Commit Graph

1240 Commits

Author SHA1 Message Date
rishflab
2d64a8d356
Revert "Release version 0.8.3" 2021-09-03 10:47:28 +10:00
COMIT Botty McBotface
2a4ffaeacb Prepare release 0.8.3 2021-09-02 05:46:50 +00:00
rishflab
ce58b8b333 Handle errors when waiting for subscriptions
We were not thorough enough in PR #705 and there were some remaining
unhandled errors.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-09-02 14:23:41 +10:00
COMIT Botty McBotface
d482db4e67 Prepare release 0.8.2 2021-09-01 05:29:31 +00:00
devbordecraft
7a12a847a0 Fetch multiple UTXOs when we do max_giveable 2021-09-01 13:25:29 +10:00
devbordecraft
f2df838a3c Allow withdrawing and viewing of the bitcoin balance on swap-cli 2021-09-01 13:25:27 +10:00
bors[bot]
51d8623ed7
Merge #704
704: Allow withdrawing and viewing of the bitcoin balance on swap-cli r=rishflab a=devbordecraft

Same mechanics of the ASB but on swap-cli as discussed in #694

Co-authored-by: devbordecraft <devbordecraft>
2021-09-01 01:47:11 +00:00
devbordecraft
e8a6af1517 Allow withdrawing and viewing of the bitcoin balance on swap-cli
Fix formatting issue

Fix after review
2021-08-31 20:42:28 +02:00
rishflab
af50c655ae Remove timeout on send encrypted signature
Bob was timing out if the encrypted signature could not be sent in 60
seconds. This behaviour is unnecessary because we are racing against
the cancel timelock anyway. By timing out before this, we remove the
opportunity for bob and alice to re-establish a connection.
2021-08-31 18:26:03 +10:00
rishflab
8598bcade1 Configure electrum client to retry 5 times 2021-08-31 18:26:03 +10:00
Daniel Karzel
18faa786d6 Fail if something goes wrong when checking tx lock status
Probably a failure when interacting with the electrum node to get script
 status updates
2021-08-31 18:26:00 +10:00
Thomas Eizinger
25b123d6ed
Load wallet in monero-wallet-rpc on demand if necessary
Previously, we relied on the wallet in the `monero-wallet-rpc` daemon
to be loaded as we do on startup. As a consequence of this expectation,
restarting `monero-wallet-rpc` to fix bugs like #652 resulted in the
ASB no longer operating correctly.

To fix this, we now load the wallet on-demand in case the daemon responds
with the error code -13.

Ideally, we would implement this behaviour generically using the proxy
pattern on the `MoneroWalletRpc` trait. Unfortunately, when attempting
to do so we uncover a limitation in the design of `jsonrpc_client`.
This limitation is tracked in https://github.com/thomaseizinger/rust-jsonrpc-client/issues/47.
Once fixed, we can implement this logic in a more robust way that is not
tied to the `check_tx_key` RPC call but applies to any RPC call automatically.
2021-08-27 09:39:29 +10:00
Seth Simmons
e3b231f045
Move "Lost connection" log line from WARN to Debug
Per #660, moving the log line on a peer closing connection outside of a swap to DEBUG instead of WARN, as there is no action that can be taken by the ASB owner.
2021-08-24 13:55:56 +00:00
bors[bot]
04bbcb1fc9
Merge #631 #641
631: Bump tokio-tungstenite from 0.14.0 to 0.15.0 r=thomaseizinger a=dependabot[bot]

Bumps [tokio-tungstenite](https://github.com/snapview/tokio-tungstenite) from 0.14.0 to 0.15.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/snapview/tokio-tungstenite/blob/master/CHANGELOG.md">tokio-tungstenite's changelog</a>.</em></p>
<blockquote>
<h1>0.15.0</h1>
<ul>
<li>Update the <code>tungstenite-rs</code> version to <code>0.14.0</code>,
<a href="https://github.com/snapview/tungstenite-rs/blob/master/CHANGELOG.md#0140">check <code>tungstenite-rs</code> release for more details</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="614a4b12eb"><code>614a4b1</code></a> Update the changelog</li>
<li><a href="6e1005f968"><code>6e1005f</code></a> Bump version</li>
<li><a href="44190cfef2"><code>44190cf</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/174">#174</a> from SyedAhkam/master</li>
<li><a href="bed60c753d"><code>bed60c7</code></a> Derive <code>Debug</code> trait for <code>MaybeTlsStream</code></li>
<li><a href="6ce3591789"><code>6ce3591</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/164">#164</a> from torlenor/document_tls_features</li>
<li><a href="4686ae0041"><code>4686ae0</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/165">#165</a> from snapview/fix-autobahn</li>
<li><a href="e861b1be06"><code>e861b1b</code></a> ci: do not use Travis, superseded by GH Actions</li>
<li><a href="12e3dca65a"><code>12e3dca</code></a> tests: fix confusing wrong paths in the scripts</li>
<li><a href="639b106739"><code>639b106</code></a> tests: use autobahn test suite as docker image</li>
<li><a href="c9b886ea72"><code>c9b886e</code></a> Add documentation about TLS features to README</li>
<li>Additional commits viewable in <a href="https://github.com/snapview/tokio-tungstenite/compare/v0.14.0...v0.15.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=tokio-tungstenite&package-manager=cargo&previous-version=0.14.0&new-version=0.15.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

641: Bump thomaseizinger/create-pull-request from 1.1.0 to 1.2.1 r=thomaseizinger a=dependabot[bot]

Bumps [thomaseizinger/create-pull-request](https://github.com/thomaseizinger/create-pull-request) from 1.1.0 to 1.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/releases">thomaseizinger/create-pull-request's releases</a>.</em></p>
<blockquote>
<h2>1.2.1</h2>
<p>No release notes provided.</p>
<h2>1.2.0</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/blob/master/CHANGELOG.md">thomaseizinger/create-pull-request's changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<p>All notable changes to this project will be documented in this file.</p>
<p>The format is based on <a href="https://keepachangelog.com/en/1.0.0/">Keep a Changelog</a>,
and this project adheres to <a href="https://semver.org/spec/v2.0.0.html">Semantic Versioning</a>.</p>
<h2>[Unreleased]</h2>
<h2>[1.2.0] - 2021-07-26</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="603900158e"><code>6039001</code></a> Use github.actor instead of hardcoded name</li>
<li><a href="f3b6912a65"><code>f3b6912</code></a> Added labels to action.yml (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/75">#75</a>)</li>
<li><a href="8aa44c8cb5"><code>8aa44c8</code></a> Update CHANGELOG.md</li>
<li><a href="0afa85c37f"><code>0afa85c</code></a> Added support for labels and existing PR check (v2 from master) (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/61">#61</a>)</li>
<li><a href="1737745289"><code>1737745</code></a> Add missing links to changelog</li>
<li><a href="2d426a48b7"><code>2d426a4</code></a> Create CONTRIBUTING.md</li>
<li><a href="296164f67d"><code>296164f</code></a> Misc (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/52">#52</a>)</li>
<li>See full diff in <a href="https://github.com/thomaseizinger/create-pull-request/compare/1.1.0...1.2.1">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=thomaseizinger/create-pull-request&package-manager=github_actions&previous-version=1.1.0&new-version=1.2.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-08-20 07:56:38 +00:00
dependabot[bot]
4a2bfbf9cf
Bump comfy-table from 4.0.1 to 4.1.1
Bumps [comfy-table](https://github.com/nukesor/comfy-table) from 4.0.1 to 4.1.1.
- [Release notes](https://github.com/nukesor/comfy-table/releases)
- [Changelog](https://github.com/Nukesor/comfy-table/blob/master/CHANGELOG.md)
- [Commits](https://github.com/nukesor/comfy-table/compare/v4.0.1...v4.1.1)

---
updated-dependencies:
- dependency-name: comfy-table
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
2021-08-20 01:32:09 +00:00
Thomas Eizinger
6c446825b7
Instruct Ping to keep the connection alive 2021-08-18 12:45:17 +10:00
Thomas Eizinger
1af0623c85
Remove empty modules 2021-08-18 12:35:47 +10:00
COMIT Botty McBotface
7126d77dc1 Prepare release 0.8.1 2021-08-16 01:37:09 +00:00
Thomas Eizinger
0296509110
Upgrade to bdk 0.10
This fixes #546. I don't know why, but I can't reproduce the problem
with the updated dependency.
2021-08-12 18:47:05 +10:00
Thomas Eizinger
475057abda
Add proptest for max_giveable and signing PSBT 2021-08-12 18:42:00 +10:00
Thomas Eizinger
e4b5e28a93
Introduce WalletBuilder for creating test instances of wallet 2021-08-12 18:39:31 +10:00
Thomas Eizinger
148fdb8d0a
Ensure the size of our locking script never changes 2021-08-12 18:39:31 +10:00
dependabot[bot]
83c378db15
Bump tokio-tungstenite from 0.14.0 to 0.15.0
Bumps [tokio-tungstenite](https://github.com/snapview/tokio-tungstenite) from 0.14.0 to 0.15.0.
- [Release notes](https://github.com/snapview/tokio-tungstenite/releases)
- [Changelog](https://github.com/snapview/tokio-tungstenite/blob/master/CHANGELOG.md)
- [Commits](https://github.com/snapview/tokio-tungstenite/compare/v0.14.0...v0.15.0)

---
updated-dependencies:
- dependency-name: tokio-tungstenite
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
2021-07-12 11:09:44 +00:00
dependabot[bot]
8ea0877dc1
Bump comfy-table from 4.0.0 to 4.0.1
Bumps [comfy-table](https://github.com/nukesor/comfy-table) from 4.0.0 to 4.0.1.
- [Release notes](https://github.com/nukesor/comfy-table/releases)
- [Changelog](https://github.com/Nukesor/comfy-table/blob/master/CHANGELOG.md)
- [Commits](https://github.com/nukesor/comfy-table/compare/v4.0.0...v4.0.1)

---
updated-dependencies:
- dependency-name: comfy-table
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
2021-07-09 11:08:51 +00:00
COMIT Botty McBotface
403e3d2b33 Prepare release 0.8.0 2021-07-09 02:02:13 +00:00
Thomas Eizinger
d21bd556ec
Remove rendezvous point default
This also fixes a bug where an empty string wasn't actually allowed
as a rendezvous point in the ASB's initial setup wizard.
2021-07-09 09:44:56 +10:00
bors[bot]
9fc53d3f84
Merge #615
615: Update default Monero node URLs and info r=thomaseizinger a=da-kami

xmr.to nodes are not served at the xmr.to domain but moved to melo.tools

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-07-08 06:43:12 +00:00
Daniel Karzel
0dc3943d9c
Update default Monero node URLs and info
xmr.to nodes are not served at the xmr.to domain but moved to melo.tools
2021-07-08 16:42:18 +10:00
bors[bot]
6208689237
Merge #620
620: Revert "Prepare release 0.8.0" r=thomaseizinger a=da-kami

This reverts commit 50da9580

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-07-08 06:26:26 +00:00
bors[bot]
238e52228e
Merge #618
618: Don't spam on transaction status change r=da-kami a=thomaseizinger



Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-07-08 05:49:39 +00:00
bors[bot]
00f581dee1
Merge #619
619: Disallow Bitcoin legacy addresses r=da-kami a=thomaseizinger



Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-07-08 05:32:38 +00:00
Daniel Karzel
ab24f7bce5
Revert "Prepare release 0.8.0"
This reverts commit 50da9580
2021-07-08 15:03:37 +10:00
bors[bot]
b7a832eb7a
Merge #616
616: Don't spam the user while waiting for BTC to be deposited r=thomaseizinger a=thomaseizinger



Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-07-08 04:48:55 +00:00
Thomas Eizinger
2c8bbe4913
Remove left-over "half" of log message
With the move to using tracing's fields, this log message was not
properly updated.
2021-07-08 13:40:11 +10:00
Thomas Eizinger
94f089f4f2
Disallow Bitcoin legacy addresses
These cause problems during fee estimation.
2021-07-08 13:36:43 +10:00
Thomas Eizinger
367d75cab6
Reduce code duplication and make evaluation order determinisitic
The Rust compiler doesn't guarantee in which order field initialization
are executed. By extracting them, we can make sure they run in a certain
order. This will be important as we add more validations that can
fail.
2021-07-08 13:31:57 +10:00
Thomas Eizinger
46ffc34f40
Don't spam on transaction status change 2021-07-08 12:55:37 +10:00
Thomas Eizinger
991dbf496e
Extract print_status_change so it is easily testable 2021-07-08 12:55:36 +10:00
Thomas Eizinger
2eb7fab0c3
Make capture_logs available for the whole crate 2021-07-08 12:55:33 +10:00
Daniel Karzel
6abf83f4ad
Sort seller list inside of list_sellers
By sorting the list inside we have a more deterministic output that makes processing in JSON easier.
2021-07-08 12:42:26 +10:00
Thomas Eizinger
cacfc50fb2
Don't spam the user while waiting for BTC 2021-07-08 12:14:37 +10:00
Thomas Eizinger
56a48e71ef
Add failing test that shows spamming of output 2021-07-08 12:12:55 +10:00
Thomas Eizinger
56ea23c2a3
Assert log output for determine_btc_to_swap 2021-07-08 12:10:49 +10:00
Thomas Eizinger
a347dd8b97
Move helper structs below tests 2021-07-08 11:15:24 +10:00
COMIT Botty McBotface
50da958078 Prepare release 0.8.0 2021-07-07 08:31:00 +00:00
Thomas Eizinger
714514edbc
Provide a commit-specific version output
For builds made directly on the tag, the output of `--version` will
not change. For builds not made on a tagged commit, the output will
look something like this:

```
> swap --version

swap 0.7.0-117-g93161f9
```

Fixes #409.
2021-07-07 17:55:13 +10:00
Thomas Eizinger
5c37fe6733
Make struct-opt docs more consistent
- Remove dots from the of help messages
- Unify wording
2021-07-07 17:14:56 +10:00
Thomas Eizinger
987f8abb9d
Include unreachable nodes in table output
We emit an `info!` log for every peer that we discover but only ever
emitted a `debug!` log if we fail to connect. This leads to a situation
where the user would run `swap list-sellers`, the logs would say
"Discovered XYZ at ABC" but then get a potentially empty table.

To not confuse the user, we include unreachable nodes in the table output.
For example:

```
Connected to rendezvous point, discovering nodes in 'xmr-btc-swap-testnet' namespace ...
Discovered peer 12D3KooWPZ69DRp4wbGB3wJsxxsg1XW1EVZ2evtVwcARCF3a1nrx at /dns4/ac4hgzmsmekwekjbdl77brufqqbylddugzze4tel6qsnlympgmr46iid.onion/tcp/8765
+-------+--------------+--------------+-------------+----------------------------------------------------------------------------------------------------------------------------------------+
| PRICE | MIN_QUANTITY | MAX_QUANTITY | STATUS      | ADDRESS                                                                                                                                |
+============================================================================================================================================================================================+
| ???   | ???          | ???          | Unreachable | /dns4/ac4hgzmsmekwekjbdl77brufqqbylddugzze4tel6qsnlympgmr46iid.onion/tcp/8765/p2p/12D3KooWPZ69DRp4wbGB3wJsxxsg1XW1EVZ2evtVwcARCF3a1nrx |
+-------+--------------+--------------+-------------+----------------------------------------------------------------------------------------------------------------------------------------+
```
2021-07-07 17:14:56 +10:00
Thomas Eizinger
09f395a26b
Don't print level and time for list-sellers
This is now consistent with the `buy-xmr` command.
2021-07-07 17:14:55 +10:00
Thomas Eizinger
40eccd089f
Change --data-dir for --data-base-dir 2021-07-07 17:14:55 +10:00
Thomas Eizinger
3b1789fe07
Make things private if possible 2021-07-07 17:14:55 +10:00
Thomas Eizinger
8f50eb2f34
Utilize tracing's fields more 2021-07-07 16:02:02 +10:00
Thomas Eizinger
9119ce5cc4
Tidy up log messages across the codebase
1. Clearly separate the log messages from any fields that are
captured. The log message itself should be meaningful because it
depends on the underlying formatter, how/if the fields are displayed.
2. Some log messages had very little context, expand that.
3. Wording of errors was inconsistent, hopefully all errors should
now start with `Failed to ...`.
4. Some log messages were duplicated across multiple layers (like opening
the database).
5. Some log messages were split into two where one part is now an `error!`
and the 2nd part is an `info!` on what is happening next.
6. Where appropriate, punctuation has been removed to not interrupt
the reader's flow.
2021-07-07 16:02:00 +10:00
Thomas Eizinger
78480547d5
Don't import tracing's macros
Log statements end up getting changed constantly and having to clean
up imports after that is annoying, for example, if the last `info!`
in a file disappears, you end up with an unused import warning.

Fully qualifying tracing's macros prevents that and also communicates
clearly that we are using tracing and not log.
2021-07-07 16:01:33 +10:00
Thomas Eizinger
1d0d38cd48
Explain why we clear the bip32_derivation map 2021-07-07 14:37:56 +10:00
Thomas Eizinger
acfd2dd6bb
Store Monero receive address in database and load it on resume 2021-07-06 20:08:24 +10:00
Thomas Eizinger
5463bde4f8
Add a mandatory --change-address parameter to buy-xmr
Fixes #513.
2021-07-06 20:07:53 +10:00
Thomas Eizinger
683d565679
Make variable naming consistent 2021-07-06 20:06:41 +10:00
Thomas Eizinger
8b59ac26ba
Replace sorting with slice pattern matching
Sorting `psbt.output` by `witness_script` is at times pointless
because it might be set to `None`. To be more robust, we pattern
match against the produced transaction.
2021-07-06 20:06:40 +10:00
Thomas Eizinger
348fca0827
Add isolated test for list_sellers function 2021-07-06 20:03:53 +10:00
Thomas Eizinger
e642f5c148
Extend SwarmExt with ability to listen on TCP localhost
The CLI's transport doesn't support memory addresses and it also shouldn't support those by default. To be able to use it in tests, we extend the `SwarmExt` trait with the ability to listen on local TCP addresses with a random port.
2021-07-06 20:03:19 +10:00
rishflab
93a0692998
Integrate rendezvous protocol into ASB
The rendezvous protocol allows us to register all of our external
addresses. Hence, the first step is to allow the user to configure
external addresses as part of the config. In the future, there might
be an automated way of determining these.

To register with a rendezvous node, the user needs to configure which
one. CoBloX is running a rendezvous node that acts as the default by
every spec-compliant node will do the job just fine. This behaviour
is optional which is why our custom behaviour is wrapped in a `Toggle`.

We also want our node to re-register after half the time of the
registration has passed. To make this simpler and allow for testing in
isolation, we create a custom behaviour that wraps the libp2p rendezvous
behaviour.
2021-07-06 20:03:19 +10:00
Daniel Karzel
ff10edd8a4
Add the list-sellers command to the CLI
This command uses a rendezvous node to find sellers (i.e. ASBs) and query them for quotes.
Sellers, that can be dialed and queried for a quote will be listed.
2021-07-06 20:03:18 +10:00
Daniel Karzel
f45cde84ab
comfy-table instead of prettytable-rs 2021-07-06 20:01:48 +10:00
Thomas Eizinger
b4fafeba6b
Allow large enum variant lint
The docs say one needs to measure the impact of this before taking
action. We didn't measure anything. Let's not take any action.
2021-07-06 19:58:41 +10:00
Thomas Eizinger
e163942850
Merge transport and behaviour module into network 2021-07-06 19:58:40 +10:00
Daniel Karzel
ff8cca2e27
Pass in CLI behaviour when creating swarm
This allows us to reuse the swarm setup with a different behaviour for discovering ASBs with a rendezvous node.
2021-07-06 19:58:36 +10:00
bors[bot]
4cd27e372c
Merge #604
604: Bump torut from 0.1.9 to 0.1.10 r=thomaseizinger a=dependabot[bot]

Bumps [torut](https://github.com/teawithsand/torut) from 0.1.9 to 0.1.10.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/teawithsand/torut/releases">torut's releases</a>.</em></p>
<blockquote>
<h2>Release 0.1.10</h2>
<p>Deprecated onion services V2 and all stuff associated with it.
Updated tokio version.
Implemented std::error::Error for error types in this crate, support for these errors is very basic and all that was done was implementing Error trait for existing error types. No error structure refactoring was done.</p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="8a26ddde79"><code>8a26ddd</code></a> Implemented std::error::Error for error types</li>
<li><a href="c5cee8a369"><code>c5cee8a</code></a> Implemented std::error::Error for error types</li>
<li><a href="caed51d697"><code>caed51d</code></a> Deprecated v2 onion service stuff</li>
<li><a href="87bcde20bb"><code>87bcde2</code></a> Updated tokio version</li>
<li>See full diff in <a href="https://github.com/teawithsand/torut/compare/v0.1.9...v0.1.10">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=torut&package-manager=cargo&previous-version=0.1.9&new-version=0.1.10)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-07-06 06:49:06 +00:00
bors[bot]
72673fa166
Merge #605
605: Merge `--seller-addr` and `--seller-peer-id` into `--seller` parameter r=thomaseizinger a=thomaseizinger

This simplifies the CLI's interface.

It wills also play nicely with https://github.com/comit-network/xmr-btc-swap/pull/593.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-07-06 05:55:25 +00:00
Thomas Eizinger
d49f4ea60d
Test saving and loading of addresses in isolation 2021-07-06 15:53:14 +10:00
Thomas Eizinger
ec4234fbb9
Merge --seller-addr and --seller-peer-id into --seller parameter
This simplifies the CLI's interface.
2021-07-06 14:51:08 +10:00
Thomas Eizinger
c2daf7a11e
Make use of torut's errors implementing std::error::Error
Anyhow all the things!
2021-07-06 14:46:00 +10:00
Thomas Eizinger
8057b45e17
Test new reachability function in tests 2021-06-30 18:28:51 +10:00
Thomas Eizinger
92ed8d9c04
Refuse to dial addresses via Tor that are almost certainly not reachable
For now, this just concerns loopback addresses.
2021-06-30 18:28:47 +10:00
Thomas Eizinger
ec59184e85
Refactor fmt_as_address_string to return a structured value
Instead of formatting to a string right away, we parse the multiaddress
into a stricter data structure that only allows the kind of addresses
we can dial through Tor.

This will allow us to perform further checks on the parsed address.
2021-06-30 18:15:26 +10:00
bors[bot]
b708d5a4dd
Merge #585
585: Configurable kraken websocket url via the ASB config r=thomaseizinger a=cimble-code

- Allows the ASB operator to configure a custom kraken websocket url via the ASB config. 
- Addresses the issue of price control first brought up [here](https://github.com/comit-network/xmr-btc-swap/discussions/571)

>  Gotya. 
There is a relatively easy to implement (but temporary) solution for that. We could let the user configure the kraken websocket url via the ASB config. That way you can plug in your own service. The only requirement is that your service publishes prices updates in the same format as [kraken](https://docs.kraken.com/websockets/), e.g. : 

_Originally posted by @bonomat in https://github.com/comit-network/xmr-btc-swap/discussions/571#discussioncomment-885535_

Co-authored-by: Your Name <you@example.com>
2021-06-28 12:05:00 +00:00
Your Name
665ea503d2 Make price ticker ws url configurable 2021-06-28 03:19:49 -07:00
Daniel Karzel
dc89a837e7
Do not actively set KeepAlice::No for swap_setup
Closing the connection upon completing the `swap_setup` protocol caused problems on the ASB side, because the CLI would close the connection before the last message was properly processed. This would result in swaps going into execution on the CLI side, but not on the ASB side.
The CLI ensures an open connection to the ASB over the complete course of a swap. So it does not make much sense to allow a protocol to close the connection (the CLI would immediately redial).
For the Alice we set the initial `KeepAlive` to `10` seconds because Bob is expected to request a spot price in reasonable time after opening a connection on the protocol. Since Tor connections can take some time we set 10 seconds fow now for resilience.
2021-06-28 12:08:51 +10:00
Daniel Karzel
cd14e22cdf
Longer timeout (120 secs) for swap_setup protocol
Given that we combined the `spot_price` and the `execution_setup` messaging into one protocol we should allow the protocol to take longer than 60 seconds to complete.
This is especially important for connections over Tor, where messaging can take significantly longer than over clearnet.
I ran some tests with Tor and did not run into issues with the 60 seconds, but we get very close to the timeout, so we better make it more resilient by adding more time.
2021-06-28 12:08:51 +10:00
Daniel Karzel
fd18a07426
Flush and close swap_setup substreams
When swapping on testnet we ran into a problem where the CLI started the swap after sending all messages successfully, but the ASB ran into a `connection closed` error at the end of the `swap_setup` and the swap state machine was never actually triggered.

Flushing and closing the stream on both sides should ensure that we don't run into this problem and both parties gracefully exit the protocol.
2021-06-28 12:08:50 +10:00
Daniel Karzel
c2c9e975ef
Quote protocol asb/cli instead of alice/bob
The quote protocol has no relation to the protocol roles but to the application hence the rename.
2021-06-28 10:04:08 +10:00
Daniel Karzel
c0070f8fa7
Move files from protocol to appropriate module
Some network and application specific code does not belong in the protocol module and was moved.
Eventloop, recovery and the outside behaviour were moved to the respective application module because they are application specific.

The `swap_setup` was moved into the network module because upon change both sides will have to be changed and should thus stay close together.
2021-06-28 10:04:08 +10:00
Daniel Karzel
818147a629
swap_setup instead of spot_price and execution_setup
Having `spot_price` and `execution_setup` as separate protocols did not bring any advantages, but was problematic because we had to ensure that `execution_setup` would be triggered after `spot_price`. Because of this dependency it is better to combine the protocols into one.

Combining the protocols also allows a refactoring to get rid of the `libp2p-async-await` dependency.

Alice always listens for the `swap_setup` protocol. When Bob opens a substream on that protocol the spot price is communicated, and then all execution setup messages (swap-id and signature exchange).
2021-06-28 10:04:07 +10:00
Daniel Karzel
529de8d5fd
ASB aborts if CLI does not lock BTC
Includes a new state that is used to await BTC lock tx finality. Upon starting the swap we initially only wait for the BTC lock tx to be seen in the mempool.
This is guarded by a short timeout (3 mins), because it is assumed that in the current setup (sport_price + execution_setup only triggered upon funds being available already) the lock transaction should be picked up almost instanly after the execution setup succeeded.
2021-06-23 17:54:42 +10:00
Daniel Karzel
c4c798ea20
Timeout on execution_setup for ASB
Similar to the CLI the ASB has to ensure that the execution_setup is executed within a certain time.
Without a timeout the price (returned by `spot_price` would be guaranteed with the CLI indefinitely.
2021-06-23 17:54:42 +10:00
Daniel Karzel
1ae377ef24
Request timeout when swapping over Tor
It seems the current chosen channel timeouts are still not optimal.
I ran into issues with swapping over Tor and traced them down to the CLI timeout of the bmrng channel.
It appears that the ASB was not running as quick as the CLI, which caused a timeout on the CLI side (in addition to the delay when sending messages over Tor).
Only `execution_setup` caused the problem so far, but I would recommend changing all the channel timeouts to one minute to avoid this problem.
2021-06-23 17:53:50 +10:00
bors[bot]
c6b0013b92
Merge #581 #583
581: Remove dead code r=thomaseizinger a=da-kami



583: Bump reqwest from 0.11.3 to 0.11.4 r=thomaseizinger a=dependabot[bot]

Bumps [reqwest](https://github.com/seanmonstar/reqwest) from 0.11.3 to 0.11.4.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/releases">reqwest's releases</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing &quot;invalid&quot; certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/seanmonstar/reqwest/blob/master/CHANGELOG.md">reqwest's changelog</a>.</em></p>
<blockquote>
<h2>v0.11.4</h2>
<ul>
<li>Add <code>ClientBuilder::resolve()</code> option to override DNS resolution for specific domains.</li>
<li>Add <code>native-tls-alpn</code> Cargo feature to use ALPN with the native-tls backend.</li>
<li>Add <code>ClientBuilder::deflate()</code> option and <code>deflate</code> Cargo feature to support decoding response bodies using deflate.</li>
<li>Add <code>RequestBuilder::version()</code> to allow setting the HTTP version of a request.</li>
<li>Fix allowing &quot;invalid&quot; certificates with the <code>rustls-tls</code> backend, when the server uses TLS v1.2 or v1.3.</li>
<li>(wasm) Add <code>try_clone</code> to <code>Request</code> and <code>RequestBuilder</code></li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="f5fe17876a"><code>f5fe178</code></a> v0.11.4</li>
<li><a href="8e5af459e5"><code>8e5af45</code></a> Allow overriding of DNS resolution to specified IP addresses(<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/561">#561</a>) (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1277">#1277</a>)</li>
<li><a href="c4388fcff9"><code>c4388fc</code></a> WASM: Add <code>try_clone</code> implementations to <code>Request</code> and <code>RequestBuilder</code> (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1286">#1286</a>)</li>
<li><a href="b48cb4a5aa"><code>b48cb4a</code></a> Add native-tls-alpn feature (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1283">#1283</a>)</li>
<li><a href="bbeb1ede4e"><code>bbeb1ed</code></a> Bump ssri from 6.0.1 to 6.0.2 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1262">#1262</a>)</li>
<li><a href="841d47c6a2"><code>841d47c</code></a> Bump url-parse from 1.4.7 to 1.5.1 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1267">#1267</a>)</li>
<li><a href="33bc7939b4"><code>33bc793</code></a> Bump lodash from 4.17.19 to 4.17.21 in /examples/wasm_github_fetch (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1269">#1269</a>)</li>
<li><a href="b0af278f78"><code>b0af278</code></a> Implement &quot;default&quot; functions of the trait to fix &quot;insecure&quot; mode (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1259">#1259</a>)</li>
<li><a href="8d3e27966c"><code>8d3e279</code></a> use ZlibDecoder for deflate responses (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1257">#1257</a>)</li>
<li><a href="b88f309339"><code>b88f309</code></a> Fix small typos in <code>Client</code> docs (<a href="https://github-redirect.dependabot.com/seanmonstar/reqwest/issues/1253">#1253</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/seanmonstar/reqwest/compare/v0.11.3...v0.11.4">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=reqwest&package-manager=cargo&previous-version=0.11.3&new-version=0.11.4)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: Daniel Karzel <daniel@comit.network>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-06-23 03:41:02 +00:00
bors[bot]
858c6d85ce
Merge #576
576: Bump to Rust 1.53 r=thomaseizinger a=thomaseizinger



Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-06-23 03:17:17 +00:00
Daniel Karzel
ca6b889632
Remove dead code 2021-06-22 17:06:21 +10:00
bors[bot]
3e88e13fbb
Merge #566 #568
566: Bump rand_chacha from 0.3.0 to 0.3.1 r=thomaseizinger a=dependabot[bot]

Bumps [rand_chacha](https://github.com/rust-random/rand) from 0.3.0 to 0.3.1.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/rust-random/rand/blob/master/CHANGELOG.md">rand_chacha's changelog</a>.</em></p>
<blockquote>
<h2>[0.3.19] - 2017-12-27</h2>
<h3>Changed</h3>
<ul>
<li>Require <code>log &lt;= 0.3.8</code> for dev builds</li>
<li>Update <code>fuchsia-zircon</code> dependency to 0.3</li>
<li>Fix broken links in docs (to unblock compiler docs testing CI)</li>
</ul>
<h2>[0.3.18] - 2017-11-06</h2>
<h3>Changed</h3>
<ul>
<li><code>thread_rng</code> is seeded from the system time if <code>OsRng</code> fails</li>
<li><code>weak_rng</code> now uses <code>thread_rng</code> internally</li>
</ul>
<h2>[0.3.17] - 2017-10-07</h2>
<h3>Changed</h3>
<ul>
<li>Fuchsia: Magenta was renamed Zircon</li>
</ul>
<h2>[0.3.16] - 2017-07-27</h2>
<h3>Added</h3>
<ul>
<li>Implement Debug for mote non-public types</li>
<li>implement <code>Rand</code> for (i|u)i128</li>
<li>Support for Fuchsia</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Add inline attribute to SampleRange::construct_range.
This improves the benchmark for sample in 11% and for shuffle in 16%.</li>
<li>Use <code>RtlGenRandom</code> instead of <code>CryptGenRandom</code></li>
</ul>
<h2>[0.3.15] - 2016-11-26</h2>
<h3>Added</h3>
<ul>
<li>Add <code>Rng</code> trait method <code>choose_mut</code></li>
<li>Redox support</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Use <code>arc4rand</code> for <code>OsRng</code> on FreeBSD.</li>
<li>Use <code>arc4random(3)</code> for <code>OsRng</code> on OpenBSD.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Fix filling buffers 4 GiB or larger with <code>OsRng::fill_bytes</code> on Windows</li>
</ul>
<h2>[0.3.14] - 2016-02-13</h2>
<h3>Fixed</h3>
<ul>
<li>Inline definitions from winapi/advapi32, which decreases build times</li>
</ul>
<h2>[0.3.13] - 2016-01-09</h2>
<h3>Fixed</h3>
<ul>
<li>Compatible with Rust 1.7.0-nightly (needed some extra type annotations)</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="98a0339f99"><code>98a0339</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1135">#1135</a> from dhardy/work</li>
<li><a href="a7f8fb72d7"><code>a7f8fb7</code></a> Prepare rand_chacha v0.3.1 release</li>
<li><a href="09d3df3119"><code>09d3df3</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1130">#1130</a> from dhardy/work</li>
<li><a href="d167dd25d2"><code>d167dd2</code></a> Deprecate ReadRng</li>
<li><a href="e3bc4a1357"><code>e3bc4a1</code></a> Do not impl serde for ReadRng or ReseedingRng</li>
<li><a href="66b163632e"><code>66b1636</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1132">#1132</a> from rust-random/readme-wasm-note</li>
<li><a href="d9c6a76048"><code>d9c6a76</code></a> README: add note regarding wasm32-unknown-unknown</li>
<li><a href="4726d328d6"><code>4726d32</code></a> Update minimum version of packed_simd_2</li>
<li><a href="f6bbfcfa89"><code>f6bbfcf</code></a> serde for BlockRng, ReseedingRng and ReadRng</li>
<li><a href="2732f2d6a8"><code>2732f2d</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/rust-random/rand/issues/1116">#1116</a> from vks/criterion</li>
<li>Additional commits viewable in <a href="https://github.com/rust-random/rand/compare/rand_chacha-0.3.0...rand_chacha-0.3.1">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=rand_chacha&package-manager=cargo&previous-version=0.3.0&new-version=0.3.1)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

568: Bump bdk from 0.7.0 to 0.8.0 r=thomaseizinger a=dependabot[bot]

Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.7.0 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md">bdk's changelog</a>.</em></p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="33b45ebe82"><code>33b45eb</code></a> Bump version to 0.8.0</li>
<li><a href="2faed425ed"><code>2faed42</code></a> Update CHANGELOG</li>
<li><a href="2cc05c07a5"><code>2cc05c0</code></a> Bump version in <code>src/lib.rs</code></li>
<li><a href="9205295332"><code>9205295</code></a> Merge commit 'refs/pull/365/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="3b446c9e14"><code>3b446c9</code></a> Use no_run instead of ignore</li>
<li><a href="378167efca"><code>378167e</code></a> Remove explicit <code>feature(external_doc)</code></li>
<li><a href="224be27aa8"><code>224be27</code></a> Fix example/doctests format</li>
<li><a href="4a23070cc8"><code>4a23070</code></a> [ci] Check fmt for examples/doctests</li>
<li><a href="f8117c0f9f"><code>f8117c0</code></a> Bump version to 0.8.0-rc.1</li>
<li><a href="0ec064ef13"><code>0ec064e</code></a> Use AddressInfo in private methods</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.7.0...v0.8.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=bdk&package-manager=cargo&previous-version=0.7.0&new-version=0.8.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-06-21 03:12:03 +00:00
Thomas Eizinger
7120a1f70a
Don't depend on core::fmt through bitcoin_hashes re-export 2021-06-21 12:14:02 +10:00
Thomas Eizinger
3aa028e3bf
Use or-pattern stabilized in Rust 1.53 where possible 2021-06-21 11:57:21 +10:00
Thomas Eizinger
ac0b0150e6
Upgrade to Rust 1.53
Also fix all clippy lints that came up.
2021-06-21 11:56:04 +10:00
Thomas Eizinger
b7064578ca
Reduce level of indentation of match statements 2021-06-21 11:46:24 +10:00
Thomas Eizinger
f1182f97c0
Simplify match statement
This code is unnecessarily complicated.
2021-06-21 11:31:24 +10:00
Thomas Eizinger
707bae9ff0
Merge patterns of nested match 2021-06-21 11:22:45 +10:00
dependabot[bot]
9577875834
Bump bdk from 0.7.0 to 0.8.0
Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.7.0 to 0.8.0.
- [Release notes](https://github.com/bitcoindevkit/bdk/releases)
- [Changelog](https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md)
- [Commits](https://github.com/bitcoindevkit/bdk/compare/v0.7.0...v0.8.0)

---
updated-dependencies:
- dependency-name: bdk
  dependency-type: direct:production
  update-type: version-update:semver-minor
...

Signed-off-by: dependabot[bot] <support@github.com>
2021-06-21 11:16:45 +10:00
Thomas Eizinger
1ba186aa63
Make log message a proper statement
"Listening on" is only half a sentence.
2021-06-21 09:01:21 +10:00
Thomas Eizinger
ff8cd0ab93
Harmonise log statements between applications
The refactoring of the transport initialization removed the log statement
for the asb. We re-introduce this log statement in main for consistency.
2021-06-21 09:01:20 +10:00
Thomas Eizinger
8a30ef725c
Refactor transports to construct them specific for each application
Instead of splitting up the transports into capabilities, we compose
them directly for each application. This allows us to remove the
websocket transport for the CLI which is really only needed for the
ASB to allow retrieval of quotes via the browser.
2021-06-21 09:01:19 +10:00
Thomas Eizinger
90deb6451c
Rename swarm constructors to be per tool instead of per role 2021-06-21 09:00:10 +10:00
Thomas Eizinger
d19231d811
Refactor Tor transport to be dial-only
Libp2p's transports are meant to be composed. Hence, any form of
fallback should be implemented by emitting `MultiaddrNotSupported`
from the `listen` and `dial` functions.

This allows us to completely remove the tcp transport from the tor
transport.
2021-06-21 09:00:10 +10:00
Thomas Eizinger
8bd6c9dcfc
Simplify construction of Socks5Stream 2021-06-21 09:00:09 +10:00
Thomas Eizinger
ea0fd1eb53
Inline functions to reduce complexity induced by indirection 2021-06-21 09:00:09 +10:00
Thomas Eizinger
97a09807dd
Use BoxFuture type alias to avoid clippy's complexity nag 2021-06-21 09:00:09 +10:00
Thomas Eizinger
d01e444c90
Import anyhow::Result instead of fully-qualifying it 2021-06-21 09:00:06 +10:00
bors[bot]
7f2aa59880
Merge #504 #547 #556 #563 #564
504: Bump bdk from 0.6.0 to 0.7.0 r=thomaseizinger a=dependabot[bot]

Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.6.0 to 0.7.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/v0.7.0/CHANGELOG.md">bdk's changelog</a>.</em></p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="766570abfd"><code>766570a</code></a> Bump version to 0.7.0</li>
<li><a href="934ec366d9"><code>934ec36</code></a> Use the released <code>testutils-macros</code></li>
<li><a href="d0733e9496"><code>d0733e9</code></a> Bump version in <code>src/lib.rs</code></li>
<li><a href="3c7a1f5918"><code>3c7a1f5</code></a> Bump <code>testutils-macros</code> to <code>v0.6.0</code></li>
<li><a href="85aadaccd2"><code>85aadac</code></a> Update changelog in preparation of <code>v0.7.0</code></li>
<li><a href="fad0fe9f30"><code>fad0fe9</code></a> Update create transaction example code</li>
<li><a href="47f26447da"><code>47f2644</code></a> continue signing when finding already finalized inputs</li>
<li><a href="3608ff9f14"><code>3608ff9</code></a> Merge commit 'refs/pull/341/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="898dfe6cf1"><code>898dfe6</code></a> get psbt inputs with bounds check</li>
<li><a href="7961ae7f8e"><code>7961ae7</code></a> Check index out of bound also for tx inputs not only for psbt inputs</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.6.0...v0.7.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=bdk&package-manager=cargo&previous-version=0.6.0&new-version=0.7.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

547: Print the Bitcoin address to the terminal as a QR code r=thomaseizinger a=xscd

It helps to fund the Bitcoin address with your mobile device without a need to copy-paste the receive address. 

Here is how it looks like under different terminals:
1) Gnome Terminal:
![1](https://user-images.githubusercontent.com/46658470/120103390-0e87dd80-c158-11eb-9e0f-da5af89ea8d7.png)
2) Alacritty:
![2](https://user-images.githubusercontent.com/46658470/120103398-1ba4cc80-c158-11eb-89c0-8a54e8902658.png)
3) Kitty:
![3](https://user-images.githubusercontent.com/46658470/120103411-265f6180-c158-11eb-95e1-b37c2d16c2b6.png)
4) Konsole:
![4](https://user-images.githubusercontent.com/46658470/120103421-2f503300-c158-11eb-83bf-82d55b6e2dd8.png)



556: Bump rust_decimal from 1.14.1 to 1.14.2 r=thomaseizinger a=dependabot[bot]

Bumps [rust_decimal](https://github.com/paupino/rust-decimal) from 1.14.1 to 1.14.2.
<details>
<summary>Commits</summary>
<ul>
<li><a href="16b41cc58c"><code>16b41cc</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/394">#394</a> from paupino/version/1.14.2</li>
<li><a href="c7bd3bf987"><code>c7bd3bf</code></a> Version 1.14.2</li>
<li><a href="c0117ddc36"><code>c0117dd</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/393">#393</a> from paupino/issue/392</li>
<li><a href="a231fbf12c"><code>a231fbf</code></a> Fixes issue with remainder overflow</li>
<li>See full diff in <a href="https://github.com/paupino/rust-decimal/compare/1.14.1...1.14.2">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=rust_decimal&package-manager=cargo&previous-version=1.14.1&new-version=1.14.2)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

563: Bump tokio from 1.6.0 to 1.7.0 r=thomaseizinger a=dependabot[bot]

Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.6.0 to 1.7.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/tokio-rs/tokio/releases">tokio's releases</a>.</em></p>
<blockquote>
<h2>Tokio v1.7.0</h2>
<h1>1.7.0 (June 15, 2021)</h1>
<h3>Added</h3>
<ul>
<li>net: add named pipes on windows (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3760">#3760</a>)</li>
<li>net: add <code>TcpSocket</code> from <code>std::net::TcpStream</code> conversion (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3838">#3838</a>)</li>
<li>sync: add <code>receiver_count</code> to <code>watch::Sender</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3729">#3729</a>)</li>
<li>sync: export <code>sync::notify::Notified</code> future publicly (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3840">#3840</a>)</li>
<li>tracing: instrument task wakers (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3836">#3836</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>macros: suppress <code>clippy::default_numeric_fallback</code> lint in generated code (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3831">#3831</a>)</li>
<li>runtime: immediately drop new tasks when runtime is shut down (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3752">#3752</a>)</li>
<li>sync: deprecate unused <code>mpsc::RecvError</code> type (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3833">#3833</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>io: clarify EOF condition for <code>AsyncReadExt::read_buf</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3850">#3850</a>)</li>
<li>io: clarify limits on return values of <code>AsyncWrite::poll_write</code> (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3820">#3820</a>)</li>
<li>sync: add examples to Semaphore (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3808">#3808</a>)</li>
</ul>
<h2>Tokio v1.6.2</h2>
<h3>Fixes</h3>
<ul>
<li>test: sub-ms <code>time:advance</code> regression introduced in 1.6 (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3852">#3852</a>)</li>
</ul>
<p><a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3852">#3852</a>: <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/pull/3852">tokio-rs/tokio#3852</a></p>
<h2>Tokio v1.6.1</h2>
<p>This release reverts <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3518">#3518</a> because it doesn't work on some kernels due to
a kernel bug. (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3803">#3803</a>)</p>
<p><a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3518">#3518</a>: <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3518">tokio-rs/tokio#3518</a>
<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3803">#3803</a>: <a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3803">tokio-rs/tokio#3803</a></p>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="34c6a26c01"><code>34c6a26</code></a> chore: prepare Tokio v1.7.0 (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3863">#3863</a>)</li>
<li><a href="97e7830364"><code>97e7830</code></a> net: provide NamedPipe{Client, Server} types and builders (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3760">#3760</a>)</li>
<li><a href="606206ecad"><code>606206e</code></a> Merge branch 'tokio-1.6.x' into merge-1.6.x</li>
<li><a href="dfe4013ff2"><code>dfe4013</code></a> chore: prepare Tokio 1.6.2 release (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3859">#3859</a>)</li>
<li><a href="18779aa2e2"><code>18779aa</code></a> time: fix time::advance() with sub-ms durations (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3852">#3852</a>)</li>
<li><a href="2c24a028f6"><code>2c24a02</code></a> chore: re-enable test_socket_pair on FreeBSD (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3844">#3844</a>)</li>
<li><a href="f55b77aadd"><code>f55b77a</code></a> tracing: emit waker op as str instead as Debug (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3853">#3853</a>)</li>
<li><a href="21de476ae7"><code>21de476</code></a> sync: export sync::notify::Notified future publicly (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3840">#3840</a>)</li>
<li><a href="cb147a2b3f"><code>cb147a2</code></a> sync: deprecate mpsc::RecvError (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3833">#3833</a>)</li>
<li><a href="f759240254"><code>f759240</code></a> chore: update version in README.md (<a href="https://github-redirect.dependabot.com/tokio-rs/tokio/issues/3851">#3851</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tokio/compare/tokio-1.6.0...tokio-1.7.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=tokio&package-manager=cargo&previous-version=1.6.0&new-version=1.7.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

564: Bump thomaseizinger/create-pull-request from 1.0.0 to 1.1.0 r=thomaseizinger a=dependabot[bot]

Bumps [thomaseizinger/create-pull-request](https://github.com/thomaseizinger/create-pull-request) from 1.0.0 to 1.1.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/blob/master/CHANGELOG.md">thomaseizinger/create-pull-request's changelog</a>.</em></p>
<blockquote>
<h2>[1.1.0] - 2021-06-16</h2>
<h3>Added</h3>
<ul>
<li>Git hook to make sure we always run <code>yarn build</code> before committing any Typescript changes. This should prevent dist/index.js from getting out of date.</li>
<li>Support for setting a proxy using the <code>HTTPS_PROXY</code> environment variable</li>
<li>Support for GitHub Enterprise by reading <code>process.env.GITHUB_REPOSITORY</code></li>
</ul>
<h3>Fixed</h3>
<ul>
<li>action.yml suggested to use <code>github-token</code> as the input where as in reality, we are looking for an input <code>github_token</code> (note the underscore!)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="285345fb83"><code>285345f</code></a> Add support for creating PR's in ghes and behind proxy (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/41">#41</a>)</li>
<li><a href="13c98abb44"><code>13c98ab</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/37">#37</a> from orestesgaolin/patch-1</li>
<li><a href="5c8c2b6c09"><code>5c8c2b6</code></a> Fix parameters in the example</li>
<li><a href="1dde00b9ad"><code>1dde00b</code></a> Adapt LICENSE</li>
<li><a href="655db51f4a"><code>655db51</code></a> Automatically set the hookspath to our git hooks</li>
<li><a href="cedbbbb2ba"><code>cedbbbb</code></a> Update README.md</li>
<li><a href="2cd3e70bc6"><code>2cd3e70</code></a> Add readme note about inputs</li>
<li><a href="faf5ed2aa5"><code>faf5ed2</code></a> Define Inputs type through type magic on payloads types</li>
<li><a href="3fb1c8b1be"><code>3fb1c8b</code></a> Fixing git url in package.json</li>
<li><a href="e46f94e6ae"><code>e46f94e</code></a> Add git hook for making sure we update index.js</li>
<li>Additional commits viewable in <a href="https://github.com/thomaseizinger/create-pull-request/compare/1.0.0...1.1.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=thomaseizinger/create-pull-request&package-manager=github_actions&previous-version=1.0.0&new-version=1.1.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

You can trigger a rebase of this PR by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: xscd <xscd@pm.me>
2021-06-17 01:06:54 +00:00
xscd
03857ca835 Print the Bitcoin address to the terminal as a QR code 2021-06-16 15:18:16 +03:00
dependabot[bot]
e9595487f6
Bump strum from 0.20.0 to 0.21.0
Bumps [strum](https://github.com/Peternator7/strum) from 0.20.0 to 0.21.0.
- [Release notes](https://github.com/Peternator7/strum/releases)
- [Changelog](https://github.com/Peternator7/strum/blob/master/CHANGELOG.md)
- [Commits](https://github.com/Peternator7/strum/commits)

Signed-off-by: dependabot[bot] <support@github.com>
2021-06-01 06:45:25 +00:00
bors[bot]
eb705d3e9c
Merge #515
515: Make it easier to create a bitcoin::Wallet for testing r=thomaseizinger a=thomaseizinger

Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.

The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.

This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-05-28 08:57:22 +00:00
dependabot[bot]
6badf09394
Bump bdk from 0.6.0 to 0.7.0
Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.6.0 to 0.7.0.
- [Release notes](https://github.com/bitcoindevkit/bdk/releases)
- [Changelog](https://github.com/bitcoindevkit/bdk/blob/v0.7.0/CHANGELOG.md)
- [Commits](https://github.com/bitcoindevkit/bdk/compare/v0.6.0...v0.7.0)

Signed-off-by: dependabot[bot] <support@github.com>
2021-05-28 18:42:25 +10:00
COMIT Botty McBotface
7e6ff81efb Prepare release 0.7.0 2021-05-28 07:17:26 +00:00
bors[bot]
5385fc1aa0
Merge #531 #535
531: Bump thiserror from 1.0.24 to 1.0.25 r=thomaseizinger a=dependabot[bot]

Bumps [thiserror](https://github.com/dtolnay/thiserror) from 1.0.24 to 1.0.25.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dtolnay/thiserror/releases">thiserror's releases</a>.</em></p>
<blockquote>
<h2>1.0.25</h2>
<ul>
<li>Support <code>error(transparent)</code> on errors containing a non-<code>'static</code> inner error (<a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/113">#113</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="19cb5cee4b"><code>19cb5ce</code></a> Release 1.0.25</li>
<li><a href="e49c10f2ba"><code>e49c10f</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/dtolnay/thiserror/issues/134">#134</a> from dtolnay/nonstatic</li>
<li><a href="1ed8751081"><code>1ed8751</code></a> Support non-static AsDynError lifetimes</li>
<li><a href="51a1ff6593"><code>51a1ff6</code></a> Add regression test for issue 113</li>
<li><a href="ee2a47d3af"><code>ee2a47d</code></a> Adjust macro hygiene test formatting</li>
<li><a href="c610d97267"><code>c610d97</code></a> Update ui test suite to nightly-2021-05-14</li>
<li><a href="c10adbc25e"><code>c10adbc</code></a> Ignore manual_map clippy lint</li>
<li>See full diff in <a href="https://github.com/dtolnay/thiserror/compare/1.0.24...1.0.25">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=thiserror&package-manager=cargo&previous-version=1.0.24&new-version=1.0.25)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

535: Bitcoin network check when building PSBT r=da-kami a=da-kami

This ensures that funds are not sent to an address on the wrong network.

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-28 06:16:59 +00:00
Thomas Eizinger
51316d8183
Make it easier to create a bitcoin::Wallet for testing
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.

The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.

This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
2021-05-28 15:26:19 +10:00
Thomas Eizinger
229d840990
Introduce dedicated ParseResult to simplify error handling in main 2021-05-28 15:22:55 +10:00
Thomas Eizinger
d43ba33e15
Lift out Ok wrapping from match expression 2021-05-28 15:22:52 +10:00
Daniel Karzel
766ac706de
Application arg tests
Includes validation for given Bitcoin address against network.
2021-05-28 14:50:43 +10:00
bors[bot]
baf5a0896e
Merge #536
536: Switch to using stable Rust instead of nightly r=thomaseizinger a=thomaseizinger



Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-05-28 04:47:26 +00:00
Daniel Karzel
202f6d1fa0
Bitcoin network check when building PSBT
This ensures that funds are not sent to an address on the wrong network.
2021-05-28 09:54:35 +10:00
Daniel Karzel
c9064d5a37
Add ping protocol to ensure connection is alive
Adds the ping behaviour to both ASB and CLI behaviour that periodically pings a connected party to ensure that the underlying network connection is still alive.
This fixes problems with long-running connections that become dead without a connection closure being reported back to the swarm.
2021-05-27 11:19:27 +10:00
Thomas Eizinger
8f9d612af2
Change to stable Rust 1.52
Fix clippy warnings that are new in this version.
2021-05-25 16:11:49 +10:00
Thomas Eizinger
b8cb9e1b8b
Update secp256kfun and rand to latest version
This will allow us to compile on stable Rust.
The latest version of `secp256kfun` uses `curve25519-dalek-ng` instead
of the original curve25519-dalek crate. Instead of converting back and
forth, we simply switch to this crate as well. Judging from the README
it is just a fork because there was trouble between the maintainers of
the original crate.
2021-05-25 15:35:13 +10:00
Thomas Eizinger
e79ac4563b
Delete unused code 2021-05-25 15:32:03 +10:00
TDevD
5da075f533 fix typo 2021-05-24 10:24:06 +02:00
COMIT Botty McBotface
3f2d094f65
Prepare release 0.6.0 2021-05-24 16:00:43 +10:00
Daniel Karzel
1de907b176
Change default Monero mainnet node to xmr.to
It appears to be more stable.
Encountered issues with the previous setup, `monero-wallet-rpc` logs:

```
2021-05-24 04:23:54.852	E !r. THROW EXCEPTION: tools::error::no_connection_to_daemon
2021-05-24 04:23:54.857	E Exception at while refreshing, what=no connection to daemon
```
2021-05-24 14:44:44 +10:00
bors[bot]
ded9ea1b79
Merge #525
525: Bitcoin transaction published state r=da-kami a=da-kami

This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality and prevents re-publishing the transaction.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-24 02:55:31 +00:00
bors[bot]
284733d359
Merge #522
522: Add support for arm architecture to Swap CLI r=da-kami a=bonomat

Tested locally on my RPI4

Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
2021-05-24 01:58:57 +00:00
Daniel Karzel
01af9a5676
Bitcoin transaction published state
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
2021-05-24 10:53:14 +10:00
bors[bot]
db319d0a90
Merge #520
520: Cli json logging r=da-kami a=da-kami

Combining `--json` with the debug file logger was a pita, so I stopped and went for a simpler approach:

If `--json` is given we just log to terminal - **no** logfiles will be created in `{data-dir}/logs`. 
The `--debug` flag applies to `--json` (i.e. if not given it will just print json on info level). We could change that to automatically fallback to debug - could add a `required_if` dependency via strucopt/clap but I did not want to invest more time into thinking about this.

Note on extending binary functionality:
As discussed with @thomaseizinger recently, we will have to think about multiple binaries soon, i.e. a binary that focuses to be used to building on top of it (that always logs json) and potientially keeping a simple CLI that is more user friendly. This also goes towards more clearly separating the application code from re-usable protocol / network code. 


Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-21 09:49:10 +00:00
Philipp Hoenisch
21babf9678
Support armv7 architecture for monero-wallet-rpc.
This allows us to run swap cli on a raspberry pi 4.
2021-05-21 17:55:04 +10:00
Philipp Hoenisch
a445ddd2bd
Print download URL while downloading. 2021-05-21 17:54:03 +10:00
Philipp Hoenisch
f6c7410457
Upgrade monero-wallet-rpc to version 2.0 2021-05-21 17:53:43 +10:00
bors[bot]
ba33e1acc1
Merge #519
519: Avoid application error upon `--help` r=da-kami a=da-kami

Our `preview` release is currently broken because of this issue.

The way we use clap's `get_matches_from_safe` caused parsing errors upon `--help` and `--version` to be bubbled up to the application - which causes the application to exit with an error when running `--help` and `--version`.
This is solved by using `get_matches_from` instead of `get_matches_from_safe` which handles these known clap commands internally and exits early. 

Added smoke tests to CI so we catch such kind of problems in the future. Smoke testing by calling `--help` is cheap and should be OK in CI.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-21 05:43:24 +00:00
Daniel Karzel
fb9fb21c2b
CLI log statements to be more JSON friendly
Values to be logged as fields.
Upon starting a swap we print the swap-id as well.
2021-05-21 15:00:31 +10:00
Daniel Karzel
0187d9ef4f
Introduce --json flag for the CLI
When `--json` is used the CLI does not log to file, but only on the command line in json output.
2021-05-21 15:00:19 +10:00
bors[bot]
0032e820af
Merge #512
512: Bump libp2p from 0.37.1 to 0.38.0 r=thomaseizinger a=dependabot[bot]

Bumps [libp2p](https://github.com/libp2p/rust-libp2p) from 0.37.1 to 0.38.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/libp2p/rust-libp2p/releases">libp2p's releases</a>.</em></p>
<blockquote>
<h2>v0.38.0</h2>
<p>See individual <a href="https://github.com/libp2p/rust-libp2p/blob/HEAD/CHANGELOG.md">changelogs</a> for details.</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/libp2p/rust-libp2p/blob/master/CHANGELOG.md">libp2p's changelog</a>.</em></p>
<blockquote>
<h2>Version 0.38.0 [2021-05-17]</h2>
<ul>
<li>Update individual crates.
<ul>
<li><code>libp2p-core</code></li>
<li><code>libp2p-gossipsub</code></li>
<li><code>libp2p-noise</code></li>
<li><code>libp2p-pnet</code></li>
<li><code>libp2p-wasm-ext</code></li>
</ul>
</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="0b7ee3fa92"><code>0b7ee3f</code></a> *: Prepare v0.38.0 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2072">#2072</a>)</li>
<li><a href="c5bcada2c2"><code>c5bcada</code></a> protocols/gossipsub: Rework connection keep-alive (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2043">#2043</a>)</li>
<li><a href="9c5dd84099"><code>9c5dd84</code></a> build(deps): Update snow requirement from 0.7.1 to 0.8.0 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2068">#2068</a>)</li>
<li><a href="1fdac073fc"><code>1fdac07</code></a> build(deps): Bump actions-rs/toolchain from 1 to 1.0.7 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2069">#2069</a>)</li>
<li><a href="10fcc1c485"><code>10fcc1c</code></a> build(deps): Bump actions-rs/cargo from 1 to 1.0.3 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2070">#2070</a>)</li>
<li><a href="82c8b1a4b3"><code>82c8b1a</code></a> build(deps): Bump actions/checkout from 2 to 2.3.4 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2071">#2071</a>)</li>
<li><a href="43a8ad8fc2"><code>43a8ad8</code></a> protocols/relay/examples: Add client server instructions (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2060">#2060</a>)</li>
<li><a href="8988ac247e"><code>8988ac2</code></a> protocols/mdns: Fix discovered event emission. (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2065">#2065</a>)</li>
<li><a href="5c541a16f1"><code>5c541a1</code></a> build(deps): update salsa20 requirement from 0.7 to 0.8 (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2062">#2062</a>)</li>
<li><a href="d931f36428"><code>d931f36</code></a> transport/wasm-ext: Support dialing <code>Multiaddr</code> with <code>/p2p</code> protocol (<a href="https://github-redirect.dependabot.com/libp2p/rust-libp2p/issues/2058">#2058</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/libp2p/rust-libp2p/compare/v0.37.1...v0.38.0">compare view</a></li>
</ul>
</details>
<br />


[![Dependabot compatibility score](https://dependabot-badges.githubapp.com/badges/compatibility_score?dependency-name=libp2p&package-manager=cargo&previous-version=0.37.1&new-version=0.38.0)](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.

[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)

---

<details>
<summary>Dependabot commands and options</summary>
<br />

You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)


</details>

Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2021-05-21 01:48:01 +00:00
Daniel Karzel
9ff29ae491
CLI --help and --version are handled correctly
Since we introduced our own parsing function for command line arguments, we have to make sure that clap's behaviour is handled correctly.
Clap's `get_matches_from_safe` returns an error of a certain kind, of which `ErrorKind::HelpDisplayed` and `ErrorKind::VersionDisplayed ` have to be handled to properly print the help/version and exit the program.
The clap error includes the message, so we print help/version in main now and ensure the program exits with `0` afterwards.
2021-05-21 11:46:11 +10:00
Daniel Karzel
22bf48c287
Fix bug that breaks swap ID for logging 2021-05-20 14:52:36 +10:00
bors[bot]
bdb88f89cb
Merge #490
490: Mainnet switch r=da-kami a=da-kami

Fixes  #446
Fixes #360 
Fixes #506 
Fixes #478 

To be precise: It is actually a testnet switch, because I think mainnet should be default.

I took several assumptions on the way (e.g. network support, ...).

At this stage any feedback welcome :)

TODO:

- [ ] successful mainnet swap with this code base before merging :)

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-20 04:16:55 +00:00
Daniel Karzel
2db470f099
Bitcoin=2 Monero=10 default finality confirmations
It is currently not expected that ASB and CLI are used for swaps > 10_000$ equivalent to XMR/BTC, thus the finality confirmations were reduced to an equivalent of 20 mins of work (2 blocks for Bitcoin, 10 for Monero).
Monero enforces 10 unlocking blocks until the balance is spendable, so the finality confirmations cannot be set lower than 10.
2021-05-20 13:05:52 +10:00
Daniel Karzel
6694e4f4e0
Ensure that output of lock script is at tx-output index 0
We subscribe to transactions upon broadcast, where we use output index `0` for the subscription.
In order to ensure that this subscription is guaranteed to be for the locking script (and not a change output) we now ensure that the locking script output is always at index `0` of the outputs of the transaction.

We chose this solution because otherwise we would have to add more information to broadcasting a transaction.
This solution is less intrusive, because the order of transaction outputs should not have any side effects and ensuring index `0` makes the whole behaviour more deterministic.
2021-05-20 13:05:52 +10:00
Daniel Karzel
bae38a712f
Sync on interval instead of ping
Since we don't rely on long running subscriptions anymore we can remove the ping that was used to ensure a connection refresh.
2021-05-20 13:05:51 +10:00
Daniel Karzel
efb51820b1
Poll block headers for latest block on each iteration
The Electrum block-header subscription did not provide us with block headers, because upon the connection being closed by a node the subscription would end.
Re-newing the the subscription upon re-connect is not easily achievable, that's why we opted for a polling mode for now, where we start a block header subscription on every update iteration, that is only used once (when the subscription is made).
2021-05-20 13:05:51 +10:00
Daniel Karzel
f2e43ea565
Let testnet setup reflect mainnet
Our test values should reflect what we test on mainnet more closely to avoid bugs that are only observed when using mainnet settings.
2021-05-20 13:05:51 +10:00
Daniel Karzel
4dd696ebe1
Fix monero-wallet-rpc startup for mainnet CLI
There is no `--mainnet` flag.
Since we cannot just pass an empty string to `.arg()` we use the `.args()` method to pass nothing for mainnet and the respective flags for stagenet and testnet.
2021-05-20 13:05:51 +10:00
Daniel Karzel
1aaffb09f9
Refactor ASB test-/mainnet default dir init 2021-05-20 13:05:51 +10:00
Daniel Karzel
cfa85e0bad
Simplify ASB initial setup signature 2021-05-20 13:05:51 +10:00
Daniel Karzel
7f8af7926d
ASB config may specify finality confirmations
By default the finality confirmations of the network's `env::Config` will be applied and no finality confirmations will be persisted on disk in the config file.
It is however possible to set finality confirmations in the config file for bitcoin and monero for power users at their own risk.
If set the defaults will be overwritten with the parameter from the config file upon startup.
2021-05-20 13:05:51 +10:00
Daniel Karzel
af60d3bb54
Network check upon spot price request 2021-05-20 13:03:29 +10:00
Daniel Karzel
02974811ad
Activate mainnet for the ASB
To run the ASB on testnet, one actively has to provide the `--testnet` flag.
Mainnet and testnet data and config are separated into sub-folders, i.e. `{data/config-dir}/asb/testnet` and `{data-dir}/asb/mainnet`.
The initial setup is also per network. If (default) config for the network cannot be found the initial setup is triggered.
Startup includes network check to ensure the bitcoin/monero network in config file is the same as the one in the `env::Config`.

Note: Wallet initialization is done with the network set in the `env::Config`, the network saved in the config file is just to indicate what network the config file is for.
2021-05-20 12:58:39 +10:00
Daniel Karzel
9ac5b635d7
Introduce own de-/serializable monero::Network 2021-05-20 12:58:30 +10:00
Daniel Karzel
69cf12620d
Activate mainnet for the CLI
This includes testing CLI commandline args
Clap's `default_value_with` actually did not work on `Subcommand`s because the parent's flags were not picked up.
This was fixed by changing parameters dependent on testnet/mainnet to options.
This problem should have been detected by tests, that's why the command line parameter tests were finally (re-)added.

Thanks to @rishflab for some pre-work for this.
2021-05-20 12:57:58 +10:00
dependabot[bot]
6c206c7067
Bump libp2p from 0.37.1 to 0.38.0
Bumps [libp2p](https://github.com/libp2p/rust-libp2p) from 0.37.1 to 0.38.0.
- [Release notes](https://github.com/libp2p/rust-libp2p/releases)
- [Changelog](https://github.com/libp2p/rust-libp2p/blob/master/CHANGELOG.md)
- [Commits](https://github.com/libp2p/rust-libp2p/compare/v0.37.1...v0.38.0)

Signed-off-by: dependabot[bot] <support@github.com>
2021-05-18 06:33:38 +00:00
Thomas Eizinger
a3f436104f
Use tokio-tar from crates.io 2021-05-18 12:52:17 +10:00
Thomas Eizinger
75c5db53b2
Remove tokio-tar from workspace in favor of git dependency
Fixes #315.
Fixes #227.
2021-05-17 11:04:20 +10:00
Daniel Karzel
1cdc23de32
Explicitly specify monero-wallet-rpc deamon port
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
2021-05-14 09:50:52 +10:00
Daniel Karzel
343badbb4b
Remove duplication and cleanup
In the past we had problems with flags/parameter changes several times, where on instance was changed, buy another one was missed. This should mitigate this problem.
This patch introduces structs for all duplicated parameters and uses flatten to only have one point for changes.

Additionally removes all mentions of `alice` from the commands / variables. This code is on an application level and should not be concerned with swap protocol roles.
2021-05-14 09:50:50 +10:00
Daniel Karzel
4e1f3f82bd
Remove param from names
Did not add any value, more readable with just bitcoin and monero.
2021-05-14 09:50:49 +10:00
Daniel Karzel
657ac1e2e4
Bitcoin parameters that can be reused
Get rid of parameter duplication.
2021-05-14 09:50:47 +10:00
Daniel Karzel
a489564857
Remove unused Electrum HTTP default URL 2021-05-14 09:50:44 +10:00
Philipp Hoenisch
493545d07f
Improve logging for Swap Cli. 2021-05-12 16:31:32 +10:00
Philipp Hoenisch
4f45a26a83
Move check for max_giveable into the function. 2021-05-12 16:31:32 +10:00
Philipp Hoenisch
7fc5a47619
Add checks to max_giveable amount.
We need to check two things:
- balance to be higher than dust amount (546).
- balance to be higher than min-relay fee.

Additionally, the tx_builder might fail if not enough funds are in the wallet to pay for the overall transaction fees.
2021-05-12 16:31:32 +10:00
Philipp Hoenisch
26e0383e17
Apply suggestions from code review
Co-authored-by: Daniel Karzel <daniel.karzel@coblox.tech>
2021-05-11 16:06:44 +10:00
Philipp Hoenisch
fc0cceb180
Toggle json logs using commandline flag. 2021-05-11 15:28:25 +10:00
Philipp Hoenisch
316f95c65b
Always log whole causality chain for errors. 2021-05-11 15:27:53 +10:00
Philipp Hoenisch
c011e95062
Improve logging by adding details as fields instead of into the msg. 2021-05-11 15:27:53 +10:00
Philipp Hoenisch
1706b36800
Log exchange rate at each state. 2021-05-11 15:27:49 +10:00
bors[bot]
227c383d76
Merge #481
481: Min buy amount r=da-kami a=da-kami



Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-05-11 04:08:59 +00:00
Daniel Karzel
652aae9590
Introduce a minimum buy amount
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
2021-05-11 12:03:02 +10:00
Daniel Karzel
6d3cf0af91
Include too low balance into Alice's error 2021-05-11 12:03:02 +10:00
Daniel Karzel
1d62f4916c
Move max_buy and ask_spread into config
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.

The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.

```
...

[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
2021-05-11 12:02:57 +10:00
Philipp Hoenisch
330269a1e9
Update assert_weight test to account for a range up to 8 bytes.
Weights fluctuate because of the length of the signatures. Valid ecdsa signatures can have 68, 69, 70, 71, or 72 bytes. Since most of our transactions have 2 signatures the weight can be up to 8 bytes less than the static weight (4 bytes per signature).
2021-05-11 10:50:24 +10:00
Daniel Karzel
538b25a6dd
Only create config-directory on init success
We should only create the file if the user finished the initial setup correctly.
2021-05-11 10:32:25 +10:00
bors[bot]
d96e20a5b0
Merge #479
479: Use rust_decimal in estimate_fee function. r=bonomat a=bonomat

Follow-up PR from #466 

Co-authored-by: Philipp Hoenisch <philipp@hoenisch.at>
2021-05-10 23:00:12 +00:00
Philipp Hoenisch
b5073e3052
Use rust_decimal in estimate_fee function. 2021-05-10 10:53:43 +10:00
Daniel Karzel
23d9637a4b
Work in review comments 2021-05-07 16:21:02 +10:00
Daniel Karzel
daa572e5bf
Move recovery commands in dedicated module
Less clutter in the folder structure.
2021-05-07 16:21:02 +10:00
Daniel Karzel
4deb96a3c5
ASB manual recovery commands
Adds `cancel`, `refund`, `punish`, `redeem` and `safely-abort` commands to the ASB that can be used to trigger the specific scenario for the swap by ID.
2021-05-07 16:19:11 +10:00
Daniel Karzel
efcd39eeef
Add info messages to each subcommand
`asb --help` :

(...)

SUBCOMMANDS:
    balance         Prints the Bitcoin and Monero balance. Requires the monero-wallet-rpc to be running.
    help            Prints this message or the help of the given subcommand(s)
    history         Prints swap-id and the state of each swap ever made.
    start           Main command to run the ASB.
    withdraw-btc    Allows withdrawing BTC from the internal Bitcoin wallet.
2021-05-07 16:12:50 +10:00
Daniel Karzel
0c616c7437
Move loading the state into the function
In the production code it is a weird indirection that we load the state and then pass in the state and the database.
In the tests we have one additional load by doing it inside the command, but loading from the db is not expensive.
2021-05-07 16:12:49 +10:00
Daniel Karzel
89b3d07eba
Network protocol tests for spot_price behaviour
Each test spawns swarm for Alice and Bob that only contains the spot_price behaviours and uses a memory transport.
Tests cover happy path (i.e. expected price is returned) and error scenarios.
Implementation of `TestRate` on `LatestRate` allows testing rate fetch error and quote calculation error behaviour.

Thanks to @thomaseizinger for ramping up the test framework for comit-rs in the past!
2021-05-07 15:00:29 +10:00
Daniel Karzel
03a0dc73cd
Alice's spot_price Behaviour reports back Error
Instead of handling all errors on the inside spot_price errors are bubbled up (as `SwapRequestDeclined`).
This allows us to test both Alice's and Bob's behaviour for all scenarios.
2021-05-07 15:00:29 +10:00
Daniel Karzel
5aac76598d
Decouple ASB/CLI Errors from Error sent over wire
What goes over the wire should not be coupled to the errors being printed.
For the CLI and ASB we introduce a separate error enum that is used for logging.
When sending over the wire the errors are mapped to and from the `network::spot_price::Error`.

As part of Bob-specific spot_price code was moved from the network into bob.
Clearly separation of the network API from bob/alice.
2021-05-07 15:00:29 +10:00
Daniel Karzel
52f648e1de
Alice's spot price logic into dedicated behaviour
Move Alice's spot price logic into a dedicated network behaviour that handles all the logic.
The new behaviour encapsulates the complete state necessary for spot price request decision making.
The network behaviour cannot handle asynchronous calls, thus the balance is managed inside the spot price and has to updated regularly from the outside to ensure the spot price balance check has up to date data.
At the moment the balance is updated upon an incoming quote requests.

Code that is relevant for both ASB and CLI remains in the `network::spot_price` module (e.g. `network::spot_price::Error`).
2021-05-07 15:00:29 +10:00
Daniel Karzel
ea76ae5821
Return proper error to CLI for all expected scenarios
When a CLI requests a spot price have some errors that are expected, where we can provide a proper error message for the CLI:
- Balance of ASB too low
- Buy amount sent by CLI exceeds maximum buy amount accepted by ASB
- ASB is running in maintenance mode and does not accept incoming swap requests

All of these errors returns a proper error to the CLI and prints a warning in the ASB logs.
Any other unexpected error will result in closing the channel with the CLI and printing an error in the ASB logs.
2021-05-07 14:52:51 +10:00
Daniel Karzel
f6497778ed
Add resume-only mode for the ASB
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
2021-05-07 14:52:51 +10:00
Philipp Hoenisch
0090e3b48e
Typo 2021-05-07 10:35:22 +10:00
Philipp Hoenisch
59a55dcbdd
Remove todo for cleanup note. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
e93eeb81a2
Added some proptests. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
040cce1eb6
Format all the files 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
68ae47edf4
Log error message. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
aebdb063f1
Remove TODO 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
9fb1a43f29
Rename variable. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
cfdbacfbb5
Add comment.
The weight of our transactions can fluctuate by +-2 wu because our transactions have 2 signatures
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
e69a2c9111
Apply suggestions from code review
Co-authored-by: Daniel Karzel <daniel.karzel@coblox.tech>
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
dc8dd5af28
Add relative and absolute max transaction fee. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
dc6ab0fa52
Ensure that constant weights do not go out of sync with code. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
7fe9087bc2
Pull trait-bounds up one level for easier testing. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
77f6f11a7f
Pass address/fees into State0 instead of passing in the wallet. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
14c5a4f025
Add upper bound for bitcoin fees of 100,000 satoshi.
Fees are hard to compute and it is too easy to get wrong and lose a lot of money. Hence, a hardcoded maximum of 100,000 satoshi for a single transaction is in place.
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
46e0449b8e
Add config/argument to swap/asb to configure bitcoin tx fees. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
9e8b788aa9
Rename weight constants. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
ee90c228b4
Dynamically calculate fees using electrum's estimate_fee.
Electrum has an estimate-fee feature which takes as input the block you want a tx to be included.
The result is a recommendation of BTC/vbyte.
Using this recommendation and the knowledge about the size of our transactions we compute an appropriate fee.
The size of the transactions were taken from real transactions as published on bitcoin testnet.
Note: in reality these sizes might fluctuate a bit but not for much.
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
38540b4de5
Dynamically chose fee for TxCancel.
Bob chooses the fee for TxCancel because he is the one that cares.
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
1012e39527
Dynamically chose fee for TxRefund and TxPunish.
Alice chooses the fee for TxPunish because she is the one that cares.
Bob chooses the fee for TxRefund because he is the one that cares.

Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
d5c1b6693e
Dynamically chose fee for TxRedeem.
Alice chooses the fee for TxRedeem because she is the one that cares. Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
2021-05-07 10:24:41 +10:00
Philipp Hoenisch
002e7b38c3
Define TX_FEE within test files only. 2021-05-07 10:24:41 +10:00
Philipp Hoenisch
1db7586632
Increase timeout sending/receiving protocol messages. 2021-05-04 15:38:55 +10:00
bors[bot]
e7785d2c83
Merge #434
434: Introduce monero-wallet crate r=thomaseizinger a=thomaseizinger

This PR:

1. ~Introduce a crate for the epee binary serialization as a serde format~: Released here: https://github.com/comit-network/monero-epee-bin-serde
2. Extends the MoneroRPC client with two binary calls
3. Introduces a `monero-wallet` crate that for now just provides functionality for choosing random key offsets. Together with the the ability to produce bulletproofs and ring signatures, this should be enough for signing Monero transactions locally.

(1) and (2) are a prerequisite for (3).

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-05-03 03:21:18 +00:00
bors[bot]
cf1c448b7c
Merge #460
460: Different default directories for CLI and ASB r=da-kami a=da-kami

Fixes #437 

Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: `xmr-btc-swap-asb`
- CLI: `xmr-btc-swap-cli`

Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-04-30 04:24:29 +00:00
bors[bot]
1244b30094
Merge #459
459: Use dprint for formatting Cargo.toml files r=thomaseizinger a=thomaseizinger

Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.

Using dprint for toml files fixes this.

Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-30 01:19:40 +00:00
Daniel Karzel
69f7565746
!fixup Different default directories for CLI and ASB
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap/asb
- CLI: xmr-btc-swap/cli

Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
2021-04-30 11:03:13 +10:00
Thomas Eizinger
dd6bfd3bf4
Extend RPC client for monerod with binary requests 2021-04-30 10:28:45 +10:00
Daniel Karzel
b0ffeeab1d
Different default directories for CLI and ASB
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap-asb
- CLI: xmr-btc-swap-cli

Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
2021-04-29 19:02:16 +10:00
Daniel Karzel
08fecb8fe3
Peer check for incoming transfer proofs
Bob validates that incoming transfer proof messages are coming from the peer-id of Alice.
Currently Bob will ignore any transfer proof message that is not coming from the counterparty peer-id associated to the current swap in execution.
Once we add support for trying to save received transfer proofs for swaps that are currently not in execution we can also adapy allowing this for different counterparty peer-ids. This requires access to the database in Bob's event loop.
2021-04-29 18:28:14 +10:00
Daniel Karzel
3c2dfa830a
Peer check for incoming encrypted signatures
Alice validates that incoming encsig messages are coming from the peer-id that is associated with the swap.
Encsig message from a peer-id different to the one associated with the swap are ignored.
2021-04-29 18:24:45 +10:00
Thomas Eizinger
1820139786
Use dprint for formatting Cargo.toml files
Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.

Using dprint for toml files fixes this.

Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.
2021-04-29 17:35:02 +10:00
Philipp Hoenisch
ea6e2f8f09
Simplify to_address_string by implying more context on the structure. 2021-04-28 16:21:31 +10:00
Philipp Hoenisch
c8e6db24f8
Derive Tor secret key from seed. 2021-04-27 16:39:32 +10:00
Philipp Hoenisch
3a5395d7a5
Optimize torut features.
OnionV2 addresses are being deprecated and will be fully phased out on 15.10.2021: https://blog.torproject.org/v2-deprecation-timeline
2021-04-27 16:39:32 +10:00
Philipp Hoenisch
632293cf91
Add support for swapping through Tor.
This PR does a few things.
* It adds a TorTransport which either dials through Tor's socks5 proxy or via clearnet.
* It enables ASB to register hidden services for each network it is listening on. We assume that we only care about different ports and re-use the same onion-address for all of them. The ASB requires to have access to Tor's control port.
* It adds support to dial through a local Tor socks5 proxy. We assume that Tor is always available on localhost.  Swap cli only requires Tor to be running so that it can send messages via Tor's socks5 proxy.
* It adds a new e2e test which swaps through Tor. For this we assume that Tor is currently running on localhost. All other tests are running via clear net.
2021-04-27 14:51:41 +10:00
bors[bot]
e262345b4f
Merge #442
442: Minor cleanups towards implementing a Monero wallet for local signing r=thomaseizinger a=thomaseizinger

Extracted out of #434.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-27 02:16:27 +00:00
Thomas Eizinger
8d76607343
Refactor monero-harness containers
1. Split up image::Monero into Monerod and MoneroWalletRpc
2. Don't use `bash` to run the internal command. Instead we disable
the entrypoint script as per https://github.com/XMRto/monero#raw-commands
3. Remove the start up delay by listening for the correct log message.
To make this more resilient, we make the log level NOT configurable and
instead always log verbosely.
2021-04-26 18:12:57 +10:00
Thomas Eizinger
0970c2bc72
Initialize reqwest clients with verbose logging 2021-04-26 18:12:56 +10:00
Daniel Karzel
0f11ab051e
Print peer ID on debog when starting CLI
In order to add more context to the debug logs we print Bob's peer ID.
This allows identifying peer related logs on the ASB.
2021-04-26 13:00:37 +10:00
Thomas Eizinger
dc840e1562
Take wallet names by reference
We are always passing constants here. Make that more ergonomic.
2021-04-26 12:45:40 +10:00
Thomas Eizinger
22bdc08c83
Get rid of Bob's swap Builder
Doesn't serve any purpose. We are better of just having two
constructors.
2021-04-26 12:45:40 +10:00
Thomas Eizinger
e266fb07ef
Don't stutter 2021-04-26 12:45:39 +10:00
Thomas Eizinger
7adeaae12d
Be smart about how we import Config
By saying env::Config, we can save a line of code in the imports
and make it clearer, what kind of `Config` this is.
2021-04-26 12:45:39 +10:00
Thomas Eizinger
be5bf01ed4
Don't overqualify types that are already imported 2021-04-26 12:45:38 +10:00
Thomas Eizinger
325fcbdb8c
Introduce protocol::bob::behaviour to mimic structure from alice module 2021-04-26 12:45:37 +10:00
Thomas Eizinger
5b515d6fb2
Don't qualify with alice:: if we are within a module of Alice 2021-04-26 12:45:37 +10:00
Thomas Eizinger
a31d6febca
We don't need to import ourselves 2021-04-26 12:45:36 +10:00
Thomas Eizinger
881913ad9c
Re-order content of harness/mod.rs in a sane way
Most important things come first, remaining items are defined roughly
in the order they are used by the top level components.
2021-04-26 12:45:36 +10:00
Thomas Eizinger
6d06db3259
Use macro-based JSON-RPC client 2021-04-26 12:45:35 +10:00
dependabot[bot]
19483c5ead
Bump libp2p from 0.36.0 to 0.37.1
Bumps [libp2p](https://github.com/libp2p/rust-libp2p) from 0.36.0 to 0.37.1.
- [Release notes](https://github.com/libp2p/rust-libp2p/releases)
- [Changelog](https://github.com/libp2p/rust-libp2p/blob/master/CHANGELOG.md)
- [Commits](https://github.com/libp2p/rust-libp2p/compare/v0.36.0...v0.37.1)

Signed-off-by: dependabot[bot] <support@github.com>
2021-04-20 11:51:40 +10:00
Thomas Eizinger
39eea61538
Upgrade to bdk 0.6 2021-04-19 10:14:14 +10:00
COMIT Botty McBotface
43dc74cd9d Prepare release 0.5.0 2021-04-17 07:23:09 +00:00
Daniel Karzel
c1e993deb2
Json codec for quote protocol
A `RequestResponseCodec` for pull-based protocols where the response is encoded using JSON.
This was added to more properly express the behavior of the quote protocol, where the dialer
doesn't send any message and expects the listener to directly send the response.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-16 16:00:45 +10:00
Daniel Karzel
f70e2aa8d6
Listen on tcp and websocket transports
- Listen on both tcp and websockets as default
- Listening addresses in config as array
- Configure fallback transport using `or_transport` - if listening on a given address fails on WS, we fall back to TCP.
2021-04-16 16:00:38 +10:00
Thomas Eizinger
b417950f99
Improve error reporting of failed protocols
Instead of forwarding every error, we deliberately ignore certain
variants that are not worth being printed to the log. In particular,
this concerns "UnsupportedProtocols" and "ResponseOmission".

To make this less verbose we introduce a macro for mapping a
`RequestResponseEvent` to `{alice,bob}::OutEvent`. We use a macro
because those `OutEvent`s are different types and the only other
way of abstracting over them would be to introduce traits that we
implement on both of them.

To make the macro easier to use, we move all the `From` implementations
that convert between the protocol and the more high-level behaviour
into the actual protocol module.
2021-04-14 10:34:06 +10:00
Thomas Eizinger
f0f7288bb6
Introduce a redial::Behaviour
This behaviour makes Bob re-dial Alice with an exponential backoff as
soon as the connection is lost.
2021-04-14 10:07:14 +10:00
Thomas Eizinger
d4c10a1292
Introduce swarm::{alice,bob} function to construct a Swarm instance 2021-04-14 10:06:32 +10:00
bors[bot]
19766b9759
Merge #405
405: Concurrent swaps with same peer r=da-kami a=da-kami

Fixes #367 

- [x] Concurrent swaps with same peer

Not sure how much more time I should invest into this. We could just merge the current state and then do improvements on top...?

Improvements:

- [x] Think `// TODO: Remove unnecessary swap-id check` through and remove it
- [x] Add concurrent swap test, multiple swaps with same Bob
- [ ] Save swap messages without matching swap in execution in the database
- [ ] Assert the balances in the new concurrent swap tests
- [ ] ~~Add concurrent swap test, multiple swaps with different Bobs~~
- [ ] ~~Send swap-id in separate message, not on top of `Message0`~~

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-04-13 08:50:44 +00:00
Daniel Karzel
c976358c37
Multiple swaps with the same peer
- Swap-id is exchanged during execution setup. CLI (Bob) sends the swap-id to be used in his first message.
- Transfer poof and encryption signature messages include the swap-id so it can be properly associated with the correct swap.
- ASB: Encryption signatures are associated with swaps by swap-id, not peer-id.
- ASB: Transfer proofs are still associated to peer-ids (because they have to be sent to the respective peer), but the ASB can buffer multiple
- CLI: Incoming transfer proofs are checked for matching swap-id. If a transfer proof with a different swap-id than the current executing swap is received it will be ignored. We can change this to saving into the database.

Includes concurrent swap tests with the same Bob.

- One test that pauses and starts an additional swap after the transfer proof was received. Results in both swaps being redeemed after resuming the first swap.
- One test that pauses and starts an additional swap before the transfer proof is sent (just after BTC locked). Results in the second swap redeeming and the first swap being refunded (because the transfer proof on Bob's side is lost). Once we store transfer proofs that we receive during executing a different swap into the database both swaps should redeem.

Note that the monero harness was adapted to allow creating wallets with multiple outputs, which is needed for Alice.
2021-04-13 18:16:19 +10:00
Daniel Karzel
46f144ac67
Switch monero-rpc to debug in tests
To be able to see CI monero RPC errors.
2021-04-13 17:43:10 +10:00
bors[bot]
2f19222948
Merge #397
397: Always log at debug level to file r=rishflab a=rishflab

WILL SQUASH DOWN TO 3 COMMITS WHEN APPROVED!

Log at debug level to file

EnvFilter is applied globally. This means you cannot log at INFO level 
to the terminal and at DEBUG level to log files. To get a around this 
limitation I had to implement the layer trait on a new type and filter 
in the on_event() trait method. Each swap has its own log file denoted 
by its swap_id. The logger appends to the existing file when resuming a 
swap.

Closes #278 


I think the `DebugTerminalPritner` and `InfoTerminalPrinter` could be consolidated with some effort with some generics wizardry. It works for now and I think it can be done later. I wish in general there was a cleaner way to do this.
 

Co-authored-by: rishflab <rishflab@hotmail.com>
2021-04-09 00:19:56 +00:00
Daniel Karzel
489696ee08
Swap-id as file name for generated Monero wallet
Instead of using the private view-key as wallet filename we use the swap-id, to be able to identify which wallet is associated with which swap.
2021-04-08 19:23:54 +10:00