anonymousland-synapse/docs/usage/configuration/config_documentation.md

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

3512 lines
117 KiB
Markdown
Raw Normal View History

# Configuring Synapse
This is intended as a guide to the Synapse configuration. The behavior of a Synapse instance can be modified
through the many configuration settings documented here — each config option is explained,
including what the default is, how to change the default and what sort of behaviour the setting governs.
Also included is an example configuration for each setting. If you don't want to spend a lot of time
thinking about options, the config as generated sets sensible defaults for all values. Do note however that the
database defaults to SQLite, which is not recommended for production usage. You can read more on this subject
[here](../../setup/installation.md#using-postgresql).
## Config Conventions
Configuration options that take a time period can be set using a number
followed by a letter. Letters have the following meanings:
* `s` = second
* `m` = minute
* `h` = hour
* `d` = day
* `w` = week
* `y` = year
For example, setting `redaction_retention_period: 5m` would remove redacted
messages from the database after 5 minutes, rather than 5 months.
### YAML
The configuration file is a [YAML](https://yaml.org/) file, which means that certain syntax rules
apply if you want your config file to be read properly. A few helpful things to know:
* `#` before any option in the config will comment out that setting and either a default (if available) will
be applied or Synapse will ignore the setting. Thus, in example #1 below, the setting will be read and
applied, but in example #2 the setting will not be read and a default will be applied.
Example #1:
```yaml
pid_file: DATADIR/homeserver.pid
```
Example #2:
```yaml
#pid_file: DATADIR/homeserver.pid
```
* Indentation matters! The indentation before a setting
will determine whether a given setting is read as part of another
setting, or considered on its own. Thus, in example #1, the `enabled` setting
is read as a sub-option of the `presence` setting, and will be properly applied.
However, the lack of indentation before the `enabled` setting in example #2 means
that when reading the config, Synapse will consider both `presence` and `enabled` as
different settings. In this case, `presence` has no value, and thus a default applied, and `enabled`
is an option that Synapse doesn't recognize and thus ignores.
Example #1:
```yaml
presence:
enabled: false
```
Example #2:
```yaml
presence:
enabled: false
```
In this manual, all top-level settings (ones with no indentation) are identified
at the beginning of their section (i.e. "Config option: `example_setting`") and
the sub-options, if any, are identified and listed in the body of the section.
In addition, each setting has an example of its usage, with the proper indentation
shown.
## Contents
[Modules](#modules)
[Server](#server)
[Homeserver Blocking](#homeserver-blocking)
[TLS](#tls)
[Federation](#federation)
[Caching](#caching)
[Database](#database)
[Logging](#logging)
[Ratelimiting](#ratelimiting)
[Media Store](#media-store)
[Captcha](#captcha)
[TURN](#turn)
[Registration](#registration)
[API Configuration](#api-configuration)
[Signing Keys](#signing-keys)
[Single Sign On Integration](#single-sign-on-integration)
[Push](#push)
[Rooms](#rooms)
[Opentracing](#opentracing)
[Workers](#workers)
[Background Updates](#background-updates)
## Modules
Server admins can expand Synapse's functionality with external modules.
See [here](../../modules/index.md) for more
documentation on how to configure or create custom modules for Synapse.
---
Config option: `modules`
Use the `module` sub-option to add modules under this option to extend functionality.
The `module` setting then has a sub-option, `config`, which can be used to define some configuration
for the `module`.
Defaults to none.
Example configuration:
```yaml
modules:
- module: my_super_module.MySuperClass
config:
do_thing: true
- module: my_other_super_module.SomeClass
config: {}
```
---
## Server ##
Define your homeserver name and other base options.
---
Config option: `server_name`
This sets the public-facing domain of the server.
The `server_name` name will appear at the end of usernames and room addresses
created on your server. For example if the `server_name` was example.com,
usernames on your server would be in the format `@user:example.com`
In most cases you should avoid using a matrix specific subdomain such as
matrix.example.com or synapse.example.com as the `server_name` for the same
reasons you wouldn't use user@email.example.com as your email address.
See [here](../../delegate.md)
for information on how to host Synapse on a subdomain while preserving
a clean `server_name`.
The `server_name` cannot be changed later so it is important to
configure this correctly before you start Synapse. It should be all
lowercase and may contain an explicit port.
There is no default for this option.
Example configuration #1:
```yaml
server_name: matrix.org
```
Example configuration #2:
```yaml
server_name: localhost:8080
```
---
Config option: `pid_file`
When running Synapse as a daemon, the file to store the pid in. Defaults to none.
Example configuration:
```yaml
pid_file: DATADIR/homeserver.pid
```
---
Config option: `web_client_location`
The absolute URL to the web client which `/` will redirect to. Defaults to none.
Example configuration:
```yaml
web_client_location: https://riot.example.com/
```
---
Config option: `public_baseurl`
The public-facing base URL that clients use to access this Homeserver (not
including _matrix/...). This is the same URL a user might enter into the
'Custom Homeserver URL' field on their client. If you use Synapse with a
reverse proxy, this should be the URL to reach Synapse via the proxy.
Otherwise, it should be the URL to reach Synapse's client HTTP listener (see
'listeners' below).
Defaults to `https://<server_name>/`.
Example configuration:
```yaml
public_baseurl: https://example.com/
```
---
Config option: `serve_server_wellknown`
By default, other servers will try to reach our server on port 8448, which can
be inconvenient in some environments.
Provided `https://<server_name>/` on port 443 is routed to Synapse, this
option configures Synapse to serve a file at `https://<server_name>/.well-known/matrix/server`.
This will tell other servers to send traffic to port 443 instead.
This option currently defaults to false.
See https://matrix-org.github.io/synapse/latest/delegate.html for more
information.
Example configuration:
```yaml
serve_server_wellknown: true
```
---
Config option: `soft_file_limit`
Set the soft limit on the number of file descriptors synapse can use.
Zero is used to indicate synapse should set the soft limit to the hard limit.
Defaults to 0.
Example configuration:
```yaml
soft_file_limit: 3
```
---
Config option: `presence`
Presence tracking allows users to see the state (e.g online/offline)
of other local and remote users. Set the `enabled` sub-option to false to
disable presence tracking on this homeserver. Defaults to true.
This option replaces the previous top-level 'use_presence' option.
Example configuration:
```yaml
presence:
enabled: false
```
---
Config option: `require_auth_for_profile_requests`
Whether to require authentication to retrieve profile data (avatars, display names) of other
users through the client API. Defaults to false. Note that profile data is also available
via the federation API, unless `allow_profile_lookup_over_federation` is set to false.
Example configuration:
```yaml
require_auth_for_profile_requests: true
```
---
Config option: `limit_profile_requests_to_users_who_share_rooms`
Use this option to require a user to share a room with another user in order
to retrieve their profile information. Only checked on Client-Server
requests. Profile requests from other servers should be checked by the
requesting server. Defaults to false.
Example configuration:
```yaml
limit_profile_requests_to_users_who_share_rooms: true
```
---
Config option: `include_profile_data_on_invite`
Use this option to prevent a user's profile data from being retrieved and
displayed in a room until they have joined it. By default, a user's
profile data is included in an invite event, regardless of the values
of the above two settings, and whether or not the users share a server.
Defaults to true.
Example configuration:
```yaml
include_profile_data_on_invite: false
```
---
Config option: `allow_public_rooms_without_auth`
If set to true, removes the need for authentication to access the server's
public rooms directory through the client API, meaning that anyone can
query the room directory. Defaults to false.
Example configuration:
```yaml
allow_public_rooms_without_auth: true
```
---
Config option: `allow_public_rooms_without_auth`
If set to true, allows any other homeserver to fetch the server's public
rooms directory via federation. Defaults to false.
Example configuration:
```yaml
allow_public_rooms_over_federation: true
```
---
Config option: `default_room_version`
The default room version for newly created rooms on this server.
Known room versions are listed [here](https://spec.matrix.org/latest/rooms/#complete-list-of-room-versions)
For example, for room version 1, `default_room_version` should be set
to "1".
Currently defaults to "9".
Example configuration:
```yaml
default_room_version: "8"
```
---
Config option: `gc_thresholds`
The garbage collection threshold parameters to pass to `gc.set_threshold`, if defined.
Defaults to none.
Example configuration:
```yaml
gc_thresholds: [700, 10, 10]
```
---
Config option: `gc_min_interval`
The minimum time in seconds between each GC for a generation, regardless of
the GC thresholds. This ensures that we don't do GC too frequently. A value of `[1s, 10s, 30s]`
indicates that a second must pass between consecutive generation 0 GCs, etc.
Defaults to `[1s, 10s, 30s]`.
Example configuration:
```yaml
gc_min_interval: [0.5s, 30s, 1m]
```
---
Config option: `filter_timeline_limit`
Set the limit on the returned events in the timeline in the get
and sync operations. Defaults to 100. A value of -1 means no upper limit.
Example configuration:
```yaml
filter_timeline_limit: 5000
```
---
Config option: `block_non_admin_invites`
Whether room invites to users on this server should be blocked
(except those sent by local server admins). Defaults to false.
Example configuration:
```yaml
block_non_admin_invites: true
```
---
Config option: `enable_search`
If set to false, new messages will not be indexed for searching and users
will receive errors when searching for messages. Defaults to true.
Example configuration:
```yaml
enable_search: false
```
---
Config option: `ip_range_blacklist`
This option prevents outgoing requests from being sent to the specified blacklisted IP address
CIDR ranges. If this option is not specified then it defaults to private IP
address ranges (see the example below).
The blacklist applies to the outbound requests for federation, identity servers,
push servers, and for checking key validity for third-party invite events.
(0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
listed here, since they correspond to unroutable addresses.)
This option replaces `federation_ip_range_blacklist` in Synapse v1.25.0.
Note: The value is ignored when an HTTP proxy is in use.
Example configuration:
```yaml
ip_range_blacklist:
- '127.0.0.0/8'
- '10.0.0.0/8'
- '172.16.0.0/12'
- '192.168.0.0/16'
- '100.64.0.0/10'
- '192.0.0.0/24'
- '169.254.0.0/16'
- '192.88.99.0/24'
- '198.18.0.0/15'
- '192.0.2.0/24'
- '198.51.100.0/24'
- '203.0.113.0/24'
- '224.0.0.0/4'
- '::1/128'
- 'fe80::/10'
- 'fc00::/7'
- '2001:db8::/32'
- 'ff00::/8'
- 'fec0::/10'
```
---
Config option: `ip_range_whitelist`
List of IP address CIDR ranges that should be allowed for federation,
identity servers, push servers, and for checking key validity for
third-party invite events. This is useful for specifying exceptions to
wide-ranging blacklisted target IP ranges - e.g. for communication with
a push server only visible in your network.
This whitelist overrides `ip_range_blacklist` and defaults to an empty
list.
Example configuration:
```yaml
ip_range_whitelist:
- '192.168.1.1'
```
---
Config option: `listeners`
List of ports that Synapse should listen on, their purpose and their
configuration.
Sub-options for each listener include:
* `port`: the TCP port to bind to.
* `bind_addresses`: a list of local addresses to listen on. The default is
'all local interfaces'.
* `type`: the type of listener. Normally `http`, but other valid options are:
* `manhole`: (see the docs [here](../../manhole.md)),
* `metrics`: (see the docs [here](../../metrics-howto.md)),
* `replication`: (see the docs [here](../../workers.md)).
* `tls`: set to true to enable TLS for this listener. Will use the TLS key/cert specified in tls_private_key_path / tls_certificate_path.
* `x_forwarded`: Only valid for an 'http' listener. Set to true to use the X-Forwarded-For header as the client IP. Useful when Synapse is
behind a reverse-proxy.
* `resources`: Only valid for an 'http' listener. A list of resources to host
on this port. Sub-options for each resource are:
* `names`: a list of names of HTTP resources. See below for a list of valid resource names.
* `compress`: set to true to enable HTTP compression for this resource.
* `additional_resources`: Only valid for an 'http' listener. A map of
additional endpoints which should be loaded via dynamic modules.
Valid resource names are:
* `client`: the client-server API (/_matrix/client), and the synapse admin API (/_synapse/admin). Also implies 'media' and 'static'.
* `consent`: user consent forms (/_matrix/consent). See [here](../../consent_tracking.md) for more.
* `federation`: the server-server API (/_matrix/federation). Also implies `media`, `keys`, `openid`
* `keys`: the key discovery API (/_matrix/keys).
* `media`: the media API (/_matrix/media).
* `metrics`: the metrics interface. See [here](../../metrics-howto.md).
* `openid`: OpenID authentication. See [here](../../openid.md).
* `replication`: the HTTP replication API (/_synapse/replication). See [here](../../workers.md).
* `static`: static resources under synapse/static (/_matrix/static). (Mostly useful for 'fallback authentication'.)
Example configuration #1:
```yaml
listeners:
# TLS-enabled listener: for when matrix traffic is sent directly to synapse.
#
# (Note that you will also need to give Synapse a TLS key and certificate: see the TLS section
# below.)
#
- port: 8448
type: http
tls: true
resources:
- names: [client, federation]
```
Example configuration #2:
```yaml
listeners:
# Unsecure HTTP listener: for when matrix traffic passes through a reverse proxy
# that unwraps TLS.
#
# If you plan to use a reverse proxy, please see
# https://matrix-org.github.io/synapse/latest/reverse_proxy.html.
#
- port: 8008
tls: false
type: http
x_forwarded: true
bind_addresses: ['::1', '127.0.0.1']
resources:
- names: [client, federation]
compress: false
# example additional_resources:
additional_resources:
"/_matrix/my/custom/endpoint":
module: my_module.CustomRequestHandler
config: {}
# Turn on the twisted ssh manhole service on localhost on the given
# port.
- port: 9000
bind_addresses: ['::1', '127.0.0.1']
type: manhole
```
---
Config option: `manhole_settings`
Connection settings for the manhole. You can find more information
on the manhole [here](../../manhole.md). Manhole sub-options include:
* `username` : the username for the manhole. This defaults to 'matrix'.
* `password`: The password for the manhole. This defaults to 'rabbithole'.
* `ssh_priv_key_path` and `ssh_pub_key_path`: The private and public SSH key pair used to encrypt the manhole traffic.
If these are left unset, then hardcoded and non-secret keys are used,
which could allow traffic to be intercepted if sent over a public network.
Example configuration:
```yaml
manhole_settings:
username: manhole
password: mypassword
ssh_priv_key_path: CONFDIR/id_rsa
ssh_pub_key_path: CONFDIR/id_rsa.pub
```
---
Config option: `dummy_events_threshold`
Forward extremities can build up in a room due to networking delays between
homeservers. Once this happens in a large room, calculation of the state of
that room can become quite expensive. To mitigate this, once the number of
forward extremities reaches a given threshold, Synapse will send an
`org.matrix.dummy_event` event, which will reduce the forward extremities
in the room.
This setting defines the threshold (i.e. number of forward extremities in the room) at which dummy events are sent.
The default value is 10.
Example configuration:
```yaml
dummy_events_threshold: 5
```
---
## Homeserver blocking ##
Useful options for Synapse admins.
---
Config option: `admin_contact`
How to reach the server admin, used in `ResourceLimitError`. Defaults to none.
Example configuration:
```yaml
admin_contact: 'mailto:admin@server.com'
```
---
Config option: `hs_disabled` and `hs_disabled_message`
Blocks users from connecting to the homeserver and provides a human-readable reason
why the connection was blocked. Defaults to false.
Example configuration:
```yaml
hs_disabled: true
hs_disabled_message: 'Reason for why the HS is blocked'
```
---
Config option: `limit_usage_by_mau`
This option disables/enables monthly active user blocking. Used in cases where the admin or
server owner wants to limit to the number of monthly active users. When enabled and a limit is
reached the server returns a `ResourceLimitError` with error type `Codes.RESOURCE_LIMIT_EXCEEDED`.
Defaults to false. If this is enabled, a value for `max_mau_value` must also be set.
Example configuration:
```yaml
limit_usage_by_mau: true
```
---
Config option: `max_mau_value`
This option sets the hard limit of monthly active users above which the server will start
blocking user actions if `limit_usage_by_mau` is enabled. Defaults to 0.
Example configuration:
```yaml
max_mau_value: 50
```
---
Config option: `mau_trial_days`
The option `mau_trial_days` is a means to add a grace period for active users. It
means that users must be active for the specified number of days before they
can be considered active and guards against the case where lots of users
sign up in a short space of time never to return after their initial
session. Defaults to 0.
Example configuration:
```yaml
mau_trial_days: 5
```
---
Config option: `mau_appservice_trial_days`
The option `mau_appservice_trial_days` is similar to `mau_trial_days`, but applies a different
trial number if the user was registered by an appservice. A value
of 0 means no trial days are applied. Appservices not listed in this dictionary
use the value of `mau_trial_days` instead.
Example configuration:
```yaml
mau_appservice_trial_days:
my_appservice_id: 3
another_appservice_id: 6
```
---
Config option: `mau_limit_alerting`
The option `mau_limit_alerting` is a means of limiting client-side alerting
should the mau limit be reached. This is useful for small instances
where the admin has 5 mau seats (say) for 5 specific people and no
interest increasing the mau limit further. Defaults to true, which
means that alerting is enabled.
Example configuration:
```yaml
mau_limit_alerting: false
```
---
Config option: `mau_stats_only`
If enabled, the metrics for the number of monthly active users will
be populated, however no one will be limited based on these numbers. If `limit_usage_by_mau`
is true, this is implied to be true. Defaults to false.
Example configuration:
```yaml
mau_stats_only: true
```
---
Config option: `mau_limit_reserved_threepids`
Sometimes the server admin will want to ensure certain accounts are
never blocked by mau checking. These accounts are specified by this option.
Defaults to none. Add accounts by specifying the `medium` and `address` of the
reserved threepid (3rd party identifier).
Example configuration:
```yaml
mau_limit_reserved_threepids:
- medium: 'email'
address: 'reserved_user@example.com'
```
---
Config option: `server_context`
This option is used by phonehome stats to group together related servers.
Defaults to none.
Example configuration:
```yaml
server_context: context
```
---
Config option: `limit_remote_rooms`
When this option is enabled, the room "complexity" will be checked before a user
joins a new remote room. If it is above the complexity limit, the server will
disallow joining, or will instantly leave. This is useful for homeservers that are
resource-constrained. Options for this setting include:
* `enabled`: whether this check is enabled. Defaults to false.
* `complexity`: the limit above which rooms cannot be joined. The default is 1.0.
* `complexity_error`: override the error which is returned when the room is too complex with a
custom message.
* `admins_can_join`: allow server admins to join complex rooms. Default is false.
Room complexity is an arbitrary measure based on factors such as the number of
users in the room.
Example configuration:
```yaml
limit_remote_rooms:
enabled: true
complexity: 0.5
complexity_error: "I can't let you do that, Dave."
admins_can_join: true
```
---
Config option: `require_membership_for_aliases`
Whether to require a user to be in the room to add an alias to it.
Defaults to true.
Example configuration:
```yaml
require_membership_for_aliases: false
```
---
Config option: `allow_per_room_profiles`
Whether to allow per-room membership profiles through the sending of membership
events with profile information that differs from the target's global profile.
Defaults to true.
Example configuration:
```yaml
allow_per_room_profiles: false
```
---
Config option: `max_avatar_size`
The largest permissible file size in bytes for a user avatar. Defaults to no restriction.
Use M for MB and K for KB.
Note that user avatar changes will not work if this is set without using Synapse's media repository.
Example configuration:
```yaml
max_avatar_size: 10M
```
---
Config option: `allowed_avatar_mimetypes`
The MIME types allowed for user avatars. Defaults to no restriction.
Note that user avatar changes will not work if this is set without
using Synapse's media repository.
Example configuration:
```yaml
allowed_avatar_mimetypes: ["image/png", "image/jpeg", "image/gif"]
```
---
Config option: `redaction_retention_period`
How long to keep redacted events in unredacted form in the database. After
this period redacted events get replaced with their redacted form in the DB.
Defaults to `7d`. Set to `null` to disable.
Example configuration:
```yaml
redaction_retention_period: 28d
```
---
Config option: `user_ips_max_age`
How long to track users' last seen time and IPs in the database.
Defaults to `28d`. Set to `null` to disable clearing out of old rows.
Example configuration:
```yaml
user_ips_max_age: 14d
```
---
Config option: `request_token_inhibit_3pid_errors`
Inhibits the `/requestToken` endpoints from returning an error that might leak
information about whether an e-mail address is in use or not on this
homeserver. Defaults to false.
Note that for some endpoints the error situation is the e-mail already being
used, and for others the error is entering the e-mail being unused.
If this option is enabled, instead of returning an error, these endpoints will
act as if no error happened and return a fake session ID ('sid') to clients.
Example configuration:
```yaml
request_token_inhibit_3pid_errors: true
```
---
Config option: `next_link_domain_whitelist`
A list of domains that the domain portion of `next_link` parameters
must match.
This parameter is optionally provided by clients while requesting
validation of an email or phone number, and maps to a link that
users will be automatically redirected to after validation
succeeds. Clients can make use this parameter to aid the validation
process.
The whitelist is applied whether the homeserver or an identity server is handling validation.
The default value is no whitelist functionality; all domains are
allowed. Setting this value to an empty list will instead disallow
all domains.
Example configuration:
```yaml
next_link_domain_whitelist: ["matrix.org"]
```
---
Config option: `templates` and `custom_template_directory`
These options define templates to use when generating email or HTML page contents.
The `custom_template_directory` determines which directory Synapse will try to
find template files in to use to generate email or HTML page contents.
If not set, or a file is not found within the template directory, a default
template from within the Synapse package will be used.
See [here](../../templates.md) for more
information about using custom templates.
Example configuration:
```yaml
templates:
custom_template_directory: /path/to/custom/templates/
```
---
Config option: `retention`
This option and the associated options determine message retention policy at the
server level.
Room admins and mods can define a retention period for their rooms using the
`m.room.retention` state event, and server admins can cap this period by setting
the `allowed_lifetime_min` and `allowed_lifetime_max` config options.
If this feature is enabled, Synapse will regularly look for and purge events
which are older than the room's maximum retention period. Synapse will also
filter events received over federation so that events that should have been
purged are ignored and not stored again.
The message retention policies feature is disabled by default.
This setting has the following sub-options:
* `default_policy`: Default retention policy. If set, Synapse will apply it to rooms that lack the
'm.room.retention' state event. This option is further specified by the
`min_lifetime` and `max_lifetime` sub-options associated with it. Note that the
value of `min_lifetime` doesn't matter much because Synapse doesn't take it into account yet.
* `allowed_lifetime_min` and `allowed_lifetime_max`: Retention policy limits. If
set, and the state of a room contains a `m.room.retention` event in its state
which contains a `min_lifetime` or a `max_lifetime` that's out of these bounds,
Synapse will cap the room's policy to these limits when running purge jobs.
* `purge_jobs` and the associated `shortest_max_lifetime` and `longest_max_lifetime` sub-options:
Server admins can define the settings of the background jobs purging the
events whose lifetime has expired under the `purge_jobs` section.
If no configuration is provided for this option, a single job will be set up to delete
expired events in every room daily.
Each job's configuration defines which range of message lifetimes the job
takes care of. For example, if `shortest_max_lifetime` is '2d' and
`longest_max_lifetime` is '3d', the job will handle purging expired events in
rooms whose state defines a `max_lifetime` that's both higher than 2 days, and
lower than or equal to 3 days. Both the minimum and the maximum value of a
range are optional, e.g. a job with no `shortest_max_lifetime` and a
`longest_max_lifetime` of '3d' will handle every room with a retention policy
whose `max_lifetime` is lower than or equal to three days.
The rationale for this per-job configuration is that some rooms might have a
retention policy with a low `max_lifetime`, where history needs to be purged
of outdated messages on a more frequent basis than for the rest of the rooms
(e.g. every 12h), but not want that purge to be performed by a job that's
iterating over every room it knows, which could be heavy on the server.
If any purge job is configured, it is strongly recommended to have at least
a single job with neither `shortest_max_lifetime` nor `longest_max_lifetime`
set, or one job without `shortest_max_lifetime` and one job without
`longest_max_lifetime` set. Otherwise some rooms might be ignored, even if
`allowed_lifetime_min` and `allowed_lifetime_max` are set, because capping a
room's policy to these values is done after the policies are retrieved from
Synapse's database (which is done using the range specified in a purge job's
configuration).
Example configuration:
```yaml
retention:
enabled: true
default_policy:
min_lifetime: 1d
max_lifetime: 1y
allowed_lifetime_min: 1d
allowed_lifetime_max: 1y
purge_jobs:
- longest_max_lifetime: 3d
interval: 12h
- shortest_max_lifetime: 3d
interval: 1d
```
---
## TLS ##
Options related to TLS.
---
Config option: `tls_certificate_path`
This option specifies a PEM-encoded X509 certificate for TLS.
This certificate, as of Synapse 1.0, will need to be a valid and verifiable
certificate, signed by a recognised Certificate Authority. Defaults to none.
Be sure to use a `.pem` file that includes the full certificate chain including
any intermediate certificates (for instance, if using certbot, use
`fullchain.pem` as your certificate, not `cert.pem`).
Example configuration:
```yaml
tls_certificate_path: "CONFDIR/SERVERNAME.tls.crt"
```
---
Config option: `tls_private_key_path`
PEM-encoded private key for TLS. Defaults to none.
Example configuration:
```yaml
tls_private_key_path: "CONFDIR/SERVERNAME.tls.key"
```
---
Config option: `federation_verify_certificates`
Whether to verify TLS server certificates for outbound federation requests.
Defaults to true. To disable certificate verification, set the option to false.
Example configuration:
```yaml
federation_verify_certificates: false
```
---
Config option: `federation_client_minimum_tls_version`
The minimum TLS version that will be used for outbound federation requests.
Defaults to `1`. Configurable to `1`, `1.1`, `1.2`, or `1.3`. Note
that setting this value higher than `1.2` will prevent federation to most
of the public Matrix network: only configure it to `1.3` if you have an
entirely private federation setup and you can ensure TLS 1.3 support.
Example configuration:
```yaml
federation_client_minimum_tls_version: 1.2
```
---
Config option: `federation_certificate_verification_whitelist`
Skip federation certificate verification on a given whitelist
of domains.
This setting should only be used in very specific cases, such as
federation over Tor hidden services and similar. For private networks
of homeservers, you likely want to use a private CA instead.
Only effective if `federation_verify_certicates` is `true`.
Example configuration:
```yaml
federation_certificate_verification_whitelist:
- lon.example.com
- "*.domain.com"
- "*.onion"
```
---
Config option: `federation_custom_ca_list`
List of custom certificate authorities for federation traffic.
This setting should only normally be used within a private network of
homeservers.
Note that this list will replace those that are provided by your
operating environment. Certificates must be in PEM format.
Example configuration:
```yaml
federation_custom_ca_list:
- myCA1.pem
- myCA2.pem
- myCA3.pem
```
---
## Federation ##
Options related to federation.
---
Config option: `federation_domain_whitelist`
Restrict federation to the given whitelist of domains.
N.B. we recommend also firewalling your federation listener to limit
inbound federation traffic as early as possible, rather than relying
purely on this application-layer restriction. If not specified, the
default is to whitelist everything.
Example configuration:
```yaml
federation_domain_whitelist:
- lon.example.com
- nyc.example.com
- syd.example.com
```
---
Config option: `federation_metrics_domains`
Report prometheus metrics on the age of PDUs being sent to and received from
the given domains. This can be used to give an idea of "delay" on inbound
and outbound federation, though be aware that any delay can be due to problems
at either end or with the intermediate network.
By default, no domains are monitored in this way.
Example configuration:
```yaml
federation_metrics_domains:
- matrix.org
- example.com
```
---
Config option: `allow_profile_lookup_over_federation`
Set to false to disable profile lookup over federation. By default, the
Federation API allows other homeservers to obtain profile data of any user
on this homeserver.
Example configuration:
```yaml
allow_profile_lookup_over_federation: false
```
---
Config option: `allow_device_name_lookup_over_federation`
Set this option to true to allow device display name lookup over federation. By default, the
Federation API prevents other homeservers from obtaining the display names of any user devices
on this homeserver.
Example configuration:
```yaml
allow_device_name_lookup_over_federation: true
```
---
## Caching ##
Options related to caching
---
Config option: `event_cache_size`
The number of events to cache in memory. Not affected by
`caches.global_factor`. Defaults to 10K.
Example configuration:
```yaml
event_cache_size: 15K
```
---
Config option: `cache` and associated values
A cache 'factor' is a multiplier that can be applied to each of
Synapse's caches in order to increase or decrease the maximum
number of entries that can be stored.
Caching can be configured through the following sub-options:
* `global_factor`: Controls the global cache factor, which is the default cache factor
for all caches if a specific factor for that cache is not otherwise
set.
This can also be set by the `SYNAPSE_CACHE_FACTOR` environment
variable. Setting by environment variable takes priority over
setting through the config file.
Defaults to 0.5, which will halve the size of all caches.
* `per_cache_factors`: A dictionary of cache name to cache factor for that individual
cache. Overrides the global cache factor for a given cache.
These can also be set through environment variables comprised
of `SYNAPSE_CACHE_FACTOR_` + the name of the cache in capital
letters and underscores. Setting by environment variable
takes priority over setting through the config file.
Ex. `SYNAPSE_CACHE_FACTOR_GET_USERS_WHO_SHARE_ROOM_WITH_USER=2.0`
Some caches have '*' and other characters that are not
alphanumeric or underscores. These caches can be named with or
without the special characters stripped. For example, to specify
the cache factor for `*stateGroupCache*` via an environment
variable would be `SYNAPSE_CACHE_FACTOR_STATEGROUPCACHE=2.0`.
* `expire_caches`: Controls whether cache entries are evicted after a specified time
period. Defaults to true. Set to false to disable this feature. Note that never expiring
caches may result in excessive memory usage.
* `cache_entry_ttl`: If `expire_caches` is enabled, this flag controls how long an entry can
be in a cache without having been accessed before being evicted.
Defaults to 30m.
* `sync_response_cache_duration`: Controls how long the results of a /sync request are
cached for after a successful response is returned. A higher duration can help clients
with intermittent connections, at the cost of higher memory usage.
By default, this is zero, which means that sync responses are not cached
at all.
Example configuration:
```yaml
caches:
global_factor: 1.0
per_cache_factors:
get_users_who_share_room_with_user: 2.0
expire_caches: false
sync_response_cache_duration: 2m
```
### Reloading cache factors
The cache factors (i.e. `caches.global_factor` and `caches.per_cache_factors`) may be reloaded at any time by sending a
[`SIGHUP`](https://en.wikipedia.org/wiki/SIGHUP) signal to Synapse using e.g.
```commandline
kill -HUP [PID_OF_SYNAPSE_PROCESS]
```
If you are running multiple workers, you must individually update the worker
config file and send this signal to each worker process.
If you're using the [example systemd service](https://github.com/matrix-org/synapse/blob/develop/contrib/systemd/matrix-synapse.service)
file in Synapse's `contrib` directory, you can send a `SIGHUP` signal by using
`systemctl reload matrix-synapse`.
---
## Database ##
Config options related to database settings.
---
Config option: `database`
The `database` setting defines the database that synapse uses to store all of
its data.
Associated sub-options:
* `name`: this option specifies the database engine to use: either `sqlite3` (for SQLite)
or `psycopg2` (for PostgreSQL). If no name is specified Synapse will default to SQLite.
* `txn_limit` gives the maximum number of transactions to run per connection
before reconnecting. Defaults to 0, which means no limit.
* `allow_unsafe_locale` is an option specific to Postgres. Under the default behavior, Synapse will refuse to
start if the postgres db is set to a non-C locale. You can override this behavior (which is *not* recommended)
by setting `allow_unsafe_locale` to true. Note that doing so may corrupt your database. You can find more information
[here](../../postgres.md#fixing-incorrect-collate-or-ctype) and [here](https://wiki.postgresql.org/wiki/Locale_data_changes).
* `args` gives options which are passed through to the database engine,
except for options starting with `cp_`, which are used to configure the Twisted
connection pool. For a reference to valid arguments, see:
* for [sqlite](https://docs.python.org/3/library/sqlite3.html#sqlite3.connect)
* for [postgres](https://www.postgresql.org/docs/current/libpq-connect.html#LIBPQ-PARAMKEYWORDS)
* for [the connection pool](https://twistedmatrix.com/documents/current/api/twisted.enterprise.adbapi.ConnectionPool.html#__init__)
For more information on using Synapse with Postgres,
see [here](../../postgres.md).
Example SQLite configuration:
```
database:
name: sqlite3
args:
database: /path/to/homeserver.db
```
Example Postgres configuration:
```
database:
name: psycopg2
txn_limit: 10000
args:
user: synapse_user
password: secretpassword
database: synapse
host: localhost
port: 5432
cp_min: 5
cp_max: 10
```
---
## Logging ##
Config options related to logging.
---
Config option: `log_config`
This option specifies a yaml python logging config file as described [here](https://docs.python.org/3.7/library/logging.config.html#configuration-dictionary-schema).
Example configuration:
```yaml
log_config: "CONFDIR/SERVERNAME.log.config"
```
---
## Ratelimiting ##
Options related to ratelimiting in Synapse.
Each ratelimiting configuration is made of two parameters:
- `per_second`: number of requests a client can send per second.
- `burst_count`: number of requests a client can send before being throttled.
---
Config option: `rc_message`
Ratelimiting settings for client messaging.
This is a ratelimiting option for messages that ratelimits sending based on the account the client
is using. It defaults to: `per_second: 0.2`, `burst_count: 10`.
Example configuration:
```yaml
rc_message:
per_second: 0.5
burst_count: 15
```
---
Config option: `rc_registration`
This option ratelimits registration requests based on the client's IP address.
It defaults to `per_second: 0.17`, `burst_count: 3`.
Example configuration:
```yaml
rc_registration:
per_second: 0.15
burst_count: 2
```
---
Config option: `rc_registration_token_validity`
This option checks the validity of registration tokens that ratelimits requests based on
the client's IP address.
Defaults to `per_second: 0.1`, `burst_count: 5`.
Example configuration:
```yaml
rc_registration_token_validity:
per_second: 0.3
burst_count: 6
```
---
Config option: `rc_login`
This option specifies several limits for login:
* `address` ratelimits login requests based on the client's IP
address. Defaults to `per_second: 0.17`, `burst_count: 3`.
* `account` ratelimits login requests based on the account the
client is attempting to log into. Defaults to `per_second: 0.17`,
`burst_count: 3`.
* `failted_attempts` ratelimits login requests based on the account the
client is attempting to log into, based on the amount of failed login
attempts for this account. Defaults to `per_second: 0.17`, `burst_count: 3`.
Example configuration:
```yaml
rc_login:
address:
per_second: 0.15
burst_count: 5
account:
per_second: 0.18
burst_count: 4
failed_attempts:
per_second: 0.19
burst_count: 7
```
---
Config option: `rc_admin_redaction`
This option sets ratelimiting redactions by room admins. If this is not explicitly
set then it uses the same ratelimiting as per `rc_message`. This is useful
to allow room admins to deal with abuse quickly.
Example configuration:
```yaml
rc_admin_redaction:
per_second: 1
burst_count: 50
```
---
Config option: `rc_joins`
This option allows for ratelimiting number of rooms a user can join. This setting has the following sub-options:
* `local`: ratelimits when users are joining rooms the server is already in.
Defaults to `per_second: 0.1`, `burst_count: 10`.
* `remote`: ratelimits when users are trying to join rooms not on the server (which
can be more computationally expensive than restricting locally). Defaults to
`per_second: 0.01`, `burst_count: 10`
Example configuration:
```yaml
rc_joins:
local:
per_second: 0.2
burst_count: 15
remote:
per_second: 0.03
burst_count: 12
```
---
Config option: `rc_3pid_validation`
This option ratelimits how often a user or IP can attempt to validate a 3PID.
Defaults to `per_second: 0.003`, `burst_count: 5`.
Example configuration:
```yaml
rc_3pid_validation:
per_second: 0.003
burst_count: 5
```
---
Config option: `rc_invites`
This option sets ratelimiting how often invites can be sent in a room or to a
specific user. `per_room` defaults to `per_second: 0.3`, `burst_count: 10` and
`per_user` defaults to `per_second: 0.003`, `burst_count: 5`.
Example configuration:
```yaml
rc_invites:
per_room:
per_second: 0.5
burst_count: 5
per_user:
per_second: 0.004
burst_count: 3
```
---
Config option: `rc_third_party_invite`
This option ratelimits 3PID invites (i.e. invites sent to a third-party ID
such as an email address or a phone number) based on the account that's
sending the invite. Defaults to `per_second: 0.2`, `burst_count: 10`.
Example configuration:
```yaml
rc_third_party_invite:
per_second: 0.2
burst_count: 10
```
---
Config option: `rc_federation`
Defines limits on federation requests.
The `rc_federation` configuration has the following sub-options:
* `window_size`: window size in milliseconds. Defaults to 1000.
* `sleep_limit`: number of federation requests from a single server in
a window before the server will delay processing the request. Defaults to 10.
* `sleep_delay`: duration in milliseconds to delay processing events
from remote servers by if they go over the sleep limit. Defaults to 500.
* `reject_limit`: maximum number of concurrent federation requests
allowed from a single server. Defaults to 50.
* `concurrent`: number of federation requests to concurrently process
from a single server. Defaults to 3.
Example configuration:
```yaml
rc_federation:
window_size: 750
sleep_limit: 15
sleep_delay: 400
reject_limit: 40
concurrent: 5
```
---
Config option: `federation_rr_transactions_per_room_per_second`
Sets outgoing federation transaction frequency for sending read-receipts,
per-room.
If we end up trying to send out more read-receipts, they will get buffered up
into fewer transactions. Defaults to 50.
Example configuration:
```yaml
federation_rr_transactions_per_room_per_second: 40
```
---
## Media Store ##
Config options relating to Synapse media store.
---
Config option: `enable_media_repo`
Enable the media store service in the Synapse master. Defaults to true.
Set to false if you are using a separate media store worker.
Example configuration:
```yaml
enable_media_repo: false
```
---
Config option: `media_store_path`
Directory where uploaded images and attachments are stored.
Example configuration:
```yaml
media_store_path: "DATADIR/media_store"
```
---
Config option: `media_storage_providers`
Media storage providers allow media to be stored in different
locations. Defaults to none. Associated sub-options are:
* `module`: type of resource, e.g. `file_system`.
* `store_local`: whether to store newly uploaded local files
* `store_remote`: whether to store newly downloaded local files
* `store_synchronous`: whether to wait for successful storage for local uploads
* `config`: sets a path to the resource through the `directory` option
Example configuration:
```yaml
media_storage_providers:
- module: file_system
store_local: false
store_remote: false
store_synchronous: false
config:
directory: /mnt/some/other/directory
```
---
Config option: `max_upload_size`
The largest allowed upload size in bytes.
If you are using a reverse proxy you may also need to set this value in
your reverse proxy's config. Defaults to 50M. Notably Nginx has a small max body size by default.
See [here](../../reverse_proxy.md) for more on using a reverse proxy with Synapse.
Example configuration:
```yaml
max_upload_size: 60M
```
---
Config option: `max_image_pixels`
Maximum number of pixels that will be thumbnailed. Defaults to 32M.
Example configuration:
```yaml
max_image_pixels: 35M
```
---
Config option: `dynamic_thumbnails`
Whether to generate new thumbnails on the fly to precisely match
the resolution requested by the client. If true then whenever
a new resolution is requested by the client the server will
generate a new thumbnail. If false the server will pick a thumbnail
from a precalculated list. Defaults to false.
Example configuration:
```yaml
dynamic_thumbnails: true
```
---
Config option: `thumbnail_sizes`
List of thumbnails to precalculate when an image is uploaded. Associated sub-options are:
* `width`
* `height`
* `method`: i.e. `crop`, `scale`, etc.
Example configuration:
```yaml
thumbnail_sizes:
- width: 32
height: 32
method: crop
- width: 96
height: 96
method: crop
- width: 320
height: 240
method: scale
- width: 640
height: 480
method: scale
- width: 800
height: 600
method: scale
```
Config option: `url_preview_enabled`
This setting determines whether the preview URL API is enabled.
It is disabled by default. Set to true to enable. If enabled you must specify a
`url_preview_ip_range_blacklist` blacklist.
Example configuration:
```yaml
url_preview_enabled: true
```
---
Config option: `url_preview_ip_range_blacklist`
List of IP address CIDR ranges that the URL preview spider is denied
from accessing. There are no defaults: you must explicitly
specify a list for URL previewing to work. You should specify any
internal services in your network that you do not want synapse to try
to connect to, otherwise anyone in any Matrix room could cause your
synapse to issue arbitrary GET requests to your internal services,
causing serious security issues.
(0.0.0.0 and :: are always blacklisted, whether or not they are explicitly
listed here, since they correspond to unroutable addresses.)
This must be specified if `url_preview_enabled` is set. It is recommended that
you use the following example list as a starting point.
Note: The value is ignored when an HTTP proxy is in use.
Example configuration:
```yaml
url_preview_ip_range_blacklist:
- '127.0.0.0/8'
- '10.0.0.0/8'
- '172.16.0.0/12'
- '192.168.0.0/16'
- '100.64.0.0/10'
- '192.0.0.0/24'
- '169.254.0.0/16'
- '192.88.99.0/24'
- '198.18.0.0/15'
- '192.0.2.0/24'
- '198.51.100.0/24'
- '203.0.113.0/24'
- '224.0.0.0/4'
- '::1/128'
- 'fe80::/10'
- 'fc00::/7'
- '2001:db8::/32'
- 'ff00::/8'
- 'fec0::/10'
```
----
Config option: `url_preview_ip_range_whitelist`
This option sets a list of IP address CIDR ranges that the URL preview spider is allowed
to access even if they are specified in `url_preview_ip_range_blacklist`.
This is useful for specifying exceptions to wide-ranging blacklisted
target IP ranges - e.g. for enabling URL previews for a specific private
website only visible in your network. Defaults to none.
Example configuration:
```yaml
url_preview_ip_range_whitelist:
- '192.168.1.1'
```
---
Config option: `url_preview_url_blacklist`
Optional list of URL matches that the URL preview spider is
denied from accessing. You should use `url_preview_ip_range_blacklist`
in preference to this, otherwise someone could define a public DNS
entry that points to a private IP address and circumvent the blacklist.
This is more useful if you know there is an entire shape of URL that
you know that will never want synapse to try to spider.
Each list entry is a dictionary of url component attributes as returned
by urlparse.urlsplit as applied to the absolute form of the URL. See
[here](https://docs.python.org/2/library/urlparse.html#urlparse.urlsplit) for more
information. Some examples are:
* `username`
* `netloc`
* `scheme`
* `path`
The values of the dictionary are treated as a filename match pattern
applied to that component of URLs, unless they start with a ^ in which
case they are treated as a regular expression match. If all the
specified component matches for a given list item succeed, the URL is
blacklisted.
Example configuration:
```yaml
url_preview_url_blacklist:
# blacklist any URL with a username in its URI
- username: '*'
# blacklist all *.google.com URLs
- netloc: 'google.com'
- netloc: '*.google.com'
# blacklist all plain HTTP URLs
- scheme: 'http'
# blacklist http(s)://www.acme.com/foo
- netloc: 'www.acme.com'
path: '/foo'
# blacklist any URL with a literal IPv4 address
- netloc: '^[0-9]+\.[0-9]+\.[0-9]+\.[0-9]+$'
```
---
Config option: `max_spider_size`
The largest allowed URL preview spidering size in bytes. Defaults to 10M.
Example configuration:
```yaml
max_spider_size: 8M
```
---
Config option: `url_preview_language`
A list of values for the Accept-Language HTTP header used when
downloading webpages during URL preview generation. This allows
Synapse to specify the preferred languages that URL previews should
be in when communicating with remote servers.
Each value is a IETF language tag; a 2-3 letter identifier for a
language, optionally followed by subtags separated by '-', specifying
a country or region variant.
Multiple values can be provided, and a weight can be added to each by
using quality value syntax (;q=). '*' translates to any language.
Defaults to "en".
Example configuration:
```yaml
url_preview_accept_language:
- en-UK
- en-US;q=0.9
- fr;q=0.8
- *;q=0.7
```
----
Config option: `oembed`
oEmbed allows for easier embedding content from a website. It can be
used for generating URLs previews of services which support it. A default list of oEmbed providers
is included with Synapse. Set `disable_default_providers` to true to disable using
these default oEmbed URLs. Use `additional_providers` to specify additional files with oEmbed configuration (each
should be in the form of providers.json). By default this list is empty.
Example configuration:
```yaml
oembed:
disable_default_providers: true
additional_providers:
- oembed/my_providers.json
```
---
## Captcha ##
See [here](../../CAPTCHA_SETUP.md) for full details on setting up captcha.
---
Config option: `recaptcha_public_key`
This homeserver's ReCAPTCHA public key. Must be specified if `enable_registration_captcha` is
enabled.
Example configuration:
```yaml
recaptcha_public_key: "YOUR_PUBLIC_KEY"
```
---
Config option: `recaptcha_private_key`
This homeserver's ReCAPTCHA private key. Must be specified if `enable_registration_captcha` is
enabled.
Example configuration:
```yaml
recaptcha_private_key: "YOUR_PRIVATE_KEY"
```
---
Config option: `enable_registration_captcha`
Set to true to enable ReCaptcha checks when registering, preventing signup
unless a captcha is answered. Requires a valid ReCaptcha public/private key.
Defaults to false.
Example configuration:
```yaml
enable_registration_captcha: true
```
---
Config option: `recaptcha_siteverify_api`
The API endpoint to use for verifying `m.login.recaptcha` responses.
Defaults to `https://www.recaptcha.net/recaptcha/api/siteverify`.
Example configuration:
```yaml
recaptcha_siteverify_api: "https://my.recaptcha.site"
```
---
## TURN ##
Options related to adding a TURN server to Synapse.
---
Config option: `turn_uris`
The public URIs of the TURN server to give to clients.
Example configuration:
```yaml
turn_uris: [turn:example.org]
```
---
Config option: `turn_shared_secret`
The shared secret used to compute passwords for the TURN server.
Example configuration:
```yaml
turn_shared_secret: "YOUR_SHARED_SECRET"
```
----
Config options: `turn_username` and `turn_password`
The Username and password if the TURN server needs them and does not use a token.
Example configuration:
```yaml
turn_username: "TURNSERVER_USERNAME"
turn_password: "TURNSERVER_PASSWORD"
```
---
Config option: `turn_user_lifetime`
How long generated TURN credentials last. Defaults to 1h.
Example configuration:
```yaml
turn_user_lifetime: 2h
```
---
Config option: `turn_allow_guests`
Whether guests should be allowed to use the TURN server. This defaults to true, otherwise
VoIP will be unreliable for guests. However, it does introduce a slight security risk as
it allows users to connect to arbitrary endpoints without having first signed up for a valid account (e.g. by passing a CAPTCHA).
Example configuration:
```yaml
turn_allow_guests: false
```
---
## Registration ##
Registration can be rate-limited using the parameters in the [Ratelimiting](#ratelimiting) section of this manual.
---
Config option: `enable_registration`
Enable registration for new users. Defaults to false. It is highly recommended that if you enable registration,
you use either captcha, email, or token-based verification to verify that new users are not bots. In order to enable registration
without any verification, you must also set `enable_registration_without_verification` to true.
Example configuration:
```yaml
enable_registration: true
```
---
Config option: `enable_registration_without_verification`
Enable registration without email or captcha verification. Note: this option is *not* recommended,
as registration without verification is a known vector for spam and abuse. Defaults to false. Has no effect
unless `enable_registration` is also enabled.
Example configuration:
```yaml
enable_registration_without_verification: true
```
---
Config option: `session_lifetime`
Time that a user's session remains valid for, after they log in.
Note that this is not currently compatible with guest logins.
Note also that this is calculated at login time: changes are not applied retrospectively to users who have already
logged in.
By default, this is infinite.
Example configuration:
```yaml
session_lifetime: 24h
```
----
Config option: `refresh_access_token_lifetime`
Time that an access token remains valid for, if the session is using refresh tokens.
For more information about refresh tokens, please see the [manual](user_authentication/refresh_tokens.md).
Note that this only applies to clients which advertise support for refresh tokens.
Note also that this is calculated at login time and refresh time: changes are not applied to
existing sessions until they are refreshed.
By default, this is 5 minutes.
Example configuration:
```yaml
refreshable_access_token_lifetime: 10m
```
---
Config option: `refresh_token_lifetime: 24h`
Time that a refresh token remains valid for (provided that it is not
exchanged for another one first).
This option can be used to automatically log-out inactive sessions.
Please see the manual for more information.
Note also that this is calculated at login time and refresh time:
changes are not applied to existing sessions until they are refreshed.
By default, this is infinite.
Example configuration:
```yaml
refresh_token_lifetime: 24h
```
---
Config option: `nonrefreshable_access_token_lifetime`
Time that an access token remains valid for, if the session is NOT
using refresh tokens.
Please note that not all clients support refresh tokens, so setting
this to a short value may be inconvenient for some users who will
then be logged out frequently.
Note also that this is calculated at login time: changes are not applied
retrospectively to existing sessions for users that have already logged in.
By default, this is infinite.
Example configuration:
```yaml
nonrefreshable_access_token_lifetime: 24h
```
---
Config option: `registrations_require_3pid`
If this is set, the user must provide all of the specified types of 3PID when registering.
Example configuration:
```yaml
registrations_require_3pid:
- email
- msisdn
```
---
Config option: `disable_msisdn_registration`
Explicitly disable asking for MSISDNs from the registration
flow (overrides `registrations_require_3pid` if MSISDNs are set as required).
Example configuration:
```yaml
disable_msisdn_registration: true
```
---
Config option: `allowed_local_3pids`
Mandate that users are only allowed to associate certain formats of
3PIDs with accounts on this server, as specified by the `medium` and `pattern` sub-options.
Example configuration:
```yaml
allowed_local_3pids:
- medium: email
pattern: '^[^@]+@matrix\.org$'
- medium: email
pattern: '^[^@]+@vector\.im$'
- medium: msisdn
pattern: '\+44'
```
---
Config option: `enable_3pid_lookup`
Enable 3PIDs lookup requests to identity servers from this server. Defaults to true.
Example configuration:
```yaml
enable_3pid_lookup: false
```
---
Config option: `registration_requires_token`
Require users to submit a token during registration.
Tokens can be managed using the admin [API](../administration/admin_api/registration_tokens.md).
Note that `enable_registration` must be set to true.
Disabling this option will not delete any tokens previously generated.
Defaults to false. Set to true to enable.
Example configuration:
```yaml
registration_requires_token: true
```
---
Config option: `registration_shared_secret`
If set, allows registration of standard or admin accounts by anyone who
has the shared secret, even if registration is otherwise disabled.
Example configuration:
```yaml
registration_shared_secret: <PRIVATE STRING>
```
---
Config option: `bcrypt_rounds`
Set the number of bcrypt rounds used to generate password hash.
Larger numbers increase the work factor needed to generate the hash.
The default number is 12 (which equates to 2^12 rounds).
N.B. that increasing this will exponentially increase the time required
to register or login - e.g. 24 => 2^24 rounds which will take >20 mins.
Example configuration:
```yaml
bcrypt_rounds: 14
```
---
Config option: `allow_guest_access`
Allows users to register as guests without a password/email/etc, and
participate in rooms hosted on this server which have been made
accessible to anonymous users. Defaults to false.
Example configuration:
```yaml
allow_guest_access: true
```
---
Config option: `default_identity_server`
The identity server which we suggest that clients should use when users log
in on this server.
(By default, no suggestion is made, so it is left up to the client.
This setting is ignored unless `public_baseurl` is also explicitly set.)
Example configuration:
```yaml
default_identity_server: https://matrix.org
```
---
Config option: `account_threepid_delegates`
Handle threepid (email/phone etc) registration and password resets through a set of
*trusted* identity servers. Note that this allows the configured identity server to
reset passwords for accounts!
Be aware that if `email` is not set, and SMTP options have not been
configured in the email config block, registration and user password resets via
email will be globally disabled.
Additionally, if `msisdn` is not set, registration and password resets via msisdn
will be disabled regardless, and users will not be able to associate an msisdn
identifier to their account. This is due to Synapse currently not supporting
any method of sending SMS messages on its own.
To enable using an identity server for operations regarding a particular third-party
identifier type, set the value to the URL of that identity server as shown in the
examples below.
Servers handling the these requests must answer the `/requestToken` endpoints defined
by the Matrix Identity Service API [specification](https://matrix.org/docs/spec/identity_service/latest).
Example configuration:
```yaml
account_threepid_delegates:
email: https://example.com # Delegate email sending to example.com
msisdn: http://localhost:8090 # Delegate SMS sending to this local process
```
---
Config option: `enable_set_displayname`
Whether users are allowed to change their displayname after it has
been initially set. Useful when provisioning users based on the
contents of a third-party directory.
Does not apply to server administrators. Defaults to true.
Example configuration:
```yaml
enable_set_displayname: false
```
---
Config option: `enable_set_avatar_url`
Whether users are allowed to change their avatar after it has been
initially set. Useful when provisioning users based on the contents
of a third-party directory.
Does not apply to server administrators. Defaults to true.
Example configuration:
```yaml
enable_set_avatar_url: false
```
---
Config option: `enable_3pid_changes`
Whether users can change the third-party IDs associated with their accounts
(email address and msisdn).
Defaults to true.
Example configuration:
```yaml
enable_3pid_changes: false
```
---
Config option: `auto_join_rooms`
Users who register on this homeserver will automatically be joined
to the rooms listed under this option.
By default, any room aliases included in this list will be created
as a publicly joinable room when the first user registers for the
homeserver. If the room already exists, make certain it is a publicly joinable
room, i.e. the join rule of the room must be set to 'public'. You can find more options
relating to auto-joining rooms below.
Example configuration:
```yaml
auto_join_rooms:
- "#exampleroom:example.com"
- "#anotherexampleroom:example.com"
```
---
Config option: `autocreate_auto_join_rooms`
Where `auto_join_rooms` are specified, setting this flag ensures that
the rooms exist by creating them when the first user on the
homeserver registers.
By default the auto-created rooms are publicly joinable from any federated
server. Use the `autocreate_auto_join_rooms_federated` and
`autocreate_auto_join_room_preset` settings to customise this behaviour.
Setting to false means that if the rooms are not manually created,
users cannot be auto-joined since they do not exist.
Defaults to true.
Example configuration:
```yaml
autocreate_auto_join_rooms: false
```
---
Config option: `autocreate_auto_join_rooms_federated`
Whether the rooms listen in `auto_join_rooms` that are auto-created are available
via federation. Only has an effect if `autocreate_auto_join_rooms` is true.
Note that whether a room is federated cannot be modified after
creation.
Defaults to true: the room will be joinable from other servers.
Set to false to prevent users from other homeservers from
joining these rooms.
Example configuration:
```yaml
autocreate_auto_join_rooms_federated: false
```
---
Config option: `autocreate_auto_join_room_preset`
The room preset to use when auto-creating one of `auto_join_rooms`. Only has an
effect if `autocreate_auto_join_rooms` is true.
Possible values for this option are:
* "public_chat": the room is joinable by anyone, including
federated servers if `autocreate_auto_join_rooms_federated` is true (the default).
* "private_chat": an invitation is required to join these rooms.
* "trusted_private_chat": an invitation is required to join this room and the invitee is
assigned a power level of 100 upon joining the room.
If a value of "private_chat" or "trusted_private_chat" is used then
`auto_join_mxid_localpart` must also be configured.
Defaults to "public_chat".
Example configuration:
```yaml
autocreate_auto_join_room_preset: private_chat
```
---
Config option: `auto_join_mxid_localpart`
The local part of the user id which is used to create `auto_join_rooms` if
`autocreate_auto_join_rooms` is true. If this is not provided then the
initial user account that registers will be used to create the rooms.
The user id is also used to invite new users to any auto-join rooms which
are set to invite-only.
It *must* be configured if `autocreate_auto_join_room_preset` is set to
"private_chat" or "trusted_private_chat".
Note that this must be specified in order for new users to be correctly
invited to any auto-join rooms which have been set to invite-only (either
at the time of creation or subsequently).
Note that, if the room already exists, this user must be joined and
have the appropriate permissions to invite new members.
Example configuration:
```yaml
auto_join_mxid_localpart: system
```
---
Config option: `auto_join_rooms_for_guests`
When `auto_join_rooms` is specified, setting this flag to false prevents
guest accounts from being automatically joined to the rooms.
Defaults to true.
Example configuration:
```yaml
auto_join_rooms_for_guests: false
```
---
Config option: `inhibit_user_in_use_error`
Whether to inhibit errors raised when registering a new account if the user ID
already exists. If turned on, requests to `/register/available` will always
show a user ID as available, and Synapse won't raise an error when starting
a registration with a user ID that already exists. However, Synapse will still
raise an error if the registration completes and the username conflicts.
Defaults to false.
Example configuration:
```yaml
inhibit_user_in_use_error: true
```
---
## Metrics ###
Config options related to metrics.
---
Config option: `enable_metrics`
Set to true to enable collection and rendering of performance metrics.
Defaults to false.
Example configuration:
```yaml
enable_metrics: true
```
---
Config option: `sentry`
Use this option to enable sentry integration. Provide the DSN assigned to you by sentry
with the `dsn` setting.
NOTE: While attempts are made to ensure that the logs don't contain
any sensitive information, this cannot be guaranteed. By enabling
this option the sentry server may therefore receive sensitive
information, and it in turn may then disseminate sensitive information
through insecure notification channels if so configured.
Example configuration:
```yaml
sentry:
dsn: "..."
```
---
Config option: `metrics_flags`
Flags to enable Prometheus metrics which are not suitable to be
enabled by default, either for performance reasons or limited use.
Currently the only option is `known_servers`, which publishes
`synapse_federation_known_servers`, a gauge of the number of
servers this homeserver knows about, including itself. May cause
performance problems on large homeservers.
Example configuration:
```yaml
metrics_flags:
known_servers: true
```
---
Config option: `report_stats`
Whether or not to report anonymized homeserver usage statistics. This is originally
set when generating the config. Set this option to true or false to change the current
behavior.
Example configuration:
```yaml
report_stats: true
```
---
Config option: `report_stats_endpoint`
The endpoint to report the anonymized homeserver usage statistics to.
Defaults to https://matrix.org/report-usage-stats/push
Example configuration:
```yaml
report_stats_endpoint: https://example.com/report-usage-stats/push
```
---
## API Configuration ##
Config settings related to the client/server API
---
Config option: `room_prejoin_state:`
Controls for the state that is shared with users who receive an invite
to a room. By default, the following state event types are shared with users who
receive invites to the room:
- m.room.join_rules
- m.room.canonical_alias
- m.room.avatar
- m.room.encryption
- m.room.name
- m.room.create
- m.room.topic
To change the default behavior, use the following sub-options:
* `disable_default_event_types`: set to true to disable the above defaults. If this
is enabled, only the event types listed in `additional_event_types` are shared.
Defaults to false.
* `additional_event_types`: Additional state event types to share with users when they are invited
to a room. By default, this list is empty (so only the default event types are shared).
Example configuration:
```yaml
room_prejoin_state:
disable_default_event_types: true
additional_event_types:
- org.example.custom.event.type
- m.room.join_rules
```
---
Config option: `track_puppeted_user_ips`
We record the IP address of clients used to access the API for various
reasons, including displaying it to the user in the "Where you're signed in"
dialog.
By default, when puppeting another user via the admin API, the client IP
address is recorded against the user who created the access token (ie, the
admin user), and *not* the puppeted user.
Set this option to true to also record the IP address against the puppeted
user. (This also means that the puppeted user will count as an "active" user
for the purpose of monthly active user tracking - see `limit_usage_by_mau` etc
above.)
Example configuration:
```yaml
track_puppeted_user_ips: true
```
---
Config option: `app_service_config_files`
A list of application service config files to use.
Example configuration:
```yaml
app_service_config_files:
- app_service_1.yaml
- app_service_2.yaml
```
---
Config option: `track_appservice_user_ips`
Defaults to false. Set to true to enable tracking of application service IP addresses.
Implicitly enables MAU tracking for application service users.
Example configuration:
```yaml
track_appservice_user_ips: true
```
---
Config option: `macaroon_secret_key`
A secret which is used to sign access tokens. If none is specified,
the `registration_shared_secret` is used, if one is given; otherwise,
a secret key is derived from the signing key.
Example configuration:
```yaml
macaroon_secret_key: <PRIVATE STRING>
```
---
Config option: `form_secret`
A secret which is used to calculate HMACs for form values, to stop
falsification of values. Must be specified for the User Consent
forms to work.
Example configuration:
```yaml
form_secret: <PRIVATE STRING>
```
---
## Signing Keys ##
Config options relating to signing keys
---
Config option: `signing_key_path`
Path to the signing key to sign messages with.
Example configuration:
```yaml
signing_key_path: "CONFDIR/SERVERNAME.signing.key"
```
---
Config option: `old_signing_keys`
The keys that the server used to sign messages with but won't use
to sign new messages. For each key, `key` should be the base64-encoded public key, and
`expired_ts`should be the time (in milliseconds since the unix epoch) that
it was last used.
It is possible to build an entry from an old `signing.key` file using the
`export_signing_key` script which is provided with synapse.
Example configuration:
```yaml
old_signing_keys:
"ed25519:id": { key: "base64string", expired_ts: 123456789123 }
```
---
Config option: `key_refresh_interval`
How long key response published by this server is valid for.
Used to set the `valid_until_ts` in `/key/v2` APIs.
Determines how quickly servers will query to check which keys
are still valid. Defaults to 1d.
Example configuration:
```yaml
key_refresh_interval: 2d
```
---
Config option: `trusted_key_servers:`
The trusted servers to download signing keys from.
When we need to fetch a signing key, each server is tried in parallel.
Normally, the connection to the key server is validated via TLS certificates.
Additional security can be provided by configuring a `verify key`, which
will make synapse check that the response is signed by that key.
This setting supercedes an older setting named `perspectives`. The old format
is still supported for backwards-compatibility, but it is deprecated.
`trusted_key_servers` defaults to matrix.org, but using it will generate a
warning on start-up. To suppress this warning, set
`suppress_key_server_warning` to true.
Options for each entry in the list include:
* `server_name`: the name of the server. Required.
* `verify_keys`: an optional map from key id to base64-encoded public key.
If specified, we will check that the response is signed by at least
one of the given keys.
* `accept_keys_insecurely`: a boolean. Normally, if `verify_keys` is unset,
and `federation_verify_certificates` is not `true`, synapse will refuse
to start, because this would allow anyone who can spoof DNS responses
to masquerade as the trusted key server. If you know what you are doing
and are sure that your network environment provides a secure connection
to the key server, you can set this to `true` to override this behaviour.
Example configuration #1:
```yaml
trusted_key_servers:
- server_name: "my_trusted_server.example.com"
verify_keys:
"ed25519:auto": "abcdefghijklmnopqrstuvwxyzabcdefghijklmopqr"
- server_name: "my_other_trusted_server.example.com"
```
Example configuration #2:
```yaml
trusted_key_servers:
- server_name: "matrix.org"
```
---
Config option: `suppress_key_server_warning`
Set the following to true to disable the warning that is emitted when the
`trusted_key_servers` include 'matrix.org'. See above.
Example configuration:
```yaml
suppress_key_server_warning: true
```
---
Config option: `key_server_signing_keys_path`
The signing keys to use when acting as a trusted key server. If not specified
defaults to the server signing key.
Can contain multiple keys, one per line.
Example configuration:
```yaml
key_server_signing_keys_path: "key_server_signing_keys.key"
```
---
## Single sign-on integration ##
The following settings can be used to make Synapse use a single sign-on
provider for authentication, instead of its internal password database.
You will probably also want to set the following options to false to
disable the regular login/registration flows:
* `enable_registration`
* `password_config.enabled`
You will also want to investigate the settings under the "sso" configuration
section below.
---
Config option: `saml2_config`
Enable SAML2 for registration and login. Uses pysaml2. To learn more about pysaml and
to find a full list options for configuring pysaml, read the docs [here](https://pysaml2.readthedocs.io/en/latest/).
At least one of `sp_config` or `config_path` must be set in this section to
enable SAML login. You can either put your entire pysaml config inline using the `sp_config`
option, or you can specify a path to a psyaml config file with the sub-option `config_path`.
This setting has the following sub-options:
* `sp_config`: the configuration for the pysaml2 Service Provider. See pysaml2 docs for format of config.
Default values will be used for the `entityid` and `service` settings,
so it is not normally necessary to specify them unless you need to
override them. Here are a few useful sub-options for configuring pysaml:
* `metadata`: Point this to the IdP's metadata. You must provide either a local
file via the `local` attribute or (preferably) a URL via the
`remote` attribute.
* `accepted_time_diff: 3`: Allowed clock difference in seconds between the homeserver and IdP.
Defaults to 0.
* `service`: By default, the user has to go to our login page first. If you'd like
to allow IdP-initiated login, set `allow_unsolicited` to true under `sp` in the `service`
section.
* `config_path`: specify a separate pysaml2 configuration file thusly:
`config_path: "CONFDIR/sp_conf.py"`
* `saml_session_lifetime`: The lifetime of a SAML session. This defines how long a user has to
complete the authentication process, if `allow_unsolicited` is unset. The default is 15 minutes.
* `user_mapping_provider`: Using this option, an external module can be provided as a
custom solution to mapping attributes returned from a saml provider onto a matrix user. The
`user_mapping_provider` has the following attributes:
* `module`: The custom module's class.
* `config`: Custom configuration values for the module. Use the values provided in the
example if you are using the built-in user_mapping_provider, or provide your own
config values for a custom class if you are using one. This section will be passed as a Python
dictionary to the module's `parse_config` method. The built-in provider takes the following two
options:
* `mxid_source_attribute`: The SAML attribute (after mapping via the attribute maps) to use
to derive the Matrix ID from. It is 'uid' by default. Note: This used to be configured by the
`saml2_config.mxid_source_attribute option`. If that is still defined, its value will be used instead.
* `mxid_mapping`: The mapping system to use for mapping the saml attribute onto a
matrix ID. Options include: `hexencode` (which maps unpermitted characters to '=xx')
and `dotreplace` (which replaces unpermitted characters with '.').
The default is `hexencode`. Note: This used to be configured by the
`saml2_config.mxid_mapping option`. If that is still defined, its value will be used instead.
* `grandfathered_mxid_source_attribute`: In previous versions of synapse, the mapping from SAML attribute to
MXID was always calculated dynamically rather than stored in a table. For backwards- compatibility, we will look for `user_ids`
matching such a pattern before creating a new account. This setting controls the SAML attribute which will be used for this
backwards-compatibility lookup. Typically it should be 'uid', but if the attribute maps are changed, it may be necessary to change it.
The default is 'uid'.
* `attribute_requirements`: It is possible to configure Synapse to only allow logins if SAML attributes
match particular values. The requirements can be listed under
`attribute_requirements` as shown in the example. All of the listed attributes must
match for the login to be permitted.
* `idp_entityid`: If the metadata XML contains multiple IdP entities then the `idp_entityid`
option must be set to the entity to redirect users to.
Most deployments only have a single IdP entity and so should omit this option.
Once SAML support is enabled, a metadata file will be exposed at
`https://<server>:<port>/_synapse/client/saml2/metadata.xml`, which you may be able to
use to configure your SAML IdP with. Alternatively, you can manually configure
the IdP to use an ACS location of
`https://<server>:<port>/_synapse/client/saml2/authn_response`.
Example configuration:
```yaml
saml2_config:
sp_config:
metadata:
local: ["saml2/idp.xml"]
remote:
- url: https://our_idp/metadata.xml
accepted_time_diff: 3
service:
sp:
allow_unsolicited: true
# The examples below are just used to generate our metadata xml, and you
# may well not need them, depending on your setup. Alternatively you
# may need a whole lot more detail - see the pysaml2 docs!
description: ["My awesome SP", "en"]
name: ["Test SP", "en"]
ui_info:
display_name:
- lang: en
text: "Display Name is the descriptive name of your service."
description:
- lang: en
text: "Description should be a short paragraph explaining the purpose of the service."
information_url:
- lang: en
text: "https://example.com/terms-of-service"
privacy_statement_url:
- lang: en
text: "https://example.com/privacy-policy"
keywords:
- lang: en
text: ["Matrix", "Element"]
logo:
- lang: en
text: "https://example.com/logo.svg"
width: "200"
height: "80"
organization:
name: Example com
display_name:
- ["Example co", "en"]
url: "http://example.com"
contact_person:
- given_name: Bob
sur_name: "the Sysadmin"
email_address": ["admin@example.com"]
contact_type": technical
saml_session_lifetime: 5m
user_mapping_provider:
# Below options are intended for the built-in provider, they should be
# changed if using a custom module.
config:
mxid_source_attribute: displayName
mxid_mapping: dotreplace
grandfathered_mxid_source_attribute: upn
attribute_requirements:
- attribute: userGroup
value: "staff"
- attribute: department
value: "sales"
idp_entityid: 'https://our_idp/entityid'
```
---
Config option: `oidc_providers`
List of OpenID Connect (OIDC) / OAuth 2.0 identity providers, for registration
and login. See [here](../../openid.md)
for information on how to configure these options.
For backwards compatibility, it is also possible to configure a single OIDC
provider via an `oidc_config` setting. This is now deprecated and admins are
advised to migrate to the `oidc_providers` format. (When doing that migration,
use `oidc` for the `idp_id` to ensure that existing users continue to be
recognised.)
Options for each entry include:
* `idp_id`: a unique identifier for this identity provider. Used internally
by Synapse; should be a single word such as 'github'.
Note that, if this is changed, users authenticating via that provider
will no longer be recognised as the same user!
(Use "oidc" here if you are migrating from an old `oidc_config` configuration.)
* `idp_name`: A user-facing name for this identity provider, which is used to
offer the user a choice of login mechanisms.
* `idp_icon`: An optional icon for this identity provider, which is presented
by clients and Synapse's own IdP picker page. If given, must be an
MXC URI of the format mxc://<server-name>/<media-id>. (An easy way to
obtain such an MXC URI is to upload an image to an (unencrypted) room
and then copy the "url" from the source of the event.)
* `idp_brand`: An optional brand for this identity provider, allowing clients
to style the login flow according to the identity provider in question.
See the [spec](https://spec.matrix.org/latest/) for possible options here.
* `discover`: set to false to disable the use of the OIDC discovery mechanism
to discover endpoints. Defaults to true.
* `issuer`: Required. The OIDC issuer. Used to validate tokens and (if discovery
is enabled) to discover the provider's endpoints.
* `client_id`: Required. oauth2 client id to use.
* `client_secret`: oauth2 client secret to use. May be omitted if
`client_secret_jwt_key` is given, or if `client_auth_method` is 'none'.
* `client_secret_jwt_key`: Alternative to client_secret: details of a key used
to create a JSON Web Token to be used as an OAuth2 client secret. If
given, must be a dictionary with the following properties:
* `key`: a pem-encoded signing key. Must be a suitable key for the
algorithm specified. Required unless `key_file` is given.
* `key_file`: the path to file containing a pem-encoded signing key file.
Required unless `key` is given.
* `jwt_header`: a dictionary giving properties to include in the JWT
header. Must include the key `alg`, giving the algorithm used to
sign the JWT, such as "ES256", using the JWA identifiers in
RFC7518.
* `jwt_payload`: an optional dictionary giving properties to include in
the JWT payload. Normally this should include an `iss` key.
* `client_auth_method`: auth method to use when exchanging the token. Valid
values are `client_secret_basic` (default), `client_secret_post` and
`none`.
* `scopes`: list of scopes to request. This should normally include the "openid"
scope. Defaults to ["openid"].
* `authorization_endpoint`: the oauth2 authorization endpoint. Required if
provider discovery is disabled.
* `token_endpoint`: the oauth2 token endpoint. Required if provider discovery is
disabled.
* `userinfo_endpoint`: the OIDC userinfo endpoint. Required if discovery is
disabled and the 'openid' scope is not requested.
* `jwks_uri`: URI where to fetch the JWKS. Required if discovery is disabled and
the 'openid' scope is used.
* `skip_verification`: set to 'true' to skip metadata verification. Use this if
you are connecting to a provider that is not OpenID Connect compliant.
Defaults to false. Avoid this in production.
* `user_profile_method`: Whether to fetch the user profile from the userinfo
endpoint, or to rely on the data returned in the id_token from the `token_endpoint`.
Valid values are: `auto` or `userinfo_endpoint`.
Defaults to `auto`, which uses the userinfo endpoint if `openid` is
not included in `scopes`. Set to `userinfo_endpoint` to always use the
userinfo endpoint.
* `allow_existing_users`: set to true to allow a user logging in via OIDC to
match a pre-existing account instead of failing. This could be used if
switching from password logins to OIDC. Defaults to false.
* `user_mapping_provider`: Configuration for how attributes returned from a OIDC
provider are mapped onto a matrix user. This setting has the following
sub-properties:
* `module`: The class name of a custom mapping module. Default is
`synapse.handlers.oidc.JinjaOidcMappingProvider`.
See https://matrix-org.github.io/synapse/latest/sso_mapping_providers.html#openid-mapping-providers
for information on implementing a custom mapping provider.
* `config`: Configuration for the mapping provider module. This section will
be passed as a Python dictionary to the user mapping provider
module's `parse_config` method.
For the default provider, the following settings are available:
* subject_claim: name of the claim containing a unique identifier
for the user. Defaults to 'sub', which OpenID Connect
compliant providers should provide.
* `localpart_template`: Jinja2 template for the localpart of the MXID.
If this is not set, the user will be prompted to choose their
own username (see the documentation for the `sso_auth_account_details.html`
template). This template can use the `localpart_from_email` filter.
* `confirm_localpart`: Whether to prompt the user to validate (or
change) the generated localpart (see the documentation for the
'sso_auth_account_details.html' template), instead of
registering the account right away.
* `display_name_template`: Jinja2 template for the display name to set
on first login. If unset, no displayname will be set.
* `email_template`: Jinja2 template for the email address of the user.
If unset, no email address will be added to the account.
* `extra_attributes`: a map of Jinja2 templates for extra attributes
to send back to the client during login. Note that these are non-standard and clients will ignore them
without modifications.
When rendering, the Jinja2 templates are given a 'user' variable,
which is set to the claims returned by the UserInfo Endpoint and/or
in the ID Token.
It is possible to configure Synapse to only allow logins if certain attributes
match particular values in the OIDC userinfo. The requirements can be listed under
`attribute_requirements` as shown here:
```yaml
attribute_requirements:
- attribute: family_name
value: "Stephensson"
- attribute: groups
value: "admin"
```
All of the listed attributes must match for the login to be permitted. Additional attributes can be added to
userinfo by expanding the `scopes` section of the OIDC config to retrieve
additional information from the OIDC provider.
If the OIDC claim is a list, then the attribute must match any value in the list.
Otherwise, it must exactly match the value of the claim. Using the example
above, the `family_name` claim MUST be "Stephensson", but the `groups`
claim MUST contain "admin".
Example configuration:
```yaml
oidc_providers:
# Generic example
#
- idp_id: my_idp
idp_name: "My OpenID provider"
idp_icon: "mxc://example.com/mediaid"
discover: false
issuer: "https://accounts.example.com/"
client_id: "provided-by-your-issuer"
client_secret: "provided-by-your-issuer"
client_auth_method: client_secret_post
scopes: ["openid", "profile"]
authorization_endpoint: "https://accounts.example.com/oauth2/auth"
token_endpoint: "https://accounts.example.com/oauth2/token"
userinfo_endpoint: "https://accounts.example.com/userinfo"
jwks_uri: "https://accounts.example.com/.well-known/jwks.json"
skip_verification: true
user_mapping_provider:
config:
subject_claim: "id"
localpart_template: "{{ user.login }}"
display_name_template: "{{ user.name }}"
email_template: "{{ user.email }}"
attribute_requirements:
- attribute: userGroup
value: "synapseUsers"
```
---
Config option: `cas_config`
Enable Central Authentication Service (CAS) for registration and login.
Has the following sub-options:
* `enabled`: Set this to true to enable authorization against a CAS server.
Defaults to false.
* `server_url`: The URL of the CAS authorization endpoint.
* `displayname_attribute`: The attribute of the CAS response to use as the display name.
If no name is given here, no displayname will be set.
* `required_attributes`: It is possible to configure Synapse to only allow logins if CAS attributes
match particular values. All of the keys given below must exist
and the values must match the given value. Alternately if the given value
is `None` then any value is allowed (the attribute just must exist).
All of the listed attributes must match for the login to be permitted.
Example configuration:
```yaml
cas_config:
enabled: true
server_url: "https://cas-server.com"
displayname_attribute: name
required_attributes:
userGroup: "staff"
department: None
```
---
Config option: `sso`
Additional settings to use with single-sign on systems such as OpenID Connect,
SAML2 and CAS.
Server admins can configure custom templates for pages related to SSO. See
[here](../../templates.md) for more information.
Options include:
* `client_whitelist`: A list of client URLs which are whitelisted so that the user does not
have to confirm giving access to their account to the URL. Any client
whose URL starts with an entry in the following list will not be subject
to an additional confirmation step after the SSO login is completed.
WARNING: An entry such as "https://my.client" is insecure, because it
will also match "https://my.client.evil.site", exposing your users to
phishing attacks from evil.site. To avoid this, include a slash after the
hostname: "https://my.client/".
The login fallback page (used by clients that don't natively support the
required login flows) is whitelisted in addition to any URLs in this list.
By default, this list contains only the login fallback page.
* `update_profile_information`: Use this setting to keep a user's profile fields in sync with information from
the identity provider. Currently only syncing the displayname is supported. Fields
are checked on every SSO login, and are updated if necessary.
Note that enabling this option will override user profile information,
regardless of whether users have opted-out of syncing that
information when first signing in. Defaults to false.
Example configuration:
```yaml
sso:
client_whitelist:
- https://riot.im/develop
- https://my.custom.client/
update_profile_information: true
```
---
Config option: `jwt_config`
JSON web token integration. The following settings can be used to make
Synapse JSON web tokens for authentication, instead of its internal
password database.
Each JSON Web Token needs to contain a "sub" (subject) claim, which is
used as the localpart of the mxid.
Additionally, the expiration time ("exp"), not before time ("nbf"),
and issued at ("iat") claims are validated if present.
Note that this is a non-standard login type and client support is
expected to be non-existent.
See [here](../../jwt.md) for more.
Additional sub-options for this setting include:
* `enabled`: Set to true to enable authorization using JSON web
tokens. Defaults to false.
* `secret`: This is either the private shared secret or the public key used to
decode the contents of the JSON web token. Required if `enabled` is set to true.
* `algorithm`: The algorithm used to sign the JSON web token. Supported algorithms are listed at
https://pyjwt.readthedocs.io/en/latest/algorithms.html Required if `enabled` is set to true.
* `subject_claim`: Name of the claim containing a unique identifier for the user.
Optional, defaults to `sub`.
* `issuer`: The issuer to validate the "iss" claim against. Optional. If provided the
"iss" claim will be required and validated for all JSON web tokens.
* `audiences`: A list of audiences to validate the "aud" claim against. Optional.
If provided the "aud" claim will be required and validated for all JSON web tokens.
Note that if the "aud" claim is included in a JSON web token then
validation will fail without configuring audiences.
Example configuration:
```yaml
jwt_config:
enabled: true
secret: "provided-by-your-issuer"
algorithm: "provided-by-your-issuer"
subject_claim: "name_of_claim"
issuer: "provided-by-your-issuer"
audiences:
- "provided-by-your-issuer"
```
---
Config option: `password_config`
Use this setting to enable password-based logins.
This setting has the following sub-options:
* `enabled`: Defaults to true.
* `localdb_enabled`: Set to false to disable authentication against the local password
database. This is ignored if `enabled` is false, and is only useful
if you have other `password_providers`. Defaults to true.
* `pepper`: Set the value here to a secret random string for extra security. # Uncomment and change to a secret random string for extra security.
DO NOT CHANGE THIS AFTER INITIAL SETUP!
* `policy`: Define and enforce a password policy, such as minimum lengths for passwords, etc.
Each parameter is optional. This is an implementation of MSC2000. Parameters are as follows:
* `enabled`: Defaults to false. Set to true to enable.
* `minimum_length`: Minimum accepted length for a password. Defaults to 0.
* `require_digit`: Whether a password must contain at least one digit.
Defaults to false.
* `require_symbol`: Whether a password must contain at least one symbol.
A symbol is any character that's not a number or a letter. Defaults to false.
* `require_lowercase`: Whether a password must contain at least one lowercase letter.
Defaults to false.
* `require_uppercase`: Whether a password must contain at least one uppercase letter.
Defaults to false.
Example configuration:
```yaml
password_config:
enabled: false
localdb_enabled: false
pepper: "EVEN_MORE_SECRET"
policy:
enabled: true
minimum_length: 15
require_digit: true
require_symbol: true
require_lowercase: true
require_uppercase: true
```
---
Config option: `ui_auth`
The amount of time to allow a user-interactive authentication session to be active.
This defaults to 0, meaning the user is queried for their credentials
before every action, but this can be overridden to allow a single
validation to be re-used. This weakens the protections afforded by
the user-interactive authentication process, by allowing for multiple
(and potentially different) operations to use the same validation session.
This is ignored for potentially "dangerous" operations (including
deactivating an account, modifying an account password, and
adding a 3PID).
Use the `session_timeout` sub-option here to change the time allowed for credential validation.
Example configuration:
```yaml
ui_auth:
session_timeout: "15s"
```
---
Config option: `email`
Configuration for sending emails from Synapse.
Server admins can configure custom templates for email content. See
[here](../../templates.md) for more information.
This setting has the following sub-options:
* `smtp_host`: The hostname of the outgoing SMTP server to use. Defaults to 'localhost'.
* `smtp_port`: The port on the mail server for outgoing SMTP. Defaults to 25.
* `smtp_user` and `smtp_pass`: Username/password for authentication to the SMTP server. By default, no
authentication is attempted.
* `require_transport_security`: Set to true to require TLS transport security for SMTP.
By default, Synapse will connect over plain text, and will then switch to
TLS via STARTTLS *if the SMTP server supports it*. If this option is set,
Synapse will refuse to connect unless the server supports STARTTLS.
* `enable_tls`: By default, if the server supports TLS, it will be used, and the server
must present a certificate that is valid for 'smtp_host'. If this option
is set to false, TLS will not be used.
* `notif_from`: defines the "From" address to use when sending emails.
It must be set if email sending is enabled. The placeholder '%(app)s' will be replaced by the application name,
which is normally set in `app_name`, but may be overridden by the
Matrix client application. Note that the placeholder must be written '%(app)s', including the
trailing 's'.
* `app_name`: `app_name` defines the default value for '%(app)s' in `notif_from` and email
subjects. It defaults to 'Matrix'.
* `enable_notifs`: Set to true to enable sending emails for messages that the user
has missed. Disabled by default.
* `notif_for_new_users`: Set to false to disable automatic subscription to email
notifications for new users. Enabled by default.
* `client_base_url`: Custom URL for client links within the email notifications. By default
links will be based on "https://matrix.to". (This setting used to be called `riot_base_url`;
the old name is still supported for backwards-compatibility but is now deprecated.)
* `validation_token_lifetime`: Configures the time that a validation email will expire after sending.
Defaults to 1h.
* `invite_client_location`: The web client location to direct users to during an invite. This is passed
to the identity server as the `org.matrix.web_client_location` key. Defaults
to unset, giving no guidance to the identity server.
* `subjects`: Subjects to use when sending emails from Synapse. The placeholder '%(app)s' will
be replaced with the value of the `app_name` setting, or by a value dictated by the Matrix client application.
In addition, each subject can use the following placeholders: '%(person)s', which will be replaced by the displayname
of the user(s) that sent the message(s), e.g. "Alice and Bob", and '%(room)s', which will be replaced by the name of the room the
message(s) have been sent to, e.g. "My super room". In addition, emails related to account administration will
can use the '%(server_name)s' placeholder, which will be replaced by the value of the
`server_name` setting in your Synapse configuration.
Here is a list of subjects for notification emails that can be set:
* `message_from_person_in_room`: Subject to use to notify about one message from one or more user(s) in a
room which has a name. Defaults to "[%(app)s] You have a message on %(app)s from %(person)s in the %(room)s room..."
* `message_from_person`: Subject to use to notify about one message from one or more user(s) in a
room which doesn't have a name. Defaults to "[%(app)s] You have a message on %(app)s from %(person)s..."
* `messages_from_person`: Subject to use to notify about multiple messages from one or more users in
a room which doesn't have a name. Defaults to "[%(app)s] You have messages on %(app)s from %(person)s..."
* `messages_in_room`: Subject to use to notify about multiple messages in a room which has a
name. Defaults to "[%(app)s] You have messages on %(app)s in the %(room)s room..."
* `messages_in_room_and_others`: Subject to use to notify about multiple messages in multiple rooms.
Defaults to "[%(app)s] You have messages on %(app)s in the %(room)s room and others..."
* `messages_from_person_and_others`: Subject to use to notify about multiple messages from multiple persons in
multiple rooms. This is similar to the setting above except it's used when
the room in which the notification was triggered has no name. Defaults to
"[%(app)s] You have messages on %(app)s from %(person)s and others..."
* `invite_from_person_to_room`: Subject to use to notify about an invite to a room which has a name.
Defaults to "[%(app)s] %(person)s has invited you to join the %(room)s room on %(app)s..."
* `invite_from_person`: Subject to use to notify about an invite to a room which doesn't have a
name. Defaults to "[%(app)s] %(person)s has invited you to chat on %(app)s..."
* `password_reset`: Subject to use when sending a password reset email. Defaults to "[%(server_name)s] Password reset"
* `email_validation`: Subject to use when sending a verification email to assert an address's
ownership. Defaults to "[%(server_name)s] Validate your email"
Example configuration:
```yaml
email:
smtp_host: mail.server
smtp_port: 587
smtp_user: "exampleusername"
smtp_pass: "examplepassword"
require_transport_security: true
enable_tls: false
notif_from: "Your Friendly %(app)s homeserver <noreply@example.com>"
app_name: my_branded_matrix_server
enable_notifs: true
notif_for_new_users: false
client_base_url: "http://localhost/riot"
validation_token_lifetime: 15m
invite_client_location: https://app.element.io
subjects:
message_from_person_in_room: "[%(app)s] You have a message on %(app)s from %(person)s in the %(room)s room..."
message_from_person: "[%(app)s] You have a message on %(app)s from %(person)s..."
messages_from_person: "[%(app)s] You have messages on %(app)s from %(person)s..."
messages_in_room: "[%(app)s] You have messages on %(app)s in the %(room)s room..."
messages_in_room_and_others: "[%(app)s] You have messages on %(app)s in the %(room)s room and others..."
messages_from_person_and_others: "[%(app)s] You have messages on %(app)s from %(person)s and others..."
invite_from_person_to_room: "[%(app)s] %(person)s has invited you to join the %(room)s room on %(app)s..."
invite_from_person: "[%(app)s] %(person)s has invited you to chat on %(app)s..."
password_reset: "[%(server_name)s] Password reset"
email_validation: "[%(server_name)s] Validate your email"
```
---
## Push ##
Configuration settings related to push notifications
---
Config option: `push`
This setting defines options for push notifications.
This option has a number of sub-options. They are as follows:
* `include_content`: Clients requesting push notifications can either have the body of
the message sent in the notification poke along with other details
like the sender, or just the event ID and room ID (`event_id_only`).
If clients choose the to have the body sent, this option controls whether the
notification request includes the content of the event (other details
like the sender are still included). If `event_id_only` is enabled, it
has no effect.
For modern android devices the notification content will still appear
because it is loaded by the app. iPhone, however will send a
notification saying only that a message arrived and who it came from.
Defaults to true. Set to false to only include the event ID and room ID in push notification payloads.
* `group_unread_count_by_room: false`: When a push notification is received, an unread count is also sent.
This number can either be calculated as the number of unread messages for the user, or the number of *rooms* the
user has unread messages in. Defaults to true, meaning push clients will see the number of
rooms with unread messages in them. Set to false to instead send the number
of unread messages.
Example configuration:
```yaml
push:
include_content: false
group_unread_count_by_room: false
```
---
## Rooms ##
Config options relating to rooms.
---
Config option: `encryption_enabled_by_default`
Controls whether locally-created rooms should be end-to-end encrypted by
default.
Possible options are "all", "invite", and "off". They are defined as:
* "all": any locally-created room
* "invite": any room created with the `private_chat` or `trusted_private_chat`
room creation presets
* "off": this option will take no effect
The default value is "off".
Note that this option will only affect rooms created after it is set. It
will also not affect rooms created by other servers.
Example configuration:
```yaml
encryption_enabled_by_default_for_room_type: invite
```
---
Config option: `enable_group_creation`
Set to true to allow non-server-admin users to create groups on this server
Example configuration:
```yaml
enable_group_creation: true
```
---
Config option: `group_creation_prefix`
If enabled/present, non-server admins can only create groups with local parts
starting with this prefix.
Example configuration:
```yaml
group_creation_prefix: "unofficial_"
```
---
Config option: `user_directory`
This setting defines options related to the user directory.
This option has the following sub-options:
* `enabled`: Defines whether users can search the user directory. If false then
empty responses are returned to all queries. Defaults to true.
* `search_all_users`: Defines whether to search all users visible to your HS when searching
the user directory. If false, search results will only contain users
visible in public rooms and users sharing a room with the requester.
Defaults to false.
NB. If you set this to true, and the last time the user_directory search
indexes were (re)built was before Synapse 1.44, you'll have to
rebuild the indexes in order to search through all known users.
These indexes are built the first time Synapse starts; admins can
manually trigger a rebuild via API following the instructions at
https://matrix-org.github.io/synapse/latest/usage/administration/admin_api/background_updates.html#run
Set to true to return search results containing all known users, even if that
user does not share a room with the requester.
* `prefer_local_users`: Defines whether to prefer local users in search query results.
If set to true, local users are more likely to appear above remote users when searching the
user directory. Defaults to false.
Example configuration:
```yaml
user_directory:
enabled: false
search_all_users: true
prefer_local_users: true
```
---
Config option: `user_consent`
For detailed instructions on user consent configuration, see [here](../../consent_tracking.md).
Parts of this section are required if enabling the `consent` resource under
`listeners`, in particular `template_dir` and `version`. # TODO: link `listeners`
* `template_dir`: gives the location of the templates for the HTML forms.
This directory should contain one subdirectory per language (eg, `en`, `fr`),
and each language directory should contain the policy document (named as
<version>.html) and a success page (success.html).
* `version`: specifies the 'current' version of the policy document. It defines
the version to be served by the consent resource if there is no 'v'
parameter.
* `server_notice_content`: if enabled, will send a user a "Server Notice"
asking them to consent to the privacy policy. The `server_notices` section ##TODO: link
must also be configured for this to work. Notices will *not* be sent to
guest users unless `send_server_notice_to_guests` is set to true.
* `block_events_error`, if set, will block any attempts to send events
until the user consents to the privacy policy. The value of the setting is
used as the text of the error.
* `require_at_registration`, if enabled, will add a step to the registration
process, similar to how captcha works. Users will be required to accept the
policy before their account is created.
* `policy_name` is the display name of the policy users will see when registering
for an account. Has no effect unless `require_at_registration` is enabled.
Defaults to "Privacy Policy".
Example configuration:
```yaml
user_consent:
template_dir: res/templates/privacy
version: 1.0
server_notice_content:
msgtype: m.text
body: >-
To continue using this homeserver you must review and agree to the
terms and conditions at %(consent_uri)s
send_server_notice_to_guests: true
block_events_error: >-
To continue using this homeserver you must review and agree to the
terms and conditions at %(consent_uri)s
require_at_registration: false
policy_name: Privacy Policy
```
---
Config option: `stats`
Settings for local room and user statistics collection. See [here](../../room_and_user_statistics.md)
for more.
* `enabled`: Set to false to disable room and user statistics. Note that doing
so may cause certain features (such as the room directory) not to work
correctly. Defaults to true.
Example configuration:
```yaml
stats:
enabled: false
```
---
Config option: `server_notices`
Use this setting to enable a room which can be used to send notices
from the server to users. It is a special room which users cannot leave; notices
in the room come from a special "notices" user id.
If you use this setting, you *must* define the `system_mxid_localpart`
sub-setting, which defines the id of the user which will be used to send the
notices.
Sub-options for this setting include:
* `system_mxid_display_name`: set the display name of the "notices" user
* `system_mxid_avatar_url`: set the avatar for the "notices" user
* `room_name`: set the room name of the server notices room
Example configuration:
```yaml
server_notices:
system_mxid_localpart: notices
system_mxid_display_name: "Server Notices"
system_mxid_avatar_url: "mxc://server.com/oumMVlgDnLYFaPVkExemNVVZ"
room_name: "Server Notices"
```
---
Config option: `enable_room_list_search`
Set to false to disable searching the public room list. When disabled
blocks searching local and remote room lists for local and remote
users by always returning an empty list for all queries. Defaults to true.
Example configuration:
```yaml
enable_room_list_search: false
```
---
Config option: `alias_creation`
The `alias_creation` option controls who is allowed to create aliases
on this server.
The format of this option is a list of rules that contain globs that
match against user_id, room_id and the new alias (fully qualified with
server name). The action in the first rule that matches is taken,
which can currently either be "allow" or "deny".
Missing user_id/room_id/alias fields default to "*".
If no rules match the request is denied. An empty list means no one
can create aliases.
Options for the rules include:
* `user_id`: Matches against the creator of the alias. Defaults to "*".
* `alias`: Matches against the alias being created. Defaults to "*".
* `room_id`: Matches against the room ID the alias is being pointed at. Defaults to "*"
* `action`: Whether to "allow" or "deny" the request if the rule matches. Defaults to allow.
Example configuration:
```yaml
alias_creation_rules:
- user_id: "bad_user"
alias: "spammy_alias"
room_id: "*"
action: deny
```
---
Config options: `room_list_publication_rules`
The `room_list_publication_rules` option controls who can publish and
which rooms can be published in the public room list.
The format of this option is the same as that for
`alias_creation_rules`.
If the room has one or more aliases associated with it, only one of
the aliases needs to match the alias rule. If there are no aliases
then only rules with `alias: *` match.
If no rules match the request is denied. An empty list means no one
can publish rooms.
Options for the rules include:
* `user_id`: Matches against the creator of the alias. Defaults to "*".
* `alias`: Matches against any current local or canonical aliases associated with the room. Defaults to "*".
* `room_id`: Matches against the room ID being published. Defaults to "*".
* `action`: Whether to "allow" or "deny" the request if the rule matches. Defaults to allow.
Example configuration:
```yaml
room_list_publication_rules:
- user_id: "*"
alias: "*"
room_id: "*"
action: allow
```
---
Config option: `default_power_level_content_override`
The `default_power_level_content_override` option controls the default power
levels for rooms.
Useful if you know that your users need special permissions in rooms
that they create (e.g. to send particular types of state events without
needing an elevated power level). This takes the same shape as the
`power_level_content_override` parameter in the /createRoom API, but
is applied before that parameter.
Note that each key provided inside a preset (for example `events` in the example
below) will overwrite all existing defaults inside that key. So in the example
below, newly-created private_chat rooms will have no rules for any event types
except `com.example.foo`.
Example configuration:
```yaml
default_power_level_content_override:
private_chat: { "events": { "com.example.foo" : 0 } }
trusted_private_chat: null
public_chat: null
```
---
## Opentracing ##
Configuration options related to Opentracing support.
---
Config option: `opentracing`
These settings enable and configure opentracing, which implements distributed tracing.
This allows you to observe the causal chains of events across servers
including requests, key lookups etc., across any server running
synapse or any other services which support opentracing
(specifically those implemented with Jaeger).
Sub-options include:
* `enabled`: whether tracing is enabled. Set to true to enable. Disabled by default.
* `homeserver_whitelist`: The list of homeservers we wish to send and receive span contexts and span baggage.
See [here](../../opentracing.md) for more.
This is a list of regexes which are matched against the `server_name` of the homeserver.
By default, it is empty, so no servers are matched.
* `force_tracing_for_users`: # A list of the matrix IDs of users whose requests will always be traced,
even if the tracing system would otherwise drop the traces due to probabilistic sampling.
By default, the list is empty.
* `jaeger_config`: Jaeger can be configured to sample traces at different rates.
All configuration options provided by Jaeger can be set here. Jaeger's configuration is
mostly related to trace sampling which is documented [here](https://www.jaegertracing.io/docs/latest/sampling/).
Example configuration:
```yaml
opentracing:
enabled: true
homeserver_whitelist:
- ".*"
force_tracing_for_users:
- "@user1:server_name"
- "@user2:server_name"
jaeger_config:
sampler:
type: const
param: 1
logging:
false
```
---
## Workers ##
Configuration options related to workers.
---
Config option: `send_federation`
Controls sending of outbound federation transactions on the main process.
Set to false if using a federation sender worker. Defaults to true.
Example configuration:
```yaml
send_federation: false
```
---
Config option: `federation_sender_instances`
It is possible to run multiple federation sender workers, in which case the
work is balanced across them. Use this setting to list the senders.
This configuration setting must be shared between all federation sender workers, and if
changed all federation sender workers must be stopped at the same time and then
started, to ensure that all instances are running with the same config (otherwise
events may be dropped).
Example configuration:
```yaml
federation_sender_instances:
- federation_sender1
```
---
Config option: `instance_map`
When using workers this should be a map from worker name to the
HTTP replication listener of the worker, if configured.
Example configuration:
```yaml
instance_map:
worker1:
host: localhost
port: 8034
```
---
Config option: `stream_writers`
Experimental: When using workers you can define which workers should
handle event persistence and typing notifications. Any worker
specified here must also be in the `instance_map`.
Example configuration:
```yaml
stream_writers:
events: worker1
typing: worker1
```
---
Config option: `run_background_task_on`
The worker that is used to run background tasks (e.g. cleaning up expired
data). If not provided this defaults to the main process.
Example configuration:
```yaml
run_background_tasks_on: worker1
```
---
Config option: `worker_replication_secret`
A shared secret used by the replication APIs to authenticate HTTP requests
from workers.
By default this is unused and traffic is not authenticated.
Example configuration:
```yaml
worker_replication_secret: "secret_secret"
```
Config option: `redis`
Configuration for Redis when using workers. This *must* be enabled when
using workers (unless using old style direct TCP configuration).
This setting has the following sub-options:
* `enabled`: whether to use Redis support. Defaults to false.
* `host` and `port`: Optional host and port to use to connect to redis. Defaults to
localhost and 6379
* `password`: Optional password if configured on the Redis instance.
Example configuration:
```yaml
redis:
enabled: true
host: localhost
port: 6379
password: <secret_password>
```
## Background Updates ##
Configuration settings related to background updates.
---
Config option: `background_updates`
Background updates are database updates that are run in the background in batches.
The duration, minimum batch size, default batch size, whether to sleep between batches and if so, how long to
sleep can all be configured. This is helpful to speed up or slow down the updates.
This setting has the following sub-options:
* `background_update_duration_ms`: How long in milliseconds to run a batch of background updates for. Defaults to 100.
Set a different time to change the default.
* `sleep_enabled`: Whether to sleep between updates. Defaults to true. Set to false to change the default.
* `sleep_duration_ms`: If sleeping between updates, how long in milliseconds to sleep for. Defaults to 1000.
Set a duration to change the default.
* `min_batch_size`: Minimum size a batch of background updates can be. Must be greater than 0. Defaults to 1.
Set a size to change the default.
* `default_batch_size`: The batch size to use for the first iteration of a new background update. The default is 100.
Set a size to change the default.
Example configuration:
```yaml
background_updates:
background_update_duration_ms: 500
sleep_enabled: false
sleep_duration_ms: 300
min_batch_size: 10
default_batch_size: 50
```