upgrade notes
Changelog fixes
1.13.0rc1
Documentation on setting up redis (#7446)
Rework UI Auth session validation for registration (#7455)
Fix errors from malformed log line (#7454)
Drop support for redis.dbid (#7450)
If the admin adds a `.yaml` file that's either empty or doesn't parse into a dict to a config directory (e.g. `conf.d` for debs installs), stuff like https://github.com/matrix-org/synapse/issues/7322 would happen. This PR checks that the file is correctly parsed into a dict, or ignores it with a warning if it parses into any other type (including `None` for empty files).
Fixes https://github.com/matrix-org/synapse/issues/7322
I don't really remember why this was so complicated; I think it dates
back to the time when we had to instantiate the Config classes before
we could call `add_arguments` - ie before #5597. In any case, I don't
think there's a good reason for it any more, and the impact of it
being complicated is that `--help` doesn't work correctly.
That fallback sets the redirect URL to itself (so it can process the login
token then return gracefully to the client). This would make it pointless to
ask the user for confirmation, since the URL the confirmation page would be
showing wouldn't be the client's.
If an error happened while processing a SAML AuthN response, or a client
ends up doing a `GET` request to `/authn_response`, then render a
customisable error page rather than a confusing error.
* Give `notif_template_html`, `notif_template_text` default values (fixes#6960)
* Don't complain if `smtp_host` and `smtp_port` are unset, since they have sensible defaults (fixes#6961)
* Set the example for `enable_notifs` to `True`, for consistency and because it's more useful
* Raise errors as ConfigError rather than RuntimeError for nicer formatting
Turns out that figuring out a remote user id for the SAML user isn't quite as obvious as it seems. Factor it out to the SamlMappingProvider so that it's easy to control.
Generally try to make this more comprehensible, and make it match the
conventions.
I've removed the documentation for all the settings which allow you to change
the names of the template files, because I can't really see why they are
useful.
Implement part [MSC2228](https://github.com/matrix-org/matrix-doc/pull/2228). The parts that differ are:
* the feature is hidden behind a configuration flag (`enable_ephemeral_messages`)
* self-destruction doesn't happen for state events
* only implement support for the `m.self_destruct_after` field (not the `m.self_destruct` one)
* doesn't send synthetic redactions to clients because for this specific case we consider the clients to be able to destroy an event themselves, instead we just censor it (by pruning its JSON) in the database
