* feat(gui): Partially availiable global state
* move tauri command into own module
* move commands list into src-tauri/src/commands.rs
* cleanup swap/src/cli/api.rs
* add contextRequirement attribute to PromiseInvokeButton
* amend
* allow wallet operation on partially availiable context
* improvements
* fix some linter errors
* limit amount of logs to 5k
* keep behaviour from before
* make sure if swapId is null useActiveSwapLogs, return no logs
* remove unused variable
* create ContextStatusType enum
* wip
* filter out destinations with zero amount
* add changelog entry
* do not use subtract_fee_from_outputs for multi lock tx
* make developer tip address configurable
* create developer_tip_monero_wallet in integration test
* add happy_path_alice_developer_tip integration test
* run happy_path_alice_developer_tip integration test in ci
* make stub tests
* document `developer_tip` and add log at startup
* take tip consideration when crafting quote
* remove double g++
* fix bash
* full stack trace in logs
* add DEFAULT_DEVELOPER_TIP_ADDRESS_STAGENET
* fix issue where --testnet could not be detected
* triple bitcoin testnet timelocks
* assert hardcoded developer tip address is on the correct network
* fix: interpret developer_tip = 0 as no tip in log at startup
* change developer_tip type to non-option, clamp tips below 100_00 piconero to 0
* create dedidcated TipConfig struct to replace (Decimal, monero::Address)
* small refactorings
* move tip config init out of of function call params
* refactoring
* unit tests wrong arguments passed in
* document `developer_tip` allows configuring your maker to donate a small part of swaps to funding further development of the project. This is disabled by default. You can manually enable it if you choose to do so. Set it to a number between 0 and 1. Setting it to 0.02 will donate 2% of each swap to the donation address of the project. The tip is sent by adding an additional output the Monero lock transaction of a swap. This means this will not impact document `maker.developer_tip` in docs/pages/becoming_a_maker/overview.mdx
* do not panic if cxx_addrs / cxx_amounts is null
* formatting, full error stack trace in swap/src/asb/event_loop.rs when we cannot construct a quote
* increase MIN_USEFUL_TIP_AMOUNT_PICONERO to 30m piconero (usd), correct params in unit tests
* prompt for developer_tip in orchestrator and asb wizard
* just fmt
* fmt
* address comments
* fmt
* spelling mistakes
---------
Co-authored-by: binarybaron <binarybaron@mail.mail>
* feat: use contrib/depends to build dependencies
* fix: bump min iOS sdk to 13
* fix: macos targets
* fix: show make output during build
fix: mingw linking issues
* chore: address AI review
* check target only once, stream make output to stdout, init ios project
* check whether patch is already applied before trying again
* copy contrib/depends to target dir and build dependencies there
* fix: use proper triplet for ios-sim
* fix(dprint): ignore monero_c, monero and monero-seed folders
* fix(swap): Missing import
* fix(ci): Add gperf as a required dependency for Linux
* add notes for unsafe usage to CLAUDE.md
* add clean command to justfile
* fix: minimumSystemVersion to 11.0 because tauri doesn't default behavior is wild
* update crunchy dependency to fix linux->windows cross compilation issue
* fix last commit
* link c++ std lib and libgcc statically on windows
* embed WebView2 Bootstrapper
* disable ccache on ios, update tauri deps, set minimumSystemVersion to 13.0
* fix
* fix: build env leaking into contrib/depends
* fix: version '-sim' in target triple 'arm64-apple-ios13.0-simulator-sim' is invalid
* get it working on ios
* Upgrade to nightly Rust toolchain for unstable features
- Change from Rust 1.85 to nightly to support yamux unstable features
- This resolves the unsigned_is_multiple_of compilation error
* fix
* WINDOWS WORKS
* Cargo.lock update
* android progress
* progress on gcc build script
* remove windows binary dependencies from git, running just prepare-windows-build will re-create them
* check for .dll's in src-tauri/build.rs and give hint how to build them
* document new build requirement
* add verification to gcc build script and error message when building windows from os other than linux
* fix windows build
* add just command for building windows ss
* fix script: remove sudo, copy dlls when finished
* move path setup to its own function
* fix
* try and fix ci
* extract setup to single action
* clean up ci
* add actions/checkout everywhere
* fix missing input prefix
* fix missing autoconf
* fix add build deps to env
* fix add build deps to env
* add deps for cross building windows
* fix action call
* only bundle dll's on windows
* use ubuntu-latest, install yarn, don't use swap
* add build dependencies, remove no longer existing docker test
* add aclocal to macos setup
* include macos build depends
* change platform -> host for setup-build-environment, use matrix for building binaries for all platforms
* fix: prepare build env for docker for ubuntu, don't get host value from matrix
* manually install rust target
* include openssl on ubuntu for sqlx
* build cargo cache once before building individual tests
* only manually install target if provided
* fix: don't need special syntax for variables in if condition
* fix libssl problem by upgrading sqlx cli
* fix: specify host for prepare_docker_tests
* a lot of fixes
---------
Co-authored-by: Czarek Nakamoto <cyjan@mrcyjanek.net>
Co-authored-by: einliterflasche <einliterflasche@pm.me>
Co-authored-by: binarybaron <you@example.com>
Co-authored-by: Raphael <81313171+Einliterflasche@users.noreply.github.com>
* feat(gui): Monero wallet
* progress
* refactor
* progress, dont delete wallet, re-fetch approvals and background periodically
* show transaction history correctly
* Enable fetching tx hashes
* Try add the wallet listener event callbacks, not working
* fix: Redeem XMR to internal main wallet, not temp wallet
* type safety
* refactoring of callback system
* make free floating functions generic
* refactor: Format files
* refactor(gui): Split wallet components and redesign balanceOverview component
* refactor(gui): Add action buttons and transaction section
* wrapper event listener
* progress, compiles
* works!
* WORKS! Event received on balance change
* refactor: format and slight refactorings and comments
* refactor(gui): Start with implementation of send dialog
- new number input
- new button variant and size
* add @tauri-apps/plugin-dialog
* feat(gui): Add permissions for file dialog
* fix(monero-harness): Compile issue
* feat(gui): Extract seed from Monero wallet and use for derivation, allow opening existing wallet file
* feat(gui): Always refresh the approval list from frontend when resolving
* fix(monero-rpc-pool): Implement Into<String> for ServerInfo
* fix(monero-sys): Use oneshot channel for all wallets
* feat(gui, monero-sys): Display recently opened wallets
* small refactors
* fix(gui): Enable background_sync, display temp "Loading..." if values are null
* feat(gui): Remove headers from pages, show selected navigation item
* feat(gui): Explicitly tell user if no swaps have been made yet
* feat(gui): send sync and history updates
* feat(gui): Fetch monero wallet details when context becomes availiable
* feat(gui): Display Monero primary address without modal
* feat(gui): Make "swap" button on wallet page take you to "/swap"
* feat(gui): Rework send modal, adjust number input, added send to field
* feat(gui): set block restore height, not working
* refactor(gui): Optimize number input and add support for switching between currency
* feat(gui): Display real fiat currency prices in send modal
* feat(gui): Add error message for too high send amount
* feat(gui): Modern UI for SeedSelectionDialog
* feat(gui): Wrap MoneroWalletActions
* wip
* refactoring approval callback
* feat(gui): Send Direction of Transaction in History to Frontend
* feat(gui): Let user approve transaction before publishing
* feat: Display 8 digits for Monero amounts by default
* feat(monero-sys): Store pending (non published) transactions in Mutex map inside wallet thread
This allows seperating signing and publishing transactions cleanly
* dprint fmt
* fix(gui): Refresh Monero wallet history C++ struct before serializing
* feat(monero-rpc-pool): Fail after three JSON-RPC errors
* feat(monero-sys): Add wrapper around verify_wallet_password
* feat(gui): Allow opening password-protected Wallets
* refactor: fmt, remove receive button
* fix(gui): Convert to XMR before converting into Fiat
* feat(gui): Add dialog for setting restore height
* feat(gui): block height can be changed, blocks when too low
* refactor(monero-sys): Remove old WalletListener code
* feat(gui): Continually ask for user to select wallet and enter password, if user rejects, offer to select different wallet
* refactor(swap): Extract "select Monero wallet" into own function
* refactor(tauri): Dont kill monero-wallet-rpc
* refactor(tauri): Avoid multiple concurrent Contexts starting
* refactor: Change "Cancel" to "Change wallet" on PasswordEntryDialog
* feat(gui): show curent block height, fix blockage
* Cargo.lock update
* refactor(monero-sys): Use match instead of is_err() and expect(...)
* refactor: better context for WalletHandle constructor method errors handling
* refactor(monero-sys): Common open_with<F>(path: String, daemon: Daemon, wallet_op: F) function
* feat: check empty password before requeston password for wallet
* feat: Remove "Checking for available remote nodes" from frontend
* feat(gui): Allow sweeping entire Monero balance
* feat(monero-rpc-pool): Keep alive TCP connections, do not record JSON-RPC errors as failure if >=3 nodes failed
If >=3 nodes failed we assume it was an actual issue on our side, not an issue with the node
* refactor(swap): Remove dead code
* add comment to WalletHandleListener::on_refreshed{...}
* feat(gui): show current block height in the field
* refactor: remove unused UserCancelledError;
* refactor: No Arc<Mutex<_>> for Pending TXs map
* refactor: remove redundant } catch (error) {
* feat: add our new crates to `OUR_CRATES` in tracing util
* fix(gui): Add math.ceil to piconero conversion to ensure integer
* fix(gui): Close menu when option is clicked
* review and improve/reduce uses of unsafe, also remove unique_ptr wrapper around TransactionHistory to avoid double free
* fix(gui): Use monero amount from units.tsx
* fix(gui): Use PromiseInvokeButton for simplification for approving of send transaction
* update comment, rename function
* refactor(gui): Fix alignment of amounts
* refactor(gui): Remove sending and refreshing states from wallet
* fix(cli, gui): use old seed flow on no tauri, fix minor issues in gui
* fix: use the new named function
* refactor(gui): Add skeletons for monero wallet when still loading
* refactor(gui): Remove isLoading from wallet slice
* feat(gui): Add success dialog after send transaction was approved
* fix(gui): Floor piconero amount in sendMoneroTransaction
* feat(gui): Allow view on explorer button on send success modal
* feat(backend): save the wallet state on events
* fix(structure): move throttle into its own crate
* fix(log): remove spammy logs
* fix(logs): log folder in confid
* remove "sync progress: " log
* small refactors
* save wallet at most every 60s
* remove useless logs
* underscore unused variables
* feat(gui): Add timestamp of the tx
* feat(gui): Add the legacy wallet init option
* legac ybutton
* Fix(gui, asb): reverse the log config
remove log in bridge.h
cleanup
* use none for .store(..)
* display dot for running swap
---------
Co-authored-by: Maksim Kirillov <maksim.kirillov@staticlabs.de>
Co-authored-by: b-enedict <benedict.seuss@gmail.com>
Co-authored-by: einliterflasche <einliterflasche@pm.me>
* task(gui): update to mui v5
* task(gui): use sx prop instead of system props
* task(gui): update to mui v6 and replace makeStyles with sx prop
* task(gui): update to mui v7
* task(gui): update react
* fix(gui): fix import
* task(gui): adjust theme and few components to fix migration introduced styling errors
* fix(gui): animation issues with text field animations
* fix(gui): remove 'darker' theme and make 'dark' theme the default
- with the new update 'dark' theme is already quite dark and therefore a 'darker' theme not necessary
- the default theme is set to 'dark' now in settings initialization
* feat(tooling): Upgrade dprint to 0.50.0, eslint config, prettier, justfile commands
- Upgrade dprint to 0.50.0
- Use sane default eslint config (fairly permissive)
- `dprint fmt` now runs prettier for the `src-gui` folder
- Added `check_gui_eslint`, `check_gui_tsc` and `check_gui` commands
* refactor: fix a few eslint errors
* dprint fmt
* fix tsc complains
* nitpick: small spacing issue
---------
Co-authored-by: Binarybaron <binarybaron@protonmail.com>
Co-authored-by: Mohan <86064887+binarybaron@users.noreply.github.com>
This PR tackles #92
- Add the `tauri-plugin-cli` (only on desktop)
- Check in the frontend if the `--testnet` flag is set. If it's set we pass `testnet=true` to the `initialize_context` command on invokation
- We add the `vite-plugin-top-level-await` to allow top level await in all browsers
- Remove the `bitcoin_confirmation_target` from settings for simplicity
- Implemented dual persistence strategy:
- **User Settings**: Persisted across app restarts using `tauri-plugin-store`.
- **Transient State**: Persisted across page reloads using `sessionStorage`.
- Added `settingsSlice` reducer for managing persistent user settings.
- Updated Redux store configuration to handle multiple persistence layers.
- Added a new Settings page in the GUI where users can specify custom Electrum RPC URLs for Bitcoin and Monero node URLs.
- Users can input their preferred Electrum server (`ssl://host:port`) and Monero daemon (`http://host:port`).
- Input fields include validation to ensure correct URL formats.
- Settings persist across application restarts using Tauri's storage plugin.
- A reset option is available to revert to default settings.
- Improved the Daemon Controller in the Help page:
- Renamed `RpcControlBox` to `DaemonControlBox` for clarity.
- Users can now start the daemon manually if it isn't running or has failed.
- Added a "Restart GUI" button to apply new settings immediately.
- Displayed the daemon's status within the controller.
- Upgraded Tauri and related plugins to stable version `2.0.0`:
- Updated `tauri`, `tauri-build`, and `tauri-utils` to `2.0.0`.
- Ensured compatibility with the latest stable release.
- Updated Tauri plugins to version `2.0.0`:
- `tauri-plugin-clipboard-manager`
- `tauri-plugin-shell`
- Added new plugins:
- `tauri-plugin-store` for settings persistence.
- `tauri-plugin-process` to enable application relaunch.
- Deferred Context initialization until explicitly triggered from the frontend.
- Moved Context setup from the `setup` function to a new `initialize_context` Tauri command.
- Allows the application to start without immediately initializing the backend context.
- Context initialization now considers user-provided settings for Electrum and Monero nodes.
- Introduced a `ValidatedTextField` component for form inputs with validation logic.
- Provides immediate feedback on input validity.
- Used in the Settings page for Electrum and Monero node URLs.
- If the user provides an override Monero remote daemon, we check if it reachable and on the correct network before starting the `monero-wallet-rpc`
- Changed `bitcoin_confirmation_target` type from `usize` to `u16`.
