This subcommand has been introduced to make it easy for users to find
the location of the deprecated sled database in case they wish to delete
it. This feature should also resolve difficulties users were facing when
trying to find where xmr-btc-swap was storing their data.
769: Change message log level to debug to allow enabling through flag r=rishflab a=rishflab
We do not have a way to enable tracing through a command line
argument so it did not make sense to have these messages set to
trace. Ideally a trace flag should be added but it is not that
straightforward with structopt. We could add a --log-level arg
that allows you select a log level but this is verbose.
Closes#759
Co-authored-by: rishflab <rishflab@hotmail.com>
We do not have a way to enable tracing through a command line
argument so it did not make sense to have these messages set to
trace. Ideally a trace flag should be added but it is not that
straightforward with structopt. We could add a --log-level arg
that allows you select a log level but this is verbose.
Previously logs were only timestamped when the ASB was run in an
interactive terminal or if the logs were output as JSON. JSON logs and
ASB output in an interactive terminal are no longer timestamped by
default.
721: Make --force the default behaviour for manual recovery r=rishflab a=rishflab
Also removed the --force flag
Co-authored-by: rishflab <rishflab@hotmail.com>
Alice and Bob can both submit cancel. A scenario exists where one of
them may try and manually cancel but the other party has already
published cancel. Log a message to notify the user this has happened.
Add reusable function to check error for bitcoin rpc error code
Remove the force flag. There is a resume command that tries to
gracefully restarts the protocol and tries to execute the happy path.
Remove e2e tests which test the --force flag.
The "swap started" message was being too early, before the ASB had
confirmed they could perform the swap. This was leading to a confusing
scenario where the UI incorrectly indicated to the user that the swap
had started. Users were trying to resume or refund the swaps but there
was no swap id in the db. Moving this message after the swap setup
should resolve this problem. Closes#756, #729, #560.
691: Bump time from 0.2.27 to 0.3.2 r=thomaseizinger a=dependabot[bot]
Bumps [time](https://github.com/time-rs/time) from 0.2.27 to 0.3.2.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/time-rs/time/blob/main/CHANGELOG.md">time's changelog</a>.</em></p>
<blockquote>
<h2>0.3.2 [2021-08-25]</h2>
<h3>Added</h3>
<ul>
<li><code>Instant</code> is now <code>#[repr(transparent)]</code></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Constructing a <code>Date</code> from its ISO year, week, and weekday now returns the correct value in all
circumstances. Previously, dates with an ISO year less than zero may have returned incorrect
values. This affects both the <code>Date::from_iso_week_date</code> method and the <code>date!</code> macro.</li>
</ul>
<h2>0.3.1 [2021-08-06]</h2>
<h3>Added</h3>
<ul>
<li><code>Month</code> now implements <code>TryFrom<u8></code></li>
<li><code>From<Month></code> is now implemented for <code>u8</code></li>
<li>The parser now accepts "5 PM" and similar as a valid time. Only the 12-hour clock hour and the
AM/PM suffix may be present; any other components representing a time will cause an error (this
exact behavior is not guaranteed).</li>
<li>The <code>time!</code> macro accepts the "5 PM" syntax with the same restriction.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Macros that have a time component (<code>time!</code> and <code>datetime!</code>) no longer accept "0:00 AM" and
similar. This was previously erroneously accepted.</li>
</ul>
<h2>0.3.0 [2021-07-30]</h2>
<h3>Added</h3>
<ul>
<li><code>datetime!</code> macro, which allows the construction of a statically verified <code>PrimitiveDateTime</code> or
<code>OffsetDateTime</code>.</li>
<li><code>PrimitiveDateTime::replace_time</code></li>
<li><code>PrimitiveDateTime::replace_date</code></li>
<li><code>OffsetDateTime::replace_time</code></li>
<li><code>OffsetDateTime::replace_date</code></li>
<li><code>OffsetDateTime::replace_date_time</code></li>
<li><code>OffsetDateTime::replace_offset</code></li>
<li><code>#![no_alloc]</code> support</li>
<li><code>Date::to_iso_week_date</code>, replacing <code>Date::iso_year_week</code></li>
<li><code>Date::MIN</code></li>
<li><code>Date::MAX</code></li>
<li><code>UtcOffset::from_hms</code></li>
<li><code>UtcOffset::from_whole_seconds</code></li>
<li><code>UtcOffset::as_hms</code></li>
<li><code>UtcOffset::whole_hours</code></li>
<li><code>UtcOffset::whole_minutes</code></li>
<li><code>UtcOffset::minutes_past_hour</code></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="4020fd632f"><code>4020fd6</code></a> v0.3.2 release</li>
<li><a href="ffb028e4d6"><code>ffb028e</code></a> Fix constructing dates with negative ISO year</li>
<li><a href="635ef21646"><code>635ef21</code></a> Add additional roundtrip tests</li>
<li><a href="fefc8c765e"><code>fefc8c7</code></a> Warn on future deprecations</li>
<li><a href="a83996974f"><code>a839969</code></a> Use <code>cargo-criterion</code> for benchmarks</li>
<li><a href="6117ab74a2"><code>6117ab7</code></a> Pin trybuild</li>
<li><a href="12673bfd18"><code>12673bf</code></a> Make <code>Instant</code> <code>#[repr(transparent)]</code></li>
<li><a href="e52e355689"><code>e52e355</code></a> Use more consistent measure for benchmarks</li>
<li><a href="102437e1d0"><code>102437e</code></a> Update CI for trybuild</li>
<li><a href="656f7d98ce"><code>656f7d9</code></a> Move to trybuild</li>
<li>Additional commits viewable in <a href="https://github.com/time-rs/time/compare/v0.2.27...v0.3.2">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
704: Allow withdrawing and viewing of the bitcoin balance on swap-cli r=rishflab a=devbordecraft
Same mechanics of the ASB but on swap-cli as discussed in #694
Co-authored-by: devbordecraft <devbordecraft>
Bob was timing out if the encrypted signature could not be sent in 60
seconds. This behaviour is unnecessary because we are racing against
the cancel timelock anyway. By timing out before this, we remove the
opportunity for bob and alice to re-establish a connection.
Previously, we relied on the wallet in the `monero-wallet-rpc` daemon
to be loaded as we do on startup. As a consequence of this expectation,
restarting `monero-wallet-rpc` to fix bugs like #652 resulted in the
ASB no longer operating correctly.
To fix this, we now load the wallet on-demand in case the daemon responds
with the error code -13.
Ideally, we would implement this behaviour generically using the proxy
pattern on the `MoneroWalletRpc` trait. Unfortunately, when attempting
to do so we uncover a limitation in the design of `jsonrpc_client`.
This limitation is tracked in https://github.com/thomaseizinger/rust-jsonrpc-client/issues/47.
Once fixed, we can implement this logic in a more robust way that is not
tied to the `check_tx_key` RPC call but applies to any RPC call automatically.
Per #660, moving the log line on a peer closing connection outside of a swap to DEBUG instead of WARN, as there is no action that can be taken by the ASB owner.
631: Bump tokio-tungstenite from 0.14.0 to 0.15.0 r=thomaseizinger a=dependabot[bot]
Bumps [tokio-tungstenite](https://github.com/snapview/tokio-tungstenite) from 0.14.0 to 0.15.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/snapview/tokio-tungstenite/blob/master/CHANGELOG.md">tokio-tungstenite's changelog</a>.</em></p>
<blockquote>
<h1>0.15.0</h1>
<ul>
<li>Update the <code>tungstenite-rs</code> version to <code>0.14.0</code>,
<a href="https://github.com/snapview/tungstenite-rs/blob/master/CHANGELOG.md#0140">check <code>tungstenite-rs</code> release for more details</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="614a4b12eb"><code>614a4b1</code></a> Update the changelog</li>
<li><a href="6e1005f968"><code>6e1005f</code></a> Bump version</li>
<li><a href="44190cfef2"><code>44190cf</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/174">#174</a> from SyedAhkam/master</li>
<li><a href="bed60c753d"><code>bed60c7</code></a> Derive <code>Debug</code> trait for <code>MaybeTlsStream</code></li>
<li><a href="6ce3591789"><code>6ce3591</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/164">#164</a> from torlenor/document_tls_features</li>
<li><a href="4686ae0041"><code>4686ae0</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/165">#165</a> from snapview/fix-autobahn</li>
<li><a href="e861b1be06"><code>e861b1b</code></a> ci: do not use Travis, superseded by GH Actions</li>
<li><a href="12e3dca65a"><code>12e3dca</code></a> tests: fix confusing wrong paths in the scripts</li>
<li><a href="639b106739"><code>639b106</code></a> tests: use autobahn test suite as docker image</li>
<li><a href="c9b886ea72"><code>c9b886e</code></a> Add documentation about TLS features to README</li>
<li>Additional commits viewable in <a href="https://github.com/snapview/tokio-tungstenite/compare/v0.14.0...v0.15.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
641: Bump thomaseizinger/create-pull-request from 1.1.0 to 1.2.1 r=thomaseizinger a=dependabot[bot]
Bumps [thomaseizinger/create-pull-request](https://github.com/thomaseizinger/create-pull-request) from 1.1.0 to 1.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/releases">thomaseizinger/create-pull-request's releases</a>.</em></p>
<blockquote>
<h2>1.2.1</h2>
<p>No release notes provided.</p>
<h2>1.2.0</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/blob/master/CHANGELOG.md">thomaseizinger/create-pull-request's changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<p>All notable changes to this project will be documented in this file.</p>
<p>The format is based on <a href="https://keepachangelog.com/en/1.0.0/">Keep a Changelog</a>,
and this project adheres to <a href="https://semver.org/spec/v2.0.0.html">Semantic Versioning</a>.</p>
<h2>[Unreleased]</h2>
<h2>[1.2.0] - 2021-07-26</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="603900158e"><code>6039001</code></a> Use github.actor instead of hardcoded name</li>
<li><a href="f3b6912a65"><code>f3b6912</code></a> Added labels to action.yml (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/75">#75</a>)</li>
<li><a href="8aa44c8cb5"><code>8aa44c8</code></a> Update CHANGELOG.md</li>
<li><a href="0afa85c37f"><code>0afa85c</code></a> Added support for labels and existing PR check (v2 from master) (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/61">#61</a>)</li>
<li><a href="1737745289"><code>1737745</code></a> Add missing links to changelog</li>
<li><a href="2d426a48b7"><code>2d426a4</code></a> Create CONTRIBUTING.md</li>
<li><a href="296164f67d"><code>296164f</code></a> Misc (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/52">#52</a>)</li>
<li>See full diff in <a href="https://github.com/thomaseizinger/create-pull-request/compare/1.1.0...1.2.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
615: Update default Monero node URLs and info r=thomaseizinger a=da-kami
xmr.to nodes are not served at the xmr.to domain but moved to melo.tools
Co-authored-by: Daniel Karzel <daniel@comit.network>
The Rust compiler doesn't guarantee in which order field initialization
are executed. By extracting them, we can make sure they run in a certain
order. This will be important as we add more validations that can
fail.
For builds made directly on the tag, the output of `--version` will
not change. For builds not made on a tagged commit, the output will
look something like this:
```
> swap --version
swap 0.7.0-117-g93161f9
```
Fixes#409.
We emit an `info!` log for every peer that we discover but only ever
emitted a `debug!` log if we fail to connect. This leads to a situation
where the user would run `swap list-sellers`, the logs would say
"Discovered XYZ at ABC" but then get a potentially empty table.
To not confuse the user, we include unreachable nodes in the table output.
For example:
```
Connected to rendezvous point, discovering nodes in 'xmr-btc-swap-testnet' namespace ...
Discovered peer 12D3KooWPZ69DRp4wbGB3wJsxxsg1XW1EVZ2evtVwcARCF3a1nrx at /dns4/ac4hgzmsmekwekjbdl77brufqqbylddugzze4tel6qsnlympgmr46iid.onion/tcp/8765
+-------+--------------+--------------+-------------+----------------------------------------------------------------------------------------------------------------------------------------+
| PRICE | MIN_QUANTITY | MAX_QUANTITY | STATUS | ADDRESS |
+============================================================================================================================================================================================+
| ??? | ??? | ??? | Unreachable | /dns4/ac4hgzmsmekwekjbdl77brufqqbylddugzze4tel6qsnlympgmr46iid.onion/tcp/8765/p2p/12D3KooWPZ69DRp4wbGB3wJsxxsg1XW1EVZ2evtVwcARCF3a1nrx |
+-------+--------------+--------------+-------------+----------------------------------------------------------------------------------------------------------------------------------------+
```
1. Clearly separate the log messages from any fields that are
captured. The log message itself should be meaningful because it
depends on the underlying formatter, how/if the fields are displayed.
2. Some log messages had very little context, expand that.
3. Wording of errors was inconsistent, hopefully all errors should
now start with `Failed to ...`.
4. Some log messages were duplicated across multiple layers (like opening
the database).
5. Some log messages were split into two where one part is now an `error!`
and the 2nd part is an `info!` on what is happening next.
6. Where appropriate, punctuation has been removed to not interrupt
the reader's flow.
Log statements end up getting changed constantly and having to clean
up imports after that is annoying, for example, if the last `info!`
in a file disappears, you end up with an unused import warning.
Fully qualifying tracing's macros prevents that and also communicates
clearly that we are using tracing and not log.
Sorting `psbt.output` by `witness_script` is at times pointless
because it might be set to `None`. To be more robust, we pattern
match against the produced transaction.
The CLI's transport doesn't support memory addresses and it also shouldn't support those by default. To be able to use it in tests, we extend the `SwarmExt` trait with the ability to listen on local TCP addresses with a random port.
The rendezvous protocol allows us to register all of our external
addresses. Hence, the first step is to allow the user to configure
external addresses as part of the config. In the future, there might
be an automated way of determining these.
To register with a rendezvous node, the user needs to configure which
one. CoBloX is running a rendezvous node that acts as the default by
every spec-compliant node will do the job just fine. This behaviour
is optional which is why our custom behaviour is wrapped in a `Toggle`.
We also want our node to re-register after half the time of the
registration has passed. To make this simpler and allow for testing in
isolation, we create a custom behaviour that wraps the libp2p rendezvous
behaviour.
This command uses a rendezvous node to find sellers (i.e. ASBs) and query them for quotes.
Sellers, that can be dialed and queried for a quote will be listed.
604: Bump torut from 0.1.9 to 0.1.10 r=thomaseizinger a=dependabot[bot]
Bumps [torut](https://github.com/teawithsand/torut) from 0.1.9 to 0.1.10.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/teawithsand/torut/releases">torut's releases</a>.</em></p>
<blockquote>
<h2>Release 0.1.10</h2>
<p>Deprecated onion services V2 and all stuff associated with it.
Updated tokio version.
Implemented std::error::Error for error types in this crate, support for these errors is very basic and all that was done was implementing Error trait for existing error types. No error structure refactoring was done.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="8a26ddde79"><code>8a26ddd</code></a> Implemented std::error::Error for error types</li>
<li><a href="c5cee8a369"><code>c5cee8a</code></a> Implemented std::error::Error for error types</li>
<li><a href="caed51d697"><code>caed51d</code></a> Deprecated v2 onion service stuff</li>
<li><a href="87bcde20bb"><code>87bcde2</code></a> Updated tokio version</li>
<li>See full diff in <a href="https://github.com/teawithsand/torut/compare/v0.1.9...v0.1.10">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
605: Merge `--seller-addr` and `--seller-peer-id` into `--seller` parameter r=thomaseizinger a=thomaseizinger
This simplifies the CLI's interface.
It wills also play nicely with https://github.com/comit-network/xmr-btc-swap/pull/593.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Instead of formatting to a string right away, we parse the multiaddress
into a stricter data structure that only allows the kind of addresses
we can dial through Tor.
This will allow us to perform further checks on the parsed address.
585: Configurable kraken websocket url via the ASB config r=thomaseizinger a=cimble-code
- Allows the ASB operator to configure a custom kraken websocket url via the ASB config.
- Addresses the issue of price control first brought up [here](https://github.com/comit-network/xmr-btc-swap/discussions/571)
> Gotya.
There is a relatively easy to implement (but temporary) solution for that. We could let the user configure the kraken websocket url via the ASB config. That way you can plug in your own service. The only requirement is that your service publishes prices updates in the same format as [kraken](https://docs.kraken.com/websockets/), e.g. :
_Originally posted by @bonomat in https://github.com/comit-network/xmr-btc-swap/discussions/571#discussioncomment-885535_
Co-authored-by: Your Name <you@example.com>
Closing the connection upon completing the `swap_setup` protocol caused problems on the ASB side, because the CLI would close the connection before the last message was properly processed. This would result in swaps going into execution on the CLI side, but not on the ASB side.
The CLI ensures an open connection to the ASB over the complete course of a swap. So it does not make much sense to allow a protocol to close the connection (the CLI would immediately redial).
For the Alice we set the initial `KeepAlive` to `10` seconds because Bob is expected to request a spot price in reasonable time after opening a connection on the protocol. Since Tor connections can take some time we set 10 seconds fow now for resilience.
Given that we combined the `spot_price` and the `execution_setup` messaging into one protocol we should allow the protocol to take longer than 60 seconds to complete.
This is especially important for connections over Tor, where messaging can take significantly longer than over clearnet.
I ran some tests with Tor and did not run into issues with the 60 seconds, but we get very close to the timeout, so we better make it more resilient by adding more time.
When swapping on testnet we ran into a problem where the CLI started the swap after sending all messages successfully, but the ASB ran into a `connection closed` error at the end of the `swap_setup` and the swap state machine was never actually triggered.
Flushing and closing the stream on both sides should ensure that we don't run into this problem and both parties gracefully exit the protocol.
Some network and application specific code does not belong in the protocol module and was moved.
Eventloop, recovery and the outside behaviour were moved to the respective application module because they are application specific.
The `swap_setup` was moved into the network module because upon change both sides will have to be changed and should thus stay close together.
Having `spot_price` and `execution_setup` as separate protocols did not bring any advantages, but was problematic because we had to ensure that `execution_setup` would be triggered after `spot_price`. Because of this dependency it is better to combine the protocols into one.
Combining the protocols also allows a refactoring to get rid of the `libp2p-async-await` dependency.
Alice always listens for the `swap_setup` protocol. When Bob opens a substream on that protocol the spot price is communicated, and then all execution setup messages (swap-id and signature exchange).
Includes a new state that is used to await BTC lock tx finality. Upon starting the swap we initially only wait for the BTC lock tx to be seen in the mempool.
This is guarded by a short timeout (3 mins), because it is assumed that in the current setup (sport_price + execution_setup only triggered upon funds being available already) the lock transaction should be picked up almost instanly after the execution setup succeeded.
Similar to the CLI the ASB has to ensure that the execution_setup is executed within a certain time.
Without a timeout the price (returned by `spot_price` would be guaranteed with the CLI indefinitely.
It seems the current chosen channel timeouts are still not optimal.
I ran into issues with swapping over Tor and traced them down to the CLI timeout of the bmrng channel.
It appears that the ASB was not running as quick as the CLI, which caused a timeout on the CLI side (in addition to the delay when sending messages over Tor).
Only `execution_setup` caused the problem so far, but I would recommend changing all the channel timeouts to one minute to avoid this problem.
581: Remove dead code r=thomaseizinger a=da-kami
583: Bump reqwest from 0.11.3 to 0.11.4 r=thomaseizinger a=dependabot[bot]
Bumps [reqwest](https://github.com/seanmonstar/reqwest) from 0.11.3 to 0.11.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/releases">reqwest's releases</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing "invalid" certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/blob/master/CHANGELOG.md">reqwest's changelog</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing "invalid" certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="f5fe17876a"><code>f5fe178</code></a> v0.11.4</li>
<li><a href="8e5af459e5"><code>8e5af45</code></a> Allow overriding of DNS resolution to specified IP addresses(<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/561">#561</a>) (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1277">#1277</a>)</li>
<li><a href="c4388fcff9"><code>c4388fc</code></a> WASM: Add <code>try_clone</code> implementations to <code>Request</code> and <code>RequestBuilder</code> (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1286">#1286</a>)</li>
<li><a href="b48cb4a5aa"><code>b48cb4a</code></a> Add native-tls-alpn feature (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1283">#1283</a>)</li>
<li><a href="bbeb1ede4e"><code>bbeb1ed</code></a> Bump ssri from 6.0.1 to 6.0.2 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1262">#1262</a>)</li>
<li><a href="841d47c6a2"><code>841d47c</code></a> Bump url-parse from 1.4.7 to 1.5.1 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1267">#1267</a>)</li>
<li><a href="33bc7939b4"><code>33bc793</code></a> Bump lodash from 4.17.19 to 4.17.21 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1269">#1269</a>)</li>
<li><a href="b0af278f78"><code>b0af278</code></a> Implement "default" functions of the trait to fix "insecure" mode (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1259">#1259</a>)</li>
<li><a href="8d3e27966c"><code>8d3e279</code></a> use ZlibDecoder for deflate responses (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1257">#1257</a>)</li>
<li><a href="b88f309339"><code>b88f309</code></a> Fix small typos in <code>Client</code> docs (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1253">#1253</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/seanmonstar/reqwest/compare/v0.11.3...v0.11.4">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
566: Bump rand_chacha from 0.3.0 to 0.3.1 r=thomaseizinger a=dependabot[bot]
Bumps [rand_chacha](https://github.com/rust-random/rand) from 0.3.0 to 0.3.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/rust-random/rand/blob/master/CHANGELOG.md">rand_chacha's changelog</a>.</em></p>
<blockquote>
<h2>[0.3.19] - 2017-12-27</h2>
<h3>Changed</h3>
<ul>
<li>Require <code>log <= 0.3.8</code> for dev builds</li>
<li>Update <code>fuchsia-zircon</code> dependency to 0.3</li>
<li>Fix broken links in docs (to unblock compiler docs testing CI)</li>
</ul>
<h2>[0.3.18] - 2017-11-06</h2>
<h3>Changed</h3>
<ul>
<li><code>thread_rng</code> is seeded from the system time if <code>OsRng</code> fails</li>
<li><code>weak_rng</code> now uses <code>thread_rng</code> internally</li>
</ul>
<h2>[0.3.17] - 2017-10-07</h2>
<h3>Changed</h3>
<ul>
<li>Fuchsia: Magenta was renamed Zircon</li>
</ul>
<h2>[0.3.16] - 2017-07-27</h2>
<h3>Added</h3>
<ul>
<li>Implement Debug for mote non-public types</li>
<li>implement <code>Rand</code> for (i|u)i128</li>
<li>Support for Fuchsia</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Add inline attribute to SampleRange::construct_range.
This improves the benchmark for sample in 11% and for shuffle in 16%.</li>
<li>Use <code>RtlGenRandom</code> instead of <code>CryptGenRandom</code></li>
</ul>
<h2>[0.3.15] - 2016-11-26</h2>
<h3>Added</h3>
<ul>
<li>Add <code>Rng</code> trait method <code>choose_mut</code></li>
<li>Redox support</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Use <code>arc4rand</code> for <code>OsRng</code> on FreeBSD.</li>
<li>Use <code>arc4random(3)</code> for <code>OsRng</code> on OpenBSD.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix filling buffers 4 GiB or larger with <code>OsRng::fill_bytes</code> on Windows</li>
</ul>
<h2>[0.3.14] - 2016-02-13</h2>
<h3>Fixed</h3>
<ul>
<li>Inline definitions from winapi/advapi32, which decreases build times</li>
</ul>
<h2>[0.3.13] - 2016-01-09</h2>
<h3>Fixed</h3>
<ul>
<li>Compatible with Rust 1.7.0-nightly (needed some extra type annotations)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="98a0339f99"><code>98a0339</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1135">#1135</a> from dhardy/work</li>
<li><a href="a7f8fb72d7"><code>a7f8fb7</code></a> Prepare rand_chacha v0.3.1 release</li>
<li><a href="09d3df3119"><code>09d3df3</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1130">#1130</a> from dhardy/work</li>
<li><a href="d167dd25d2"><code>d167dd2</code></a> Deprecate ReadRng</li>
<li><a href="e3bc4a1357"><code>e3bc4a1</code></a> Do not impl serde for ReadRng or ReseedingRng</li>
<li><a href="66b163632e"><code>66b1636</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1132">#1132</a> from rust-random/readme-wasm-note</li>
<li><a href="d9c6a76048"><code>d9c6a76</code></a> README: add note regarding wasm32-unknown-unknown</li>
<li><a href="4726d328d6"><code>4726d32</code></a> Update minimum version of packed_simd_2</li>
<li><a href="f6bbfcfa89"><code>f6bbfcf</code></a> serde for BlockRng, ReseedingRng and ReadRng</li>
<li><a href="2732f2d6a8"><code>2732f2d</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1116">#1116</a> from vks/criterion</li>
<li>Additional commits viewable in <a href="https://github.com/rust-random/rand/compare/rand_chacha-0.3.0...rand_chacha-0.3.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
568: Bump bdk from 0.7.0 to 0.8.0 r=thomaseizinger a=dependabot[bot]
Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.7.0 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md">bdk's changelog</a>.</em></p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="33b45ebe82"><code>33b45eb</code></a> Bump version to 0.8.0</li>
<li><a href="2faed425ed"><code>2faed42</code></a> Update CHANGELOG</li>
<li><a href="2cc05c07a5"><code>2cc05c0</code></a> Bump version in <code>src/lib.rs</code></li>
<li><a href="9205295332"><code>9205295</code></a> Merge commit 'refs/pull/365/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="3b446c9e14"><code>3b446c9</code></a> Use no_run instead of ignore</li>
<li><a href="378167efca"><code>378167e</code></a> Remove explicit <code>feature(external_doc)</code></li>
<li><a href="224be27aa8"><code>224be27</code></a> Fix example/doctests format</li>
<li><a href="4a23070cc8"><code>4a23070</code></a> [ci] Check fmt for examples/doctests</li>
<li><a href="f8117c0f9f"><code>f8117c0</code></a> Bump version to 0.8.0-rc.1</li>
<li><a href="0ec064ef13"><code>0ec064e</code></a> Use AddressInfo in private methods</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.7.0...v0.8.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Instead of splitting up the transports into capabilities, we compose
them directly for each application. This allows us to remove the
websocket transport for the CLI which is really only needed for the
ASB to allow retrieval of quotes via the browser.
Libp2p's transports are meant to be composed. Hence, any form of
fallback should be implemented by emitting `MultiaddrNotSupported`
from the `listen` and `dial` functions.
This allows us to completely remove the tcp transport from the tor
transport.
515: Make it easier to create a bitcoin::Wallet for testing r=thomaseizinger a=thomaseizinger
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.
The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.
This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
531: Bump thiserror from 1.0.24 to 1.0.25 r=thomaseizinger a=dependabot[bot]
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.24 to 1.0.25.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dtolnay/thiserror/releases">thiserror's releases</a>.</em></p>
<blockquote>
<h2>1.0.25</h2>
<ul>
<li>Support <code>error(transparent)</code> on errors containing a non-<code>'static</code> inner error (<a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/113">#113</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="19cb5cee4b"><code>19cb5ce</code></a> Release 1.0.25</li>
<li><a href="e49c10f2ba"><code>e49c10f</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/134">#134</a> from dtolnay/nonstatic</li>
<li><a href="1ed8751081"><code>1ed8751</code></a> Support non-static AsDynError lifetimes</li>
<li><a href="51a1ff6593"><code>51a1ff6</code></a> Add regression test for issue 113</li>
<li><a href="ee2a47d3af"><code>ee2a47d</code></a> Adjust macro hygiene test formatting</li>
<li><a href="c610d97267"><code>c610d97</code></a> Update ui test suite to nightly-2021-05-14</li>
<li><a href="c10adbc25e"><code>c10adbc</code></a> Ignore manual_map clippy lint</li>
<li>See full diff in <a href="https://github.com/dtolnay/thiserror/compare/1.0.24...1.0.25">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
535: Bitcoin network check when building PSBT r=da-kami a=da-kami
This ensures that funds are not sent to an address on the wrong network.
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.
The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.
This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
Adds the ping behaviour to both ASB and CLI behaviour that periodically pings a connected party to ensure that the underlying network connection is still alive.
This fixes problems with long-running connections that become dead without a connection closure being reported back to the swarm.
This will allow us to compile on stable Rust.
The latest version of `secp256kfun` uses `curve25519-dalek-ng` instead
of the original curve25519-dalek crate. Instead of converting back and
forth, we simply switch to this crate as well. Judging from the README
it is just a fork because there was trouble between the maintainers of
the original crate.
It appears to be more stable.
Encountered issues with the previous setup, `monero-wallet-rpc` logs:
```
2021-05-24 04:23:54.852 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2021-05-24 04:23:54.857 E Exception at while refreshing, what=no connection to daemon
```
525: Bitcoin transaction published state r=da-kami a=da-kami
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality and prevents re-publishing the transaction.
Co-authored-by: Daniel Karzel <daniel@comit.network>
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
520: Cli json logging r=da-kami a=da-kami
Combining `--json` with the debug file logger was a pita, so I stopped and went for a simpler approach:
If `--json` is given we just log to terminal - **no** logfiles will be created in `{data-dir}/logs`.
The `--debug` flag applies to `--json` (i.e. if not given it will just print json on info level). We could change that to automatically fallback to debug - could add a `required_if` dependency via strucopt/clap but I did not want to invest more time into thinking about this.
Note on extending binary functionality:
As discussed with @thomaseizinger recently, we will have to think about multiple binaries soon, i.e. a binary that focuses to be used to building on top of it (that always logs json) and potientially keeping a simple CLI that is more user friendly. This also goes towards more clearly separating the application code from re-usable protocol / network code.
Co-authored-by: Daniel Karzel <daniel@comit.network>
519: Avoid application error upon `--help` r=da-kami a=da-kami
Our `preview` release is currently broken because of this issue.
The way we use clap's `get_matches_from_safe` caused parsing errors upon `--help` and `--version` to be bubbled up to the application - which causes the application to exit with an error when running `--help` and `--version`.
This is solved by using `get_matches_from` instead of `get_matches_from_safe` which handles these known clap commands internally and exits early.
Added smoke tests to CI so we catch such kind of problems in the future. Smoke testing by calling `--help` is cheap and should be OK in CI.
Co-authored-by: Daniel Karzel <daniel@comit.network>
Since we introduced our own parsing function for command line arguments, we have to make sure that clap's behaviour is handled correctly.
Clap's `get_matches_from_safe` returns an error of a certain kind, of which `ErrorKind::HelpDisplayed` and `ErrorKind::VersionDisplayed ` have to be handled to properly print the help/version and exit the program.
The clap error includes the message, so we print help/version in main now and ensure the program exits with `0` afterwards.
490: Mainnet switch r=da-kami a=da-kami
Fixes #446Fixes#360Fixes#506Fixes#478
To be precise: It is actually a testnet switch, because I think mainnet should be default.
I took several assumptions on the way (e.g. network support, ...).
At this stage any feedback welcome :)
TODO:
- [ ] successful mainnet swap with this code base before merging :)
Co-authored-by: Daniel Karzel <daniel@comit.network>
It is currently not expected that ASB and CLI are used for swaps > 10_000$ equivalent to XMR/BTC, thus the finality confirmations were reduced to an equivalent of 20 mins of work (2 blocks for Bitcoin, 10 for Monero).
Monero enforces 10 unlocking blocks until the balance is spendable, so the finality confirmations cannot be set lower than 10.
We subscribe to transactions upon broadcast, where we use output index `0` for the subscription.
In order to ensure that this subscription is guaranteed to be for the locking script (and not a change output) we now ensure that the locking script output is always at index `0` of the outputs of the transaction.
We chose this solution because otherwise we would have to add more information to broadcasting a transaction.
This solution is less intrusive, because the order of transaction outputs should not have any side effects and ensuring index `0` makes the whole behaviour more deterministic.
The Electrum block-header subscription did not provide us with block headers, because upon the connection being closed by a node the subscription would end.
Re-newing the the subscription upon re-connect is not easily achievable, that's why we opted for a polling mode for now, where we start a block header subscription on every update iteration, that is only used once (when the subscription is made).
There is no `--mainnet` flag.
Since we cannot just pass an empty string to `.arg()` we use the `.args()` method to pass nothing for mainnet and the respective flags for stagenet and testnet.
By default the finality confirmations of the network's `env::Config` will be applied and no finality confirmations will be persisted on disk in the config file.
It is however possible to set finality confirmations in the config file for bitcoin and monero for power users at their own risk.
If set the defaults will be overwritten with the parameter from the config file upon startup.
To run the ASB on testnet, one actively has to provide the `--testnet` flag.
Mainnet and testnet data and config are separated into sub-folders, i.e. `{data/config-dir}/asb/testnet` and `{data-dir}/asb/mainnet`.
The initial setup is also per network. If (default) config for the network cannot be found the initial setup is triggered.
Startup includes network check to ensure the bitcoin/monero network in config file is the same as the one in the `env::Config`.
Note: Wallet initialization is done with the network set in the `env::Config`, the network saved in the config file is just to indicate what network the config file is for.
This includes testing CLI commandline args
Clap's `default_value_with` actually did not work on `Subcommand`s because the parent's flags were not picked up.
This was fixed by changing parameters dependent on testnet/mainnet to options.
This problem should have been detected by tests, that's why the command line parameter tests were finally (re-)added.
Thanks to @rishflab for some pre-work for this.
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
In the past we had problems with flags/parameter changes several times, where on instance was changed, buy another one was missed. This should mitigate this problem.
This patch introduces structs for all duplicated parameters and uses flatten to only have one point for changes.
Additionally removes all mentions of `alice` from the commands / variables. This code is on an application level and should not be concerned with swap protocol roles.
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.
Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees.
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
