Commit Graph

914 Commits

Author SHA1 Message Date
bors[bot]
ded9ea1b79
Merge #525
525: Bitcoin transaction published state r=da-kami a=da-kami

This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality and prevents re-publishing the transaction.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-24 02:55:31 +00:00
bors[bot]
284733d359
Merge #522
522: Add support for arm architecture to Swap CLI r=da-kami a=bonomat

Tested locally on my RPI4

Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
2021-05-24 01:58:57 +00:00
Daniel Karzel
01af9a5676
Bitcoin transaction published state
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
2021-05-24 10:53:14 +10:00
bors[bot]
db319d0a90
Merge #520
520: Cli json logging r=da-kami a=da-kami

Combining `--json` with the debug file logger was a pita, so I stopped and went for a simpler approach:

If `--json` is given we just log to terminal - **no** logfiles will be created in `{data-dir}/logs`. 
The `--debug` flag applies to `--json` (i.e. if not given it will just print json on info level). We could change that to automatically fallback to debug - could add a `required_if` dependency via strucopt/clap but I did not want to invest more time into thinking about this.

Note on extending binary functionality:
As discussed with @thomaseizinger recently, we will have to think about multiple binaries soon, i.e. a binary that focuses to be used to building on top of it (that always logs json) and potientially keeping a simple CLI that is more user friendly. This also goes towards more clearly separating the application code from re-usable protocol / network code. 


Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-21 09:49:10 +00:00
Philipp Hoenisch
21babf9678
Support armv7 architecture for monero-wallet-rpc.
This allows us to run swap cli on a raspberry pi 4.
2021-05-21 17:55:04 +10:00
Philipp Hoenisch
a445ddd2bd
Print download URL while downloading. 2021-05-21 17:54:03 +10:00
Philipp Hoenisch
f6c7410457
Upgrade monero-wallet-rpc to version 2.0 2021-05-21 17:53:43 +10:00
bors[bot]
ba33e1acc1
Merge #519
519: Avoid application error upon `--help` r=da-kami a=da-kami

Our `preview` release is currently broken because of this issue.

The way we use clap's `get_matches_from_safe` caused parsing errors upon `--help` and `--version` to be bubbled up to the application - which causes the application to exit with an error when running `--help` and `--version`.
This is solved by using `get_matches_from` instead of `get_matches_from_safe` which handles these known clap commands internally and exits early. 

Added smoke tests to CI so we catch such kind of problems in the future. Smoke testing by calling `--help` is cheap and should be OK in CI.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-21 05:43:24 +00:00
Daniel Karzel
fb9fb21c2b
CLI log statements to be more JSON friendly
Values to be logged as fields.
Upon starting a swap we print the swap-id as well.
2021-05-21 15:00:31 +10:00
Daniel Karzel
0187d9ef4f
Introduce --json flag for the CLI
When `--json` is used the CLI does not log to file, but only on the command line in json output.
2021-05-21 15:00:19 +10:00
bors[bot]
0032e820af
Merge #512
512: Bump libp2p from 0.37.1 to 0.38.0 r=thomaseizinger a=dependabot[bot]

Bumps [libp2p](https://github.com/libp2p/rust-libp2p) from 0.37.1 to 0.38.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/libp2p/rust-libp2p/releases">libp2p's releases</a>.</em></p>
<blockquote>
<h2>v0.38.0</h2>
<p>See individual <a href="https://github.com/libp2p/rust-libp2p/blob/HEAD/CHANGELOG.md">changelogs</a> for details.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/libp2p/rust-libp2p/blob/master/CHANGELOG.md">libp2p's changelog</a>.</em></p>
<blockquote>
<h2>Version 0.38.0 [2021-05-17]</h2>
<ul>
<li>Update individual crates.
<ul>
<li><code>libp2p-core</code></li>
<li><code>libp2p-gossipsub</code></li>
<li><code>libp2p-noise</code></li>
<li><code>libp2p-pnet</code></li>
<li><code>libp2p-wasm-ext</code></li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="0b7ee3fa92"><code>0b7ee3f</code></a> *: Prepare v0.38.0 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2072">#2072</a>)</li>
<li><a href="c5bcada2c2"><code>c5bcada</code></a> protocols/gossipsub: Rework connection keep-alive (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2043">#2043</a>)</li>
<li><a href="9c5dd84099"><code>9c5dd84</code></a> build(deps): Update snow requirement from 0.7.1 to 0.8.0 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2068">#2068</a>)</li>
<li><a href="1fdac073fc"><code>1fdac07</code></a> build(deps): Bump actions-rs/toolchain from 1 to 1.0.7 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2069">#2069</a>)</li>
<li><a href="10fcc1c485"><code>10fcc1c</code></a> build(deps): Bump actions-rs/cargo from 1 to 1.0.3 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2070">#2070</a>)</li>
<li><a href="82c8b1a4b3"><code>82c8b1a</code></a> build(deps): Bump actions/checkout from 2 to 2.3.4 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2071">#2071</a>)</li>
<li><a href="43a8ad8fc2"><code>43a8ad8</code></a> protocols/relay/examples: Add client server instructions (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2060">#2060</a>)</li>
<li><a href="8988ac247e"><code>8988ac2</code></a> protocols/mdns: Fix discovered event emission. (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2065">#2065</a>)</li>
<li><a href="5c541a16f1"><code>5c541a1</code></a> build(deps): update salsa20 requirement from 0.7 to 0.8 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2062">#2062</a>)</li>
<li><a href="d931f36428"><code>d931f36</code></a> transport/wasm-ext: Support dialing <code>Multiaddr</code> with <code>/p2p</code> protocol (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2058">#2058</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/libp2p/rust-libp2p/compare/v0.37.1...v0.38.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=libp2p&package-manager=cargo&previous-version=0.37.1&new-version=0.38.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-05-21 01:48:01 +00:00
Daniel Karzel
9ff29ae491
CLI --help and --version are handled correctly
Since we introduced our own parsing function for command line arguments, we have to make sure that clap's behaviour is handled correctly.
Clap's `get_matches_from_safe` returns an error of a certain kind, of which `ErrorKind::HelpDisplayed` and `ErrorKind::VersionDisplayed ` have to be handled to properly print the help/version and exit the program.
The clap error includes the message, so we print help/version in main now and ensure the program exits with `0` afterwards.
2021-05-21 11:46:11 +10:00
Daniel Karzel
22bf48c287
Fix bug that breaks swap ID for logging 2021-05-20 14:52:36 +10:00
bors[bot]
bdb88f89cb
Merge #490
490: Mainnet switch r=da-kami a=da-kami

Fixes  #446
Fixes #360 
Fixes #506 
Fixes #478 

To be precise: It is actually a testnet switch, because I think mainnet should be default.

I took several assumptions on the way (e.g. network support, ...).

At this stage any feedback welcome :)

TODO:

- [ ] successful mainnet swap with this code base before merging :)

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-20 04:16:55 +00:00
Daniel Karzel
2db470f099
Bitcoin=2 Monero=10 default finality confirmations
It is currently not expected that ASB and CLI are used for swaps > 10_000$ equivalent to XMR/BTC, thus the finality confirmations were reduced to an equivalent of 20 mins of work (2 blocks for Bitcoin, 10 for Monero).
Monero enforces 10 unlocking blocks until the balance is spendable, so the finality confirmations cannot be set lower than 10.
2021-05-20 13:05:52 +10:00
Daniel Karzel
6694e4f4e0
Ensure that output of lock script is at tx-output index 0
We subscribe to transactions upon broadcast, where we use output index `0` for the subscription.
In order to ensure that this subscription is guaranteed to be for the locking script (and not a change output) we now ensure that the locking script output is always at index `0` of the outputs of the transaction.

We chose this solution because otherwise we would have to add more information to broadcasting a transaction.
This solution is less intrusive, because the order of transaction outputs should not have any side effects and ensuring index `0` makes the whole behaviour more deterministic.
2021-05-20 13:05:52 +10:00
Daniel Karzel
bae38a712f
Sync on interval instead of ping
Since we don't rely on long running subscriptions anymore we can remove the ping that was used to ensure a connection refresh.
2021-05-20 13:05:51 +10:00
Daniel Karzel
efb51820b1
Poll block headers for latest block on each iteration
The Electrum block-header subscription did not provide us with block headers, because upon the connection being closed by a node the subscription would end.
Re-newing the the subscription upon re-connect is not easily achievable, that's why we opted for a polling mode for now, where we start a block header subscription on every update iteration, that is only used once (when the subscription is made).
2021-05-20 13:05:51 +10:00
Daniel Karzel
f2e43ea565
Let testnet setup reflect mainnet
Our test values should reflect what we test on mainnet more closely to avoid bugs that are only observed when using mainnet settings.
2021-05-20 13:05:51 +10:00
Daniel Karzel
4dd696ebe1
Fix monero-wallet-rpc startup for mainnet CLI
There is no `--mainnet` flag.
Since we cannot just pass an empty string to `.arg()` we use the `.args()` method to pass nothing for mainnet and the respective flags for stagenet and testnet.
2021-05-20 13:05:51 +10:00
Daniel Karzel
1aaffb09f9
Refactor ASB test-/mainnet default dir init 2021-05-20 13:05:51 +10:00
Daniel Karzel
cfa85e0bad
Simplify ASB initial setup signature 2021-05-20 13:05:51 +10:00
Daniel Karzel
7f8af7926d
ASB config may specify finality confirmations
By default the finality confirmations of the network's `env::Config` will be applied and no finality confirmations will be persisted on disk in the config file.
It is however possible to set finality confirmations in the config file for bitcoin and monero for power users at their own risk.
If set the defaults will be overwritten with the parameter from the config file upon startup.
2021-05-20 13:05:51 +10:00
Daniel Karzel
af60d3bb54
Network check upon spot price request 2021-05-20 13:03:29 +10:00
Daniel Karzel
02974811ad
Activate mainnet for the ASB
To run the ASB on testnet, one actively has to provide the `--testnet` flag.
Mainnet and testnet data and config are separated into sub-folders, i.e. `{data/config-dir}/asb/testnet` and `{data-dir}/asb/mainnet`.
The initial setup is also per network. If (default) config for the network cannot be found the initial setup is triggered.
Startup includes network check to ensure the bitcoin/monero network in config file is the same as the one in the `env::Config`.

Note: Wallet initialization is done with the network set in the `env::Config`, the network saved in the config file is just to indicate what network the config file is for.
2021-05-20 12:58:39 +10:00
Daniel Karzel
9ac5b635d7
Introduce own de-/serializable monero::Network 2021-05-20 12:58:30 +10:00
Daniel Karzel
69cf12620d
Activate mainnet for the CLI
This includes testing CLI commandline args
Clap's `default_value_with` actually did not work on `Subcommand`s because the parent's flags were not picked up.
This was fixed by changing parameters dependent on testnet/mainnet to options.
This problem should have been detected by tests, that's why the command line parameter tests were finally (re-)added.

Thanks to @rishflab for some pre-work for this.
2021-05-20 12:57:58 +10:00
dependabot[bot]
6c206c7067
Bump libp2p from 0.37.1 to 0.38.0
Bumps [libp2p](https://github.com/libp2p/rust-libp2p) from 0.37.1 to 0.38.0.
- [Release notes](https://github.com/libp2p/rust-libp2p/releases)
- [Changelog](https://github.com/libp2p/rust-libp2p/blob/master/CHANGELOG.md)
- [Commits](https://github.com/libp2p/rust-libp2p/compare/v0.37.1...v0.38.0)

Signed-off-by: dependabot[bot] <support@github.com>
2021-05-18 06:33:38 +00:00
Thomas Eizinger
a3f436104f
Use tokio-tar from crates.io 2021-05-18 12:52:17 +10:00
Thomas Eizinger
75c5db53b2
Remove tokio-tar from workspace in favor of git dependency
Fixes #315.
Fixes #227.
2021-05-17 11:04:20 +10:00
Daniel Karzel
1cdc23de32
Explicitly specify monero-wallet-rpc deamon port
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
2021-05-14 09:50:52 +10:00
Daniel Karzel
343badbb4b
Remove duplication and cleanup
In the past we had problems with flags/parameter changes several times, where on instance was changed, buy another one was missed. This should mitigate this problem.
This patch introduces structs for all duplicated parameters and uses flatten to only have one point for changes.

Additionally removes all mentions of `alice` from the commands / variables. This code is on an application level and should not be concerned with swap protocol roles.
2021-05-14 09:50:50 +10:00
Daniel Karzel
4e1f3f82bd
Remove param from names
Did not add any value, more readable with just bitcoin and monero.
2021-05-14 09:50:49 +10:00
Daniel Karzel
657ac1e2e4
Bitcoin parameters that can be reused
Get rid of parameter duplication.
2021-05-14 09:50:47 +10:00
Daniel Karzel
a489564857
Remove unused Electrum HTTP default URL 2021-05-14 09:50:44 +10:00
Philipp Hoenisch
493545d07f
Improve logging for Swap Cli. 2021-05-12 16:31:32 +10:00
Philipp Hoenisch
4f45a26a83
Move check for max_giveable into the function. 2021-05-12 16:31:32 +10:00
Philipp Hoenisch
7fc5a47619
Add checks to max_giveable amount.
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.

Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees.
2021-05-12 16:31:32 +10:00
Philipp Hoenisch
26e0383e17
Apply suggestions from code review
Co-authored-by: Daniel Karzel <daniel.karzel@coblox.tech>
2021-05-11 16:06:44 +10:00
Philipp Hoenisch
fc0cceb180
Toggle json logs using commandline flag. 2021-05-11 15:28:25 +10:00
Philipp Hoenisch
316f95c65b
Always log whole causality chain for errors. 2021-05-11 15:27:53 +10:00
Philipp Hoenisch
c011e95062
Improve logging by adding details as fields instead of into the msg. 2021-05-11 15:27:53 +10:00
Philipp Hoenisch
1706b36800
Log exchange rate at each state. 2021-05-11 15:27:49 +10:00
bors[bot]
227c383d76
Merge #481
481: Min buy amount r=da-kami a=da-kami



Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-11 04:08:59 +00:00
Daniel Karzel
652aae9590
Introduce a minimum buy amount
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
2021-05-11 12:03:02 +10:00
Daniel Karzel
6d3cf0af91
Include too low balance into Alice's error 2021-05-11 12:03:02 +10:00
Daniel Karzel
1d62f4916c
Move max_buy and ask_spread into config
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.

The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.

```
...

[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
2021-05-11 12:02:57 +10:00
Philipp Hoenisch
330269a1e9
Update assert_weight test to account for a range up to 8 bytes.
Weights fluctuate because of the length of the signatures. Valid ecdsa signatures can have 68, 69, 70, 71, or 72 bytes. Since most of our transactions have 2 signatures the weight can be up to 8 bytes less than the static weight (4 bytes per signature).
2021-05-11 10:50:24 +10:00
Daniel Karzel
538b25a6dd
Only create config-directory on init success
We should only create the file if the user finished the initial setup correctly.
2021-05-11 10:32:25 +10:00
bors[bot]
d96e20a5b0
Merge #479
479: Use rust_decimal in estimate_fee function. r=bonomat a=bonomat

Follow-up PR from #466 

Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
2021-05-10 23:00:12 +00:00