We retry to lock the Monero wallet until we succeed or until the cancel timelock expires.
This is necessary because the monero-wallet-rpc can sometimes error out due to various reasons, such as
- no connection to the daemon
- "failed to get output distribution"
See https://github.com/comit-network/xmr-btc-swap/issues/1726
allow --change-address to be omitted and default to internal wallet address (#1709)
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
Co-authored-by: Byron Hambly <byron@hambly.dev>
Oftentimes we fail to check the status of the Monero transaction on the first try (because it hasn't been registered on our Monero daemon yet, it takes a few seconds).
By decreasing the check interval from the default of 2 minutes to a 10th of that, we ensure that Bob get's his transfer proof faster.
This PR changes the following behaviour in the refresh functionality of the monero wallet
- Allows for multiple retries because in some cases users have experienced an issue where the wallet rpc returns `no connection to daemon` even though the daemon is available. I'm not 100% sure why this happens but retrying often fixes the issue
- Print the current sync height after each failed attempt at syncing to see how far we've come
- The `monero-wallet-rpc` is started with the `--no-initial-sync` flag which ensures that as soon as it's started, it's ready to respond to requests
- The `monero-wallet-rpc` was upgraded to `v0.18.3.1` because this PR https://github.com/monero-project/monero/pull/8941 has improved some of the issues mentioned above
This PR is part of a larger effort to fix this issue https://github.com/comit-network/xmr-btc-swap/issues/1432
* fix (Bob): Check if Bitcoin redeem transaction was published before transitioning to CancelTimelockExpired
---------
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
Co-authored-by: Byron Hambly <bhambly@blockstream.com>
* ci: add cargo check on rust stable
* refactor: upgrade secp256kfun and fix resulting issues
* build(deps): update sigma_fun and ecdsa_fun to a52142cf7f
#1520#1521
* chore: fix clippy issue
* update to 91112f80b24
* bump to 294de1721add
* chore(deps): remove spectral
spectral fails to compile on rust stable 1.76 due to dep on deprecated
rustc-serialize
* secp256kfun: update to 7da9d277 and set rev in manifest
* update to 6fdc5d8
* switch to crates.io versions of ecdsa_fun and sigma_fun
* ci: update toolchain to 1.74 and fix draft action
* clippy fixes
---------
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
* saving: implementing internal api shared by cli and rpc server
* writing async rpc methods and using arc for shared struct references
* cleaning up, renamed Init to Context
* saving: cleaning up and initial work for tests
* Respond with bitcoin withdraw txid
* Print RPC server address
* Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints
* fixing tests in cli module
* uncommenting and fixing more tests
* split api module and propagate errors with rpc server
* moving methods to api and validating addresses for rpc
* add broadcast channel to handle shutdowns gracefully and prepare for RPC server test
* added files
* Update rpc.rs
* adding new unfinished RPC tests
* updating rpc-server tests
* fixing warnings
* fixing formatting and cargo clippy warnings
* fix missing import in test
* fix: add data_dir to config to make config command work
* set server listen address manually and return file locations in JSON on Config
* Add called api method and swap_id to tracing for context, reduced boilerplate
* Pass server_address properly to RpcServer
* Update Cargo.lock
* dprint fmt
* Add cancel_refund RPC endpoint
* Combine Cmd and Params
* Disallow concurrent swaps
* Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint
* Return wallet descriptor to RPC API caller
* Append all cli logs to single log file
After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter
* Add get_swap_expired_timelock timelock, other small refactoring
- Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished.
- Rename current_epoch to expired_timelock to enforce consistent method names
- Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct
- Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen
* initiating swaps in a separate task and handling shutdown signals with broadcast queues
* Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method
* WIP: Struct for concurrent swaps manager
* Ensure correct tracing spans
* Add note regarding Request, Method structs
* Update request.rs
* Add tracing span attribute log_reference_id to logs caused by rpc call
* Sync bitcoin wallet before initial max_giveable call
* use Span::current() to pass down to tracing span to spawned tasks
* Remove unused shutdown channel
* Add `get_monero_recovery_info` RPC endpoint
- Add `get_monero_recovery_info` RPC endpoint
- format PrivateViewKey using Display
* Rename `Method::RawHistory` to `Method::GetRawStates`
* Wait for swap to be suspended after sending signal
* Remove notes
* Add tracing span attribute log_reference_id to logs caused by rpc call
* Sync bitcoin wallet before initial max_giveable call
* use Span::current() to pass down to tracing span to spawned tasks
* Remove unused shutdown channel
* Add `get_monero_recovery_info` RPC endpoint
- Add `get_monero_recovery_info` RPC endpoint
- format PrivateViewKey using Display
* Rename `Method::RawHistory` to `Method::GetRawStates`
* Wait for swap to be suspended after sending signal
* Return additonal info on GetSwapInfo
* Update wallet.rs
* fix compile issues for tests and use serial_test crate
* fix rpc tests, only check for RPC errors and not returned values
* Rename `get_raw_history` tp `get_raw_states`
* Fix typo in rpc server stopped tracing log
* Remove unnecessary success property on suspend_current_swap response
* fixing test_cli_arguments and other tests
* WIP: RPC server integration tests
* WIP: Integration tests for RPC server
* Update rpc tests
* fix compile and warnings in tests/rpc.rs
* test: fix assert
* clippy --fix
* remove otp file
* cargo clippy fixes
* move resume swap initialization code out of spawned task
* Use `in_current_span` to pass down tracing span to spawned tasks
* moving buy_xmr initialization code out of spawned tasks
* cargo fmt
* Moving swap initialization code inside tokio select block to handle swap lock release logic
* Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr
* Spawn event loop before requesting quote
* Release swap lock after receiving shutdown signal
* Remove inner tokio::select in BuyXmr and Resume
* Improve debug text for swap resume
* Return error to API caller if bid quote request fails
* Print error if one occurs during process invoked by API call
* Return bid quote to API caller
* Use type safe query! macro for database retrieval of states
* Return tx_lock_fee to API caller on GetSwapInfo call
Update request.rs
* Allow API caller to retrieve last synced bitcoin balane and avoid costly sync
* Return restore height on MoneroRecovery command to API Caller
* Include entire error cause-chain in API response
* Add span to bitcoin wallet logs
* Log event loop connection properties as tracing fields
* Wait for background tasks to complete before exiting CLI
* clippy
* specify sqlx patch version explicitly
* remove mem::forget and replace with _guard
* ci: add rpc test job
* test: wrap rpc test in #[cfg(test)]
* add missing tokio::test attribute
* fix and merge rpc tests, parse uuuid and multiaddr from serde_json value
* default Tor socks port to 9050, Cargo fmt
* Update swap/sqlite_dev_setup.sh: add version
Co-authored-by: Byron Hambly <byron@hambly.dev>
* ci: free up space on ubuntu test job
* Update swap/src/bitcoin/wallet.rs
Co-authored-by: Byron Hambly <byron@hambly.dev>
* Update swap/src/bitcoin/wallet.rs
Co-authored-by: Byron Hambly <byron@hambly.dev>
* fmt
---------
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
Co-authored-by: Byron Hambly <byron@hambly.dev>
* Upgrade monero-wallet-rpc to `v0.18.3.1`
* Give feedback to user about state of monero refresh and retry if fails
This commit changes the following behaviour in the refresh functionality of the monero wallet
- Allows for multiple retries because in some cases users have experienced an issue where the wallet rpc returns `no connection to daemon` even though the daemon is available. I'm not 100% sure why this happens but retrying often fixes the issue
- Attempt to print the current sync height while the wallet is syncing. This only works to some degree because the `monero-wallet-rpc` stops responding (or takes a long time to respond) while it's refreshing
- The `monero-wallet-rpc` is started with the `--no-initial-sync` flag which ensures that as soon as it's started, it's ready to respond to requests
---------
Co-authored-by: Byron Hambly <bhambly@blockstream.com>
Co-authored-by: Byron Hambly <byron@hambly.dev>
* Bump Monero CLI for macos aarch64 to match other platforms
* Check hash on download of monero cli
* change panic to bail
---------
Co-authored-by: Byron Hambly <bhambly@blockstream.com>
