716: Release version 0.8.2 r=rishflab a=comit-botty-mc-botface
Hi `@rishflab!`
This PR was created in response to a manual trigger of the release workflow here: https://github.com/comit-network/xmr-btc-swap/actions/runs/1188401341.
I've updated the changelog and bumped the versions in the manifest files in this commit: fb0a20106856597ab75239548396d6a9ff52c5dc.
Merging this PR will create a GitHub release and upload any assets that are created as part of the release build.
Co-authored-by: COMIT Botty McBotface <botty@coblox.tech>
704: Allow withdrawing and viewing of the bitcoin balance on swap-cli r=rishflab a=devbordecraft
Same mechanics of the ASB but on swap-cli as discussed in #694
Co-authored-by: devbordecraft <devbordecraft>
705: Handle Results of waiting for timelocks to expire r=rishflab a=da-kami
Fixes an issue where the CLI is transitioning into a `CancelTimelockExpired` state but the timelock is actually not expired yet.
This happened because watching for confirmations errored and the error was not handled but the same behaviour as reaching the cancel timelock height was applied.
For now this PR will fail the execution in case of the block height watching logic failing. Eventually there should be a more resilient strategy that includes retries.
Co-authored-by: Daniel Karzel <daniel@comit.network>
Co-authored-by: rishflab <rishflab@hotmail.com>
Bob was timing out if the encrypted signature could not be sent in 60
seconds. This behaviour is unnecessary because we are racing against
the cancel timelock anyway. By timing out before this, we remove the
opportunity for bob and alice to re-establish a connection.
657: Load wallet in monero-wallet-rpc on demand if necessary r=thomaseizinger a=thomaseizinger
cc `@sethsimmons`
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Previously, we relied on the wallet in the `monero-wallet-rpc` daemon
to be loaded as we do on startup. As a consequence of this expectation,
restarting `monero-wallet-rpc` to fix bugs like #652 resulted in the
ASB no longer operating correctly.
To fix this, we now load the wallet on-demand in case the daemon responds
with the error code -13.
Ideally, we would implement this behaviour generically using the proxy
pattern on the `MoneroWalletRpc` trait. Unfortunately, when attempting
to do so we uncover a limitation in the design of `jsonrpc_client`.
This limitation is tracked in https://github.com/thomaseizinger/rust-jsonrpc-client/issues/47.
Once fixed, we can implement this logic in a more robust way that is not
tied to the `check_tx_key` RPC call but applies to any RPC call automatically.
681: Move "Lost connection" log line from WARN to Debug r=thomaseizinger a=sethsimmons
Per #660, moving the log line on a peer closing connection outside of a swap to DEBUG instead of WARN, as there is no action that can be taken by the ASB owner.
Fixes#660.
Co-authored-by: Seth Simmons <sethsimmons@protonmail.com>
Per #660, moving the log line on a peer closing connection outside of a swap to DEBUG instead of WARN, as there is no action that can be taken by the ASB owner.
668: Bump tracing-subscriber from 0.2.19 to 0.2.20 r=thomaseizinger a=dependabot[bot]
Bumps [tracing-subscriber](https://github.com/tokio-rs/tracing) from 0.2.19 to 0.2.20.
<details>
<summary>Commits</summary>
<ul>
<li><a href="26506d5eaa"><code>26506d5</code></a> subscriber: prepare to release v0.2.20 (<a href="https://github-redirect.dependabot.com/tokio-rs/tracing/issues/1514">#1514</a>)</li>
<li><a href="0049ae3d82"><code>0049ae3</code></a> core: prepare to release 0.1.19 (<a href="https://github-redirect.dependabot.com/tokio-rs/tracing/issues/1513">#1513</a>)</li>
<li><a href="306598d5db"><code>306598d</code></a> opentelemetry: prepare for 0.15.0 release (<a href="https://github-redirect.dependabot.com/tokio-rs/tracing/issues/1501">#1501</a>) (<a href="https://github-redirect.dependabot.com/tokio-rs/tracing/issues/1506">#1506</a>)</li>
<li><a href="e6c53e649d"><code>e6c53e6</code></a> examples: use <code>tempfile</code> in<code>fmt-multiple-writers</code></li>
<li><a href="1b8fce963d"><code>1b8fce9</code></a> chore: don't include dev-dependencies in MSRV builds at all</li>
<li><a href="7279cf04fe"><code>7279cf0</code></a> chore: ignore unmaintained warning for <code>net2</code> in <code>cargo audit</code></li>
<li><a href="20e1588cfb"><code>20e1588</code></a> examples: use <code>tempfile</code> in <code>inferno-flame</code></li>
<li><a href="058c9e2519"><code>058c9e2</code></a> flame: replace <code>tempdir</code> with <code>tempfile</code></li>
<li><a href="edc85a9ba8"><code>edc85a9</code></a> appender: replace <code>tempdir</code> with <code>tempfile</code></li>
<li><a href="cc40b68ed0"><code>cc40b68</code></a> examples: bump <code>hyper</code> dep to 0.14.11</li>
<li>Additional commits viewable in <a href="https://github.com/tokio-rs/tracing/compare/tracing-subscriber-0.2.19...tracing-subscriber-0.2.20">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
665: Bump serde_json from 1.0.64 to 1.0.66 r=thomaseizinger a=dependabot[bot]
Bumps [serde_json](https://github.com/serde-rs/json) from 1.0.64 to 1.0.66.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/serde-rs/json/releases">serde_json's releases</a>.</em></p>
<blockquote>
<h2>v1.0.66</h2>
<ul>
<li>Preserve exponent signifier and unary plus in exponent of arbitrary_precision numbers (<a href="https://github-redirect.dependabot.com/serde-rs/json/issues/786">#786</a>, thanks <a href="https://github.com/ruifengx"><code>`@ruifengx</code></a>)</li>`
</ul>
<h2>v1.0.65</h2>
<ul>
<li>Documentation improvements</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="6346bb3003"><code>6346bb3</code></a> Release 1.0.66</li>
<li><a href="7780a670e7"><code>7780a67</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/serde-rs/json/issues/789">#789</a> from serde-rs/orpattern</li>
<li><a href="53e6ce4a67"><code>53e6ce4</code></a> Restore compatiblity with older rustc after PR 786</li>
<li><a href="c38fc6530b"><code>c38fc65</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/serde-rs/json/issues/786">#786</a> from ruifengx/master</li>
<li><a href="c9193d4ed9"><code>c9193d4</code></a> Release 1.0.65</li>
<li><a href="f20557691d"><code>f205576</code></a> Merge pull request 788 from jplatte/doc-cfg</li>
<li><a href="6f15a0e1b2"><code>6f15a0e</code></a> Add doc(cfg(feature = "std")) attribute where appropriate</li>
<li><a href="d8f70a3861"><code>d8f70a3</code></a> Add CI job to ensure documentation can be built</li>
<li><a href="e2978b6a77"><code>e2978b6</code></a> Document unbounded_depth, raw_value feature-gated API via doc_cfg</li>
<li><a href="21523246e5"><code>2152324</code></a> Make arbitrary_precision preserve the exact string representation</li>
<li>Additional commits viewable in <a href="https://github.com/serde-rs/json/compare/v1.0.64...v1.0.66">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
664: Bump anyhow from 1.0.42 to 1.0.43 r=thomaseizinger a=dependabot[bot]
Bumps [anyhow](https://github.com/dtolnay/anyhow) from 1.0.42 to 1.0.43.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/dtolnay/anyhow/releases">anyhow's releases</a>.</em></p>
<blockquote>
<h2>1.0.43</h2>
<ul>
<li>Take -Zallow-features restrictions from Cargo configuration file into account on sufficiently new versions of nightly Cargo (<a href="https://github-redirect.dependabot.com/dtolnay/anyhow/issues/157">#157</a>, thanks <a href="https://github.com/jonhoo"><code>`@jonhoo</code></a>)</li>`
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="39899cc168"><code>39899cc</code></a> Release 1.0.43</li>
<li><a href="f8108162d4"><code>f810816</code></a> Touch up PR 157</li>
<li><a href="a3aba77275"><code>a3aba77</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/dtolnay/anyhow/issues/157">#157</a> from jonhoo/fix-156</li>
<li><a href="6c20a068bb"><code>6c20a06</code></a> Include Cargo rustc configuration in probe</li>
<li><a href="277894316c"><code>2778943</code></a> Merge pull request 160 from BramBonne/version-bump</li>
<li><a href="496cba42ea"><code>496cba4</code></a> Bump minor version</li>
<li>See full diff in <a href="https://github.com/dtolnay/anyhow/compare/1.0.42...1.0.43">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
663: Bump rust_decimal from 1.14.3 to 1.15.0 r=thomaseizinger a=dependabot[bot]
Bumps [rust_decimal](https://github.com/paupino/rust-decimal) from 1.14.3 to 1.15.0.
<details>
<summary>Commits</summary>
<ul>
<li><a href="a7288bbcbc"><code>a7288bb</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/410">#410</a> from paupino/version/1.15</li>
<li><a href="4e03adcfe6"><code>4e03adc</code></a> Added information about maths-nopanic</li>
<li><a href="3a1dce353a"><code>3a1dce3</code></a> Update version.md for release</li>
<li><a href="76f1c914bf"><code>76f1c91</code></a> Added Build.md with build instructions</li>
<li><a href="5b1da93a73"><code>5b1da93</code></a> Merge branch 'master' of github.com:paupino/rust-decimal into version/1.15</li>
<li><a href="fad2d4f989"><code>fad2d4f</code></a> Minor documentation improvements</li>
<li><a href="67b50ad8d1"><code>67b50ad</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/paupino/rust-decimal/issues/408">#408</a> from paupino/issue/401</li>
<li><a href="cfcb502460"><code>cfcb502</code></a> Merge branch 'master' into issue/401</li>
<li><a href="e8727e146f"><code>e8727e1</code></a> Fixes linting warning for log10 logic</li>
<li><a href="bb347caa6a"><code>bb347ca</code></a> Merge branch 'master' into issue/401</li>
<li>Additional commits viewable in <a href="https://github.com/paupino/rust-decimal/compare/1.14.3...1.15.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
631: Bump tokio-tungstenite from 0.14.0 to 0.15.0 r=thomaseizinger a=dependabot[bot]
Bumps [tokio-tungstenite](https://github.com/snapview/tokio-tungstenite) from 0.14.0 to 0.15.0.
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/snapview/tokio-tungstenite/blob/master/CHANGELOG.md">tokio-tungstenite's changelog</a>.</em></p>
<blockquote>
<h1>0.15.0</h1>
<ul>
<li>Update the <code>tungstenite-rs</code> version to <code>0.14.0</code>,
<a href="https://github.com/snapview/tungstenite-rs/blob/master/CHANGELOG.md#0140">check <code>tungstenite-rs</code> release for more details</a>.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="614a4b12eb"><code>614a4b1</code></a> Update the changelog</li>
<li><a href="6e1005f968"><code>6e1005f</code></a> Bump version</li>
<li><a href="44190cfef2"><code>44190cf</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/174">#174</a> from SyedAhkam/master</li>
<li><a href="bed60c753d"><code>bed60c7</code></a> Derive <code>Debug</code> trait for <code>MaybeTlsStream</code></li>
<li><a href="6ce3591789"><code>6ce3591</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/164">#164</a> from torlenor/document_tls_features</li>
<li><a href="4686ae0041"><code>4686ae0</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/snapview/tokio-tungstenite/issues/165">#165</a> from snapview/fix-autobahn</li>
<li><a href="e861b1be06"><code>e861b1b</code></a> ci: do not use Travis, superseded by GH Actions</li>
<li><a href="12e3dca65a"><code>12e3dca</code></a> tests: fix confusing wrong paths in the scripts</li>
<li><a href="639b106739"><code>639b106</code></a> tests: use autobahn test suite as docker image</li>
<li><a href="c9b886ea72"><code>c9b886e</code></a> Add documentation about TLS features to README</li>
<li>Additional commits viewable in <a href="https://github.com/snapview/tokio-tungstenite/compare/v0.14.0...v0.15.0">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
641: Bump thomaseizinger/create-pull-request from 1.1.0 to 1.2.1 r=thomaseizinger a=dependabot[bot]
Bumps [thomaseizinger/create-pull-request](https://github.com/thomaseizinger/create-pull-request) from 1.1.0 to 1.2.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/releases">thomaseizinger/create-pull-request's releases</a>.</em></p>
<blockquote>
<h2>1.2.1</h2>
<p>No release notes provided.</p>
<h2>1.2.0</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/thomaseizinger/create-pull-request/blob/master/CHANGELOG.md">thomaseizinger/create-pull-request's changelog</a>.</em></p>
<blockquote>
<h1>Changelog</h1>
<p>All notable changes to this project will be documented in this file.</p>
<p>The format is based on <a href="https://keepachangelog.com/en/1.0.0/">Keep a Changelog</a>,
and this project adheres to <a href="https://semver.org/spec/v2.0.0.html">Semantic Versioning</a>.</p>
<h2>[Unreleased]</h2>
<h2>[1.2.0] - 2021-07-26</h2>
<h3>Added</h3>
<ul>
<li>Support for adding labels by setting <code>labels</code></li>
<li>Check for existing pull request and <code>created</code> action output</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="603900158e"><code>6039001</code></a> Use github.actor instead of hardcoded name</li>
<li><a href="f3b6912a65"><code>f3b6912</code></a> Added labels to action.yml (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/75">#75</a>)</li>
<li><a href="8aa44c8cb5"><code>8aa44c8</code></a> Update CHANGELOG.md</li>
<li><a href="0afa85c37f"><code>0afa85c</code></a> Added support for labels and existing PR check (v2 from master) (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/61">#61</a>)</li>
<li><a href="1737745289"><code>1737745</code></a> Add missing links to changelog</li>
<li><a href="2d426a48b7"><code>2d426a4</code></a> Create CONTRIBUTING.md</li>
<li><a href="296164f67d"><code>296164f</code></a> Misc (<a href="https://github-redirect.dependabot.com/thomaseizinger/create-pull-request/issues/52">#52</a>)</li>
<li>See full diff in <a href="https://github.com/thomaseizinger/create-pull-request/compare/1.1.0...1.2.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
655: Bump comfy-table from 4.0.1 to 4.1.1 r=thomaseizinger a=dependabot[bot]
Bumps [comfy-table](https://github.com/nukesor/comfy-table) from 4.0.1 to 4.1.1.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/nukesor/comfy-table/releases">comfy-table's releases</a>.</em></p>
<blockquote>
<h2>v4.1.1</h2>
<h2>[4.1.1] - 2021-08-11</h2>
<h3>Added</h3>
<ul>
<li><code>tty</code> feature flag, which enables tty related functionality.
This includes styling and terminal-width detection.
The <code>tty</code> feature flag is enabled by default.
Implemented by <a href="https://github.com/roee88">roee88</a> in <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/pull/47">#47</a>.</li>
</ul>
<h2>v4.1.0</h2>
<h2>[4.1.0] - 2021-08-09</h2>
<h3>Added</h3>
<ul>
<li>Add <code>modifiers::UTF8_SOLID_INNER_BORDERS</code>, which makes the inner borders solid lines: <code>│─</code> by <a href="https://github.com/ModProg">ModProg</a> for <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/issues/39">#39</a>.</li>
<li>Add <code>presets::ASCII_BORDERS_ONLY_CONDENSED</code>, which is <code>ASCII_BORDERS_ONLY</code> but without spacing between rows <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/issues/43">#43</a>.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Several preset examples weren't correct.</li>
<li>Multi-character UTF8 symbols are now handled correctly in most situations.
Table-layout might still break for 1-character columns.</li>
<li>Mid-word splitting now takes multi-character utf8 characters into account.</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Rename <code>ASCII_HORIZONTAL_BORDERS_ONLY</code> to <code>ASCII_HORIZONTAL_ONLY</code>. Old imports will still work until v5.0.</li>
<li>Rename <code>UTF8_HORIZONTAL_BORDERS_ONLY</code> to <code>UTF8_HORIZONTAL_ONLY</code>. Old imports will still work until v5.0.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/Nukesor/comfy-table/blob/master/CHANGELOG.md">comfy-table's changelog</a>.</em></p>
<blockquote>
<h2>[4.1.1] - 2021-08-11</h2>
<h3>Added</h3>
<ul>
<li><code>tty</code> feature flag, which enables tty related functionality.
This includes styling and terminal-width detection.
The <code>tty</code> feature flag is enabled by default.
Implemented by <a href="https://github.com/roee88">roee88</a> in <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/pull/47">#47</a>.</li>
</ul>
<h2>[4.1.0] - 2021-08-09</h2>
<h3>Added</h3>
<ul>
<li>Add <code>modifiers::UTF8_SOLID_INNER_BORDERS</code>, which makes the inner borders solid lines: <code>│─</code> by <a href="https://github.com/ModProg">ModProg</a> for <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/issues/39">#39</a>.</li>
<li>Add <code>presets::ASCII_BORDERS_ONLY_CONDENSED</code>, which is <code>ASCII_BORDERS_ONLY</code> but without spacing between rows <a href="https://github-redirect.dependabot.com/Nukesor/comfy-table/issues/43">#43</a>.</li>
</ul>
<h3>Fixed</h3>
<ul>
<li>Several preset examples weren't correct.</li>
<li>Multi-character UTF8 symbols are now handled correctly in most situations.
Table-layout might still break for 1-character columns.</li>
<li>Mid-word splitting now takes multi-character utf8 characters into account.</li>
</ul>
<h3>Changed</h3>
<ul>
<li>Rename <code>ASCII_HORIZONTAL_BORDERS_ONLY</code> to <code>ASCII_HORIZONTAL_ONLY</code>. Old imports will still work until v5.0.</li>
<li>Rename <code>UTF8_HORIZONTAL_BORDERS_ONLY</code> to <code>UTF8_HORIZONTAL_ONLY</code>. Old imports will still work until v5.0.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="9468194166"><code>9468194</code></a> (cargo-release) version 4.1.1</li>
<li><a href="7522fc3c7f"><code>7522fc3</code></a> docs: Set release date for 4.1.1</li>
<li><a href="961b28f2b0"><code>961b28f</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/nukesor/comfy-table/issues/48">#48</a> from Nukesor/refactor_test_workflow</li>
<li><a href="2c1d4f93a3"><code>2c1d4f9</code></a> ci: Simplify test workflow for different targets</li>
<li><a href="e40d2fc393"><code>e40d2fc</code></a> docs: Add changelog entry for tty feature flag</li>
<li><a href="9d58bd1454"><code>9d58bd1</code></a> Merge pull request <a href="https://github-redirect.dependabot.com/nukesor/comfy-table/issues/47">#47</a> from roee88/no-tty</li>
<li><a href="39369ec927"><code>39369ec</code></a> extracted tty styling to function</li>
<li><a href="58306c0a58"><code>58306c0</code></a> Add a feature flag for tty support</li>
<li><a href="506a10ef5b"><code>506a10e</code></a> (cargo-release) start next development iteration 4.1.1-alpha.0</li>
<li><a href="3307e9b46d"><code>3307e9b</code></a> (cargo-release) version 4.1.0</li>
<li>Additional commits viewable in <a href="https://github.com/nukesor/comfy-table/compare/v4.0.1...v4.1.1">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
639: Bump hyper from 0.14.10 to 0.14.11 r=thomaseizinger a=dependabot[bot]
Bumps [hyper](https://github.com/hyperium/hyper) from 0.14.10 to 0.14.11.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/hyperium/hyper/releases">hyper's releases</a>.</em></p>
<blockquote>
<h2>v0.14.11</h2>
<h2>Bug Fixes</h2>
<ul>
<li><strong>client:</strong> retry when pool checkout returns closed HTTP2 connection (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2585">#2585</a>) (<a href="52214f391c">52214f39</a>)</li>
<li><strong>http2:</strong>
<ul>
<li>improve I/O errors emitted by H2Upgraded (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2598">#2598</a>) (<a href="f51c677dec">f51c677d</a>)</li>
<li>preserve <code>proxy-authenticate</code> and <code>proxy-authorization</code> headers (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2597">#2597</a>) (<a href="5243570137">52435701</a>)</li>
</ul>
</li>
</ul>
<h2>Features</h2>
<ul>
<li><strong>ffi:</strong> add hyper_request_on_informational (<a href="25d18c0b74">25d18c0b</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Changelog</summary>
<p><em>Sourced from <a href="https://github.com/hyperium/hyper/blob/master/CHANGELOG.md">hyper's changelog</a>.</em></p>
<blockquote>
<h3>v0.14.11 (2021-07-21)</h3>
<h4>Bug Fixes</h4>
<ul>
<li><strong>client:</strong> retry when pool checkout returns closed HTTP2 connection (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2585">#2585</a>) (<a href="52214f391c">52214f39</a>)</li>
<li><strong>http2:</strong>
<ul>
<li>improve I/O errors emitted by H2Upgraded (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2598">#2598</a>) (<a href="f51c677dec">f51c677d</a>)</li>
<li>preserve <code>proxy-authenticate</code> and <code>proxy-authorization</code> headers (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2597">#2597</a>) (<a href="5243570137">52435701</a>)</li>
</ul>
</li>
</ul>
<h4>Features</h4>
<ul>
<li><strong>ffi:</strong> add hyper_request_on_informational (<a href="25d18c0b74">25d18c0b</a>)</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="19f38b3e7f"><code>19f38b3</code></a> v0.14.11</li>
<li><a href="0112d35426"><code>0112d35</code></a> refactor(error): mark TransferEncodingInvalid variant only with server feature</li>
<li><a href="f70c8ffc7b"><code>f70c8ff</code></a> docs(example): add a get query method to params example (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2601">#2601</a>)</li>
<li><a href="f51c677dec"><code>f51c677</code></a> fix(http2): improve I/O errors emitted by H2Upgraded (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2598">#2598</a>)</li>
<li><a href="090ee08b03"><code>090ee08</code></a> refactor(http1): reject newlines in chunked extensions</li>
<li><a href="52214f391c"><code>52214f3</code></a> fix(client): retry when pool checkout returns closed HTTP2 connection (<a href="https://github-redirect.dependabot.com/hyperium/hyper/issues/2585">#2585</a>)</li>
<li><a href="5243570137"><code>5243570</code></a> fix(http2): preserve <code>proxy-authenticate</code> and <code>proxy-authorization</code> headers (...</li>
<li><a href="25d18c0b74"><code>25d18c0</code></a> feat(ffi): add hyper_request_on_informational</li>
<li><a href="1cd40b7e26"><code>1cd40b7</code></a> docs(README): update crates.io badge</li>
<li>See full diff in <a href="https://github.com/hyperium/hyper/compare/v0.14.10...v0.14.11">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting ``@dependabot` rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- ``@dependabot` rebase` will rebase this PR
- ``@dependabot` recreate` will recreate this PR, overwriting any edits that have been made to it
- ``@dependabot` merge` will merge this PR after your CI passes on it
- ``@dependabot` squash and merge` will squash and merge this PR after your CI passes on it
- ``@dependabot` cancel merge` will cancel a previously requested merge and block automerging
- ``@dependabot` reopen` will reopen this PR if it is closed
- ``@dependabot` close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- ``@dependabot` ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- ``@dependabot` ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
649: Instruct Ping to keep the connection alive r=thomaseizinger a=thomaseizinger
cc `@sethsimmons` This might fix#648.
CI is going to attach a binary to the workflow, do you mind giving that one a try and see if the disconnects still appear with that?
Fixes#648.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
645: Release version 0.8.1 r=thomaseizinger a=comit-botty-mc-botface
Hi `@thomaseizinger!`
This PR was created in response to a manual trigger of the release workflow here: https://github.com/comit-network/xmr-btc-swap/actions/runs/1133901105.
I've updated the changelog and bumped the versions in the manifest files in this commit: 7126d77dc1.
Merging this PR will create a GitHub release and upload any assets that are created as part of the release build.
Co-authored-by: COMIT Botty McBotface <botty@coblox.tech>
632: Bump vergen from 5.1.12 to 5.1.13 r=thomaseizinger a=dependabot[bot]
Bumps [vergen](https://github.com/rustyhorde/vergen) from 5.1.12 to 5.1.13.
<details>
<summary>Release notes</summary>
<p><em>Sourced from <a href="https://github.com/rustyhorde/vergen/releases">vergen's releases</a>.</em></p>
<blockquote>
<h2>v5.1.13</h2>
<ul>
<li>Turn off lints if using a stable version earlier than the MSRV (1.53 currently). Lints are only really needed during development so this should be safe.</li>
</ul>
</blockquote>
</details>
<details>
<summary>Commits</summary>
<ul>
<li><a href="1c00f484d1"><code>1c00f48</code></a> version bump for next release</li>
<li><a href="0949878498"><code>0949878</code></a> try to fix windows matrix</li>
<li><a href="6c33978575"><code>6c33978</code></a> added some lint matrix, updated linux, mac, windows matrix to grab one below ...</li>
<li><a href="d40ea9d5df"><code>d40ea9d</code></a> clippy copy_iterator allowed</li>
<li><a href="5d9b8cedbc"><code>5d9b8ce</code></a> disable lints for stable less than msrv (1.53)</li>
<li><a href="13dd4ba600"><code>13dd4ba</code></a> more lint tweaks</li>
<li><a href="93d93b4243"><code>93d93b4</code></a> lints update</li>
<li>See full diff in <a href="https://github.com/rustyhorde/vergen/compare/5.1.12...5.1.13">compare view</a></li>
</ul>
</details>
<br />
[](https://docs.github.com/en/github/managing-security-vulnerabilities/about-dependabot-security-updates#about-compatibility-scores)
You can trigger a rebase of this PR by commenting `@dependabot rebase`.
[//]: # (dependabot-automerge-start)
[//]: # (dependabot-automerge-end)
---
<details>
<summary>Dependabot commands and options</summary>
<br />
You can trigger Dependabot actions by commenting on this PR:
- `@dependabot rebase` will rebase this PR
- `@dependabot recreate` will recreate this PR, overwriting any edits that have been made to it
- `@dependabot merge` will merge this PR after your CI passes on it
- `@dependabot squash and merge` will squash and merge this PR after your CI passes on it
- `@dependabot cancel merge` will cancel a previously requested merge and block automerging
- `@dependabot reopen` will reopen this PR if it is closed
- `@dependabot close` will close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually
- `@dependabot ignore this major version` will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this minor version` will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
- `@dependabot ignore this dependency` will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)
</details>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
