Closing the connection upon completing the `swap_setup` protocol caused problems on the ASB side, because the CLI would close the connection before the last message was properly processed. This would result in swaps going into execution on the CLI side, but not on the ASB side.
The CLI ensures an open connection to the ASB over the complete course of a swap. So it does not make much sense to allow a protocol to close the connection (the CLI would immediately redial).
For the Alice we set the initial `KeepAlive` to `10` seconds because Bob is expected to request a spot price in reasonable time after opening a connection on the protocol. Since Tor connections can take some time we set 10 seconds fow now for resilience.
Given that we combined the `spot_price` and the `execution_setup` messaging into one protocol we should allow the protocol to take longer than 60 seconds to complete.
This is especially important for connections over Tor, where messaging can take significantly longer than over clearnet.
I ran some tests with Tor and did not run into issues with the 60 seconds, but we get very close to the timeout, so we better make it more resilient by adding more time.
When swapping on testnet we ran into a problem where the CLI started the swap after sending all messages successfully, but the ASB ran into a `connection closed` error at the end of the `swap_setup` and the swap state machine was never actually triggered.
Flushing and closing the stream on both sides should ensure that we don't run into this problem and both parties gracefully exit the protocol.
Some network and application specific code does not belong in the protocol module and was moved.
Eventloop, recovery and the outside behaviour were moved to the respective application module because they are application specific.
The `swap_setup` was moved into the network module because upon change both sides will have to be changed and should thus stay close together.
Having `spot_price` and `execution_setup` as separate protocols did not bring any advantages, but was problematic because we had to ensure that `execution_setup` would be triggered after `spot_price`. Because of this dependency it is better to combine the protocols into one.
Combining the protocols also allows a refactoring to get rid of the `libp2p-async-await` dependency.
Alice always listens for the `swap_setup` protocol. When Bob opens a substream on that protocol the spot price is communicated, and then all execution setup messages (swap-id and signature exchange).
Includes a new state that is used to await BTC lock tx finality. Upon starting the swap we initially only wait for the BTC lock tx to be seen in the mempool.
This is guarded by a short timeout (3 mins), because it is assumed that in the current setup (sport_price + execution_setup only triggered upon funds being available already) the lock transaction should be picked up almost instanly after the execution setup succeeded.
Similar to the CLI the ASB has to ensure that the execution_setup is executed within a certain time.
Without a timeout the price (returned by `spot_price` would be guaranteed with the CLI indefinitely.
It seems the current chosen channel timeouts are still not optimal.
I ran into issues with swapping over Tor and traced them down to the CLI timeout of the bmrng channel.
It appears that the ASB was not running as quick as the CLI, which caused a timeout on the CLI side (in addition to the delay when sending messages over Tor).
Only `execution_setup` caused the problem so far, but I would recommend changing all the channel timeouts to one minute to avoid this problem.
581: Remove dead code r=thomaseizinger a=da-kami
583: Bump reqwest from 0.11.3 to 0.11.4 r=thomaseizinger a=dependabot[bot]
Bumps [reqwest](https://github.com/seanmonstar/reqwest) from 0.11.3 to 0.11.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/releases">reqwest's releases</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing "invalid" certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/blob/master/CHANGELOG.md">reqwest's changelog</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing "invalid" certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="f5fe17876a"><code>f5fe178</code></a> v0.11.4</li>
<li><a href="8e5af459e5"><code>8e5af45</code></a> Allow overriding of DNS resolution to specified IP addresses(<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/561">#561</a>) (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1277">#1277</a>)</li>
<li><a href="c4388fcff9"><code>c4388fc</code></a> WASM: Add <code>try_clone</code> implementations to <code>Request</code> and <code>RequestBuilder</code> (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1286">#1286</a>)</li>
<li><a href="b48cb4a5aa"><code>b48cb4a</code></a> Add native-tls-alpn feature (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1283">#1283</a>)</li>
<li><a href="bbeb1ede4e"><code>bbeb1ed</code></a> Bump ssri from 6.0.1 to 6.0.2 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1262">#1262</a>)</li>
<li><a href="841d47c6a2"><code>841d47c</code></a> Bump url-parse from 1.4.7 to 1.5.1 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1267">#1267</a>)</li>
<li><a href="33bc7939b4"><code>33bc793</code></a> Bump lodash from 4.17.19 to 4.17.21 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1269">#1269</a>)</li>
<li><a href="b0af278f78"><code>b0af278</code></a> Implement "default" functions of the trait to fix "insecure" mode (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1259">#1259</a>)</li>
<li><a href="8d3e27966c"><code>8d3e279</code></a> use ZlibDecoder for deflate responses (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1257">#1257</a>)</li>
<li><a href="b88f309339"><code>b88f309</code></a> Fix small typos in <code>Client</code> docs (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1253">#1253</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/seanmonstar/reqwest/compare/v0.11.3...v0.11.4">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
566: Bump rand_chacha from 0.3.0 to 0.3.1 r=thomaseizinger a=dependabot[bot]
Bumps [rand_chacha](https://github.com/rust-random/rand) from 0.3.0 to 0.3.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/rust-random/rand/blob/master/CHANGELOG.md">rand_chacha's changelog</a>.</em></p>
<blockquote>
<h2>[0.3.19] - 2017-12-27</h2>
<h3>Changed</h3>
<ul>
<li>Require <code>log <= 0.3.8</code> for dev builds</li>
<li>Update <code>fuchsia-zircon</code> dependency to 0.3</li>
<li>Fix broken links in docs (to unblock compiler docs testing CI)</li>
</ul>
<h2>[0.3.18] - 2017-11-06</h2>
<h3>Changed</h3>
<ul>
<li><code>thread_rng</code> is seeded from the system time if <code>OsRng</code> fails</li>
<li><code>weak_rng</code> now uses <code>thread_rng</code> internally</li>
</ul>
<h2>[0.3.17] - 2017-10-07</h2>
<h3>Changed</h3>
<ul>
<li>Fuchsia: Magenta was renamed Zircon</li>
</ul>
<h2>[0.3.16] - 2017-07-27</h2>
<h3>Added</h3>
<ul>
<li>Implement Debug for mote non-public types</li>
<li>implement <code>Rand</code> for (i|u)i128</li>
<li>Support for Fuchsia</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Add inline attribute to SampleRange::construct_range.
This improves the benchmark for sample in 11% and for shuffle in 16%.</li>
<li>Use <code>RtlGenRandom</code> instead of <code>CryptGenRandom</code></li>
</ul>
<h2>[0.3.15] - 2016-11-26</h2>
<h3>Added</h3>
<ul>
<li>Add <code>Rng</code> trait method <code>choose_mut</code></li>
<li>Redox support</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Use <code>arc4rand</code> for <code>OsRng</code> on FreeBSD.</li>
<li>Use <code>arc4random(3)</code> for <code>OsRng</code> on OpenBSD.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix filling buffers 4 GiB or larger with <code>OsRng::fill_bytes</code> on Windows</li>
</ul>
<h2>[0.3.14] - 2016-02-13</h2>
<h3>Fixed</h3>
<ul>
<li>Inline definitions from winapi/advapi32, which decreases build times</li>
</ul>
<h2>[0.3.13] - 2016-01-09</h2>
<h3>Fixed</h3>
<ul>
<li>Compatible with Rust 1.7.0-nightly (needed some extra type annotations)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="98a0339f99"><code>98a0339</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1135">#1135</a> from dhardy/work</li>
<li><a href="a7f8fb72d7"><code>a7f8fb7</code></a> Prepare rand_chacha v0.3.1 release</li>
<li><a href="09d3df3119"><code>09d3df3</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1130">#1130</a> from dhardy/work</li>
<li><a href="d167dd25d2"><code>d167dd2</code></a> Deprecate ReadRng</li>
<li><a href="e3bc4a1357"><code>e3bc4a1</code></a> Do not impl serde for ReadRng or ReseedingRng</li>
<li><a href="66b163632e"><code>66b1636</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1132">#1132</a> from rust-random/readme-wasm-note</li>
<li><a href="d9c6a76048"><code>d9c6a76</code></a> README: add note regarding wasm32-unknown-unknown</li>
<li><a href="4726d328d6"><code>4726d32</code></a> Update minimum version of packed_simd_2</li>
<li><a href="f6bbfcfa89"><code>f6bbfcf</code></a> serde for BlockRng, ReseedingRng and ReadRng</li>
<li><a href="2732f2d6a8"><code>2732f2d</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1116">#1116</a> from vks/criterion</li>
<li>Additional commits viewable in <a href="https://github.com/rust-random/rand/compare/rand_chacha-0.3.0...rand_chacha-0.3.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
568: Bump bdk from 0.7.0 to 0.8.0 r=thomaseizinger a=dependabot[bot]
Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.7.0 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md">bdk's changelog</a>.</em></p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="33b45ebe82"><code>33b45eb</code></a> Bump version to 0.8.0</li>
<li><a href="2faed425ed"><code>2faed42</code></a> Update CHANGELOG</li>
<li><a href="2cc05c07a5"><code>2cc05c0</code></a> Bump version in <code>src/lib.rs</code></li>
<li><a href="9205295332"><code>9205295</code></a> Merge commit 'refs/pull/365/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="3b446c9e14"><code>3b446c9</code></a> Use no_run instead of ignore</li>
<li><a href="378167efca"><code>378167e</code></a> Remove explicit <code>feature(external_doc)</code></li>
<li><a href="224be27aa8"><code>224be27</code></a> Fix example/doctests format</li>
<li><a href="4a23070cc8"><code>4a23070</code></a> [ci] Check fmt for examples/doctests</li>
<li><a href="f8117c0f9f"><code>f8117c0</code></a> Bump version to 0.8.0-rc.1</li>
<li><a href="0ec064ef13"><code>0ec064e</code></a> Use AddressInfo in private methods</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.7.0...v0.8.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Instead of splitting up the transports into capabilities, we compose
them directly for each application. This allows us to remove the
websocket transport for the CLI which is really only needed for the
ASB to allow retrieval of quotes via the browser.
Libp2p's transports are meant to be composed. Hence, any form of
fallback should be implemented by emitting `MultiaddrNotSupported`
from the `listen` and `dial` functions.
This allows us to completely remove the tcp transport from the tor
transport.
515: Make it easier to create a bitcoin::Wallet for testing r=thomaseizinger a=thomaseizinger
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.
The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.
This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
531: Bump thiserror from 1.0.24 to 1.0.25 r=thomaseizinger a=dependabot[bot]
Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.24 to 1.0.25.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dtolnay/thiserror/releases">thiserror's releases</a>.</em></p>
<blockquote>
<h2>1.0.25</h2>
<ul>
<li>Support <code>error(transparent)</code> on errors containing a non-<code>'static</code> inner error (<a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/113">#113</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="19cb5cee4b"><code>19cb5ce</code></a> Release 1.0.25</li>
<li><a href="e49c10f2ba"><code>e49c10f</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/134">#134</a> from dtolnay/nonstatic</li>
<li><a href="1ed8751081"><code>1ed8751</code></a> Support non-static AsDynError lifetimes</li>
<li><a href="51a1ff6593"><code>51a1ff6</code></a> Add regression test for issue 113</li>
<li><a href="ee2a47d3af"><code>ee2a47d</code></a> Adjust macro hygiene test formatting</li>
<li><a href="c610d97267"><code>c610d97</code></a> Update ui test suite to nightly-2021-05-14</li>
<li><a href="c10adbc25e"><code>c10adbc</code></a> Ignore manual_map clippy lint</li>
<li>See full diff in <a href="https://github.com/dtolnay/thiserror/compare/1.0.24...1.0.25">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
535: Bitcoin network check when building PSBT r=da-kami a=da-kami
This ensures that funds are not sent to an address on the wrong network.
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.
The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.
This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
Adds the ping behaviour to both ASB and CLI behaviour that periodically pings a connected party to ensure that the underlying network connection is still alive.
This fixes problems with long-running connections that become dead without a connection closure being reported back to the swarm.
This will allow us to compile on stable Rust.
The latest version of `secp256kfun` uses `curve25519-dalek-ng` instead
of the original curve25519-dalek crate. Instead of converting back and
forth, we simply switch to this crate as well. Judging from the README
it is just a fork because there was trouble between the maintainers of
the original crate.
It appears to be more stable.
Encountered issues with the previous setup, `monero-wallet-rpc` logs:
```
2021-05-24 04:23:54.852 E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2021-05-24 04:23:54.857 E Exception at while refreshing, what=no connection to daemon
```
525: Bitcoin transaction published state r=da-kami a=da-kami
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality and prevents re-publishing the transaction.
Co-authored-by: Daniel Karzel <daniel@comit.network>
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
520: Cli json logging r=da-kami a=da-kami
Combining `--json` with the debug file logger was a pita, so I stopped and went for a simpler approach:
If `--json` is given we just log to terminal - **no** logfiles will be created in `{data-dir}/logs`.
The `--debug` flag applies to `--json` (i.e. if not given it will just print json on info level). We could change that to automatically fallback to debug - could add a `required_if` dependency via strucopt/clap but I did not want to invest more time into thinking about this.
Note on extending binary functionality:
As discussed with @thomaseizinger recently, we will have to think about multiple binaries soon, i.e. a binary that focuses to be used to building on top of it (that always logs json) and potientially keeping a simple CLI that is more user friendly. This also goes towards more clearly separating the application code from re-usable protocol / network code.
Co-authored-by: Daniel Karzel <daniel@comit.network>
519: Avoid application error upon `--help` r=da-kami a=da-kami
Our `preview` release is currently broken because of this issue.
The way we use clap's `get_matches_from_safe` caused parsing errors upon `--help` and `--version` to be bubbled up to the application - which causes the application to exit with an error when running `--help` and `--version`.
This is solved by using `get_matches_from` instead of `get_matches_from_safe` which handles these known clap commands internally and exits early.
Added smoke tests to CI so we catch such kind of problems in the future. Smoke testing by calling `--help` is cheap and should be OK in CI.
Co-authored-by: Daniel Karzel <daniel@comit.network>
Since we introduced our own parsing function for command line arguments, we have to make sure that clap's behaviour is handled correctly.
Clap's `get_matches_from_safe` returns an error of a certain kind, of which `ErrorKind::HelpDisplayed` and `ErrorKind::VersionDisplayed ` have to be handled to properly print the help/version and exit the program.
The clap error includes the message, so we print help/version in main now and ensure the program exits with `0` afterwards.
490: Mainnet switch r=da-kami a=da-kami
Fixes #446Fixes#360Fixes#506Fixes#478
To be precise: It is actually a testnet switch, because I think mainnet should be default.
I took several assumptions on the way (e.g. network support, ...).
At this stage any feedback welcome :)
TODO:
- [ ] successful mainnet swap with this code base before merging :)
Co-authored-by: Daniel Karzel <daniel@comit.network>
It is currently not expected that ASB and CLI are used for swaps > 10_000$ equivalent to XMR/BTC, thus the finality confirmations were reduced to an equivalent of 20 mins of work (2 blocks for Bitcoin, 10 for Monero).
Monero enforces 10 unlocking blocks until the balance is spendable, so the finality confirmations cannot be set lower than 10.
We subscribe to transactions upon broadcast, where we use output index `0` for the subscription.
In order to ensure that this subscription is guaranteed to be for the locking script (and not a change output) we now ensure that the locking script output is always at index `0` of the outputs of the transaction.
We chose this solution because otherwise we would have to add more information to broadcasting a transaction.
This solution is less intrusive, because the order of transaction outputs should not have any side effects and ensuring index `0` makes the whole behaviour more deterministic.
The Electrum block-header subscription did not provide us with block headers, because upon the connection being closed by a node the subscription would end.
Re-newing the the subscription upon re-connect is not easily achievable, that's why we opted for a polling mode for now, where we start a block header subscription on every update iteration, that is only used once (when the subscription is made).
There is no `--mainnet` flag.
Since we cannot just pass an empty string to `.arg()` we use the `.args()` method to pass nothing for mainnet and the respective flags for stagenet and testnet.
By default the finality confirmations of the network's `env::Config` will be applied and no finality confirmations will be persisted on disk in the config file.
It is however possible to set finality confirmations in the config file for bitcoin and monero for power users at their own risk.
If set the defaults will be overwritten with the parameter from the config file upon startup.
To run the ASB on testnet, one actively has to provide the `--testnet` flag.
Mainnet and testnet data and config are separated into sub-folders, i.e. `{data/config-dir}/asb/testnet` and `{data-dir}/asb/mainnet`.
The initial setup is also per network. If (default) config for the network cannot be found the initial setup is triggered.
Startup includes network check to ensure the bitcoin/monero network in config file is the same as the one in the `env::Config`.
Note: Wallet initialization is done with the network set in the `env::Config`, the network saved in the config file is just to indicate what network the config file is for.
This includes testing CLI commandline args
Clap's `default_value_with` actually did not work on `Subcommand`s because the parent's flags were not picked up.
This was fixed by changing parameters dependent on testnet/mainnet to options.
This problem should have been detected by tests, that's why the command line parameter tests were finally (re-)added.
Thanks to @rishflab for some pre-work for this.
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
In the past we had problems with flags/parameter changes several times, where on instance was changed, buy another one was missed. This should mitigate this problem.
This patch introduces structs for all duplicated parameters and uses flatten to only have one point for changes.
Additionally removes all mentions of `alice` from the commands / variables. This code is on an application level and should not be concerned with swap protocol roles.
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.
Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees.
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.
The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.
```
...
[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
Weights fluctuate because of the length of the signatures. Valid ecdsa signatures can have 68, 69, 70, 71, or 72 bytes. Since most of our transactions have 2 signatures the weight can be up to 8 bytes less than the static weight (4 bytes per signature).
Adds `cancel`, `refund`, `punish`, `redeem` and `safely-abort` commands to the ASB that can be used to trigger the specific scenario for the swap by ID.
`asb --help` :
(...)
SUBCOMMANDS:
balance Prints the Bitcoin and Monero balance. Requires the monero-wallet-rpc to be running.
help Prints this message or the help of the given subcommand(s)
history Prints swap-id and the state of each swap ever made.
start Main command to run the ASB.
withdraw-btc Allows withdrawing BTC from the internal Bitcoin wallet.
In the production code it is a weird indirection that we load the state and then pass in the state and the database.
In the tests we have one additional load by doing it inside the command, but loading from the db is not expensive.
Each test spawns swarm for Alice and Bob that only contains the spot_price behaviours and uses a memory transport.
Tests cover happy path (i.e. expected price is returned) and error scenarios.
Implementation of `TestRate` on `LatestRate` allows testing rate fetch error and quote calculation error behaviour.
Thanks to @thomaseizinger for ramping up the test framework for comit-rs in the past!
Instead of handling all errors on the inside spot_price errors are bubbled up (as `SwapRequestDeclined`).
This allows us to test both Alice's and Bob's behaviour for all scenarios.
What goes over the wire should not be coupled to the errors being printed.
For the CLI and ASB we introduce a separate error enum that is used for logging.
When sending over the wire the errors are mapped to and from the `network::spot_price::Error`.
As part of Bob-specific spot_price code was moved from the network into bob.
Clearly separation of the network API from bob/alice.
Move Alice's spot price logic into a dedicated network behaviour that handles all the logic.
The new behaviour encapsulates the complete state necessary for spot price request decision making.
The network behaviour cannot handle asynchronous calls, thus the balance is managed inside the spot price and has to updated regularly from the outside to ensure the spot price balance check has up to date data.
At the moment the balance is updated upon an incoming quote requests.
Code that is relevant for both ASB and CLI remains in the `network::spot_price` module (e.g. `network::spot_price::Error`).
When a CLI requests a spot price have some errors that are expected, where we can provide a proper error message for the CLI:
- Balance of ASB too low
- Buy amount sent by CLI exceeds maximum buy amount accepted by ASB
- ASB is running in maintenance mode and does not accept incoming swap requests
All of these errors returns a proper error to the CLI and prints a warning in the ASB logs.
Any other unexpected error will result in closing the channel with the CLI and printing an error in the ASB logs.
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
Fees are hard to compute and it is too easy to get wrong and lose a lot of money. Hence, a hardcoded maximum of 100,000 satoshi for a single transaction is in place.
Electrum has an estimate-fee feature which takes as input the block you want a tx to be included.
The result is a recommendation of BTC/vbyte.
Using this recommendation and the knowledge about the size of our transactions we compute an appropriate fee.
The size of the transactions were taken from real transactions as published on bitcoin testnet.
Note: in reality these sizes might fluctuate a bit but not for much.
Alice chooses the fee for TxPunish because she is the one that cares.
Bob chooses the fee for TxRefund because he is the one that cares.
Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
Alice chooses the fee for TxRedeem because she is the one that cares. Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
434: Introduce monero-wallet crate r=thomaseizinger a=thomaseizinger
This PR:
1. ~Introduce a crate for the epee binary serialization as a serde format~: Released here: https://github.com/comit-network/monero-epee-bin-serde
2. Extends the MoneroRPC client with two binary calls
3. Introduces a `monero-wallet` crate that for now just provides functionality for choosing random key offsets. Together with the the ability to produce bulletproofs and ring signatures, this should be enough for signing Monero transactions locally.
(1) and (2) are a prerequisite for (3).
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
460: Different default directories for CLI and ASB r=da-kami a=da-kami
Fixes#437
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: `xmr-btc-swap-asb`
- CLI: `xmr-btc-swap-cli`
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Co-authored-by: Daniel Karzel <daniel@comit.network>
459: Use dprint for formatting Cargo.toml files r=thomaseizinger a=thomaseizinger
Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.
Using dprint for toml files fixes this.
Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap/asb
- CLI: xmr-btc-swap/cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap-asb
- CLI: xmr-btc-swap-cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Bob validates that incoming transfer proof messages are coming from the peer-id of Alice.
Currently Bob will ignore any transfer proof message that is not coming from the counterparty peer-id associated to the current swap in execution.
Once we add support for trying to save received transfer proofs for swaps that are currently not in execution we can also adapy allowing this for different counterparty peer-ids. This requires access to the database in Bob's event loop.
Alice validates that incoming encsig messages are coming from the peer-id that is associated with the swap.
Encsig message from a peer-id different to the one associated with the swap are ignored.
Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.
Using dprint for toml files fixes this.
Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.
This PR does a few things.
* It adds a TorTransport which either dials through Tor's socks5 proxy or via clearnet.
* It enables ASB to register hidden services for each network it is listening on. We assume that we only care about different ports and re-use the same onion-address for all of them. The ASB requires to have access to Tor's control port.
* It adds support to dial through a local Tor socks5 proxy. We assume that Tor is always available on localhost. Swap cli only requires Tor to be running so that it can send messages via Tor's socks5 proxy.
* It adds a new e2e test which swaps through Tor. For this we assume that Tor is currently running on localhost. All other tests are running via clear net.
442: Minor cleanups towards implementing a Monero wallet for local signing r=thomaseizinger a=thomaseizinger
Extracted out of #434.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
1. Split up image::Monero into Monerod and MoneroWalletRpc
2. Don't use `bash` to run the internal command. Instead we disable
the entrypoint script as per https://github.com/XMRto/monero#raw-commands
3. Remove the start up delay by listening for the correct log message.
To make this more resilient, we make the log level NOT configurable and
instead always log verbosely.
