Container initialization and wallet initialization have to ensure to use the same wallet name.
In order to avoid problems constants are introduced to ensure we use the same wallet name.
Prefixing docker-containers and -networks is a necessity to be able to spin up multiple containers and networks.
However, there is no reason to prefix the wallet names that live inside a container. One cannot add a wallet with
the same name twice, so the prefixing of wallets does not bring any advantage. When re-opening a wallet by name
the wallet name prefix is cumbersome and was thus removed.
The wallet is an instance of a wallet that has a name.
When we use `CreateWalletForOutputThenReloadWallet` we actually unload the wallet.
It would be cleaner to create a new instance that does that swap, but I did not go that far.
Instead of instantiating the `EventLoop` within the builder, we only
pass in the necessary arguments (which is the `EventLoopHandle`) to
the Builder upon `new`.
This is work towards #255 which will require us to perform network
communication (which implies having the `EventLoop`) before starting
a swap.
If our expression directly evaluates to a future, we don't need to
create an async block.
This requires us to have `EventLoopRun::run` consume the instance
instead of just taking a mutable reference (otherwise we run into
lifetime issues). However, that is better anyway because `run` is
an endless loop so you never get to use the handle afterwards
anyway.
Previously we were ignoring if the monero wallet rpc was not found and
unpacked from archive leading to a failure down the line when trying to
run a non-existent executable. Bail when the executable is no found in
the archive.
1. We can generalize the signing interface by passing a PSBT in
instead of the `TxLock` transaction.
2. Knowing the transaction ID of a transaction that we are about
to sign is not very useful. Instead, it is much more useful to know
what failed. Hence we add a `.context` to the call of `sign_and_finalize`.
3. In case the signing succeeds, we will immediately broadcast it
afterwards. The new broadcasting interface will tell us that we broadcasted
the "lock" transaction.
We eliminate unnecessary layers of indirection for broadcasting logic
and force our callers to provide us with the `kind` of transaction
that we are publishing.
Eventually, we can replace this string with some type-system magic
we can derive the name from the actual transaction. For now, we just
require the caller to duplicate this information because it is faster
and good enough TM.
This struct is a wallet. The only thing it can meaningfully broadcast
are transactions. The fact that they have to be signed for that is
implied. You cannot broadcast unsigned transactions.
Abstracting over the individual bits of functionality of the wallet
does have its place, especially if one wants to keep a separation
of an abstract protocol library that other people can use with their
own wallets.
However, at the moment, the traits only cause unnecessary friction.
We can always add such abstraction layers again once we need them.
If the user doesn't pass `--debug`, we only show `INFO` logs but
without time and level to make it clearer that it is meant to be
read by the user.
Without `--debug`, the user sees:
Still got 0.00009235 BTC left in wallet, swapping ...
With `--debug`, they see:
2021-03-01 12:21:07 DEBUG Database and seed will be stored in /home/thomas/.local/share/xmr-btc-swap
2021-03-01 12:21:07 DEBUG Starting monero-wallet-rpc on port 40779
2021-03-01 12:21:11 INFO Still got 0.00009235 BTC left in wallet, swapping ...
2021-03-01 12:21:11 DEBUG Dialing alice at 12D3KooWCdMKjesXMJz1SiZ7HgotrxuqhQJbP5sgBm2BwP1cqThi
2021-03-01 12:21:12 DEBUG Requesting quote for 0.00008795 BTC
Previously, the time was formatted as ISO8601 timestamps which is
barely readable by humans. Activating the `chrono` feature allows
us to format with a different format string. The output now looks
like this:
2021-03-01 11:59:52 DEBUG Database and seed will be stored in /home/thomas/.local/share/xmr-btc-swap
2021-03-01 11:59:52 DEBUG Starting monero-wallet-rpc on port 40673
2021-03-01 11:59:59 DEBUG Still got 0.00009235 BTC left in wallet, swapping ...
2021-03-01 11:59:59 DEBUG Dialing alice at 12D3KooWCdMKjesXMJz1SiZ7HgotrxuqhQJbP5sgBm2BwP1cqThi
2021-03-01 11:59:59 DEBUG Requesting quote for 0.00008795 BTC
There is a double space after the time which is already fixed in
tracing-subscriber but not yet released.
See https://github.com/tokio-rs/tracing/issues/1271.
Log messages are ideally as close to the functionality they are talking about, otherwise we might end up repeating ourselves on several callsites or the log messages gets outdated if the behaviour changes.
These intermediate structs were creating unnecessary noise. The peer id
and multiaddr fields are going to be removed in the future further
reducing the need to have seperate structs for cancel, resume and
refund.
If communication with the other party fails the program should stop and the user should see the respective error.
Communication errors are handled in the event-loop. Upon a communication error the event loop is stopped.
Since the event loop is only stopped upon error the Result returned from the event loop is Infallible.
If one of the two futures, event loop and swap, finishes (success/failure) the other future should be stopped as well.
We use tokio::selec! to stop either future if the other stops.
Failure does not express what the error represents. It is only used for communication
errors for quote requests, receiving the XMR transfer proof and sending the encryption signature.
If the current balance is 0, we wait until the user deposits money
to the given address. After that, we simply swap the full balance.
Not only does this simplify the interface by removing a parameter,
but it also integrates the `deposit` command into the `buy-xmr`
command.
Syncing a wallet that is backed by electrum includes transactions
that are part of the mempool when computing the balance.
As such, waiting for a deposit is a very quick action because it
allows us to build our lock transaction on top of the yet to be
confirmed deposit transactions.
This patch introduces another function to the `bitcoin::Wallet` that
relies on the currently statically encoded fee rate. To make sure
future developers don't forget to adjust both, we extract a function
that "selects" a fee rate and return the constant from there.
Fixes#196.
These traits were only used once within the `TxLock` constructor.
Looking at the rest of the codebase, we don't really seem to follow
any abstractions here where the protocol shouldn't know about the
exact types that is being passed in.
As such, these types are just noise and might as well be removed in
favor of simplicity.
The only reason we need this argument is because we need to access
the output descriptor. We can save that one ahead of time at when
we construct the type.
BDK already has a log line for the sync that we could enable if we
wanted such a log.
Additionally, _we_ are not actually syncing the wallet, bdk is so our
log line was lying. It should have said "calling bdk to sync wallet".
231: Error only on close message when fetching the rate r=thomaseizinger a=da-kami
Ping/Pong messages disturb the rate requests quite frequently resulting in failed swap setup because there is no rate available.
As a result messages Ping, Pong and Binary are now ignored and not reported as error.
Co-authored-by: Daniel Karzel <daniel@comit.network>
If the monero wallet rpc has not already been downloaded we download the monero cli package and extract the wallet rpc. The unneeded files are cleaned up. The monero wallet rpc is started on a random port which is provided to the swap cli.
We added a fork of tokio-tar via a git subtree because we needed a tokio-tar version that was compatible with tokio 1.0. Remove this subtree in favor of a regular cargo dependency when this PR merges: https://github.com/vorot93/tokio-tar/pull/3.
For transitioning to state4 we either go into a redeem or a cancellation scenario.
The function name state4 is misleading, because it is only used for cancellation scenarios.
This TDOO is misleading, because - to our current knowledge - it is impossible for
Bob to retrieve the exact inclusion block-height of the lock transaction (send by Alice).
The wallet RPC is only capable of retrieving the inclusion block height of a transaction
through `get_payments` and `get_bulk_payments` which requires the `payment_id`.
The `payment_id` can be retrieved through `get_transfer_by_txid` which states
"Show information about a transfer to/from this address." - however the address that the
transfer goes to is not part of Bob's wallet yet! Thus, it is impossible for Bob to use
`get_transfer_by_txid` which in turn means Bob is unable to use `get_payments`.
The only possible way for Bob to know the exact inclusion block/height of the lock transaction
would be if Alice sends it over to Bob. But for that Alice would have to extract it she would have
to wait for confirmation - which she currently does not and might never do. Even if she does await
the first confirmation before sending the transfer proof the solution for retrieving the inclusion
block-height is not fleshed out on her side yet.
In order to ensure that we can atomically generate_from_keys and then reload a wallet,
we have to wrap the client of the monero wallet RPC inside a mutex.
When introducing the Mutex I noticed that several inner RPC calls were leaking to the
swap crate monero wallet. As this is a violation of boundaries I introduced the traits
`GetAddress`, `WalletBlockHeight` and `Refresh`.
Note that the monero wallet could potentially know its own public view key and
public spend key. If we refactor the wallet to include this information upon wallet
creation we can also generate addresses using `monero::Address::standard`.
By updating `tracing_log`, we can access the re-export. That we need
to initialize the `tracing_log` adaptor.
The usage of `log::LevelFilter` for the `init_tracing` function was
conceptually incorrect. We should be using a type from the `tracing`
library here.
The automated swap backend (asb) requires Monero funds, because Alice is selling Monero.
We use a hardcoded default wallet named asb-wallet. This wallet is opened upon startup.
If the default wallet does not exist it will be created.
This allows us to use .context instead of .map_err when calling
`latest_rate()`. For the static rate module, we simply fill in
`Infallible` which is actually better suited because it describes
that we are never using this error.
Note that because we are using `watch` channel, only a reference to the
channel value can be returned.
Hence, using custom Error that can be cloned to be able to
pass `Result` through the channel.
209: Upgrade to bdk 0.4 r=thomaseizinger a=thomaseizinger
Effectively, this also means:
- Upgrading to rust-bitcoin 0.26
- Upgrading to miniscript 5
- Upgrading monero to 0.10
- Upgrading curve25519-dalek to 3
- Upgrading bitcoin-harness to rust-bitcoin 0.26 (https://github.com/coblox/bitcoin-harness-rs/pull/21)
- Upgrade `ecdsa_fun` to latest version
- Replace `cross_curve_dleq` with `sigma_fun` (to avoid an upgrade dance on that library)
I refrained from specifying `rev`s in the Cargo.toml because we have a lock-file anyway. This should allow us to update those dependencies easier in the future by just running `cargo update -p <dependency>`.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Once the transaction was included into a block it has one confirmation - before inclusion it has zero.
current-block-height - transaction-block-height = zero; but that means one confirmation.
Hence, the confirmation calculation was adapted to: Current-block-height - (transaction-block-height - 1).
To achieve this we also:
- upgrade rust-bitcoin to 0.26
- upgrade bitcoin-harness to latest version (which also depends bitcoin 0.26)
- upgrade to latest edcsa-fun
- replace cross_curve_dleq proof with sigma_fun (to avoid an upgrade dance over there)
200: Wait for refund if insufficient Monero is locked up r=da-kami a=da-kami
In a scenario where Alice does not lock up sufficient funds Bob should properly transition to refunds. At the moment the CLI just panics.
I noticed this when Alice accidentally had a different amount set than Bob. In the future this should not happen, because Alice provides the amount for Bob. However, in case Alice is malicious Bob should still transition correctly.
Co-authored-by: Daniel Karzel <daniel@comit.network>
206: Remove misplaced wallet sync call r=rishflab a=rishflab
These bdk wallet sync calls must of gotten lost during a rebase. Removed the call in build TxLock and added one when nectar starts up
Co-authored-by: rishflab <rishflab@hotmail.com>
The bitcoind wallet required the user to run a bitcoind node. It was replaced with a bdk wallet which allows the user to connect to an electrum instance hosted remotely. An electrum and bitcoind testcontainer were created to the test the bdk wallet. The electrum container reads the blockdata from the bitcoind testcontainer through a shared volume. bitcoind-harness was removed as bitcoind initialisation code was moved into test_utils. The bdk wallet differs from the bitcoind wallet in that it needs to be manually synced with an electrum node. We synchronise the wallet once upon initialisation to prevent a potentially long running blocking task from interrupting protocol execution. The electrum HTTP API was used to get the latest block height and the transaction block height as this functionality was not present in the bdk wallet API or it required the bdk wallet to be re-synced to get an up to date value.
190: Do not pass Monero amount to the CLI r=D4nte a=D4nte
The CLI user only pass the Bitcoin amount they want to sell.
The CLI then do a quote request to nectar which provides the Monero amount the taker can get.
Co-authored-by: Franck Royer <franck@coblox.tech>
188: Tor cleanup r=da-kami a=da-kami
We never removed Tor install from CI. I don't think it should be necessary given that Tor was removed in code.
Co-authored-by: Daniel Karzel <daniel@comit.network>
To allow the related timelock to be defined with the
transaction that uses it. This will allow the access to the
timelock's struct inner field with defining `From` impl.
Hence, reducing complexity of the codebase. Note that the seed will be
used by both nectar and the cli whereas the config mod will be different
so this changes helps with the next step of having a dedicated config
module for each binary.
The punish test needs re-work due to the fact that Alice runs continuously
Currently focusing on the CLI (Bob), so we can re-introduce this test
once we want to ensure that nectar (Alice) punishes.
The test do not work without acks as we stop the event loop as soon
as a message is considered as "sent" when actually the event loop
and swarm may not have yet sent the message.
The ack allow to avoid this issue as the message was considered "sent"
only once the other party sent a response. However, the ack brings
other issue so a review needs to be done to select the appropriate
solution.
We are aware of issues of timeouts when waiting for acknowledgements.
Also, to properly supports acks in a multiple swap context, we need to
revert to doing event processing on the behaviour so that we can link
leverage the `RequestResponse` libp2p behaviour and link the messages
requests ids to swap ids when receiving an ack or response.
Acks are usefully for specific scenarios where we queue a message on the
behaviour to be sent, save as sent in the DB but crash before the
message is actually sent. With acks we are able to resume the swap,
without ack, the swap will abort (refund).
`alice::swap::run_until` will be called once the execution setup is
done. The steps before are directly handled by the event loop,
hence no channels are needed for said steps: connection established,
swap request/response & execution setup.
