339: Bump dependency versions r=thomaseizinger a=thomaseizinger
Otherwise it will take a long time for dependabot to update all of
these.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
351: Show the actual BTC amount and fee to be swapped r=da-kami a=da-kami
We got user feedback, that it is confusing that the amount "found" in the wallet does not match the amount actually being swapped, thus with this PR we explicitly display the amount swapped and fees.
Co-authored-by: Daniel Karzel <daniel@comit.network>
319: Alice sweeps refunded funds into default wallet r=da-kami a=da-kami
Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
Co-authored-by: Daniel Karzel <daniel@comit.network>
If we enter a punish scenario we can be sure the punish timelock is expired.
Thus, we must be able to punish unless Bob published the refund transaction.
There is no benefit in racing punish against refund here, because we cannot recover from a punish tx failure anyway.
The logic was changed to:
Try to broadcast punish tx and await finality.
If either punish broadcasting of finality fails, try to fetch the refund transaction.
If it is available extract Bob's Monero key part and transition to refund.
If refund tx is not available fail without a status update.
Note that we do not distinguish different errors upon failure of punish, because
we cannot recover anyway. If we fail to retrieve Bob's refund tx, we just exit without
a status update so punish can be retried by resuming the swap.
Since Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
To achieve this, we decompose `watch_for_locked_xmr` into two parts:
1. A non-self-consuming function to construct a `WatchRequest`
2. A state transition that can now consume `self` again because
it is only called once within the whole select! expression.
Ideally, we would move more logic onto this state transition (like
comparing the actual amounts and fail the transition if it is not
valid). Doing so would have an unfortunate side-effect: We would
always wait for the full confirmations before checking whether or
not we actually receive enough XMR.
This allows us to have state transitions that consume self.
Instead of calling this function in all the branches, we can simply
make the whole match statement evaluate to the new state and perform
this functionality at the very end.
This allows us to move critical crypto logic onto `State3` which
holds all the necessary data which consequently allows us to get
rid of `lock_xmr` altogether by inlining it into the swap function.
The reduced indirection improves readability.
327: Bump actions/setup-python from v1 to v2.2.1 r=thomaseizinger a=dependabot[bot]
Bumps [actions/setup-python](https://github.com/actions/setup-python) from v1 to v2.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p>
<blockquote>
<h2>v2.2.1</h2>
<ul>
<li>Fix PyPy3 issues with Windows</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="3105fb18c0"><code>3105fb1</code></a> fix is_windows (<a href="https://github.com/actions/setup-python/issues/172">#172</a>)</li>
<li><a href="8c5ea631b2"><code>8c5ea63</code></a> Adding support for more PyPy versions and installing them on-flight (<a href="https://github.com/actions/setup-python/issues/168">#168</a>)</li>
<li><a href="2831efe49a"><code>2831efe</code></a> Improve find-python to add "Scripts" folder to PATH on Windows machines (<a href="https://github.com/actions/setup-python/issues/169">#169</a>)</li>
<li><a href="3b3f2de1b1"><code>3b3f2de</code></a> update pypy3 to point to 3.6 (<a href="https://github.com/actions/setup-python/issues/164">#164</a>)</li>
<li><a href="723e46dad7"><code>723e46d</code></a> CODEOWNERS needs the org name for teams</li>
<li><a href="195f5c388b"><code>195f5c3</code></a> Create CODEOWNERS</li>
<li><a href="41b7212b16"><code>41b7212</code></a> Update README.md (<a href="https://github.com/actions/setup-python/issues/145">#145</a>)</li>
<li><a href="878156f1de"><code>878156f</code></a> Inject LD_LIBRARY_PATH library path into Python manifest install and setup (#...</li>
<li><a href="c181ffa198"><code>c181ffa</code></a> Add Environment Files (<a href="https://github.com/actions/setup-python/issues/138">#138</a>)</li>
<li><a href="1ce870e10f"><code>1ce870e</code></a> Fix links in documentation (<a href="https://github.com/actions/setup-python/issues/135">#135</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/actions/setup-python/compare/v1...3105fb18c05ddd93efea5f9e0bef7a03a6e9e7df">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
330: Bump dialoguer from 0.7.1 to 0.8.0 r=thomaseizinger a=dependabot[bot]
Bumps [dialoguer](https://github.com/mitsuhiko/dialoguer) from 0.7.1 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/mitsuhiko/dialoguer/blob/master/CHANGELOG.md">dialoguer's changelog</a>.</em></p>
<blockquote>
<h2>0.8.0</h2>
<h3>Enhancements</h3>
<ul>
<li><code>Input::validate_with</code> can take a <code>FnMut</code> (allowing multiple references)</li>
</ul>
<h3>Breaking</h3>
<ul>
<li><code>Input::interact*</code> methods take <code>&mut self</code> instead of <code>&self</code></li>
</ul>
<h2>0.7.0</h2>
<h3>Enhancements</h3>
<ul>
<li>Added <code>wait_for_newline</code> to <code>Confirm</code></li>
<li>More secure password prompt</li>
<li>More documentation</li>
<li>Added <code>interact_text</code> method for input prompt</li>
<li>Added <code>inline_selections</code> to <code>ColorfulTheme</code></li>
</ul>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::CustomPromptCharacterTheme</code></li>
<li><code>Input</code> validators now take the input type <code>T</code> as arg</li>
<li><code>Confirm</code> has no <code>default</code> value by default now</li>
</ul>
<h2>0.6.2</h2>
<h3>Enhancements</h3>
<ul>
<li>Updating some docs</li>
</ul>
<h2>0.6.1</h2>
<h3>Bugfixes</h3>
<ul>
<li><code>theme::ColorfulTheme</code> default styles are for stderr</li>
</ul>
<h2>0.6.0</h2>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::SelectionStyle</code> enum</li>
<li>Allowed more customization for <code>theme::Theme</code> trait by changing methods</li>
<li>Allowed more customization for <code>theme::ColorfulTheme</code> by changing members</li>
<li>Renamed prompt <code>Confirmation</code> to <code>Confirm</code></li>
<li>Renamed prompt <code>PasswordInput</code> to <code>Password</code></li>
<li>Renamed prompt <code>OrderList</code> to <code>Sort</code></li>
<li>Renamed prompt <code>Checkboxes</code> to <code>MultiSelect</code></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="2c3fe6b646"><code>2c3fe6b</code></a> Release 0.8.0</li>
<li><a href="64f5f9c6f5"><code>64f5f9c</code></a> Allow confirm with no choice (<a href="https://github.com/mitsuhiko/dialoguer/issues/101">#101</a>)</li>
<li><a href="0250090f95"><code>0250090</code></a> Update some docs in confirm prompt</li>
<li><a href="a76fb72c54"><code>a76fb72</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/102">#102</a> from spenserblack/typo-fix</li>
<li><a href="3dd93bb75a"><code>3dd93bb</code></a> Fix typo: ereased -> erased</li>
<li><a href="7ea6275caa"><code>7ea6275</code></a> Update CI for i686 ubuntu</li>
<li><a href="af664807da"><code>af66480</code></a> Allow FnMut for validate (<a href="https://github.com/mitsuhiko/dialoguer/issues/96">#96</a>)</li>
<li><a href="2b5722d0f5"><code>2b5722d</code></a> Update README.md</li>
<li><a href="2df3a705eb"><code>2df3a70</code></a> Update ci.yml</li>
<li><a href="8cebf522b3"><code>8cebf52</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/94">#94</a> from mitsuhiko/remove-travis</li>
<li>Additional commits viewable in <a href="https://github.com/mitsuhiko/dialoguer/compare/0.7.1...0.8.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
331: Bump tokio from 1.0.2 to 1.3.0 r=thomaseizinger a=dependabot[bot]
Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.0.2 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/tokio-rs/tokio/releases">tokio's releases</a>.</em></p>
<blockquote>
<h2>Tokio v1.3.0</h2>
<h3>Added</h3>
<ul>
<li>coop: expose an <code>unconstrained()</code> opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li>net: add <code>into_std</code> for net types without it (<a href="https://github.com/tokio-rs/tokio/issues/3509">#3509</a>)</li>
<li>sync: add <code>same_channel</code> method to <code>mpsc::Sender</code> (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li>sync: add <code>{try_,}acquire_many_owned</code> to <code>Semaphore</code> (<a href="https://github.com/tokio-rs/tokio/issues/3535">#3535</a>)</li>
<li>sync: add back <code>RwLockWriteGuard::map</code> and <code>RwLockWriteGuard::try_map</code> (<a href="https://github.com/tokio-rs/tokio/issues/3348">#3348</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>sync: allow <code>oneshot::Receiver::close</code> after successful <code>try_recv</code> (<a href="https://github.com/tokio-rs/tokio/issues/3552">#3552</a>)</li>
<li>time: do not panic on <code>timeout(Duration::MAX)</code> (<a href="https://github.com/tokio-rs/tokio/issues/3551">#3551</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>doc: doc aliases for pre-1.0 function names (<a href="https://github.com/tokio-rs/tokio/issues/3523">#3523</a>)</li>
<li>io: fix typos (<a href="https://github.com/tokio-rs/tokio/issues/3541">#3541</a>)</li>
<li>io: note the EOF behaviour of <code>read_until</code> (<a href="https://github.com/tokio-rs/tokio/issues/3536">#3536</a>)</li>
<li>io: update <code>AsyncRead::poll_read</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3557">#3557</a>)</li>
<li>net: update <code>UdpSocket</code> splitting doc (<a href="https://github.com/tokio-rs/tokio/issues/3517">#3517</a>)</li>
<li>runtime: add link to <code>LocalSet</code> on <code>new_current_thread</code> (<a href="https://github.com/tokio-rs/tokio/issues/3508">#3508</a>)</li>
<li>runtime: update documentation of thread limits (<a href="https://github.com/tokio-rs/tokio/issues/3527">#3527</a>)</li>
<li>sync: do not recommend <code>join_all</code> for <code>Barrier</code> (<a href="https://github.com/tokio-rs/tokio/issues/3514">#3514</a>)</li>
<li>sync: documentation for <code>oneshot</code> (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li>sync: rename <code>notify</code> to <code>notify_one</code> (<a href="https://github.com/tokio-rs/tokio/issues/3526">#3526</a>)</li>
<li>time: fix typo in <code>Sleep</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3515">#3515</a>)</li>
<li>time: sync <code>interval.rs</code> and <code>time/mod.rs</code> docs (<a href="https://github.com/tokio-rs/tokio/issues/3533">#3533</a>)</li>
</ul>
<h2>Tokio v1.2.0</h2>
<h3>Added</h3>
<ul>
<li>signal: make <code>Signal::poll_recv</code> method public (<a href="https://github.com/tokio-rs/tokio/issues/3383">#3383</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>time: make <code>test-util</code> paused time fully deterministic (<a href="https://github.com/tokio-rs/tokio/issues/3492">#3492</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>sync: link to new broadcast and watch wrappers (<a href="https://github.com/tokio-rs/tokio/issues/3504">#3504</a>)</li>
</ul>
<h2>Tokio v1.1.1</h2>
<p>Forward ports 1.0.3 fix.</p>
<h3>Fixed</h3>
<ul>
<li>io: memory leak during shutdown (<a href="https://github.com/tokio-rs/tokio/issues/3477">#3477</a>).</li>
</ul>
<h2>Tokio v1.1.0</h2>
<h3>Added</h3>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="d0e4dd1d7b"><code>d0e4dd1</code></a> chore: prepare Tokio v1.3.0 (<a href="https://github.com/tokio-rs/tokio/issues/3597">#3597</a>)</li>
<li><a href="872bc09e83"><code>872bc09</code></a> examples: update chat example (<a href="https://github.com/tokio-rs/tokio/issues/3587">#3587</a>)</li>
<li><a href="db1d90453c"><code>db1d904</code></a> util: fuse PollSemaphore (<a href="https://github.com/tokio-rs/tokio/issues/3578">#3578</a>)</li>
<li><a href="05eeea570e"><code>05eeea5</code></a> coop: expose an unconstrained() opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li><a href="f70b9b84f7"><code>f70b9b8</code></a> sync: documenation for oneshot (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li><a href="704de8c01b"><code>704de8c</code></a> stream: remove duplicate <code>doc(test(..))</code> & <code>cfg_attr</code> declarations (<a href="https://github.com/tokio-rs/tokio/issues/3571">#3571</a>)</li>
<li><a href="47be928444"><code>47be928</code></a> sync: yield initial value in WatchStream (<a href="https://github.com/tokio-rs/tokio/issues/3576">#3576</a>)</li>
<li><a href="e06b257e09"><code>e06b257</code></a> sync: add same_channel method to mpsc Senders (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li><a href="0867a6fc03"><code>0867a6f</code></a> util: add pollable mpsc::Sender (<a href="https://github.com/tokio-rs/tokio/issues/3490">#3490</a>)</li>
<li><a href="0d838bf5ad"><code>0d838bf</code></a> io: fix link to std src in util (<a href="https://github.com/tokio-rs/tokio/issues/3568">#3568</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tokio/compare/tokio-1.0.2...tokio-1.3.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
332: Bump base64 from 0.12.3 to 0.13.0 r=thomaseizinger a=dependabot[bot]
Bumps [base64](https://github.com/marshallpierce/rust-base64) from 0.12.3 to 0.13.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/marshallpierce/rust-base64/blob/master/RELEASE-NOTES.md">base64's changelog</a>.</em></p>
<blockquote>
<h1>0.13.0</h1>
<ul>
<li>Config methods are const</li>
<li>Added <code>EncoderStringWriter</code> to allow encoding directly to a String</li>
<li><code>EncoderWriter</code> now owns its delegate writer rather than keeping a reference to it (though refs still work)
<ul>
<li>As a consequence, it is now possible to extract the delegate writer from an <code>EncoderWriter</code> via <code>finish()</code>, which returns <code>Result<W></code> instead of <code>Result<()></code>. If you were calling <code>finish()</code> explicitly, you will now need to use <code>let _ = foo.finish()</code> instead of just <code>foo.finish()</code> to avoid a warning about the unused value.</li>
</ul>
</li>
<li>When decoding input that has both an invalid length and an invalid symbol as the last byte, <code>InvalidByte</code> will be emitted instead of <code>InvalidLength</code> to make the problem more obvious.</li>
</ul>
<h1>0.12.2</h1>
<ul>
<li>Add <code>BinHex</code> alphabet</li>
</ul>
<h1>0.12.1</h1>
<ul>
<li>Add <code>Bcrypt</code> alphabet</li>
</ul>
<h1>0.12.0</h1>
<ul>
<li>A <code>Read</code> implementation (<code>DecoderReader</code>) to let users transparently decoded data from a b64 input source</li>
<li>IMAP's modified b64 alphabet</li>
<li>Relaxed type restrictions to just <code>AsRef<[ut8]></code> for main <code>encode*</code>/<code>decode*</code> functions</li>
<li>A minor performance improvement in encoding</li>
</ul>
<h1>0.11.0</h1>
<ul>
<li>Minimum rust version 1.34.0</li>
<li><code>no_std</code> is now supported via the two new features <code>alloc</code> and <code>std</code>.</li>
</ul>
<h1>0.10.1</h1>
<ul>
<li>Minimum rust version 1.27.2</li>
<li>Fix bug in streaming encoding (<a href="https://github.com/marshallpierce/rust-base64/pull/90">#90</a>): if the underlying writer didn't write all the bytes given to it, the remaining bytes would not be retried later. See the docs on <code>EncoderWriter::write</code>.</li>
<li>Make it configurable whether or not to return an error when decoding detects excess trailing bits.</li>
</ul>
<h1>0.10.0</h1>
<ul>
<li>Remove line wrapping. Line wrapping was never a great conceptual fit in this library, and other features (streaming encoding, etc) either couldn't support it or could support only special cases of it with a great increase in complexity. Line wrapping has been pulled out into a <a href="https://crates.io/crates/line-wrap">line-wrap</a> crate, so it's still available if you need it.
<ul>
<li><code>Base64Display</code> creation no longer uses a <code>Result</code> because it can't fail, which means its helper methods for common
configs that <code>unwrap()</code> for you are no longer needed</li>
</ul>
</li>
<li>Add a streaming encoder <code>Write</code> impl to transparently base64 as you write.</li>
<li>Remove the remaining <code>unsafe</code> code.</li>
<li>Remove whitespace stripping to simplify <code>no_std</code> support. No out of the box configs use it, and it's trivial to do yourself if needed: <code>filter(|b| !b" \n\t\r\x0b\x0c".contains(b)</code>.</li>
<li>Detect invalid trailing symbols when decoding and return an error rather than silently ignoring them.</li>
</ul>
<h1>0.9.3</h1>
<ul>
<li>Update safemem</li>
</ul>
<h1>0.9.2</h1>
<ul>
<li>Derive <code>Clone</code> for <code>DecodeError</code>.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="b4fc91325e"><code>b4fc913</code></a> v0.13.0</li>
<li><a href="bba4c5d11e"><code>bba4c5d</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/145">#145</a> from marshallpierce/mp/cleanup</li>
<li><a href="42967320b3"><code>4296732</code></a> Add docs and other cleanup</li>
<li><a href="6bb3556633"><code>6bb3556</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/144">#144</a> from untitaker/invalid-bytes-not-length</li>
<li><a href="5b40e0c04e"><code>5b40e0c</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/142">#142</a> from marshallpierce/mp/string-writer</li>
<li><a href="8b1ae22bab"><code>8b1ae22</code></a> Rename StrWrite to StrConsumer</li>
<li><a href="27ccb6591e"><code>27ccb65</code></a> fix tests</li>
<li><a href="d15cd384e1"><code>d15cd38</code></a> Give better error messages when decoding data with trailing newlines</li>
<li><a href="5a56885c65"><code>5a56885</code></a> Introduce StrWriter to allow ESW to wrap both a String and a &mut String</li>
<li><a href="2dc0296d2a"><code>2dc0296</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/143">#143</a> from marshallpierce/mp/invalid-length-doc</li>
<li>Additional commits viewable in <a href="https://github.com/marshallpierce/rust-base64/compare/v0.12.3...v0.13.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
321: Properly handle concurrent messages to and from peers r=thomaseizinger a=thomaseizinger
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
322: Refactor `ExecutionParams` and harmonize sync intervals of wallets r=thomaseizinger a=thomaseizinger
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
We define the sync interval as 1/10th of the blocktime. For the
special case of our tests, we however check at max once per second.
The tests have a super fast blocktime. As such we shouldn't hammer
the nodes with a request every 100ms.
Bob does not care whether tx lock is confirmed. That is alice's problem.
This wait was introduced to remedy a bug in status_of_script() which was
failing when called on a transaction with no confirmations.
320: Fix env filter for asb r=thomaseizinger a=thomaseizinger
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
317: Fix monero refresh interval r=thomaseizinger a=thomaseizinger
The comparison should be the MAXIMUM of the two values, not the
minimum, otherwise we always refresh at an interval of 1 second.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
A non-interactive terminal is likely something along the lines of
journalctl which captures a timestamp by itself. In theory, it could
also be just a logfile but we rather accept this limitation and keep
the configuration surface simple rather than exposing another config
switch.
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
We have a repeated pattern where we construct one of our
Tx{Cancel,Redeem,Punish,Refund,Lock} transactions and wait until
the status of this transaction changes. We can make this more
ergonomic by creating and implementing a `Watchable` trait that
gives access to the TxId and relevant script for this transaction.
This allows us to remove a parameter from the `watch_until_status`
function.
Additionally, there is a 2nd pattern: "Completing" one of these
transaction and waiting until they are confirmed with the configured
number of blocks for finality. We can make this more ergonomic by
returning a future from `broadcast` that callers can await in case
they want to wait for the broadcasted transaction to reach finality.
The execution params don't change throughout the lifetime of the
program. They can be set in the wallet at the very beginning.
This simplifies the interface of the wallet functions.
We achieve our optimizations in three ways:
1. Batching calls instead of making them individually.
To get access to the batch calls, we replace all our
calls to the HTTP interface with RPC calls.
2. Never directly make network calls based on function
calls on the wallet.
Instead, inquiring about the status of a script always
just returns information based on local data. With every
call, we check when we last refreshed the local data and
do so if the data is considered to be too old. This
interval is configurable.
3. Use electrum's notification feature to get updated
with the latest blockheight.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Rishab Sharma <rishflab@hotmail.com>
We reduce indirection by constructing TxPunish directly based off
`State3` and make the type itself more powerful by moving the logic
of completing it with a signature onto it.
Instead of spawning the swap inside the event loop we send the swap back
to the caller to be spawned. This means we no longer need the remote handle
that was only used in the tests.
This now properly logs the swap results in production.
It also gives us more control over Alice's swap in the tests.
This allows us to have access to RedeemTx from within the scope
of the state transition which we are going to need for more
efficient watching of what happens to this TX on the blockchain.
314: Remove CLI config file in favour of parameters r=thomaseizinger a=da-kami
Fixes#282
The CLI has sensible default values for all parameters,
thus a config file is not really an advantage but just
keeps getting in our way, so re remove it.
Trait impls on `Data` needed for structopt, see https://docs.rs/structopt/0.3.21/structopt/#default-values
Co-authored-by: Daniel Karzel <daniel@comit.network>
The CLI has sensible default values for all parameters,
thus a config file is not really an advantage but just
keeps getting in our way, so re remove it.
306: Fix logging and retrying of Monero transaction watching r=thomaseizinger a=thomaseizinger
Hopefully, this should also reduce the load because I am not asking the node every second.
Related: https://github.com/comit-network/xmr-btc-swap/issues/202
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Instead, we use a regular loop and extract everything into a function
that can be independently tested.
`backoff` would be useful to retry the actual call to the node.
This config setting makes backoff stop retrying if we didn't get an
error within this timeframe.
For us, this results in backoff not actually doing anything.
The connection to kraken is very long-running. It might be active
for hours without failing. However, the default value for
`max_elapsed_time` is set to 15 minutes. As such, once the connection
fails any time after that, backoff doesn't actually retry the operation
but just gives up.
Fixes#303.
In order to be able to re-connect on certain errors, we model
connection errors separately from parsing errors. We also change
the API of the whole module to no longer forward all errors to
the subscribers but instead, only update the subscribers with
either a latest rate or a permanent failure in case we exhausted
all our options to re-connect the websocket.
To model all of this properly, we introduce to sub-modules so that
each submodule can have their own `Error` type.
Resolves#297.
First, we tell the user that we are now waiting for Alice to lock
the monero. Additionally, we tell them once we received the
transfer proof which will lead directly into the
"waiting for confirmations" function.
The type hints are generated from the field names. This has the
unfortunate consequence of the config field becoming file_path which
does not really make sense people working on the codebase.
The bitcoin::Wallet::sync_wallet function doesn't do anything else
other than delegating. As such, we have just as much information
about what went wrong inside this function as we have outside.
By moving the .context call into the function, we can avoid repeating
us on every call-site.
288: Switch to public stagenet node that works r=rishflab a=rishflab
The xmr.to node has been unreliable lately. The exan.tech node seems to
working.
@da-kami is following up with making this configurable. Lets get this in so we can get a release on Friday.
Co-authored-by: rishflab <rishflab@hotmail.com>
Instead of leaking the tokio::sync:⌚:Receiver type in our
return value, we create a newtype that implements the desired
interface. This allows us to get rid of the `RateService` structs
and instead implement `LatestRate` directly on top of this struct.
Given that `LatestRate` is only used within the event_loop module,
we move the definition of this type into there.
271: Bob can verify that the XMR lock tx was published r=da-kami a=da-kami
The Monero `txhash` log was removed. I feel the user should have the possibility to verify that the transaction was actually published so I added the tx-hash to the confirmation output.
We could potentially print the tx-hash when receiving the transfer proof already, but that might not add much value compared to printing it with the confirmations.
Additionally we should allow the user to at least know when the XMR can be expected in the user's wallet, otherwise the swap ends like this:
```
2021-03-04 13:49:19 INFO Monero lock tx received 5 out of 5 confirmations
```
This is just not very informative - yes, the final transaction is an implementation detail, but I don't think we should hide the transactions from the user. By printing the tx-hash for spending from the lock-tx into the user wallet we ensure the user knows that the XMR can now be expected in the user wallet.
---
To add context, here the complete log (with debug enabled) **before** this change:
```
2021-03-04 13:30:46 DEBUG Database and seed will be stored in /Users/dakami/Library/Application Support/xmr-btc-swap
2021-03-04 13:30:46 DEBUG Starting monero-wallet-rpc on port 56145
2021-03-04 13:30:51 DEBUG Requesting quote
2021-03-04 13:30:51 INFO Received quote: 1 XMR = 0.00433500 BTC
2021-03-04 13:30:51 INFO Still got 0.01018746 BTC left in wallet, swapping ...
2021-03-04 13:30:51 INFO Spot price for 0.00500000 BTC is 1.153402537485 XMR
2021-03-04 13:30:52 DEBUG Starting execution setup with 12D3KooWCdMKjesXMJz1SiZ7HgotrxuqhQJbP5sgBm2BwP1cqThi
2021-03-04 13:30:55 INFO Published Bitcoin 3a6690a962191529892318819fb20e7f1ac4625400e64ee734056a9b2a17ad8f transaction as lock
2021-03-04 13:41:13 DEBUG Received Transfer Proof from 12D3KooWCdMKjesXMJz1SiZ7HgotrxuqhQJbP5sgBm2BwP1cqThi
2021-03-04 13:42:11 INFO Monero lock tx received 1 out of 5 confirmations
2021-03-04 13:45:33 INFO Monero lock tx received 2 out of 5 confirmations
2021-03-04 13:47:49 INFO Monero lock tx received 3 out of 5 confirmations
2021-03-04 13:48:56 INFO Monero lock tx received 4 out of 5 confirmations
2021-03-04 13:49:19 INFO Monero lock tx received 5 out of 5 confirmations
2021-03-04 13:49:19 DEBUG Encrypted signature sent
2021-03-04 13:49:19 DEBUG Alice acknowledged encrypted signature
2021-03-04 13:49:19 DEBUG watching for tx: e5569d3f0bcccac95252dffaebe74ead0360c09b76bc762de890aaa0e51afbcf
2021-03-04 13:49:20 DEBUG Received protocol error "missing transaction" from Electrum, retrying...
2021-03-04 13:49:22 DEBUG Received protocol error "missing transaction" from Electrum, retrying...
```
Co-authored-by: Daniel Karzel <daniel@comit.network>
Print tx-hashes for monero transactions to allow Bob to look the transaction up in block explorer.
The story of Bab:
Our famous actor Bob has a brother named Bab.
In school they were often mixed up, because their names were so similar.
Eventually Bab renamed himself into Barbara, but that was even more confusing for now he
carried a female name even though he was not female. Bob wanted to help his brother and told him he
could just go for Bub. But that did not solve anything. Fun fact: Bub is actually married to Alice.
Previously, the user neither knew the price nor the maximum quantity
they could trade. We now request a quote from the user and display
it to them.
Fixes#255.
This reduces the overall amount of LoC that imports take up in our
codebase by almost 100.
It also makes merge-conflicts less likely because there is less
grouping together of imports that may lead to layout changes which
in turn can cause merge conflicts.
265: Replace quote with spot-price protocol r=thomaseizinger a=thomaseizinger
This is essentially functionally equivalent but includes some
cleanups by removing a layer of abstraction: `spot_price::Behaviour`
is now just a type-alias for a request-response behaviour.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
261: Sweep xmr funds from generated temp wallet r=da-kami a=da-kami
Fixes#252
Please review by commit :)
Did a few cleanups before actually doing the feature.
Please note the comment that influenced this solution: https://github.com/comit-network/xmr-btc-swap/issues/252#issuecomment-789387074
Co-authored-by: Daniel Karzel <daniel@comit.network>
This is essentially functionally equivalent but includes some
cleanups by removing a layer of abstraction: `spot_price::Behaviour`
is now just a type-alias for a request-response behaviour.
Container initialization and wallet initialization have to ensure to use the same wallet name.
In order to avoid problems constants are introduced to ensure we use the same wallet name.
Prefixing docker-containers and -networks is a necessity to be able to spin up multiple containers and networks.
However, there is no reason to prefix the wallet names that live inside a container. One cannot add a wallet with
the same name twice, so the prefixing of wallets does not bring any advantage. When re-opening a wallet by name
the wallet name prefix is cumbersome and was thus removed.
The wallet is an instance of a wallet that has a name.
When we use `CreateWalletForOutputThenReloadWallet` we actually unload the wallet.
It would be cleaner to create a new instance that does that swap, but I did not go that far.
Instead of instantiating the `EventLoop` within the builder, we only
pass in the necessary arguments (which is the `EventLoopHandle`) to
the Builder upon `new`.
This is work towards #255 which will require us to perform network
communication (which implies having the `EventLoop`) before starting
a swap.
If our expression directly evaluates to a future, we don't need to
create an async block.
This requires us to have `EventLoopRun::run` consume the instance
instead of just taking a mutable reference (otherwise we run into
lifetime issues). However, that is better anyway because `run` is
an endless loop so you never get to use the handle afterwards
anyway.
Previously we were ignoring if the monero wallet rpc was not found and
unpacked from archive leading to a failure down the line when trying to
run a non-existent executable. Bail when the executable is no found in
the archive.
