Move Alice's spot price logic into a dedicated network behaviour that handles all the logic.
The new behaviour encapsulates the complete state necessary for spot price request decision making.
The network behaviour cannot handle asynchronous calls, thus the balance is managed inside the spot price and has to updated regularly from the outside to ensure the spot price balance check has up to date data.
At the moment the balance is updated upon an incoming quote requests.
Code that is relevant for both ASB and CLI remains in the `network::spot_price` module (e.g. `network::spot_price::Error`).
When a CLI requests a spot price have some errors that are expected, where we can provide a proper error message for the CLI:
- Balance of ASB too low
- Buy amount sent by CLI exceeds maximum buy amount accepted by ASB
- ASB is running in maintenance mode and does not accept incoming swap requests
All of these errors returns a proper error to the CLI and prints a warning in the ASB logs.
Any other unexpected error will result in closing the channel with the CLI and printing an error in the ASB logs.
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
Fees are hard to compute and it is too easy to get wrong and lose a lot of money. Hence, a hardcoded maximum of 100,000 satoshi for a single transaction is in place.
Electrum has an estimate-fee feature which takes as input the block you want a tx to be included.
The result is a recommendation of BTC/vbyte.
Using this recommendation and the knowledge about the size of our transactions we compute an appropriate fee.
The size of the transactions were taken from real transactions as published on bitcoin testnet.
Note: in reality these sizes might fluctuate a bit but not for much.
Alice chooses the fee for TxPunish because she is the one that cares.
Bob chooses the fee for TxRefund because he is the one that cares.
Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
Alice chooses the fee for TxRedeem because she is the one that cares. Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
434: Introduce monero-wallet crate r=thomaseizinger a=thomaseizinger
This PR:
1. ~Introduce a crate for the epee binary serialization as a serde format~: Released here: https://github.com/comit-network/monero-epee-bin-serde
2. Extends the MoneroRPC client with two binary calls
3. Introduces a `monero-wallet` crate that for now just provides functionality for choosing random key offsets. Together with the the ability to produce bulletproofs and ring signatures, this should be enough for signing Monero transactions locally.
(1) and (2) are a prerequisite for (3).
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
460: Different default directories for CLI and ASB r=da-kami a=da-kami
Fixes#437
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: `xmr-btc-swap-asb`
- CLI: `xmr-btc-swap-cli`
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Co-authored-by: Daniel Karzel <daniel@comit.network>
459: Use dprint for formatting Cargo.toml files r=thomaseizinger a=thomaseizinger
Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.
Using dprint for toml files fixes this.
Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap/asb
- CLI: xmr-btc-swap/cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap-asb
- CLI: xmr-btc-swap-cli
Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
Bob validates that incoming transfer proof messages are coming from the peer-id of Alice.
Currently Bob will ignore any transfer proof message that is not coming from the counterparty peer-id associated to the current swap in execution.
Once we add support for trying to save received transfer proofs for swaps that are currently not in execution we can also adapy allowing this for different counterparty peer-ids. This requires access to the database in Bob's event loop.
Alice validates that incoming encsig messages are coming from the peer-id that is associated with the swap.
Encsig message from a peer-id different to the one associated with the swap are ignored.
Invoking cargo tomlfmt on all files is a PITA and as we can see from
the CI scripts, it is often forgotten to as new crates are added to
the workspace.
Using dprint for toml files fixes this.
Unfortunately, we can't use dprint for Rust code yet because there
hasn't been a release of rustfmt in quite a while but we are already
using features from a newer rustfmt via rustup.
This PR does a few things.
* It adds a TorTransport which either dials through Tor's socks5 proxy or via clearnet.
* It enables ASB to register hidden services for each network it is listening on. We assume that we only care about different ports and re-use the same onion-address for all of them. The ASB requires to have access to Tor's control port.
* It adds support to dial through a local Tor socks5 proxy. We assume that Tor is always available on localhost. Swap cli only requires Tor to be running so that it can send messages via Tor's socks5 proxy.
* It adds a new e2e test which swaps through Tor. For this we assume that Tor is currently running on localhost. All other tests are running via clear net.
442: Minor cleanups towards implementing a Monero wallet for local signing r=thomaseizinger a=thomaseizinger
Extracted out of #434.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
1. Split up image::Monero into Monerod and MoneroWalletRpc
2. Don't use `bash` to run the internal command. Instead we disable
the entrypoint script as per https://github.com/XMRto/monero#raw-commands
3. Remove the start up delay by listening for the correct log message.
To make this more resilient, we make the log level NOT configurable and
instead always log verbosely.
A `RequestResponseCodec` for pull-based protocols where the response is encoded using JSON.
This was added to more properly express the behavior of the quote protocol, where the dialer
doesn't send any message and expects the listener to directly send the response.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
- Listen on both tcp and websockets as default
- Listening addresses in config as array
- Configure fallback transport using `or_transport` - if listening on a given address fails on WS, we fall back to TCP.
Instead of forwarding every error, we deliberately ignore certain
variants that are not worth being printed to the log. In particular,
this concerns "UnsupportedProtocols" and "ResponseOmission".
To make this less verbose we introduce a macro for mapping a
`RequestResponseEvent` to `{alice,bob}::OutEvent`. We use a macro
because those `OutEvent`s are different types and the only other
way of abstracting over them would be to introduce traits that we
implement on both of them.
To make the macro easier to use, we move all the `From` implementations
that convert between the protocol and the more high-level behaviour
into the actual protocol module.
405: Concurrent swaps with same peer r=da-kami a=da-kami
Fixes#367
- [x] Concurrent swaps with same peer
Not sure how much more time I should invest into this. We could just merge the current state and then do improvements on top...?
Improvements:
- [x] Think `// TODO: Remove unnecessary swap-id check` through and remove it
- [x] Add concurrent swap test, multiple swaps with same Bob
- [ ] Save swap messages without matching swap in execution in the database
- [ ] Assert the balances in the new concurrent swap tests
- [ ] ~~Add concurrent swap test, multiple swaps with different Bobs~~
- [ ] ~~Send swap-id in separate message, not on top of `Message0`~~
Co-authored-by: Daniel Karzel <daniel@comit.network>
- Swap-id is exchanged during execution setup. CLI (Bob) sends the swap-id to be used in his first message.
- Transfer poof and encryption signature messages include the swap-id so it can be properly associated with the correct swap.
- ASB: Encryption signatures are associated with swaps by swap-id, not peer-id.
- ASB: Transfer proofs are still associated to peer-ids (because they have to be sent to the respective peer), but the ASB can buffer multiple
- CLI: Incoming transfer proofs are checked for matching swap-id. If a transfer proof with a different swap-id than the current executing swap is received it will be ignored. We can change this to saving into the database.
Includes concurrent swap tests with the same Bob.
- One test that pauses and starts an additional swap after the transfer proof was received. Results in both swaps being redeemed after resuming the first swap.
- One test that pauses and starts an additional swap before the transfer proof is sent (just after BTC locked). Results in the second swap redeeming and the first swap being refunded (because the transfer proof on Bob's side is lost). Once we store transfer proofs that we receive during executing a different swap into the database both swaps should redeem.
Note that the monero harness was adapted to allow creating wallets with multiple outputs, which is needed for Alice.
397: Always log at debug level to file r=rishflab a=rishflab
WILL SQUASH DOWN TO 3 COMMITS WHEN APPROVED!
Log at debug level to file
EnvFilter is applied globally. This means you cannot log at INFO level
to the terminal and at DEBUG level to log files. To get a around this
limitation I had to implement the layer trait on a new type and filter
in the on_event() trait method. Each swap has its own log file denoted
by its swap_id. The logger appends to the existing file when resuming a
swap.
Closes#278
I think the `DebugTerminalPritner` and `InfoTerminalPrinter` could be consolidated with some effort with some generics wizardry. It works for now and I think it can be done later. I wish in general there was a cleaner way to do this.
Co-authored-by: rishflab <rishflab@hotmail.com>
EnvFilter is applied globally. This means you cannot log at INFO level
to the terminal and at DEBUG level to log files. To get a around this
limitation I had to implement the layer trait on a new type and filter
in the on_event() trait method. Each swap has its own log file denoted
by its swap_id. The logger appends to the existing file when resuming a
swap.
Closes#278
396: Remove default connection details from CLI r=thomaseizinger a=rishflab
Connecting buyers to us by default is not consistent with our vision of
a decentralised network of sellers.
Closes#395
Co-authored-by: rishflab <rishflab@hotmail.com>
387: Improve the resilience of the network layer r=thomaseizinger a=thomaseizinger
We improve the resilience in two ways:
1. Use a timeout on Bob's side for the execution-setup.
2. Use the `bmrng` library to model the communication between Alice and Bob.
See commit messages for details.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Edge cases of UTXOs where value < fee cause the BDK's `coin_select` calculation to panic.
This issue was fixed upstream thus we point the BDK dependency against the commit of the merged fix.
It might very well be that the cancel transaction is already published.
If that is the case, there is no point in failing the command. We simply
transition to cancel and exit normally.
The reason this comes up now is because Alice now properly waits for
the cancel timelock as well and publishes the cancel transaction first.
Ultimately, she should not do that because there is no benefit to her
unless she can also publish the punish transaction.
Sending the transfer proof might never resolve because Bob doesn't
come back online. In that case, we need to make sure we bail out
as soon as the timelock expires.
We use the "precondition" feature of the `tokio::select!` macro to
avoid polling certain futures. In particular, we skip polling all
futures that - when resolved - require us to send a message to Alice.
This allows us to delay the ACKing of the encrypted signature up until
the swap has actually requested it.
Similarly, it allows us to wait for the ACK of the transfer proof within
the swap before continuing.
bmrng is a library providing a request-response channel that allows
the receiving end of the channel to send a response back to the sender.
This allows us to more accurately implement the functions on the
`EventLoopHandle`. In particular, we now _wait_ for the ACK of specific
messages from the other party before resolving the future.
For example, when sending the encrypted signature, the async function
on the `EventLoopHandle` does not resolve until we received the ACK
from the other party.
We also delete the `Channels` abstraction in favor of directly creating
bmrng channels. This allows us to directly control the channel buffer
which we set to 1 because we don't need more than that on Bob's side.
There is no point in first checking for the expired timelocks and
then constructing a `select!` that also watches for the timelock to
expiry.
We can simply only have the select! invocation to achieve the same
effect. In case the timelock is already expired, this future will
resolve immediately.
Normally, the polling order of `select!` is pseudo-random. We
configure it to be _biased_ here to make sure the futures are polled
in order.
The execution setup is our only libp2p protocol that doesn't have
a timeout built-in. Hence, if anything fails on Alice's side, we
would wait here forever.
Wrapping the future in a timeout ensures that we fail eventually
if this protocol doesn't succeed.
We don't need to hide the fields of this Behaviour as the only reason
for why this struct exists is because libp2p forces us to compose our
NetworkBehaviours into a new struct.
This allows loading the seller-peer-id from the database upon resuming a swap.
Thus, the parameters `--seller-peer-id` is removed for the `resume` command.
Other than the peer-id the multi address of a seller can change and thus is
still a parameter. This parameter might become optional once we add DHT support.
Awaiting the confirmations in an earlier state can cause trouble with resuming
swaps with short cancel expiries (test scenarios).
Since it is the responsibility of the refund state to ensure that the XMR can
be sweeped, we now ensure that the lock transaction has 10 confirmations before
refunding the XMR using generate_from_keys.
Sending the transfer transaction in a distinct state helps ensuring
that we do not send the Monero lock transaction twice in a restart
scenario.
Waiting for the first transaction confirmation in a separate state
helps ensuring that we send the transfer proof in a restart scenario.
Once we resume unfinished swaps upon startup we have to ensure that
it is safe for Alice to act.
If Bob has locked BTC it is only make sense for Alice to lock up the
XMR as long as no timelock has expired. Hence we abort if the BTC is
locked, but any timelock expired already.
389: Bump bdk-testutils from 0.3.0 to 0.4.0 r=thomaseizinger a=dependabot[bot]
Bumps [bdk-testutils](https://github.com/bitcoindevkit/bdk) from 0.3.0 to 0.4.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/releases">bdk-testutils's releases</a>.</em></p>
<blockquote>
<h2>v0.4.0</h2>
<p>The v0.4.0 release brings updated dependencies, more sanity checks and an overhauled API to build transactions.</p>
<p>You can find the full v0.4.0 changelog on GitHub.</p>
<p>As always, thanks to everybody who contributed to this release!</p>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md">bdk-testutils's changelog</a>.</em></p>
<blockquote>
<h2>[v0.5.0] - [v0.4.0]</h2>
<h3>Misc</h3>
<h4>Changed</h4>
<ul>
<li>Updated <code>electrum-client</code> to version <code>0.7</code></li>
</ul>
<h3>Wallet</h3>
<h4>Changed</h4>
<ul>
<li><code>FeeRate</code> constructors <code>from_sat_per_vb</code> and <code>default_min_relay_fee</code> are now <code>const</code> functions</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="e3f893dbd1"><code>e3f893d</code></a> Bump version to 0.4.0</li>
<li><a href="3f5513a2d6"><code>3f5513a</code></a> Update 'bdk-macros', 'bdk-testutils', 'bdk-testutils-macros' dep versions</li>
<li><a href="fcf5e971a6"><code>fcf5e97</code></a> Bump 'bdk-macros' version to 0.3.0</li>
<li><a href="cdf7b33104"><code>cdf7b33</code></a> Bump 'bdk-testutils' version to 0.3.0</li>
<li><a href="7bbff79d4b"><code>7bbff79</code></a> Bump 'bdk-testutils-macros' version to 0.3.0</li>
<li><a href="3a2b8bdb85"><code>3a2b8bd</code></a> Small CHANGELOG cleanup</li>
<li><a href="7843732e17"><code>7843732</code></a> [descriptor] Perform additional checks before using a descriptor</li>
<li><a href="6092c6e789"><code>6092c6e</code></a> Don't fix tokio minor version</li>
<li><a href="b61427c07b"><code>b61427c</code></a> [policy] Allow specifying a policy path for <code>Multisig</code></li>
<li><a href="fa2610538f"><code>fa26105</code></a> [policy] Remove the <code>TooManyItemsSelected</code> error</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.3.0...v0.4.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
In order for the re-construction of TxLock to be meaningful, we limit
`Message2` to the PSBT instead of the full struct. This is a breaking
change in the network layer.
The PSBT is valid if:
- It has at most two outputs (we allow a change output)
- One of the outputs pays the agreed upon amount to a shared output script
Resolves#260.
This allows us to construct instances of bitcoin::Wallet for test
purposes that use a different blockchain and database implementation.
We also parameterize the electrum-client to make it possible to
construct a bitcoin::Wallet for tests that doesn't have one. This
is necessary because the client validates the connection as it is
constructed and we don't want to provide an Electrum backend for
unit tests.
This allows us to remove all visibility modifiers from the message
fields because child modules (in this case {alice,bob}::state) can
always access private fields of structs.
It also moves the messages into a more natural place. Previously,
they were defined within the network layer even though they are
independent of the libp2p implementation.
To achieve this, we need to add some pure helpers to the state structs.
This has the added benefit that we can reduce the amount of code within
the swap function.
If TxLock does not confirm in a reasonable amount of time, Alice should
give up on the swap rather than waiting forever. Watching for TxLock in
the mempool is not required and it causes unnecessary complexity. What
if Alice does not see the transaction in mempool but it is already
confirmed? She will abort the swap for no reason.
Instead of watching for status changes directly on bitcoin::Wallet,
we return a Subscription object back to the caller. This subscription
object can be re-used multiple times.
Among other things, this now allows callers of `broadcast` to decide
on what to wait for given the returned Subscription object.
The new API is also more concise which allows us to remove some of
the functions on the actor states in favor of simple inline calls.
Co-authored-by: rishflab <rishflab@hotmail.com>
Sometimes, a single sync is not enough because we are still waiting
for the block to be mined.
We introduce an abstraction that loops on fetching the latest balance
with a certain timeout for asserting the balance.
By using `test_writer`, cargo can automatically scope the output
of the test to the relevant thread and will also only output it
if the test fails or is run with `--nocapture`.
This also formats `log` events more nicely. Instead of
```
Mar 29 09:46:16.775 INFO log: Found message after comparing 82 lines log.target="testcontainers::core::wait_for_message" log.module_path="testcontainers::core::wait_for_message" log.file="/home/thomas/.cargo/registry/src/github.com-1ecc6299db9ec823/testcontainers-0.12.0/src/core/wait_for_message.rs" log.line=35
```
We now have
```
Mar 29 09:57:15.860 INFO testcontainers::core::wait_for_message: Found message after comparing 81 lines
```
Our strategy of searching for a english string to determine if
monero_wallet_rpc is ready is not compatible with languages other than
english. Instead we assume the monero rpc is ready if it has stopped
writing to stdout. We make a json rpc request to confirm this. A better
solution would have been to configure the monero_wallet_rpc to always
output in english but there is not command line argument to configure
the language.
Closes#353.
359: Bump bdk from 0.4.0 to 0.5.0 r=thomaseizinger a=dependabot[bot]
Bumps [bdk](https://github.com/bitcoindevkit/bdk) from 0.4.0 to 0.5.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/bitcoindevkit/bdk/blob/master/CHANGELOG.md">bdk's changelog</a>.</em></p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="f7944e871b"><code>f7944e8</code></a> Bump version to 0.5.0</li>
<li><a href="2fea1761c1"><code>2fea176</code></a> Bump deps version</li>
<li><a href="fa27ae210f"><code>fa27ae2</code></a> Update version in lib.rs</li>
<li><a href="46fa41470e"><code>46fa414</code></a> Update CHANGELOG with the new release tag</li>
<li><a href="8ebe7f0ea5"><code>8ebe7f0</code></a> Merge commit 'refs/pull/308/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="eb85390846"><code>eb85390</code></a> Merge commit 'refs/pull/309/head' of github.com:bitcoindevkit/bdk into releas...</li>
<li><a href="dc83db273a"><code>dc83db2</code></a> better derivation path building</li>
<li><a href="201bd6ee02"><code>201bd6e</code></a> better derivation path building</li>
<li><a href="396ffb42f9"><code>396ffb4</code></a> handle descriptor xkey origin</li>
<li><a href="9cf62ce874"><code>9cf62ce</code></a> [ci] Manually install libclang-common-10-dev to 'check-wasm' job</li>
<li>Additional commits viewable in <a href="https://github.com/bitcoindevkit/bdk/compare/v0.4.0...v0.5.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
370: No Bitcoin deposit for Alice r=da-kami a=da-kami
The message to deposit Bitcoin only applies to Bob, not Alice.
Alice does not require any initial Bitcoin.
Co-authored-by: Daniel Karzel <daniel@comit.network>
The request-response behaviour that is used for sending the transfer
proof actually has a functionality for buffering a message if we
are currently not connected. However, the request-response behaviour
also emits a dial attempt and **drops** all buffered messages if this
dial attempt fails. For us, the dial attempt will very likely always
fail because Bob is very likely behind NAT and we have to wait for
him to reconnect to us.
To mitigate this, we build our own buffer within the EventLoop and
send transfer proofs as soon as we are connected again.
Resolves#348.
The swap should not be concerned with connection handling. This is
the responsibility of the overall application.
All but the execution-setup NetworkBehaviour are `request-response`
behaviours. These have built-in functionality to automatically emit
a dial attempt in case we are not connected at the time we want to
send a message. We remove all of the manual dialling code from the
swap in favor of this behaviour.
Additionally, we make sure to establish a connection as soon as the
EventLoop gets started. In case we ever loose the connection to Alice,
we try to re-establish it.
Decomposing a RequestResponseEvent is quite verbose. We can introduce
a helper function that does the matching for us and delegates to
specific `From` implementations for the protocol specific bits.
339: Bump dependency versions r=thomaseizinger a=thomaseizinger
Otherwise it will take a long time for dependabot to update all of
these.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
351: Show the actual BTC amount and fee to be swapped r=da-kami a=da-kami
We got user feedback, that it is confusing that the amount "found" in the wallet does not match the amount actually being swapped, thus with this PR we explicitly display the amount swapped and fees.
Co-authored-by: Daniel Karzel <daniel@comit.network>
319: Alice sweeps refunded funds into default wallet r=da-kami a=da-kami
Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
Co-authored-by: Daniel Karzel <daniel@comit.network>
If we enter a punish scenario we can be sure the punish timelock is expired.
Thus, we must be able to punish unless Bob published the refund transaction.
There is no benefit in racing punish against refund here, because we cannot recover from a punish tx failure anyway.
The logic was changed to:
Try to broadcast punish tx and await finality.
If either punish broadcasting of finality fails, try to fetch the refund transaction.
If it is available extract Bob's Monero key part and transition to refund.
If refund tx is not available fail without a status update.
Note that we do not distinguish different errors upon failure of punish, because
we cannot recover anyway. If we fail to retrieve Bob's refund tx, we just exit without
a status update so punish can be retried by resuming the swap.
Since Alice's refund scenario starts with generating the temporary wallet
from keys to claim the XMR which results in Alice' unloading the wallet.
Alice then loads her original wallet to be able to handle more swaps.
Since Alice is in the role of the long running daemon handling concurrent
swaps, the operation to close, claim and re-open her default wallet must
be atomic.
This PR adds an additional step, that sweeps all the refunded XMR back into
the default wallet. In order to ensure that this is possible, Alice has to
ensure that the locked XMR got enough confirmations.
These changes allow us to assert Alice's balance after refunding.
To achieve this, we decompose `watch_for_locked_xmr` into two parts:
1. A non-self-consuming function to construct a `WatchRequest`
2. A state transition that can now consume `self` again because
it is only called once within the whole select! expression.
Ideally, we would move more logic onto this state transition (like
comparing the actual amounts and fail the transition if it is not
valid). Doing so would have an unfortunate side-effect: We would
always wait for the full confirmations before checking whether or
not we actually receive enough XMR.
This allows us to have state transitions that consume self.
Instead of calling this function in all the branches, we can simply
make the whole match statement evaluate to the new state and perform
this functionality at the very end.
This allows us to move critical crypto logic onto `State3` which
holds all the necessary data which consequently allows us to get
rid of `lock_xmr` altogether by inlining it into the swap function.
The reduced indirection improves readability.
327: Bump actions/setup-python from v1 to v2.2.1 r=thomaseizinger a=dependabot[bot]
Bumps [actions/setup-python](https://github.com/actions/setup-python) from v1 to v2.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/actions/setup-python/releases">actions/setup-python's releases</a>.</em></p>
<blockquote>
<h2>v2.2.1</h2>
<ul>
<li>Fix PyPy3 issues with Windows</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="3105fb18c0"><code>3105fb1</code></a> fix is_windows (<a href="https://github.com/actions/setup-python/issues/172">#172</a>)</li>
<li><a href="8c5ea631b2"><code>8c5ea63</code></a> Adding support for more PyPy versions and installing them on-flight (<a href="https://github.com/actions/setup-python/issues/168">#168</a>)</li>
<li><a href="2831efe49a"><code>2831efe</code></a> Improve find-python to add "Scripts" folder to PATH on Windows machines (<a href="https://github.com/actions/setup-python/issues/169">#169</a>)</li>
<li><a href="3b3f2de1b1"><code>3b3f2de</code></a> update pypy3 to point to 3.6 (<a href="https://github.com/actions/setup-python/issues/164">#164</a>)</li>
<li><a href="723e46dad7"><code>723e46d</code></a> CODEOWNERS needs the org name for teams</li>
<li><a href="195f5c388b"><code>195f5c3</code></a> Create CODEOWNERS</li>
<li><a href="41b7212b16"><code>41b7212</code></a> Update README.md (<a href="https://github.com/actions/setup-python/issues/145">#145</a>)</li>
<li><a href="878156f1de"><code>878156f</code></a> Inject LD_LIBRARY_PATH library path into Python manifest install and setup (#...</li>
<li><a href="c181ffa198"><code>c181ffa</code></a> Add Environment Files (<a href="https://github.com/actions/setup-python/issues/138">#138</a>)</li>
<li><a href="1ce870e10f"><code>1ce870e</code></a> Fix links in documentation (<a href="https://github.com/actions/setup-python/issues/135">#135</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/actions/setup-python/compare/v1...3105fb18c05ddd93efea5f9e0bef7a03a6e9e7df">compare view</a></li>
</ul>
</details>
<br />
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
330: Bump dialoguer from 0.7.1 to 0.8.0 r=thomaseizinger a=dependabot[bot]
Bumps [dialoguer](https://github.com/mitsuhiko/dialoguer) from 0.7.1 to 0.8.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/mitsuhiko/dialoguer/blob/master/CHANGELOG.md">dialoguer's changelog</a>.</em></p>
<blockquote>
<h2>0.8.0</h2>
<h3>Enhancements</h3>
<ul>
<li><code>Input::validate_with</code> can take a <code>FnMut</code> (allowing multiple references)</li>
</ul>
<h3>Breaking</h3>
<ul>
<li><code>Input::interact*</code> methods take <code>&mut self</code> instead of <code>&self</code></li>
</ul>
<h2>0.7.0</h2>
<h3>Enhancements</h3>
<ul>
<li>Added <code>wait_for_newline</code> to <code>Confirm</code></li>
<li>More secure password prompt</li>
<li>More documentation</li>
<li>Added <code>interact_text</code> method for input prompt</li>
<li>Added <code>inline_selections</code> to <code>ColorfulTheme</code></li>
</ul>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::CustomPromptCharacterTheme</code></li>
<li><code>Input</code> validators now take the input type <code>T</code> as arg</li>
<li><code>Confirm</code> has no <code>default</code> value by default now</li>
</ul>
<h2>0.6.2</h2>
<h3>Enhancements</h3>
<ul>
<li>Updating some docs</li>
</ul>
<h2>0.6.1</h2>
<h3>Bugfixes</h3>
<ul>
<li><code>theme::ColorfulTheme</code> default styles are for stderr</li>
</ul>
<h2>0.6.0</h2>
<h3>Breaking</h3>
<ul>
<li>Removed <code>theme::SelectionStyle</code> enum</li>
<li>Allowed more customization for <code>theme::Theme</code> trait by changing methods</li>
<li>Allowed more customization for <code>theme::ColorfulTheme</code> by changing members</li>
<li>Renamed prompt <code>Confirmation</code> to <code>Confirm</code></li>
<li>Renamed prompt <code>PasswordInput</code> to <code>Password</code></li>
<li>Renamed prompt <code>OrderList</code> to <code>Sort</code></li>
<li>Renamed prompt <code>Checkboxes</code> to <code>MultiSelect</code></li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="2c3fe6b646"><code>2c3fe6b</code></a> Release 0.8.0</li>
<li><a href="64f5f9c6f5"><code>64f5f9c</code></a> Allow confirm with no choice (<a href="https://github.com/mitsuhiko/dialoguer/issues/101">#101</a>)</li>
<li><a href="0250090f95"><code>0250090</code></a> Update some docs in confirm prompt</li>
<li><a href="a76fb72c54"><code>a76fb72</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/102">#102</a> from spenserblack/typo-fix</li>
<li><a href="3dd93bb75a"><code>3dd93bb</code></a> Fix typo: ereased -> erased</li>
<li><a href="7ea6275caa"><code>7ea6275</code></a> Update CI for i686 ubuntu</li>
<li><a href="af664807da"><code>af66480</code></a> Allow FnMut for validate (<a href="https://github.com/mitsuhiko/dialoguer/issues/96">#96</a>)</li>
<li><a href="2b5722d0f5"><code>2b5722d</code></a> Update README.md</li>
<li><a href="2df3a705eb"><code>2df3a70</code></a> Update ci.yml</li>
<li><a href="8cebf522b3"><code>8cebf52</code></a> Merge pull request <a href="https://github.com/mitsuhiko/dialoguer/issues/94">#94</a> from mitsuhiko/remove-travis</li>
<li>Additional commits viewable in <a href="https://github.com/mitsuhiko/dialoguer/compare/0.7.1...0.8.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
331: Bump tokio from 1.0.2 to 1.3.0 r=thomaseizinger a=dependabot[bot]
Bumps [tokio](https://github.com/tokio-rs/tokio) from 1.0.2 to 1.3.0.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/tokio-rs/tokio/releases">tokio's releases</a>.</em></p>
<blockquote>
<h2>Tokio v1.3.0</h2>
<h3>Added</h3>
<ul>
<li>coop: expose an <code>unconstrained()</code> opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li>net: add <code>into_std</code> for net types without it (<a href="https://github.com/tokio-rs/tokio/issues/3509">#3509</a>)</li>
<li>sync: add <code>same_channel</code> method to <code>mpsc::Sender</code> (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li>sync: add <code>{try_,}acquire_many_owned</code> to <code>Semaphore</code> (<a href="https://github.com/tokio-rs/tokio/issues/3535">#3535</a>)</li>
<li>sync: add back <code>RwLockWriteGuard::map</code> and <code>RwLockWriteGuard::try_map</code> (<a href="https://github.com/tokio-rs/tokio/issues/3348">#3348</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>sync: allow <code>oneshot::Receiver::close</code> after successful <code>try_recv</code> (<a href="https://github.com/tokio-rs/tokio/issues/3552">#3552</a>)</li>
<li>time: do not panic on <code>timeout(Duration::MAX)</code> (<a href="https://github.com/tokio-rs/tokio/issues/3551">#3551</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>doc: doc aliases for pre-1.0 function names (<a href="https://github.com/tokio-rs/tokio/issues/3523">#3523</a>)</li>
<li>io: fix typos (<a href="https://github.com/tokio-rs/tokio/issues/3541">#3541</a>)</li>
<li>io: note the EOF behaviour of <code>read_until</code> (<a href="https://github.com/tokio-rs/tokio/issues/3536">#3536</a>)</li>
<li>io: update <code>AsyncRead::poll_read</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3557">#3557</a>)</li>
<li>net: update <code>UdpSocket</code> splitting doc (<a href="https://github.com/tokio-rs/tokio/issues/3517">#3517</a>)</li>
<li>runtime: add link to <code>LocalSet</code> on <code>new_current_thread</code> (<a href="https://github.com/tokio-rs/tokio/issues/3508">#3508</a>)</li>
<li>runtime: update documentation of thread limits (<a href="https://github.com/tokio-rs/tokio/issues/3527">#3527</a>)</li>
<li>sync: do not recommend <code>join_all</code> for <code>Barrier</code> (<a href="https://github.com/tokio-rs/tokio/issues/3514">#3514</a>)</li>
<li>sync: documentation for <code>oneshot</code> (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li>sync: rename <code>notify</code> to <code>notify_one</code> (<a href="https://github.com/tokio-rs/tokio/issues/3526">#3526</a>)</li>
<li>time: fix typo in <code>Sleep</code> doc (<a href="https://github.com/tokio-rs/tokio/issues/3515">#3515</a>)</li>
<li>time: sync <code>interval.rs</code> and <code>time/mod.rs</code> docs (<a href="https://github.com/tokio-rs/tokio/issues/3533">#3533</a>)</li>
</ul>
<h2>Tokio v1.2.0</h2>
<h3>Added</h3>
<ul>
<li>signal: make <code>Signal::poll_recv</code> method public (<a href="https://github.com/tokio-rs/tokio/issues/3383">#3383</a>)</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>time: make <code>test-util</code> paused time fully deterministic (<a href="https://github.com/tokio-rs/tokio/issues/3492">#3492</a>)</li>
</ul>
<h3>Documented</h3>
<ul>
<li>sync: link to new broadcast and watch wrappers (<a href="https://github.com/tokio-rs/tokio/issues/3504">#3504</a>)</li>
</ul>
<h2>Tokio v1.1.1</h2>
<p>Forward ports 1.0.3 fix.</p>
<h3>Fixed</h3>
<ul>
<li>io: memory leak during shutdown (<a href="https://github.com/tokio-rs/tokio/issues/3477">#3477</a>).</li>
</ul>
<h2>Tokio v1.1.0</h2>
<h3>Added</h3>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="d0e4dd1d7b"><code>d0e4dd1</code></a> chore: prepare Tokio v1.3.0 (<a href="https://github.com/tokio-rs/tokio/issues/3597">#3597</a>)</li>
<li><a href="872bc09e83"><code>872bc09</code></a> examples: update chat example (<a href="https://github.com/tokio-rs/tokio/issues/3587">#3587</a>)</li>
<li><a href="db1d90453c"><code>db1d904</code></a> util: fuse PollSemaphore (<a href="https://github.com/tokio-rs/tokio/issues/3578">#3578</a>)</li>
<li><a href="05eeea570e"><code>05eeea5</code></a> coop: expose an unconstrained() opt-out (<a href="https://github.com/tokio-rs/tokio/issues/3547">#3547</a>)</li>
<li><a href="f70b9b84f7"><code>f70b9b8</code></a> sync: documenation for oneshot (<a href="https://github.com/tokio-rs/tokio/issues/3592">#3592</a>)</li>
<li><a href="704de8c01b"><code>704de8c</code></a> stream: remove duplicate <code>doc(test(..))</code> & <code>cfg_attr</code> declarations (<a href="https://github.com/tokio-rs/tokio/issues/3571">#3571</a>)</li>
<li><a href="47be928444"><code>47be928</code></a> sync: yield initial value in WatchStream (<a href="https://github.com/tokio-rs/tokio/issues/3576">#3576</a>)</li>
<li><a href="e06b257e09"><code>e06b257</code></a> sync: add same_channel method to mpsc Senders (<a href="https://github.com/tokio-rs/tokio/issues/3532">#3532</a>)</li>
<li><a href="0867a6fc03"><code>0867a6f</code></a> util: add pollable mpsc::Sender (<a href="https://github.com/tokio-rs/tokio/issues/3490">#3490</a>)</li>
<li><a href="0d838bf5ad"><code>0d838bf</code></a> io: fix link to std src in util (<a href="https://github.com/tokio-rs/tokio/issues/3568">#3568</a>)</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tokio/compare/tokio-1.0.2...tokio-1.3.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
332: Bump base64 from 0.12.3 to 0.13.0 r=thomaseizinger a=dependabot[bot]
Bumps [base64](https://github.com/marshallpierce/rust-base64) from 0.12.3 to 0.13.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/marshallpierce/rust-base64/blob/master/RELEASE-NOTES.md">base64's changelog</a>.</em></p>
<blockquote>
<h1>0.13.0</h1>
<ul>
<li>Config methods are const</li>
<li>Added <code>EncoderStringWriter</code> to allow encoding directly to a String</li>
<li><code>EncoderWriter</code> now owns its delegate writer rather than keeping a reference to it (though refs still work)
<ul>
<li>As a consequence, it is now possible to extract the delegate writer from an <code>EncoderWriter</code> via <code>finish()</code>, which returns <code>Result<W></code> instead of <code>Result<()></code>. If you were calling <code>finish()</code> explicitly, you will now need to use <code>let _ = foo.finish()</code> instead of just <code>foo.finish()</code> to avoid a warning about the unused value.</li>
</ul>
</li>
<li>When decoding input that has both an invalid length and an invalid symbol as the last byte, <code>InvalidByte</code> will be emitted instead of <code>InvalidLength</code> to make the problem more obvious.</li>
</ul>
<h1>0.12.2</h1>
<ul>
<li>Add <code>BinHex</code> alphabet</li>
</ul>
<h1>0.12.1</h1>
<ul>
<li>Add <code>Bcrypt</code> alphabet</li>
</ul>
<h1>0.12.0</h1>
<ul>
<li>A <code>Read</code> implementation (<code>DecoderReader</code>) to let users transparently decoded data from a b64 input source</li>
<li>IMAP's modified b64 alphabet</li>
<li>Relaxed type restrictions to just <code>AsRef<[ut8]></code> for main <code>encode*</code>/<code>decode*</code> functions</li>
<li>A minor performance improvement in encoding</li>
</ul>
<h1>0.11.0</h1>
<ul>
<li>Minimum rust version 1.34.0</li>
<li><code>no_std</code> is now supported via the two new features <code>alloc</code> and <code>std</code>.</li>
</ul>
<h1>0.10.1</h1>
<ul>
<li>Minimum rust version 1.27.2</li>
<li>Fix bug in streaming encoding (<a href="https://github.com/marshallpierce/rust-base64/pull/90">#90</a>): if the underlying writer didn't write all the bytes given to it, the remaining bytes would not be retried later. See the docs on <code>EncoderWriter::write</code>.</li>
<li>Make it configurable whether or not to return an error when decoding detects excess trailing bits.</li>
</ul>
<h1>0.10.0</h1>
<ul>
<li>Remove line wrapping. Line wrapping was never a great conceptual fit in this library, and other features (streaming encoding, etc) either couldn't support it or could support only special cases of it with a great increase in complexity. Line wrapping has been pulled out into a <a href="https://crates.io/crates/line-wrap">line-wrap</a> crate, so it's still available if you need it.
<ul>
<li><code>Base64Display</code> creation no longer uses a <code>Result</code> because it can't fail, which means its helper methods for common
configs that <code>unwrap()</code> for you are no longer needed</li>
</ul>
</li>
<li>Add a streaming encoder <code>Write</code> impl to transparently base64 as you write.</li>
<li>Remove the remaining <code>unsafe</code> code.</li>
<li>Remove whitespace stripping to simplify <code>no_std</code> support. No out of the box configs use it, and it's trivial to do yourself if needed: <code>filter(|b| !b" \n\t\r\x0b\x0c".contains(b)</code>.</li>
<li>Detect invalid trailing symbols when decoding and return an error rather than silently ignoring them.</li>
</ul>
<h1>0.9.3</h1>
<ul>
<li>Update safemem</li>
</ul>
<h1>0.9.2</h1>
<ul>
<li>Derive <code>Clone</code> for <code>DecodeError</code>.</li>
</ul>
<!-- raw HTML omitted -->
</blockquote>
<p>... (truncated)</p>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="b4fc91325e"><code>b4fc913</code></a> v0.13.0</li>
<li><a href="bba4c5d11e"><code>bba4c5d</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/145">#145</a> from marshallpierce/mp/cleanup</li>
<li><a href="42967320b3"><code>4296732</code></a> Add docs and other cleanup</li>
<li><a href="6bb3556633"><code>6bb3556</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/144">#144</a> from untitaker/invalid-bytes-not-length</li>
<li><a href="5b40e0c04e"><code>5b40e0c</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/142">#142</a> from marshallpierce/mp/string-writer</li>
<li><a href="8b1ae22bab"><code>8b1ae22</code></a> Rename StrWrite to StrConsumer</li>
<li><a href="27ccb6591e"><code>27ccb65</code></a> fix tests</li>
<li><a href="d15cd384e1"><code>d15cd38</code></a> Give better error messages when decoding data with trailing newlines</li>
<li><a href="5a56885c65"><code>5a56885</code></a> Introduce StrWriter to allow ESW to wrap both a String and a &mut String</li>
<li><a href="2dc0296d2a"><code>2dc0296</code></a> Merge pull request <a href="https://github.com/marshallpierce/rust-base64/issues/143">#143</a> from marshallpierce/mp/invalid-length-doc</li>
<li>Additional commits viewable in <a href="https://github.com/marshallpierce/rust-base64/compare/v0.12.3...v0.13.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
321: Properly handle concurrent messages to and from peers r=thomaseizinger a=thomaseizinger
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
322: Refactor `ExecutionParams` and harmonize sync intervals of wallets r=thomaseizinger a=thomaseizinger
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Previously, we were forwarding incoming messages from peers to all
swaps that were currently running. That is obviously wrong. The new
design scopes an `EventLoopHandle` to a specific PeerId to avoid
this problem.
We define the sync interval as 1/10th of the blocktime. For the
special case of our tests, we however check at max once per second.
The tests have a super fast blocktime. As such we shouldn't hammer
the nodes with a request every 100ms.
Bob does not care whether tx lock is confirmed. That is alice's problem.
This wait was introduced to remedy a bug in status_of_script() which was
failing when called on a transaction with no confirmations.
320: Fix env filter for asb r=thomaseizinger a=thomaseizinger
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
317: Fix monero refresh interval r=thomaseizinger a=thomaseizinger
The comparison should be the MAXIMUM of the two values, not the
minimum, otherwise we always refresh at an interval of 1 second.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
A non-interactive terminal is likely something along the lines of
journalctl which captures a timestamp by itself. In theory, it could
also be just a logfile but we rather accept this limitation and keep
the configuration surface simple rather than exposing another config
switch.
1. The asb didn't log any if the statements within main.rs
2. We were initializing unnecessary filters that don't make any sense
for the asb. warp and http are not used and the harness-es are for
test only.
We have a repeated pattern where we construct one of our
Tx{Cancel,Redeem,Punish,Refund,Lock} transactions and wait until
the status of this transaction changes. We can make this more
ergonomic by creating and implementing a `Watchable` trait that
gives access to the TxId and relevant script for this transaction.
This allows us to remove a parameter from the `watch_until_status`
function.
Additionally, there is a 2nd pattern: "Completing" one of these
transaction and waiting until they are confirmed with the configured
number of blocks for finality. We can make this more ergonomic by
returning a future from `broadcast` that callers can await in case
they want to wait for the broadcasted transaction to reach finality.
The execution params don't change throughout the lifetime of the
program. They can be set in the wallet at the very beginning.
This simplifies the interface of the wallet functions.
We achieve our optimizations in three ways:
1. Batching calls instead of making them individually.
To get access to the batch calls, we replace all our
calls to the HTTP interface with RPC calls.
2. Never directly make network calls based on function
calls on the wallet.
Instead, inquiring about the status of a script always
just returns information based on local data. With every
call, we check when we last refreshed the local data and
do so if the data is considered to be too old. This
interval is configurable.
3. Use electrum's notification feature to get updated
with the latest blockheight.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Rishab Sharma <rishflab@hotmail.com>
We reduce indirection by constructing TxPunish directly based off
`State3` and make the type itself more powerful by moving the logic
of completing it with a signature onto it.
Instead of spawning the swap inside the event loop we send the swap back
to the caller to be spawned. This means we no longer need the remote handle
that was only used in the tests.
This now properly logs the swap results in production.
It also gives us more control over Alice's swap in the tests.
This allows us to have access to RedeemTx from within the scope
of the state transition which we are going to need for more
efficient watching of what happens to this TX on the blockchain.
314: Remove CLI config file in favour of parameters r=thomaseizinger a=da-kami
Fixes#282
The CLI has sensible default values for all parameters,
thus a config file is not really an advantage but just
keeps getting in our way, so re remove it.
Trait impls on `Data` needed for structopt, see https://docs.rs/structopt/0.3.21/structopt/#default-values
Co-authored-by: Daniel Karzel <daniel@comit.network>
The CLI has sensible default values for all parameters,
thus a config file is not really an advantage but just
keeps getting in our way, so re remove it.
306: Fix logging and retrying of Monero transaction watching r=thomaseizinger a=thomaseizinger
Hopefully, this should also reduce the load because I am not asking the node every second.
Related: https://github.com/comit-network/xmr-btc-swap/issues/202
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Daniel Karzel <daniel@comit.network>
Instead, we use a regular loop and extract everything into a function
that can be independently tested.
`backoff` would be useful to retry the actual call to the node.
This config setting makes backoff stop retrying if we didn't get an
error within this timeframe.
For us, this results in backoff not actually doing anything.
The connection to kraken is very long-running. It might be active
for hours without failing. However, the default value for
`max_elapsed_time` is set to 15 minutes. As such, once the connection
fails any time after that, backoff doesn't actually retry the operation
but just gives up.
Fixes#303.
In order to be able to re-connect on certain errors, we model
connection errors separately from parsing errors. We also change
the API of the whole module to no longer forward all errors to
the subscribers but instead, only update the subscribers with
either a latest rate or a permanent failure in case we exhausted
all our options to re-connect the websocket.
To model all of this properly, we introduce to sub-modules so that
each submodule can have their own `Error` type.
Resolves#297.
First, we tell the user that we are now waiting for Alice to lock
the monero. Additionally, we tell them once we received the
transfer proof which will lead directly into the
"waiting for confirmations" function.
The type hints are generated from the field names. This has the
unfortunate consequence of the config field becoming file_path which
does not really make sense people working on the codebase.
