Debian packaging via dh_virtualenv

This commit is contained in:
Richard van der Hoff 2018-12-20 11:35:23 +00:00
commit d3c9c562c6
41 changed files with 2481 additions and 2 deletions

View File

@ -5,3 +5,5 @@ demo/etc
tox.ini
.git/*
.tox/*
debian/matrix-synapse/
debian/matrix-synapse-*/

8
.gitignore vendored
View File

@ -18,7 +18,7 @@ homeserver*.db
homeserver*.log
homeserver*.log.*
homeserver*.pid
homeserver*.yaml
/homeserver*.yaml
*.signing.key
*.tls.crt
@ -26,6 +26,8 @@ homeserver*.yaml
*.tls.key
.coverage
.coverage.*
!.coverage.rc
htmlcov
demo/*/*.db
@ -57,3 +59,7 @@ env/
.vscode/
.ropeproject/
*.deb
/debs

View File

@ -36,6 +36,7 @@ prune demo/etc
prune docker
prune .circleci
prune .coveragerc
prune debian
exclude jenkins*
recursive-exclude jenkins *.sh

1
changelog.d/4212.misc Normal file
View File

@ -0,0 +1 @@
Debian packages utilising a virtualenv with bundled dependencies can now be built.

7
debian/.gitignore vendored Normal file
View File

@ -0,0 +1,7 @@
/matrix-synapse-py3.*.debhelper
/matrix-synapse-py3.debhelper.log
/matrix-synapse-py3.substvars
/matrix-synapse-*/
/files
/debhelper-build-stamp
/.debhelper

22
debian/NEWS vendored Normal file
View File

@ -0,0 +1,22 @@
matrix-synapse-py3 (0.34.0) stable; urgency=medium
matrix-synapse-py3 is intended as a drop-in replacement for the existing
matrix-synapse package. The replacement should be relatively seamless,
however, please note the following important differences to matrix-synapse:
* Most importantly, the matrix-synapse service now runs under Python 3 rather
than Python 2.7.
* Synapse is installed into its own virtualenv (in /opt/venvs/matrix-synapse)
instead of using the system python libraries. (This may mean that you can
remove a number of old dependencies with `apt-get autoremove`).
matrix-synapse-py3 will take over responsibility for the existing
configuration files, including the matrix-synapse systemd service.
Beware, however, that `apt-get purge matrix-synapse` will *disable* the
matrix-synapse service (so that it will not be started on reboot), even
though that service is no longer being provided by the matrix-synapse
package. It can be re-enabled with `systemctl enable matrix-synapse`.
-- Richard van der Hoff <richard@matrix.org> Wed, 19 Dec 2018 14:00:00 +0000

48
debian/build_virtualenv vendored Executable file
View File

@ -0,0 +1,48 @@
#!/bin/bash
#
# runs dh_virtualenv to build the virtualenv in the build directory,
# and then runs the trial tests against the installed synapse.
set -e
export DH_VIRTUALENV_INSTALL_ROOT=/opt/venvs
SNAKE=/usr/bin/python3
# try to set the CFLAGS so any compiled C extensions are compiled with the most
# generic as possible x64 instructions, so that compiling it on a new Intel chip
# doesn't enable features not available on older ones or AMD.
#
# TODO: add similar things for non-amd64, or figure out a more generic way to
# do this.
case `dpkg-architecture -q DEB_HOST_ARCH` in
amd64)
export CFLAGS=-march=x86-64
;;
esac
# Use --builtin-venv to use the better `venv` module from CPython 3.4+ rather
# than the 2/3 compatible `virtualenv`.
dh_virtualenv \
--install-suffix "matrix-synapse" \
--builtin-venv \
--setuptools \
--python "$SNAKE" \
--upgrade-pip \
--preinstall="lxml" \
--preinstall="mock" \
--extra-pip-arg="--no-cache-dir" \
--extra-pip-arg="--compile"
# we copy the tests to a temporary directory so that we can put them on the
# PYTHONPATH without putting the uninstalled synapse on the pythonpath.
tmpdir=`mktemp -d`
trap "rm -r $tmpdir" EXIT
cp -r tests "$tmpdir"
cd debian/matrix-synapse-py3
PYTHONPATH="$tmpdir" \
./opt/venvs/matrix-synapse/bin/python \
-B -m twisted.trial --reporter=text -j2 tests

641
debian/changelog vendored Normal file
View File

@ -0,0 +1,641 @@
matrix-synapse-py3 (0.34.0) stable; urgency=medium
* New synapse release 0.34.0.
* Synapse is now installed into a Python 3 virtual environment with
up-to-date dependencies.
* The matrix-synapse service will now be restarted when the package is
upgraded.
(Fixes https://github.com/matrix-org/package-synapse-debian/issues/18)
-- Synapse packaging team <packages@matrix.org> Wed, 19 Dec 2018 14:00:00 +0000
matrix-synapse (0.33.9-1matrix1) stretch; urgency=medium
[ Erik Johnston ]
* Remove dependency on python-pydenticon
[ Richard van der Hoff ]
* New upstream version 0.33.9
* Refresh patches for 0.33.9
-- Richard van der Hoff <richard@matrix.org> Tue, 20 Nov 2018 10:26:05 +0000
matrix-synapse (0.33.8-1) stretch; urgency=medium
* New upstream version 0.33.8
-- Erik Johnston <erik@matrix.org> Thu, 01 Nov 2018 14:33:26 +0000
matrix-synapse (0.33.7-1matrix1) stretch; urgency=medium
* New upstream version 0.33.7
-- Richard van der Hoff <richard@matrix.org> Thu, 18 Oct 2018 16:18:26 +0100
matrix-synapse (0.33.6-1matrix1) stretch; urgency=medium
* Imported Upstream version 0.33.6
* Remove redundant explicit dep on python-bcrypt
* Run the tests during build
* Add dependency on python-attr 16.0
* Refresh patches for 0.33.6
-- Richard van der Hoff <richard@matrix.org> Thu, 04 Oct 2018 14:40:29 +0100
matrix-synapse (0.33.5.1-1matrix1) stretch; urgency=medium
* Imported Upstream version 0.33.5.1
-- Richard van der Hoff <richard@matrix.org> Mon, 24 Sep 2018 18:20:51 +0100
matrix-synapse (0.33.5-1matrix1) stretch; urgency=medium
* Imported Upstream version 0.33.5
-- Richard van der Hoff <richard@matrix.org> Mon, 24 Sep 2018 16:06:23 +0100
matrix-synapse (0.33.4-1mx1) stretch; urgency=medium
* Imported Upstream version 0.33.4
* Avoid telling people to install packages with pip
(fixes https://github.com/matrix-org/synapse/issues/3743)
-- Richard van der Hoff <richard@matrix.org> Fri, 07 Sep 2018 14:06:17 +0100
matrix-synapse (0.33.3.1-1mx1) stretch; urgency=critical
[ Richard van der Hoff ]
* Imported Upstream version 0.33.3.1
-- Richard van der Hoff <richard@matrix.org> Thu, 06 Sep 2018 11:20:37 +0100
matrix-synapse (0.33.3-2) stretch; urgency=medium
* We now require python-twisted 17.1.0 or later
* Add recommendations for python-psycopg2 and python-lxml
-- Richard van der Hoff <richard@matrix.org> Thu, 23 Aug 2018 19:04:08 +0100
matrix-synapse (0.33.3-1) jessie; urgency=medium
* New upstream version 0.33.3
-- Richard van der Hoff <richard@matrix.org> Wed, 22 Aug 2018 14:50:30 +0100
matrix-synapse (0.33.2-1) jessie; urgency=medium
* New upstream version 0.33.2
-- Richard van der Hoff <richard@matrix.org> Thu, 09 Aug 2018 15:40:42 +0100
matrix-synapse (0.33.1-1) jessie; urgency=medium
* New upstream version 0.33.1
-- Erik Johnston <erik@matrix.org> Thu, 02 Aug 2018 15:52:19 +0100
matrix-synapse (0.33.0-1) jessie; urgency=medium
* New upstream version 0.33.0
-- Richard van der Hoff <richard@matrix.org> Thu, 19 Jul 2018 13:38:41 +0100
matrix-synapse (0.32.1-1) jessie; urgency=medium
* New upstream version 0.32.1
-- Richard van der Hoff <richard@matrix.org> Fri, 06 Jul 2018 17:16:29 +0100
matrix-synapse (0.32.0-1) jessie; urgency=medium
* New upstream version 0.32.0
-- Erik Johnston <erik@matrix.org> Fri, 06 Jul 2018 15:34:06 +0100
matrix-synapse (0.31.2-1) jessie; urgency=high
* New upstream version 0.31.2
-- Richard van der Hoff <richard@matrix.org> Thu, 14 Jun 2018 16:49:07 +0100
matrix-synapse (0.31.1-1) jessie; urgency=medium
* New upstream version 0.31.1
* Require python-prometheus-client >= 0.0.14
-- Richard van der Hoff <richard@matrix.org> Fri, 08 Jun 2018 16:11:55 +0100
matrix-synapse (0.31.0-1) jessie; urgency=medium
* New upstream version 0.31.0
-- Richard van der Hoff <richard@matrix.org> Wed, 06 Jun 2018 17:23:10 +0100
matrix-synapse (0.30.0-1) jessie; urgency=medium
[ Michael Kaye ]
* update homeserver.yaml to be somewhat more modern.
[ Erik Johnston ]
* New upstream version 0.30.0
-- Erik Johnston <erik@matrix.org> Thu, 24 May 2018 16:43:16 +0100
matrix-synapse (0.29.0-1) jessie; urgency=medium
* New upstream version 0.29.0
-- Erik Johnston <erik@matrix.org> Wed, 16 May 2018 17:43:06 +0100
matrix-synapse (0.28.1-1) jessie; urgency=medium
* New upstream version 0.28.1
-- Erik Johnston <erik@matrix.org> Tue, 01 May 2018 19:21:39 +0100
matrix-synapse (0.28.0-1) jessie; urgency=medium
* New upstream 0.28.0
-- Erik Johnston <erik@matrix.org> Fri, 27 Apr 2018 13:15:49 +0100
matrix-synapse (0.27.4-1) jessie; urgency=medium
* Bump canonicaljson version
* New upstream 0.27.4
-- Erik Johnston <erik@matrix.org> Fri, 13 Apr 2018 13:37:47 +0100
matrix-synapse (0.27.3-1) jessie; urgency=medium
* Report stats should default to off
* Refresh patches
* New upstream 0.27.3
-- Erik Johnston <erik@matrix.org> Wed, 11 Apr 2018 11:43:47 +0100
matrix-synapse (0.27.2-1) jessie; urgency=medium
* New upstream version 0.27.2
-- Erik Johnston <erik@matrix.org> Mon, 26 Mar 2018 16:41:57 +0100
matrix-synapse (0.27.1-1) jessie; urgency=medium
* New upstream version 0.27.1
-- Erik Johnston <erik@matrix.org> Mon, 26 Mar 2018 16:22:03 +0100
matrix-synapse (0.27.0-2) jessie; urgency=medium
* Fix bcrypt dependency
-- Erik Johnston <erik@matrix.org> Mon, 26 Mar 2018 16:00:26 +0100
matrix-synapse (0.27.0-1) jessie; urgency=medium
* New upstream version 0.27.0
-- Erik Johnston <erik@matrix.org> Mon, 26 Mar 2018 15:07:52 +0100
matrix-synapse (0.26.1-1) jessie; urgency=medium
* Ignore RC
* New upstream version 0.26.1
-- Erik Johnston <erik@matrix.org> Fri, 16 Mar 2018 00:40:08 +0000
matrix-synapse (0.26.0-1) jessie; urgency=medium
[ Richard van der Hoff ]
* Remove `level` for `file` log handler
[ Erik Johnston ]
-- Erik Johnston <erik@matrix.org> Fri, 05 Jan 2018 11:21:26 +0000
matrix-synapse (0.25.1-1) jessie; urgency=medium
* New upstream version 0.25.1
-- Erik Johnston <erik@matrix.org> Mon, 20 Nov 2017 10:05:37 +0000
matrix-synapse (0.25.0-1) jessie; urgency=medium
* New upstream version 0.25.0
-- Erik Johnston <erik@matrix.org> Wed, 15 Nov 2017 11:36:32 +0000
matrix-synapse (0.24.1-1) jessie; urgency=medium
* New upstream version 0.24.1
-- Erik Johnston <erik@matrix.org> Tue, 24 Oct 2017 15:05:03 +0100
matrix-synapse (0.24.0-1) jessie; urgency=medium
* New upstream version 0.24.0
-- Erik Johnston <erik@matrix.org> Mon, 23 Oct 2017 14:11:46 +0100
matrix-synapse (0.23.1-1) xenial; urgency=medium
* Imported upstream version 0.23.1
-- Erik Johnston <erikj@matrix.org> Thu, 05 Oct 2017 15:28:25 +0100
matrix-synapse (0.23.0-1) jessie; urgency=medium
* Fix patch after refactor
* Add patch to remove requirement on affinity package
* refresh webclient patch
-- Erik Johnston <erikj@matrix.org> Mon, 02 Oct 2017 15:34:57 +0100
matrix-synapse (0.22.1-1) jessie; urgency=medium
* Imported Upstream version 0.22.1
-- Erik Johnston <erikj@matrix.org> Thu, 06 Jul 2017 18:14:13 +0100
matrix-synapse (0.22.0-1) jessie; urgency=medium
* Imported upstream version 0.22.0
-- Erik Johnston <erikj@matrix.org> Thu, 06 Jul 2017 10:47:45 +0100
matrix-synapse (0.21.1-1) jessie; urgency=medium
* Imported upstream version 0.21.1
-- Erik Johnston <erikj@matrix.org> Thu, 15 Jun 2017 13:31:13 +0100
matrix-synapse (0.21.0-1) jessie; urgency=medium
* Imported upstream version 0.21.0
* Update patches
-- Erik Johnston <erikj@matrix.org> Thu, 18 May 2017 14:16:54 +0100
matrix-synapse (0.20.0-2) jessie; urgency=medium
* Depend on python-jsonschema
-- Erik Johnston <erikj@matrix.org> Wed, 12 Apr 2017 10:41:46 +0100
matrix-synapse (0.20.0-1) jessie; urgency=medium
* Imported upstream version 0.20.0
-- Erik Johnston <erikj@matrix.org> Tue, 11 Apr 2017 12:58:26 +0100
matrix-synapse (0.19.3-1) jessie; urgency=medium
* Imported upstream version 0.19.3
-- Erik Johnston <erikj@matrix.org> Tue, 21 Mar 2017 13:45:41 +0000
matrix-synapse (0.19.2-1) jessie; urgency=medium
[ Sunil Mohan Adapa ]
* Bump standards version to 3.9.8
* Add debian/copyright file
* Don't ignore errors in debian/config
* Reformat depenedencies in debian/control
* Internationalize strings in template file
* Update package description
* Add lsb-base as dependency
* Update questions for debconf style
* Add man pages for all binaries
[ Erik Johnston ]
* Imported upstream version 0.19.2
-- Erik Johnston <erikj@matrix.org> Tue, 21 Feb 2017 13:55:00 +0000
matrix-synapse (0.19.1-1) jessie; urgency=medium
* Imported upstream version 0.19.1
-- Erik Johnston <erikj@matrix.org> Thu, 09 Feb 2017 11:53:27 +0000
matrix-synapse (0.19.0-1) jessie; urgency=medium
This build requires python-twisted 0.19.0, which may need to be installed
from backports.
[ Bryce Chidester ]
* Add EnvironmentFile to the systemd service
* Create matrix-synapse.default
[ Erik Johnston ]
* Imported upstream version 0.19.0
-- Erik Johnston <erikj@matrix.org> Sat, 04 Feb 2017 09:58:29 +0000
matrix-synapse (0.18.7-1) trusty; urgency=medium
* Imported Upstream version 0.18.4
-- Erik Johnston <erikj@matrix.org> Mon, 09 Jan 2017 15:10:21 +0000
matrix-synapse (0.18.5-1) trusty; urgency=medium
* Imported Upstream version 0.18.5
-- Erik Johnston <erikj@matrix.org> Fri, 16 Dec 2016 10:51:59 +0000
matrix-synapse (0.18.4-1) trusty; urgency=medium
* Imported Upstream version 0.18.4
-- Erik Johnston <erikj@matrix.org> Tue, 22 Nov 2016 10:33:41 +0000
matrix-synapse (0.18.3-1) trusty; urgency=medium
* Imported Upstream version 0.18.3
* Remove upstreamed ldap3 patch
-- Erik Johnston <erikj@matrix.org> Tue, 08 Nov 2016 15:01:49 +0000
matrix-synapse (0.18.2-2) trusty; urgency=high
* Patch ldap3 support to workaround differences in python-ldap3 0.9,
bug allowed unauthorized logins if ldap3 0.9 was used.
-- Erik Johnston <erikj@matrix.org> Tue, 08 Nov 2016 13:48:09 +0000
matrix-synapse (0.18.2-1) trusty; urgency=medium
* Imported Upstream version 0.18.2
-- Erik Johnston <erikj@matrix.org> Tue, 01 Nov 2016 13:30:45 +0000
matrix-synapse (0.18.1-1) trusty; urgency=medium
* Imported Upstream version 0.18.1
-- Erik Johnston <erikj@matrix.org> Wed, 05 Oct 2016 14:52:53 +0100
matrix-synapse (0.18.0-1) trusty; urgency=medium
* Imported Upstream version 0.18.0
-- Erik Johnston <erikj@matrix.org> Mon, 19 Sep 2016 17:38:48 +0100
matrix-synapse (0.17.3-1) trusty; urgency=medium
* Imported Upstream version 0.17.3
-- Erik Johnston <erikj@matrix.org> Fri, 09 Sep 2016 11:18:18 +0100
matrix-synapse (0.17.2-1) trusty; urgency=medium
* Imported Upstream version 0.17.2
-- Erik Johnston <erikj@matrix.org> Thu, 08 Sep 2016 15:37:14 +0100
matrix-synapse (0.17.1-1) trusty; urgency=medium
* Imported Upstream version 0.17.1
-- Erik Johnston <erikj@matrix.org> Wed, 24 Aug 2016 15:11:29 +0100
matrix-synapse (0.17.0-1) trusty; urgency=medium
* Imported Upstream version 0.17.0
-- Erik Johnston <erikj@matrix.org> Mon, 08 Aug 2016 13:56:15 +0100
matrix-synapse (0.16.1-r1-1) trusty; urgency=medium
* Imported Upstream version 0.16.1-r1
-- Erik Johnston <erikj@matrix.org> Fri, 08 Jul 2016 16:47:35 +0100
matrix-synapse (0.16.1-2) trusty; urgency=critical
* Apply security patch
-- Erik Johnston <erikj@matrix.org> Fri, 08 Jul 2016 11:05:27 +0100
matrix-synapse (0.16.1-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Tue, 21 Jun 2016 14:56:48 +0100
matrix-synapse (0.16.0-3) trusty; urgency=medium
* Don't require strict nacl==0.3.0 requirement
-- Erik Johnston <erikj@matrix.org> Mon, 20 Jun 2016 13:24:22 +0100
matrix-synapse (0.16.0-2) trusty; urgency=medium
* Also change the permissions of /etc/matrix-synapse
* Add apt webclient instructions
* Fix up patches
* Update default homeserver.yaml
* Add patch
-- Erik Johnston <erikj@matrix.org> Fri, 10 Jun 2016 14:06:20 +0100
matrix-synapse (0.16.0-1) trusty; urgency=medium
[ David A Roberts ]
* systemd
[ Erik Johnston ]
* Fixup postinst and matrix-synapse.service
* Handle email optional deps
* New upstream release
-- Erik Johnston <erikj@matrix.org> Thu, 09 Jun 2016 16:17:01 +0100
matrix-synapse (0.14.0-1) trusty; urgency=medium
* Remove saml2 module requirements
-- Erik Johnston <erikj@matrix.org> Wed, 30 Mar 2016 14:31:17 +0100
matrix-synapse (0.13.3-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Thu, 11 Feb 2016 16:35:39 +0000
matrix-synapse (0.13.2-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Thu, 11 Feb 2016 11:01:16 +0000
matrix-synapse (0.13.0-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Wed, 10 Feb 2016 16:34:39 +0000
matrix-synapse (0.12.0-2) trusty; urgency=medium
* Don't default `registerion_shared_secret` config option
-- Erik Johnston <erikj@matrix.org> Wed, 06 Jan 2016 16:34:02 +0000
matrix-synapse (0.12.0-1) stable; urgency=medium
* Imported Upstream version 0.12.0
-- Mark Haines <mark@matrix.org> Mon, 04 Jan 2016 15:38:33 +0000
matrix-synapse (0.11.1-1) unstable; urgency=medium
* Imported Upstream version 0.11.1
-- Erik Johnston <erikj@matrix.org> Fri, 20 Nov 2015 17:56:52 +0000
matrix-synapse (0.11.0-r2-1) stable; urgency=medium
* Imported Upstream version 0.11.0-r2
* Add gbp.conf
-- Erik Johnston <erikj@matrix.org> Thu, 19 Nov 2015 13:52:36 +0000
matrix-synapse (0.11.0-1) wheezy; urgency=medium
* Fix dependencies.
-- Erik Johnston <erikj@matrix.org> Tue, 17 Nov 2015 16:28:06 +0000
matrix-synapse (0.11.0-0) wheezy; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Tue, 17 Nov 2015 16:03:01 +0000
matrix-synapse (0.10.0-2) wheezy; urgency=medium
* Rebuild for wheezy.
-- Erik Johnston <erikj@matrix.org> Fri, 04 Sep 2015 14:21:03 +0100
matrix-synapse (0.10.0-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Thu, 03 Sep 2015 10:08:34 +0100
matrix-synapse (0.10.0~rc6-3) trusty; urgency=medium
* Create log directory.
-- Erik Johnston <erikj@matrix.org> Wed, 02 Sep 2015 17:49:07 +0100
matrix-synapse (0.10.0~rc6-2) trusty; urgency=medium
* Add patch to work around upstream bug in config directory handling.
-- Erik Johnston <erikj@matrix.org> Wed, 02 Sep 2015 17:42:42 +0100
matrix-synapse (0.10.0~rc6-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Wed, 02 Sep 2015 17:21:21 +0100
matrix-synapse (0.10.0~rc5-3) trusty; urgency=medium
* Update init script to work.
-- Erik Johnston <erikj@matrix.org> Fri, 28 Aug 2015 10:51:56 +0100
matrix-synapse (0.10.0~rc5-2) trusty; urgency=medium
* Fix where python files are installed.
-- Erik Johnston <erikj@matrix.org> Thu, 27 Aug 2015 11:55:39 +0100
matrix-synapse (0.10.0~rc5-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Thu, 27 Aug 2015 11:26:54 +0100
matrix-synapse (0.10.0~rc4-1) trusty; urgency=medium
* New upstream version.
-- Erik Johnston <erikj@matrix.org> Thu, 27 Aug 2015 10:29:31 +0100
matrix-synapse (0.10.0~rc3-7) trusty; urgency=medium
* Add debian/watch
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 17:57:08 +0100
matrix-synapse (0.10.0~rc3-6) trusty; urgency=medium
* Deps.
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 17:07:13 +0100
matrix-synapse (0.10.0~rc3-5) trusty; urgency=medium
* Deps.
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 16:18:02 +0100
matrix-synapse (0.10.0~rc3-4) trusty; urgency=medium
* More deps.
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 14:09:27 +0100
matrix-synapse (0.10.0~rc3-3) trusty; urgency=medium
* Update deps.
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 13:49:20 +0100
matrix-synapse (0.10.0~rc3-2) trusty; urgency=medium
* Add more deps.
-- Erik Johnston <erikj@matrix.org> Wed, 26 Aug 2015 13:25:45 +0100
matrix-synapse (0.10.0~rc3-1) trusty; urgency=medium
* New upstream release
-- Erik Johnston <erikj@matrix.org> Tue, 25 Aug 2015 17:52:33 +0100
matrix-synapse (0.9.3-1~trusty1) trusty; urgency=medium
* Rebuild for trusty.
-- Erik Johnston <erikj@matrix.org> Thu, 20 Aug 2015 15:05:43 +0100
matrix-synapse (0.9.3-1) wheezy; urgency=medium
* New upstream release
* Create a user, "matrix-synapse", to run as
* Log to /var/log/matrix-synapse/ directory
* Override the way synapse looks for the angular SDK (syweb) so it finds the
packaged one
-- Paul "LeoNerd" Evans <paul@matrix.org> Fri, 07 Aug 2015 15:32:12 +0100
matrix-synapse (0.9.2-2) wheezy; urgency=medium
* Supply a default config file
* Create directory in /var/lib
* Use debconf to ask the user for the server name at installation time
-- Paul "LeoNerd" Evans <paul@matrix.org> Thu, 06 Aug 2015 15:28:00 +0100
matrix-synapse (0.9.2-1) wheezy; urgency=low
* source package automatically created by stdeb 0.8.2
-- Paul "LeoNerd" Evans <paul@matrix.org> Fri, 12 Jun 2015 14:32:03 +0100

1
debian/compat vendored Normal file
View File

@ -0,0 +1 @@
9

9
debian/config vendored Executable file
View File

@ -0,0 +1,9 @@
#!/bin/sh
set -e
. /usr/share/debconf/confmodule
db_input high matrix-synapse/server-name || true
db_input high matrix-synapse/report-stats || true
db_go

37
debian/control vendored Normal file
View File

@ -0,0 +1,37 @@
Source: matrix-synapse-py3
Section: contrib/python
Priority: extra
Maintainer: Synapse Packaging team <packages@matrix.org>
Build-Depends:
debhelper (>= 9),
dh-systemd,
dh-virtualenv (>= 1.0),
lsb-release,
python3-dev,
python3,
python3-setuptools,
python3-pip,
python3-venv,
tar,
Standards-Version: 3.9.5
Homepage: https://github.com/matrix-org/synapse
Package: matrix-synapse-py3
Architecture: amd64
Conflicts: matrix-synapse
Pre-Depends: dpkg (>= 1.16.1)
Depends:
adduser,
debconf,
python3-distutils|libpython3-stdlib (<< 3.6),
python3,
${misc:Depends},
# some of our scripts use perl, but none of them are important,
# so we put perl:Depends in Suggests rather than Depends.
Suggests:
sqlite3,
${perl:Depends},
Description: Open federated Instant Messaging and VoIP server
Matrix is an ambitious new ecosystem for open federated Instant
Messaging and VoIP. Synapse is a reference Matrix server
implementation.

118
debian/copyright vendored Normal file
View File

@ -0,0 +1,118 @@
Format: http://www.debian.org/doc/packaging-manuals/copyright-format/1.0/
Upstream-Name: synapse
Source: https://github.com/matrix-org/synapse
Files: *
Copyright: 2014-2017, OpenMarket Ltd, 2017-2018 New Vector Ltd
License: Apache-2.0
Files: synapse/config/saml2.py
Copyright: 2015, Ericsson
License: Apache-2.0
Files: synapse/config/jwt.py
Copyright: 2015, Niklas Riekenbrauck
License: Apache-2.0
Files: synapse/config/workers.py
Copyright: 2016, matrix.org
License: Apache-2.0
Files: synapse/config/repository.py
Copyright: 2014-2015, matrix.org
License: Apache-2.0
Files: contrib/jitsimeetbridge/unjingle/strophe/base64.js
Copyright: Public Domain (Tyler Akins http://rumkin.com)
License: public-domain
This code was written by Tyler Akins and has been placed in the
public domain. It would be nice if you left this header intact.
Base64 code from Tyler Akins -- http://rumkin.com
Files: contrib/jitsimeetbridge/unjingle/strophe/md5.js
Copyright: 1999-2002, Paul Johnston & Contributors
License: BSD-3-clause
Files: contrib/jitsimeetbridge/unjingle/strophe/strophe.js
Copyright: 2006-2008, OGG, LLC
License: Expat
Files: contrib/jitsimeetbridge/unjingle/strophe/XMLHttpRequest.js
Copyright: 2010 passive.ly LLC
License: Expat
Files: contrib/jitsimeetbridge/unjingle/*.js
Copyright: 2014 Jitsi
License: Apache-2.0
Files: debian/*
Copyright: 2016-2017, Erik Johnston <erik@matrix.org>
2017, Rahul De <rahulde@swecha.net>
2017, Sunil Mohan Adapa <sunil@medhas.org>
License: Apache-2.0
License: Apache-2.0
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
.
http://www.apache.org/licenses/LICENSE-2.0
.
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
.
On Debian systems, the full text of the Apache License version
2.0 can be found in the file
`/usr/share/common-licenses/Apache-2.0'.
License: BSD-3-clause
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
.
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following
disclaimer. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided with
the distribution.
.
Neither the name of the author nor the names of its contributors may
be used to endorse or promote products derived from this software
without specific prior written permission.
.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
License: Expat
Permission is hereby granted, free of charge, to any person obtaining
a copy of this software and associated documentation files (the
"Software"), to deal in the Software without restriction, including
without limitation the rights to use, copy, modify, merge, publish,
distribute, sublicense, and/or sell copies of the Software, and to
permit persons to whom the Software is furnished to do so, subject to
the following conditions:
.
The above copyright notice and this permission notice shall be
included in all copies or substantial portions of the Software.
.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.

3
debian/dirs vendored Normal file
View File

@ -0,0 +1,3 @@
etc/matrix-synapse
var/lib/matrix-synapse
var/log/matrix-synapse

90
debian/hash_password.1 vendored Normal file
View File

@ -0,0 +1,90 @@
.\" generated with Ronn/v0.7.3
.\" http://github.com/rtomayko/ronn/tree/0.7.3
.
.TH "HASH_PASSWORD" "1" "February 2017" "" ""
.
.SH "NAME"
\fBhash_password\fR \- Calculate the hash of a new password, so that passwords can be reset
.
.SH "SYNOPSIS"
\fBhash_password\fR [\fB\-p\fR|\fB\-\-password\fR [password]] [\fB\-c\fR|\fB\-\-config\fR \fIfile\fR]
.
.SH "DESCRIPTION"
\fBhash_password\fR calculates the hash of a supplied password using bcrypt\.
.
.P
\fBhash_password\fR takes a password as an parameter either on the command line or the \fBSTDIN\fR if not supplied\.
.
.P
It accepts an YAML file which can be used to specify parameters like the number of rounds for bcrypt and password_config section having the pepper value used for the hashing\. By default \fBbcrypt_rounds\fR is set to \fB10\fR\.
.
.P
The hashed password is written on the \fBSTDOUT\fR\.
.
.SH "FILES"
A sample YAML file accepted by \fBhash_password\fR is described below:
.
.P
bcrypt_rounds: 17 password_config: pepper: "random hashing pepper"
.
.SH "OPTIONS"
.
.TP
\fB\-p\fR, \fB\-\-password\fR
Read the password form the command line if [password] is supplied\. If not, prompt the user and read the password form the \fBSTDIN\fR\. It is not recommended to type the password on the command line directly\. Use the STDIN instead\.
.
.TP
\fB\-c\fR, \fB\-\-config\fR
Read the supplied YAML \fIfile\fR containing the options \fBbcrypt_rounds\fR and the \fBpassword_config\fR section containing the \fBpepper\fR value\.
.
.SH "EXAMPLES"
Hash from the command line:
.
.IP "" 4
.
.nf
$ hash_password \-p "p@ssw0rd"
$2b$12$VJNqWQYfsWTEwcELfoSi4Oa8eA17movHqqi8\.X8fWFpum7SxZ9MFe
.
.fi
.
.IP "" 0
.
.P
Hash from the STDIN:
.
.IP "" 4
.
.nf
$ hash_password
Password:
Confirm password:
$2b$12$AszlvfmJl2esnyhmn8m/kuR2tdXgROWtWxnX\.rcuAbM8ErLoUhybG
.
.fi
.
.IP "" 0
.
.P
Using a config file:
.
.IP "" 4
.
.nf
$ hash_password \-c config\.yml
Password:
Confirm password:
$2b$12$CwI\.wBNr\.w3kmiUlV3T5s\.GT2wH7uebDCovDrCOh18dFedlANK99O
.
.fi
.
.IP "" 0
.
.SH "COPYRIGHT"
This man page was written by Rahul De <\fIrahulde@swecha\.net\fR> for Debian GNU/Linux distribution\.
.
.SH "SEE ALSO"
synctl(1), synapse_port_db(1), register_new_matrix_user(1)

69
debian/hash_password.ronn vendored Normal file
View File

@ -0,0 +1,69 @@
hash_password(1) -- Calculate the hash of a new password, so that passwords can be reset
========================================================================================
## SYNOPSIS
`hash_password` [`-p`|`--password` [password]] [`-c`|`--config` <file>]
## DESCRIPTION
**hash_password** calculates the hash of a supplied password using bcrypt.
`hash_password` takes a password as an parameter either on the command line
or the `STDIN` if not supplied.
It accepts an YAML file which can be used to specify parameters like the
number of rounds for bcrypt and password_config section having the pepper
value used for the hashing. By default `bcrypt_rounds` is set to **10**.
The hashed password is written on the `STDOUT`.
## FILES
A sample YAML file accepted by `hash_password` is described below:
bcrypt_rounds: 17
password_config:
pepper: "random hashing pepper"
## OPTIONS
* `-p`, `--password`:
Read the password form the command line if [password] is supplied.
If not, prompt the user and read the password form the `STDIN`.
It is not recommended to type the password on the command line
directly. Use the STDIN instead.
* `-c`, `--config`:
Read the supplied YAML <file> containing the options `bcrypt_rounds`
and the `password_config` section containing the `pepper` value.
## EXAMPLES
Hash from the command line:
$ hash_password -p "p@ssw0rd"
$2b$12$VJNqWQYfsWTEwcELfoSi4Oa8eA17movHqqi8.X8fWFpum7SxZ9MFe
Hash from the STDIN:
$ hash_password
Password:
Confirm password:
$2b$12$AszlvfmJl2esnyhmn8m/kuR2tdXgROWtWxnX.rcuAbM8ErLoUhybG
Using a config file:
$ hash_password -c config.yml
Password:
Confirm password:
$2b$12$CwI.wBNr.w3kmiUlV3T5s.GT2wH7uebDCovDrCOh18dFedlANK99O
## COPYRIGHT
This man page was written by Rahul De <<rahulde@swecha.net>>
for Debian GNU/Linux distribution.
## SEE ALSO
synctl(1), synapse_port_db(1), register_new_matrix_user(1)

617
debian/homeserver.yaml vendored Normal file
View File

@ -0,0 +1,617 @@
# vim:ft=yaml
# PEM encoded X509 certificate for TLS.
# You can replace the self-signed certificate that synapse
# autogenerates on launch with your own SSL certificate + key pair
# if you like. Any required intermediary certificates can be
# appended after the primary certificate in hierarchical order.
tls_certificate_path: "/etc/matrix-synapse/homeserver.tls.crt"
# PEM encoded private key for TLS
tls_private_key_path: "/etc/matrix-synapse/homeserver.tls.key"
# PEM dh parameters for ephemeral keys
tls_dh_params_path: "/etc/matrix-synapse/homeserver.tls.dh"
# Don't bind to the https port
no_tls: False
# List of allowed TLS fingerprints for this server to publish along
# with the signing keys for this server. Other matrix servers that
# make HTTPS requests to this server will check that the TLS
# certificates returned by this server match one of the fingerprints.
#
# Synapse automatically adds the fingerprint of its own certificate
# to the list. So if federation traffic is handled directly by synapse
# then no modification to the list is required.
#
# If synapse is run behind a load balancer that handles the TLS then it
# will be necessary to add the fingerprints of the certificates used by
# the loadbalancers to this list if they are different to the one
# synapse is using.
#
# Homeservers are permitted to cache the list of TLS fingerprints
# returned in the key responses up to the "valid_until_ts" returned in
# key. It may be necessary to publish the fingerprints of a new
# certificate and wait until the "valid_until_ts" of the previous key
# responses have passed before deploying it.
#
# You can calculate a fingerprint from a given TLS listener via:
# openssl s_client -connect $host:$port < /dev/null 2> /dev/null |
# openssl x509 -outform DER | openssl sha256 -binary | base64 | tr -d '='
# or by checking matrix.org/federationtester/api/report?server_name=$host
#
tls_fingerprints: []
# tls_fingerprints: [{"sha256": "<base64_encoded_sha256_fingerprint>"}]
## Server ##
# When running as a daemon, the file to store the pid in
pid_file: "/var/run/matrix-synapse.pid"
# CPU affinity mask. Setting this restricts the CPUs on which the
# process will be scheduled. It is represented as a bitmask, with the
# lowest order bit corresponding to the first logical CPU and the
# highest order bit corresponding to the last logical CPU. Not all CPUs
# may exist on a given system but a mask may specify more CPUs than are
# present.
#
# For example:
# 0x00000001 is processor #0,
# 0x00000003 is processors #0 and #1,
# 0xFFFFFFFF is all processors (#0 through #31).
#
# Pinning a Python process to a single CPU is desirable, because Python
# is inherently single-threaded due to the GIL, and can suffer a
# 30-40% slowdown due to cache blow-out and thread context switching
# if the scheduler happens to schedule the underlying threads across
# different cores. See
# https://www.mirantis.com/blog/improve-performance-python-programs-restricting-single-cpu/.
#
# cpu_affinity: 0xFFFFFFFF
# The path to the web client which will be served at /_matrix/client/
# if 'webclient' is configured under the 'listeners' configuration.
#
# web_client_location: "/path/to/web/root"
# The public-facing base URL for the client API (not including _matrix/...)
# public_baseurl: https://example.com:8448/
# Set the soft limit on the number of file descriptors synapse can use
# Zero is used to indicate synapse should set the soft limit to the
# hard limit.
soft_file_limit: 0
# The GC threshold parameters to pass to `gc.set_threshold`, if defined
# gc_thresholds: [700, 10, 10]
# Set the limit on the returned events in the timeline in the get
# and sync operations. The default value is -1, means no upper limit.
# filter_timeline_limit: 5000
# Whether room invites to users on this server should be blocked
# (except those sent by local server admins). The default is False.
# block_non_admin_invites: True
# Restrict federation to the following whitelist of domains.
# N.B. we recommend also firewalling your federation listener to limit
# inbound federation traffic as early as possible, rather than relying
# purely on this application-layer restriction. If not specified, the
# default is to whitelist everything.
#
# federation_domain_whitelist:
# - lon.example.com
# - nyc.example.com
# - syd.example.com
# List of ports that Synapse should listen on, their purpose and their
# configuration.
listeners:
# Main HTTPS listener
# For when matrix traffic is sent directly to synapse.
-
# The port to listen for HTTPS requests on.
port: 8448
# Local addresses to listen on.
# On Linux and Mac OS, `::` will listen on all IPv4 and IPv6
# addresses by default. For most other OSes, this will only listen
# on IPv6.
bind_addresses:
- '::'
- '0.0.0.0'
# This is a 'http' listener, allows us to specify 'resources'.
type: http
tls: true
# Use the X-Forwarded-For (XFF) header as the client IP and not the
# actual client IP.
x_forwarded: false
# List of HTTP resources to serve on this listener.
resources:
-
# List of resources to host on this listener.
names:
- client # The client-server APIs, both v1 and v2
- webclient # The bundled webclient.
# Should synapse compress HTTP responses to clients that support it?
# This should be disabled if running synapse behind a load balancer
# that can do automatic compression.
compress: true
- names: [federation] # Federation APIs
compress: false
# optional list of additional endpoints which can be loaded via
# dynamic modules
# additional_resources:
# "/_matrix/my/custom/endpoint":
# module: my_module.CustomRequestHandler
# config: {}
# Unsecure HTTP listener,
# For when matrix traffic passes through loadbalancer that unwraps TLS.
- port: 8008
tls: false
bind_addresses: ['::', '0.0.0.0']
type: http
x_forwarded: false
resources:
- names: [client, webclient]
compress: true
- names: [federation]
compress: false
# Turn on the twisted ssh manhole service on localhost on the given
# port.
# - port: 9000
# bind_addresses: ['::1', '127.0.0.1']
# type: manhole
# Database configuration
database:
# The database engine name
name: "sqlite3"
# Arguments to pass to the engine
args:
# Path to the database
database: "/var/lib/matrix-synapse/homeserver.db"
# Number of events to cache in memory.
event_cache_size: "10K"
# A yaml python logging config file
log_config: "/etc/matrix-synapse/log.yaml"
## Ratelimiting ##
# Number of messages a client can send per second
rc_messages_per_second: 0.2
# Number of message a client can send before being throttled
rc_message_burst_count: 10.0
# The federation window size in milliseconds
federation_rc_window_size: 1000
# The number of federation requests from a single server in a window
# before the server will delay processing the request.
federation_rc_sleep_limit: 10
# The duration in milliseconds to delay processing events from
# remote servers by if they go over the sleep limit.
federation_rc_sleep_delay: 500
# The maximum number of concurrent federation requests allowed
# from a single server
federation_rc_reject_limit: 50
# The number of federation requests to concurrently process from a
# single server
federation_rc_concurrent: 3
# Directory where uploaded images and attachments are stored.
media_store_path: "/var/lib/matrix-synapse/media"
# Media storage providers allow media to be stored in different
# locations.
# media_storage_providers:
# - module: file_system
# # Whether to write new local files.
# store_local: false
# # Whether to write new remote media
# store_remote: false
# # Whether to block upload requests waiting for write to this
# # provider to complete
# store_synchronous: false
# config:
# directory: /mnt/some/other/directory
# Directory where in-progress uploads are stored.
uploads_path: "/var/lib/matrix-synapse/uploads"
# The largest allowed upload size in bytes
max_upload_size: "10M"
# Maximum number of pixels that will be thumbnailed
max_image_pixels: "32M"
# Whether to generate new thumbnails on the fly to precisely match
# the resolution requested by the client. If true then whenever
# a new resolution is requested by the client the server will
# generate a new thumbnail. If false the server will pick a thumbnail
# from a precalculated list.
dynamic_thumbnails: false
# List of thumbnail to precalculate when an image is uploaded.
thumbnail_sizes:
- width: 32
height: 32
method: crop
- width: 96
height: 96
method: crop
- width: 320
height: 240
method: scale
- width: 640
height: 480
method: scale
- width: 800
height: 600
method: scale
# Is the preview URL API enabled? If enabled, you *must* specify
# an explicit url_preview_ip_range_blacklist of IPs that the spider is
# denied from accessing.
url_preview_enabled: False
# List of IP address CIDR ranges that the URL preview spider is denied
# from accessing. There are no defaults: you must explicitly
# specify a list for URL previewing to work. You should specify any
# internal services in your network that you do not want synapse to try
# to connect to, otherwise anyone in any Matrix room could cause your
# synapse to issue arbitrary GET requests to your internal services,
# causing serious security issues.
#
# url_preview_ip_range_blacklist:
# - '127.0.0.0/8'
# - '10.0.0.0/8'
# - '172.16.0.0/12'
# - '192.168.0.0/16'
# - '100.64.0.0/10'
# - '169.254.0.0/16'
#
# List of IP address CIDR ranges that the URL preview spider is allowed
# to access even if they are specified in url_preview_ip_range_blacklist.
# This is useful for specifying exceptions to wide-ranging blacklisted
# target IP ranges - e.g. for enabling URL previews for a specific private
# website only visible in your network.
#
# url_preview_ip_range_whitelist:
# - '192.168.1.1'
# Optional list of URL matches that the URL preview spider is
# denied from accessing. You should use url_preview_ip_range_blacklist
# in preference to this, otherwise someone could define a public DNS
# entry that points to a private IP address and circumvent the blacklist.
# This is more useful if you know there is an entire shape of URL that
# you know that will never want synapse to try to spider.
#
# Each list entry is a dictionary of url component attributes as returned
# by urlparse.urlsplit as applied to the absolute form of the URL. See
# https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit
# The values of the dictionary are treated as an filename match pattern
# applied to that component of URLs, unless they start with a ^ in which
# case they are treated as a regular expression match. If all the
# specified component matches for a given list item succeed, the URL is
# blacklisted.
#
# url_preview_url_blacklist:
# # blacklist any URL with a username in its URI
# - username: '*'
#
# # blacklist all *.google.com URLs
# - netloc: 'google.com'
# - netloc: '*.google.com'
#
# # blacklist all plain HTTP URLs
# - scheme: 'http'
#
# # blacklist http(s)://www.acme.com/foo
# - netloc: 'www.acme.com'
# path: '/foo'
#
# # blacklist any URL with a literal IPv4 address
# - netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'
# The largest allowed URL preview spidering size in bytes
max_spider_size: "10M"
## Captcha ##
# See docs/CAPTCHA_SETUP for full details of configuring this.
# This Home Server's ReCAPTCHA public key.
recaptcha_public_key: "YOUR_PUBLIC_KEY"
# This Home Server's ReCAPTCHA private key.
recaptcha_private_key: "YOUR_PRIVATE_KEY"
# Enables ReCaptcha checks when registering, preventing signup
# unless a captcha is answered. Requires a valid ReCaptcha
# public/private key.
enable_registration_captcha: False
# A secret key used to bypass the captcha test entirely.
#captcha_bypass_secret: "YOUR_SECRET_HERE"
# The API endpoint to use for verifying m.login.recaptcha responses.
recaptcha_siteverify_api: "https://www.google.com/recaptcha/api/siteverify"
## Turn ##
# The public URIs of the TURN server to give to clients
turn_uris: []
# The shared secret used to compute passwords for the TURN server
turn_shared_secret: "YOUR_SHARED_SECRET"
# The Username and password if the TURN server needs them and
# does not use a token
#turn_username: "TURNSERVER_USERNAME"
#turn_password: "TURNSERVER_PASSWORD"
# How long generated TURN credentials last
turn_user_lifetime: "1h"
# Whether guests should be allowed to use the TURN server.
# This defaults to True, otherwise VoIP will be unreliable for guests.
# However, it does introduce a slight security risk as it allows users to
# connect to arbitrary endpoints without having first signed up for a
# valid account (e.g. by passing a CAPTCHA).
turn_allow_guests: False
## Registration ##
# Enable registration for new users.
enable_registration: False
# The user must provide all of the below types of 3PID when registering.
#
# registrations_require_3pid:
# - email
# - msisdn
# Mandate that users are only allowed to associate certain formats of
# 3PIDs with accounts on this server.
#
# allowed_local_3pids:
# - medium: email
# pattern: ".*@matrix\.org"
# - medium: email
# pattern: ".*@vector\.im"
# - medium: msisdn
# pattern: "\+44"
# If set, allows registration by anyone who also has the shared
# secret, even if registration is otherwise disabled.
# registration_shared_secret: <PRIVATE STRING>
# Set the number of bcrypt rounds used to generate password hash.
# Larger numbers increase the work factor needed to generate the hash.
# The default number is 12 (which equates to 2^12 rounds).
# N.B. that increasing this will exponentially increase the time required
# to register or login - e.g. 24 => 2^24 rounds which will take >20 mins.
bcrypt_rounds: 12
# Allows users to register as guests without a password/email/etc, and
# participate in rooms hosted on this server which have been made
# accessible to anonymous users.
allow_guest_access: False
# The list of identity servers trusted to verify third party
# identifiers by this server.
trusted_third_party_id_servers:
- matrix.org
- vector.im
- riot.im
# Users who register on this homeserver will automatically be joined
# to these rooms
#auto_join_rooms:
# - "#example:example.com"
## Metrics ###
# Enable collection and rendering of performance metrics
enable_metrics: False
## API Configuration ##
# A list of event types that will be included in the room_invite_state
room_invite_state_types:
- "m.room.join_rules"
- "m.room.canonical_alias"
- "m.room.avatar"
- "m.room.name"
# A list of application service config file to use
app_service_config_files: []
# macaroon_secret_key: <PRIVATE STRING>
# Used to enable access token expiration.
expire_access_token: False
## Signing Keys ##
# Path to the signing key to sign messages with
signing_key_path: "/etc/matrix-synapse/homeserver.signing.key"
# The keys that the server used to sign messages with but won't use
# to sign new messages. E.g. it has lost its private key
old_signing_keys: {}
# "ed25519:auto":
# # Base64 encoded public key
# key: "The public part of your old signing key."
# # Millisecond POSIX timestamp when the key expired.
# expired_ts: 123456789123
# How long key response published by this server is valid for.
# Used to set the valid_until_ts in /key/v2 APIs.
# Determines how quickly servers will query to check which keys
# are still valid.
key_refresh_interval: "1d" # 1 Day.
# The trusted servers to download signing keys from.
perspectives:
servers:
"matrix.org":
verify_keys:
"ed25519:auto":
key: "Noi6WqcDj0QmPxCNQqgezwTlBKrfqehY1u2FyWP9uYw"
# Enable SAML2 for registration and login. Uses pysaml2
# config_path: Path to the sp_conf.py configuration file
# idp_redirect_url: Identity provider URL which will redirect
# the user back to /login/saml2 with proper info.
# See pysaml2 docs for format of config.
#saml2_config:
# enabled: true
# config_path: "/home/erikj/git/synapse/sp_conf.py"
# idp_redirect_url: "http://test/idp"
# Enable CAS for registration and login.
#cas_config:
# enabled: true
# server_url: "https://cas-server.com"
# service_url: "https://homeserver.domain.com:8448"
# #required_attributes:
# # name: value
# The JWT needs to contain a globally unique "sub" (subject) claim.
#
# jwt_config:
# enabled: true
# secret: "a secret"
# algorithm: "HS256"
# Enable password for login.
password_config:
enabled: true
# Uncomment and change to a secret random string for extra security.
# DO NOT CHANGE THIS AFTER INITIAL SETUP!
#pepper: ""
# Enable sending emails for notification events
# Defining a custom URL for Riot is only needed if email notifications
# should contain links to a self-hosted installation of Riot; when set
# the "app_name" setting is ignored.
#
# If your SMTP server requires authentication, the optional smtp_user &
# smtp_pass variables should be used
#
#email:
# enable_notifs: false
# smtp_host: "localhost"
# smtp_port: 25
# smtp_user: "exampleusername"
# smtp_pass: "examplepassword"
# require_transport_security: False
# notif_from: "Your Friendly %(app)s Home Server <noreply@example.com>"
# app_name: Matrix
# template_dir: res/templates
# notif_template_html: notif_mail.html
# notif_template_text: notif_mail.txt
# notif_for_new_users: True
# riot_base_url: "http://localhost/riot"
# password_providers:
# - module: "ldap_auth_provider.LdapAuthProvider"
# config:
# enabled: true
# uri: "ldap://ldap.example.com:389"
# start_tls: true
# base: "ou=users,dc=example,dc=com"
# attributes:
# uid: "cn"
# mail: "email"
# name: "givenName"
# #bind_dn:
# #bind_password:
# #filter: "(objectClass=posixAccount)"
# Clients requesting push notifications can either have the body of
# the message sent in the notification poke along with other details
# like the sender, or just the event ID and room ID (`event_id_only`).
# If clients choose the former, this option controls whether the
# notification request includes the content of the event (other details
# like the sender are still included). For `event_id_only` push, it
# has no effect.
# For modern android devices the notification content will still appear
# because it is loaded by the app. iPhone, however will send a
# notification saying only that a message arrived and who it came from.
#
#push:
# include_content: true
# spam_checker:
# module: "my_custom_project.SuperSpamChecker"
# config:
# example_option: 'things'
# Whether to allow non server admins to create groups on this server
enable_group_creation: false
# If enabled, non server admins can only create groups with local parts
# starting with this prefix
# group_creation_prefix: "unofficial/"
# User Directory configuration
#
# 'search_all_users' defines whether to search all users visible to your HS
# when searching the user directory, rather than limiting to users visible
# in public rooms. Defaults to false. If you set it True, you'll have to run
# UPDATE user_directory_stream_pos SET stream_id = NULL;
# on your database to tell it to rebuild the user_directory search indexes.
#
#user_directory:
# search_all_users: false

2
debian/install vendored Normal file
View File

@ -0,0 +1,2 @@
debian/homeserver.yaml etc/matrix-synapse
debian/log.yaml etc/matrix-synapse

35
debian/log.yaml vendored Normal file
View File

@ -0,0 +1,35 @@
version: 1
formatters:
precise:
format: '%(asctime)s - %(name)s - %(lineno)d - %(levelname)s - %(request)s- %(message)s'
filters:
context:
(): synapse.util.logcontext.LoggingContextFilter
request: ""
handlers:
file:
class: logging.handlers.RotatingFileHandler
formatter: precise
filename: /var/log/matrix-synapse/homeserver.log
maxBytes: 104857600
backupCount: 10
filters: [context]
console:
class: logging.StreamHandler
formatter: precise
level: WARN
loggers:
synapse:
level: INFO
synapse.storage.SQL:
level: INFO
root:
level: INFO
handlers: [file, console]

4
debian/manpages vendored Normal file
View File

@ -0,0 +1,4 @@
debian/hash_password.1
debian/register_new_matrix_user.1
debian/synapse_port_db.1
debian/synctl.1

4
debian/matrix-synapse-py3.links vendored Normal file
View File

@ -0,0 +1,4 @@
opt/venvs/matrix-synapse/bin/hash_password usr/bin/hash_password
opt/venvs/matrix-synapse/bin/register_new_matrix_user usr/bin/register_new_matrix_user
opt/venvs/matrix-synapse/bin/synapse_port_db usr/bin/synapse_port_db
opt/venvs/matrix-synapse/bin/synctl usr/bin/synctl

39
debian/matrix-synapse-py3.postinst vendored Normal file
View File

@ -0,0 +1,39 @@
#!/bin/sh -e
. /usr/share/debconf/confmodule
CONFIGFILE_SERVERNAME="/etc/matrix-synapse/conf.d/server_name.yaml"
CONFIGFILE_REPORTSTATS="/etc/matrix-synapse/conf.d/report_stats.yaml"
USER="matrix-synapse"
case "$1" in
configure|reconfigure)
# Set server name in config file
mkdir -p "/etc/matrix-synapse/conf.d/"
db_get matrix-synapse/server-name
if [ "$RET" ]; then
echo "server_name: $RET" > $CONFIGFILE_SERVERNAME
fi
db_get matrix-synapse/report-stats
if [ "$RET" ]; then
echo "report_stats: $RET" > $CONFIGFILE_REPORTSTATS
fi
if ! getent passwd $USER >/dev/null; then
adduser --quiet --system --no-create-home --home /var/lib/matrix-synapse $USER
fi
for DIR in /var/lib/matrix-synapse /var/log/matrix-synapse /etc/matrix-synapse; do
if ! dpkg-statoverride --list --quiet $DIR >/dev/null; then
dpkg-statoverride --force --quiet --update --add $USER nogroup 0755 $DIR
fi
done
;;
esac
#DEBHELPER#
exit 0

31
debian/matrix-synapse-py3.preinst vendored Normal file
View File

@ -0,0 +1,31 @@
#!/bin/sh -e
# Attempt to undo some of the braindamage caused by
# https://github.com/matrix-org/package-synapse-debian/issues/18.
#
# Due to reasons [1], the old python2 matrix-synapse package will not stop the
# service when the package is uninstalled. Our maintainer scripts will do the
# right thing in terms of ensuring the service is enabled and unmasked, but
# then do a `systemctl start matrix-synapse`, which of course does nothing -
# leaving the old (py2) service running.
#
# There should normally be no reason for the service to be running during our
# preinst, so we assume that if it *is* running, it's due to that situation,
# and stop it.
#
# [1] dh_systemd_start doesn't do anything because it sees that there is an
# init.d script with the same name, so leaves it to dh_installinit.
#
# dh_installinit doesn't do anything because somebody gave it a --no-start
# for unknown reasons.
if [ -x /bin/systemctl ]; then
if /bin/systemctl --quiet is-active -- matrix-synapse; then
echo >&2 "stopping existing matrix-synapse service"
/bin/systemctl stop matrix-synapse || true
fi
fi
#DEBHELPER#
exit 0

9
debian/matrix-synapse-py3.triggers vendored Normal file
View File

@ -0,0 +1,9 @@
# Register interest in Python interpreter changes and
# don't make the Python package dependent on the virtualenv package
# processing (noawait)
interest-noawait /usr/bin/python3.5
interest-noawait /usr/bin/python3.6
interest-noawait /usr/bin/python3.7
# Also provide a symbolic trigger for all dh-virtualenv packages
interest dh-virtualenv-interpreter-update

2
debian/matrix-synapse.default vendored Normal file
View File

@ -0,0 +1,2 @@
# Specify environment variables used when running Synapse
# SYNAPSE_CACHE_FACTOR=1 (default)

15
debian/matrix-synapse.service vendored Normal file
View File

@ -0,0 +1,15 @@
[Unit]
Description=Synapse Matrix homeserver
[Service]
Type=simple
User=matrix-synapse
WorkingDirectory=/var/lib/matrix-synapse
EnvironmentFile=/etc/default/matrix-synapse
ExecStartPre=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/ --generate-keys
ExecStart=/opt/venvs/matrix-synapse/bin/python -m synapse.app.homeserver --config-path=/etc/matrix-synapse/homeserver.yaml --config-path=/etc/matrix-synapse/conf.d/
Restart=always
RestartSec=3
[Install]
WantedBy=multi-user.target

1
debian/po/POTFILES.in vendored Normal file
View File

@ -0,0 +1 @@
[type: gettext/rfc822deb] templates

56
debian/po/templates.pot vendored Normal file
View File

@ -0,0 +1,56 @@
# SOME DESCRIPTIVE TITLE.
# Copyright (C) YEAR THE PACKAGE'S COPYRIGHT HOLDER
# This file is distributed under the same license as the matrix-synapse package.
# FIRST AUTHOR <EMAIL@ADDRESS>, YEAR.
#
#, fuzzy
msgid ""
msgstr ""
"Project-Id-Version: matrix-synapse\n"
"Report-Msgid-Bugs-To: matrix-synapse@packages.debian.org\n"
"POT-Creation-Date: 2017-02-21 07:51+0000\n"
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
"Language-Team: LANGUAGE <LL@li.org>\n"
"Language: \n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=CHARSET\n"
"Content-Transfer-Encoding: 8bit\n"
#. Type: string
#. Description
#: ../templates:1001
msgid "Name of the server:"
msgstr ""
#. Type: string
#. Description
#: ../templates:1001
msgid ""
"The name that this homeserver will appear as, to clients and other servers "
"via federation. This name should match the SRV record published in DNS."
msgstr ""
#. Type: boolean
#. Description
#: ../templates:2001
msgid "Report anonymous statistics?"
msgstr ""
#. Type: boolean
#. Description
#: ../templates:2001
msgid ""
"Developers of Matrix and Synapse really appreciate helping the project out "
"by reporting anonymized usage statistics from this homeserver. Only very "
"basic aggregate data (e.g. number of users) will be reported, but it helps "
"track the growth of the Matrix community, and helps in making Matrix a "
"success, as well as to convince other networks that they should peer with "
"Matrix."
msgstr ""
#. Type: boolean
#. Description
#: ../templates:2001
msgid "Thank you."
msgstr ""

72
debian/register_new_matrix_user.1 vendored Normal file
View File

@ -0,0 +1,72 @@
.\" generated with Ronn/v0.7.3
.\" http://github.com/rtomayko/ronn/tree/0.7.3
.
.TH "REGISTER_NEW_MATRIX_USER" "1" "February 2017" "" ""
.
.SH "NAME"
\fBregister_new_matrix_user\fR \- Used to register new users with a given home server when registration has been disabled
.
.SH "SYNOPSIS"
\fBregister_new_matrix_user\fR options\.\.\.
.
.SH "DESCRIPTION"
\fBregister_new_matrix_user\fR registers new users with a given home server when registration has been disabled\. For this to work, the home server must be configured with the \'registration_shared_secret\' option set\.
.
.P
This accepts the user credentials like the username, password, is user an admin or not and registers the user onto the homeserver database\. Also, a YAML file containing the shared secret can be provided\. If not, the shared secret can be provided via the command line\.
.
.P
By default it assumes the home server URL to be \fBhttps://localhost:8448\fR\. This can be changed via the \fBserver_url\fR command line option\.
.
.SH "FILES"
A sample YAML file accepted by \fBregister_new_matrix_user\fR is described below:
.
.IP "" 4
.
.nf
registration_shared_secret: "s3cr3t"
.
.fi
.
.IP "" 0
.
.SH "OPTIONS"
.
.TP
\fB\-u\fR, \fB\-\-user\fR
Local part of the new user\. Will prompt if omitted\.
.
.TP
\fB\-p\fR, \fB\-\-password\fR
New password for user\. Will prompt if omitted\. Supplying the password on the command line is not recommended\. Use the STDIN instead\.
.
.TP
\fB\-a\fR, \fB\-\-admin\fR
Register new user as an admin\. Will prompt if omitted\.
.
.TP
\fB\-c\fR, \fB\-\-config\fR
Path to server config file containing the shared secret\.
.
.TP
\fB\-k\fR, \fB\-\-shared\-secret\fR
Shared secret as defined in server config file\. This is an optional parameter as it can be also supplied via the YAML file\.
.
.TP
\fBserver_url\fR
URL of the home server\. Defaults to \'https://localhost:8448\'\.
.
.SH "EXAMPLES"
.
.nf
$ register_new_matrix_user \-u user1 \-p p@ssword \-a \-c config\.yaml
.
.fi
.
.SH "COPYRIGHT"
This man page was written by Rahul De <\fIrahulde@swecha\.net\fR> for Debian GNU/Linux distribution\.
.
.SH "SEE ALSO"
synctl(1), synapse_port_db(1), hash_password(1)

61
debian/register_new_matrix_user.ronn vendored Normal file
View File

@ -0,0 +1,61 @@
register_new_matrix_user(1) -- Used to register new users with a given home server when registration has been disabled
======================================================================================================================
## SYNOPSIS
`register_new_matrix_user` options...
## DESCRIPTION
**register_new_matrix_user** registers new users with a given home server when
registration has been disabled. For this to work, the home server must be
configured with the 'registration_shared_secret' option set.
This accepts the user credentials like the username, password, is user an
admin or not and registers the user onto the homeserver database. Also,
a YAML file containing the shared secret can be provided. If not, the
shared secret can be provided via the command line.
By default it assumes the home server URL to be `https://localhost:8448`.
This can be changed via the `server_url` command line option.
## FILES
A sample YAML file accepted by `register_new_matrix_user` is described below:
registration_shared_secret: "s3cr3t"
## OPTIONS
* `-u`, `--user`:
Local part of the new user. Will prompt if omitted.
* `-p`, `--password`:
New password for user. Will prompt if omitted. Supplying the password
on the command line is not recommended. Use the STDIN instead.
* `-a`, `--admin`:
Register new user as an admin. Will prompt if omitted.
* `-c`, `--config`:
Path to server config file containing the shared secret.
* `-k`, `--shared-secret`:
Shared secret as defined in server config file. This is an optional
parameter as it can be also supplied via the YAML file.
* `server_url`:
URL of the home server. Defaults to 'https://localhost:8448'.
## EXAMPLES
$ register_new_matrix_user -u user1 -p p@ssword -a -c config.yaml
## COPYRIGHT
This man page was written by Rahul De <<rahulde@swecha.net>>
for Debian GNU/Linux distribution.
## SEE ALSO
synctl(1), synapse_port_db(1), hash_password(1)

22
debian/rules vendored Executable file
View File

@ -0,0 +1,22 @@
#!/usr/bin/make -f
#
# Build Debian package using https://github.com/spotify/dh-virtualenv
#
override_dh_systemd_enable:
dh_systemd_enable --name=matrix-synapse
override_dh_installinit:
dh_installinit --name=matrix-synapse
override_dh_strip:
override_dh_shlibdeps:
override_dh_virtualenv:
./debian/build_virtualenv
# We are restricted to compat level 9 (because xenial), so have to
# enable the systemd bits manually.
%:
dh $@ --with python-virtualenv --with systemd

1
debian/source/format vendored Normal file
View File

@ -0,0 +1 @@
3.0 (native)

98
debian/synapse_port_db.1 vendored Normal file
View File

@ -0,0 +1,98 @@
.\" generated with Ronn/v0.7.3
.\" http://github.com/rtomayko/ronn/tree/0.7.3
.
.TH "SYNAPSE_PORT_DB" "1" "February 2017" "" ""
.
.SH "NAME"
\fBsynapse_port_db\fR \- A script to port an existing synapse SQLite database to a new PostgreSQL database\.
.
.SH "SYNOPSIS"
\fBsynapse_port_db\fR [\-v] \-\-sqlite\-database=\fIdbfile\fR \-\-postgres\-config=\fIyamlconfig\fR [\-\-curses] [\-\-batch\-size=\fIbatch\-size\fR]
.
.SH "DESCRIPTION"
\fBsynapse_port_db\fR ports an existing synapse SQLite database to a new PostgreSQL database\.
.
.P
SQLite database is specified with \fB\-\-sqlite\-database\fR option and PostgreSQL configuration required to connect to PostgreSQL database is provided using \fB\-\-postgres\-config\fR configuration\. The configuration is specified in YAML format\.
.
.SH "OPTIONS"
.
.TP
\fB\-v\fR
Print log messages in \fBdebug\fR level instead of \fBinfo\fR level\.
.
.TP
\fB\-\-sqlite\-database\fR
The snapshot of the SQLite database file\. This must not be currently used by a running synapse server\.
.
.TP
\fB\-\-postgres\-config\fR
The database config file for the PostgreSQL database\.
.
.TP
\fB\-\-curses\fR
Display a curses based progress UI\.
.
.SH "CONFIG FILE"
The postgres configuration file must be a valid YAML file with the following options\.
.
.IP "\(bu" 4
\fBdatabase\fR: Database configuration section\. This section header can be ignored and the options below may be specified as top level keys\.
.
.IP "\(bu" 4
\fBname\fR: Connector to use when connecting to the database\. This value must be \fBpsycopg2\fR\.
.
.IP "\(bu" 4
\fBargs\fR: DB API 2\.0 compatible arguments to send to the \fBpsycopg2\fR module\.
.
.IP "\(bu" 4
\fBdbname\fR \- the database name
.
.IP "\(bu" 4
\fBuser\fR \- user name used to authenticate
.
.IP "\(bu" 4
\fBpassword\fR \- password used to authenticate
.
.IP "\(bu" 4
\fBhost\fR \- database host address (defaults to UNIX socket if not provided)
.
.IP "\(bu" 4
\fBport\fR \- connection port number (defaults to 5432 if not provided)
.
.IP "" 0
.
.IP "\(bu" 4
\fBsynchronous_commit\fR: Optional\. Default is True\. If the value is \fBFalse\fR, enable asynchronous commit and don\'t wait for the server to call fsync before ending the transaction\. See: https://www\.postgresql\.org/docs/current/static/wal\-async\-commit\.html
.
.IP "" 0
.
.IP "" 0
.
.P
Following example illustrates the configuration file format\.
.
.IP "" 4
.
.nf
database:
name: psycopg2
args:
dbname: synapsedb
user: synapseuser
password: ORohmi9Eet=ohphi
host: localhost
synchronous_commit: false
.
.fi
.
.IP "" 0
.
.SH "COPYRIGHT"
This man page was written by Sunil Mohan Adapa <\fIsunil@medhas\.org\fR> for Debian GNU/Linux distribution\.
.
.SH "SEE ALSO"
synctl(1), hash_password(1), register_new_matrix_user(1)

87
debian/synapse_port_db.ronn vendored Normal file
View File

@ -0,0 +1,87 @@
synapse_port_db(1) -- A script to port an existing synapse SQLite database to a new PostgreSQL database.
=============================================
## SYNOPSIS
`synapse_port_db` [-v] --sqlite-database=<dbfile> --postgres-config=<yamlconfig> [--curses] [--batch-size=<batch-size>]
## DESCRIPTION
**synapse_port_db** ports an existing synapse SQLite database to a new
PostgreSQL database.
SQLite database is specified with `--sqlite-database` option and
PostgreSQL configuration required to connect to PostgreSQL database is
provided using `--postgres-config` configuration. The configuration
is specified in YAML format.
## OPTIONS
* `-v`:
Print log messages in `debug` level instead of `info` level.
* `--sqlite-database`:
The snapshot of the SQLite database file. This must not be
currently used by a running synapse server.
* `--postgres-config`:
The database config file for the PostgreSQL database.
* `--curses`:
Display a curses based progress UI.
## CONFIG FILE
The postgres configuration file must be a valid YAML file with the
following options.
* `database`:
Database configuration section. This section header can be
ignored and the options below may be specified as top level
keys.
* `name`:
Connector to use when connecting to the database. This value must
be `psycopg2`.
* `args`:
DB API 2.0 compatible arguments to send to the `psycopg2` module.
* `dbname` - the database name
* `user` - user name used to authenticate
* `password` - password used to authenticate
* `host` - database host address (defaults to UNIX socket if not
provided)
* `port` - connection port number (defaults to 5432 if not
provided)
* `synchronous_commit`:
Optional. Default is True. If the value is `False`, enable
asynchronous commit and don't wait for the server to call fsync
before ending the transaction. See:
https://www.postgresql.org/docs/current/static/wal-async-commit.html
Following example illustrates the configuration file format.
database:
name: psycopg2
args:
dbname: synapsedb
user: synapseuser
password: ORohmi9Eet=ohphi
host: localhost
synchronous_commit: false
## COPYRIGHT
This man page was written by Sunil Mohan Adapa <<sunil@medhas.org>> for
Debian GNU/Linux distribution.
## SEE ALSO
synctl(1), hash_password(1), register_new_matrix_user(1)

63
debian/synctl.1 vendored Normal file
View File

@ -0,0 +1,63 @@
.\" generated with Ronn/v0.7.3
.\" http://github.com/rtomayko/ronn/tree/0.7.3
.
.TH "SYNCTL" "1" "February 2017" "" ""
.
.SH "NAME"
\fBsynctl\fR \- Synapse server control interface
.
.SH "SYNOPSIS"
Start, stop or restart synapse server\.
.
.P
\fBsynctl\fR {start|stop|restart} [configfile] [\-w|\-\-worker=\fIWORKERCONFIG\fR] [\-a|\-\-all\-processes=\fIWORKERCONFIGDIR\fR]
.
.SH "DESCRIPTION"
\fBsynctl\fR can be used to start, stop or restart Synapse server\. The control operation can be done on all processes or a single worker process\.
.
.SH "OPTIONS"
.
.TP
\fBaction\fR
The value of action should be one of \fBstart\fR, \fBstop\fR or \fBrestart\fR\.
.
.TP
\fBconfigfile\fR
Optional path of the configuration file to use\. Default value is \fBhomeserver\.yaml\fR\. The configuration file must exist for the operation to succeed\.
.
.TP
\fB\-w\fR, \fB\-\-worker\fR:
.
.IP
Perform start, stop or restart operations on a single worker\. Incompatible with \fB\-a\fR|\fB\-\-all\-processes\fR\. Value passed must be a valid worker\'s configuration file\.
.
.TP
\fB\-a\fR, \fB\-\-all\-processes\fR:
.
.IP
Perform start, stop or restart operations on all the workers in the given directory and the main synapse process\. Incompatible with \fB\-w\fR|\fB\-\-worker\fR\. Value passed must be a directory containing valid work configuration files\. All files ending with \fB\.yaml\fR extension shall be considered as configuration files and all other files in the directory are ignored\.
.
.SH "CONFIGURATION FILE"
Configuration file may be generated as follows:
.
.IP "" 4
.
.nf
$ python \-B \-m synapse\.app\.homeserver \-c config\.yaml \-\-generate\-config \-\-server\-name=<server name>
.
.fi
.
.IP "" 0
.
.SH "ENVIRONMENT"
.
.TP
\fBSYNAPSE_CACHE_FACTOR\fR
Synapse\'s architecture is quite RAM hungry currently \- a lot of recent room data and metadata is deliberately cached in RAM in order to speed up common requests\. This will be improved in future, but for now the easiest way to either reduce the RAM usage (at the risk of slowing things down) is to set the SYNAPSE_CACHE_FACTOR environment variable\. Roughly speaking, a SYNAPSE_CACHE_FACTOR of 1\.0 will max out at around 3\-4GB of resident memory \- this is what we currently run the matrix\.org on\. The default setting is currently 0\.1, which is probably around a ~700MB footprint\. You can dial it down further to 0\.02 if desired, which targets roughly ~512MB\. Conversely you can dial it up if you need performance for lots of users and have a box with a lot of RAM\.
.
.SH "COPYRIGHT"
This man page was written by Sunil Mohan Adapa <\fIsunil@medhas\.org\fR> for Debian GNU/Linux distribution\.
.
.SH "SEE ALSO"
synapse_port_db(1), hash_password(1), register_new_matrix_user(1)

70
debian/synctl.ronn vendored Normal file
View File

@ -0,0 +1,70 @@
synctl(1) -- Synapse server control interface
=============================================
## SYNOPSIS
Start, stop or restart synapse server.
`synctl` {start|stop|restart} [configfile] [-w|--worker=<WORKERCONFIG>] [-a|--all-processes=<WORKERCONFIGDIR>]
## DESCRIPTION
**synctl** can be used to start, stop or restart Synapse server. The
control operation can be done on all processes or a single worker
process.
## OPTIONS
* `action`:
The value of action should be one of `start`, `stop` or `restart`.
* `configfile`:
Optional path of the configuration file to use. Default value is
`homeserver.yaml`. The configuration file must exist for the
operation to succeed.
* `-w`, `--worker`:
Perform start, stop or restart operations on a single worker.
Incompatible with `-a`|`--all-processes`. Value passed must be a
valid worker's configuration file.
* `-a`, `--all-processes`:
Perform start, stop or restart operations on all the workers in
the given directory and the main synapse process. Incompatible
with `-w`|`--worker`. Value passed must be a directory containing
valid work configuration files. All files ending with `.yaml`
extension shall be considered as configuration files and all other
files in the directory are ignored.
## CONFIGURATION FILE
Configuration file may be generated as follows:
$ python -B -m synapse.app.homeserver -c config.yaml --generate-config --server-name=<server name>
## ENVIRONMENT
* `SYNAPSE_CACHE_FACTOR`:
Synapse's architecture is quite RAM hungry currently - a lot of
recent room data and metadata is deliberately cached in RAM in
order to speed up common requests. This will be improved in
future, but for now the easiest way to either reduce the RAM usage
(at the risk of slowing things down) is to set the
SYNAPSE_CACHE_FACTOR environment variable. Roughly speaking, a
SYNAPSE_CACHE_FACTOR of 1.0 will max out at around 3-4GB of
resident memory - this is what we currently run the matrix.org
on. The default setting is currently 0.1, which is probably around
a ~700MB footprint. You can dial it down further to 0.02 if
desired, which targets roughly ~512MB. Conversely you can dial it
up if you need performance for lots of users and have a box with a
lot of RAM.
## COPYRIGHT
This man page was written by Sunil Mohan Adapa <<sunil@medhas.org>> for
Debian GNU/Linux distribution.
## SEE ALSO
synapse_port_db(1), hash_password(1), register_new_matrix_user(1)

19
debian/templates vendored Normal file
View File

@ -0,0 +1,19 @@
Template: matrix-synapse/server-name
Type: string
_Description: Name of the server:
The name that this homeserver will appear as, to clients and other
servers via federation. This name should match the SRV record
published in DNS.
Template: matrix-synapse/report-stats
Type: boolean
Default: false
_Description: Report anonymous statistics?
Developers of Matrix and Synapse really appreciate helping the
project out by reporting anonymized usage statistics from this
homeserver. Only very basic aggregate data (e.g. number of users)
will be reported, but it helps track the growth of the Matrix
community, and helps in making Matrix a success, as well as to
convince other networks that they should peer with Matrix.
.
Thank you.

View File

@ -0,0 +1,35 @@
# A dockerfile which builds a docker image for building a debian package for
# synapse. The distro to build for is passed as a docker build var.
#
# The default entrypoint expects the synapse source to be mounted as a
# (read-only) volume at /synapse/source, and an output directory at /debs.
#
# A pair of environment variables (TARGET_USERID and TARGET_GROUPID) can be
# passed to the docker container; if these are set, the build script will chown
# the build products accordingly, to avoid ending up with things owned by root
# in the host filesystem.
# Get the distro we want to pull from as a dynamic build variable
ARG distro=""
FROM ${distro}
# Install the build dependencies
RUN apt-get update -qq -o Acquire::Languages=none \
&& env DEBIAN_FRONTEND=noninteractive apt-get install \
-yqq --no-install-recommends -o Dpkg::Options::=--force-unsafe-io \
build-essential \
debhelper \
devscripts \
dh-systemd \
dh-virtualenv \
equivs \
lsb-release \
python3-dev \
python3-pip \
python3-setuptools \
python3-venv \
sqlite3 \
wget
WORKDIR /synapse/source
ENTRYPOINT ["bash","/synapse/source/docker/build_debian.sh"]

41
docker/build_debian.sh Normal file
View File

@ -0,0 +1,41 @@
#!/bin/bash
# The script to build the Debian package, as ran inside the Docker image.
set -ex
DIST=`lsb_release -c -s`
# We need to build a newer dh_virtualenv on older OSes like Xenial.
if [ "$DIST" = 'xenial' ]; then
mkdir -p /tmp/dhvenv
cd /tmp/dhvenv
wget https://github.com/spotify/dh-virtualenv/archive/1.1.tar.gz
tar xvf 1.1.tar.gz
cd dh-virtualenv-1.1/
env DEBIAN_FRONTEND=noninteractive mk-build-deps -ri -t "apt-get -yqq --no-install-recommends -o Dpkg::Options::=--force-unsafe-io"
dpkg-buildpackage -us -uc -b
cd /tmp/dhvenv
apt-get install -yqq ./dh-virtualenv_1.1-1_all.deb
fi
# we get a read-only copy of the source: make a writeable copy
cp -aT /synapse/source /synapse/build
cd /synapse/build
# add an entry to the changelog for this distribution
dch -M -l "+$DIST" "build for $DIST"
dch -M -r "" --force-distribution --distribution "$DIST"
dpkg-buildpackage -us -uc
ls -l ..
# copy the build results out, setting perms if necessary
shopt -s nullglob
for i in ../*.deb ../*.dsc ../*.tar.xz ../*.changes ../*.buildinfo; do
[ -z "$TARGET_USERID" ] || chown "$TARGET_USERID" "$i"
[ -z "$TARGET_GROUPID" ] || chgrp "$TARGET_GROUPID" "$i"
mv "$i" /debs
done

39
docker/build_debian_packages.sh Executable file
View File

@ -0,0 +1,39 @@
#!/bin/bash
# Build the Debian packages using Docker images.
#
# This script builds the Docker images and then executes them sequentially, each
# one building a Debian package for the targeted operating system. It is
# designed to be a "single command" to produce all the images.
#
# By default, builds for all known distributions, but a list of distributions
# can be passed on the commandline for debugging.
set -ex
cd `dirname $0`
if [ $# -lt 1 ]; then
DISTS=(debian:stretch debian:sid ubuntu:xenial ubuntu:bionic ubuntu:cosmic)
else
DISTS=("$@")
fi
# Make the dir where the debs will live.
#
# Note that we deliberately put this outside the source tree, otherwise we tend
# to get source packages which are full of debs. (We could hack around that
# with more magic in the build_debian.sh script, but that doesn't solve the
# problem for natively-run dpkg-buildpakage).
mkdir -p ../../debs
# Build each OS image;
for i in "${DISTS[@]}"; do
TAG=$(echo ${i} | cut -d ":" -f 2)
docker build --tag dh-venv-builder:${TAG} --build-arg distro=${i} -f Dockerfile-dhvirtualenv .
docker run -it --rm --volume=$(pwd)/../\:/synapse/source:ro --volume=$(pwd)/../../debs:/debs \
-e TARGET_USERID=$(id -u) \
-e TARGET_GROUPID=$(id -g) \
dh-venv-builder:${TAG}
done

View File

@ -78,7 +78,7 @@ CONDITIONAL_REQUIREMENTS = {
},
"postgres": {
"psycopg2>=2.6": ["psycopg2"]
}
},
}

View File

@ -119,6 +119,7 @@ setenv =
[testenv:packaging]
skip_install=True
deps =
check-manifest
commands =