Commit Graph

801 Commits

Author SHA1 Message Date
COMIT Botty McBotface
43dc74cd9d Prepare release 0.5.0 2021-04-17 07:23:09 +00:00
Daniel Karzel
c1e993deb2
Json codec for quote protocol
A `RequestResponseCodec` for pull-based protocols where the response is encoded using JSON.
This was added to more properly express the behavior of the quote protocol, where the dialer
doesn't send any message and expects the listener to directly send the response.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-16 16:00:45 +10:00
Daniel Karzel
f70e2aa8d6
Listen on tcp and websocket transports
- Listen on both tcp and websockets as default
- Listening addresses in config as array
- Configure fallback transport using `or_transport` - if listening on a given address fails on WS, we fall back to TCP.
2021-04-16 16:00:38 +10:00
Thomas Eizinger
b417950f99
Improve error reporting of failed protocols
Instead of forwarding every error, we deliberately ignore certain
variants that are not worth being printed to the log. In particular,
this concerns "UnsupportedProtocols" and "ResponseOmission".

To make this less verbose we introduce a macro for mapping a
`RequestResponseEvent` to `{alice,bob}::OutEvent`. We use a macro
because those `OutEvent`s are different types and the only other
way of abstracting over them would be to introduce traits that we
implement on both of them.

To make the macro easier to use, we move all the `From` implementations
that convert between the protocol and the more high-level behaviour
into the actual protocol module.
2021-04-14 10:34:06 +10:00
Thomas Eizinger
f0f7288bb6
Introduce a redial::Behaviour
This behaviour makes Bob re-dial Alice with an exponential backoff as
soon as the connection is lost.
2021-04-14 10:07:14 +10:00
Thomas Eizinger
d4c10a1292
Introduce swarm::{alice,bob} function to construct a Swarm instance 2021-04-14 10:06:32 +10:00
bors[bot]
19766b9759
Merge #405
405: Concurrent swaps with same peer r=da-kami a=da-kami

Fixes #367 

- [x] Concurrent swaps with same peer

Not sure how much more time I should invest into this. We could just merge the current state and then do improvements on top...?

Improvements:

- [x] Think `// TODO: Remove unnecessary swap-id check` through and remove it
- [x] Add concurrent swap test, multiple swaps with same Bob
- [ ] Save swap messages without matching swap in execution in the database
- [ ] Assert the balances in the new concurrent swap tests
- [ ] ~~Add concurrent swap test, multiple swaps with different Bobs~~
- [ ] ~~Send swap-id in separate message, not on top of `Message0`~~

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-04-13 08:50:44 +00:00
Daniel Karzel
c976358c37
Multiple swaps with the same peer
- Swap-id is exchanged during execution setup. CLI (Bob) sends the swap-id to be used in his first message.
- Transfer poof and encryption signature messages include the swap-id so it can be properly associated with the correct swap.
- ASB: Encryption signatures are associated with swaps by swap-id, not peer-id.
- ASB: Transfer proofs are still associated to peer-ids (because they have to be sent to the respective peer), but the ASB can buffer multiple
- CLI: Incoming transfer proofs are checked for matching swap-id. If a transfer proof with a different swap-id than the current executing swap is received it will be ignored. We can change this to saving into the database.

Includes concurrent swap tests with the same Bob.

- One test that pauses and starts an additional swap after the transfer proof was received. Results in both swaps being redeemed after resuming the first swap.
- One test that pauses and starts an additional swap before the transfer proof is sent (just after BTC locked). Results in the second swap redeeming and the first swap being refunded (because the transfer proof on Bob's side is lost). Once we store transfer proofs that we receive during executing a different swap into the database both swaps should redeem.

Note that the monero harness was adapted to allow creating wallets with multiple outputs, which is needed for Alice.
2021-04-13 18:16:19 +10:00
Daniel Karzel
46f144ac67
Switch monero-rpc to debug in tests
To be able to see CI monero RPC errors.
2021-04-13 17:43:10 +10:00
bors[bot]
2f19222948
Merge #397
397: Always log at debug level to file r=rishflab a=rishflab

WILL SQUASH DOWN TO 3 COMMITS WHEN APPROVED!

Log at debug level to file

EnvFilter is applied globally. This means you cannot log at INFO level 
to the terminal and at DEBUG level to log files. To get a around this 
limitation I had to implement the layer trait on a new type and filter 
in the on_event() trait method. Each swap has its own log file denoted 
by its swap_id. The logger appends to the existing file when resuming a 
swap.

Closes #278 


I think the `DebugTerminalPritner` and `InfoTerminalPrinter` could be consolidated with some effort with some generics wizardry. It works for now and I think it can be done later. I wish in general there was a cleaner way to do this.
 

Co-authored-by: rishflab <rishflab@hotmail.com>
2021-04-09 00:19:56 +00:00
Daniel Karzel
489696ee08
Swap-id as file name for generated Monero wallet
Instead of using the private view-key as wallet filename we use the swap-id, to be able to identify which wallet is associated with which swap.
2021-04-08 19:23:54 +10:00
Daniel Karzel
548f057726
Try to open wallet in case generate_from_keys fails 2021-04-08 19:15:30 +10:00
Daniel Karzel
b60790a32c
Allow buffering multiple transfer proofs per peer
Allowing multiple swaps with the same peer requires buffering multiple transfer proofs per peer.
2021-04-08 17:02:18 +10:00
rishflab
8805002f96 Remove redundant noun from tracing initialiser functions 2021-04-08 16:14:32 +10:00
rishflab
9745d150e7 Log at debug level to file
EnvFilter is applied globally. This means you cannot log at INFO level
to the terminal and at DEBUG level to log files. To get a around this
limitation I had to implement the layer trait on a new type and filter
in the on_event() trait method. Each swap has its own log file denoted
by its swap_id. The logger appends to the existing file when resuming a
swap.

Closes #278
2021-04-08 16:10:35 +10:00
rishflab
e517c5934e Move asb tracing initializer to asb module 2021-04-08 10:51:54 +10:00
COMIT Botty McBotface
1687f84aa1 Prepare release 0.4.0 2021-04-06 08:20:31 +00:00
bors[bot]
32912ebd4a
Merge #394
394: Add a configurable spread to the ASB r=thomaseizinger a=thomaseizinger

Fixes #381.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-06 07:39:11 +00:00
bors[bot]
f0a8be6835
Merge #396
396: Remove default connection details from CLI r=thomaseizinger a=rishflab

Connecting buyers to us by default is not consistent with our vision of
a decentralised network of sellers.

Closes #395

Co-authored-by: rishflab <rishflab@hotmail.com>
2021-04-06 07:26:24 +00:00
rishflab
9b0467d43a Remove default connection details from CLI
Connecting buyers to us by default is not consistent with our vision of
a decentralised network of sellers.

Closes #395
2021-04-06 16:59:11 +10:00
bors[bot]
e0b859bb1e
Merge #387
387: Improve the resilience of the network layer r=thomaseizinger a=thomaseizinger

We improve the resilience in two ways:

1. Use a timeout on Bob's side for the execution-setup.
2. Use the `bmrng` library to model the communication between Alice and Bob.

See commit messages for details.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-06 06:20:30 +00:00
Thomas Eizinger
a99d12b9df
Add a configurable spread to the ASB
Fixes #381.
2021-04-06 16:16:58 +10:00
Thomas Eizinger
3e0301a9d4
Move FixedRate into event_loop module
This is where these types are used, they can be defined in there.
2021-04-06 16:16:57 +10:00
Thomas Eizinger
654cfff2a8
Make kraken module emit PriceUpdates instead of Rates 2021-04-06 16:16:56 +10:00
Thomas Eizinger
cfc530e8ab
Make ask field of Rate private 2021-04-06 16:16:53 +10:00
Thomas Eizinger
bc46d95985
Remove unnecessary Serialize implementations 2021-04-06 16:08:42 +10:00
Daniel Karzel
0341e7c9fc
Point BDK to commit that fixes overflow error
Edge cases of UTXOs where value < fee cause the BDK's `coin_select` calculation to panic.
This issue was fixed upstream thus we point the BDK dependency against the commit of the merged fix.
2021-04-06 14:50:27 +10:00
rishflab
7df93faa4b Remove unnecessary wrapper struct 2021-04-06 11:05:36 +10:00
Daniel Karzel
04b49d7117 Add command to print Bitcoin and Monero balance 2021-04-06 09:19:43 +10:00
Daniel Karzel
96008ec130 Add command to withdraw BTC
If no amount is given the wallet will be drained.
2021-04-06 09:19:43 +10:00
Daniel Karzel
f5e81bb0ee Move seed and env_config outside Start command 2021-04-06 09:19:43 +10:00
Daniel Karzel
d9d697821e Separate bitcoin and monero wallet initialization 2021-04-06 09:19:43 +10:00
Daniel Karzel
084fc618b4 Test Alice refunds if restarted and Bob refunded 2021-04-01 17:47:01 +11:00
Thomas Eizinger
1b2f476cae
Have --force flag only override the timelock check
It might very well be that the cancel transaction is already published.
If that is the case, there is no point in failing the command. We simply
transition to cancel and exit normally.

The reason this comes up now is because Alice now properly waits for
the cancel timelock as well and publishes the cancel transaction first.

Ultimately, she should not do that because there is no benefit to her
unless she can also publish the punish transaction.
2021-04-01 17:28:38 +11:00
Thomas Eizinger
24f444b9f7
Race sending transfer proof against cancel timelock
Sending the transfer proof might never resolve because Bob doesn't
come back online. In that case, we need to make sure we bail out
as soon as the timelock expires.
2021-04-01 17:09:18 +11:00
Thomas Eizinger
c0785ab05a
"Buffer" all requests to Alice until we are connected
We use the "precondition" feature of the `tokio::select!` macro to
avoid polling certain futures. In particular, we skip polling all
futures that - when resolved - require us to send a message to Alice.
2021-04-01 17:09:17 +11:00
Thomas Eizinger
1b0c29b424
Use bmrng to model communicaton of Alice's EventLoop with the handle
This allows us to delay the ACKing of the encrypted signature up until
the swap has actually requested it.

Similarly, it allows us to wait for the ACK of the transfer proof within
the swap before continuing.
2021-04-01 17:09:17 +11:00
Thomas Eizinger
1c47b32681
Use bmrng to model communicaton of Bob's EventLoop with the handle
bmrng is a library providing a request-response channel that allows
the receiving end of the channel to send a response back to the sender.
This allows us to more accurately implement the functions on the
`EventLoopHandle`. In particular, we now _wait_ for the ACK of specific
messages from the other party before resolving the future.

For example, when sending the encrypted signature, the async function
on the `EventLoopHandle` does not resolve until we received the ACK
from the other party.

We also delete the `Channels` abstraction in favor of directly creating
bmrng channels. This allows us to directly control the channel buffer
which we set to 1 because we don't need more than that on Bob's side.
2021-04-01 17:09:17 +11:00
Thomas Eizinger
958e5b12bc
Don't match on expired_timelocks and race it in a select in parallel
There is no point in first checking for the expired timelocks and
then constructing a `select!` that also watches for the timelock to
expiry.

We can simply only have the select! invocation to achieve the same
effect. In case the timelock is already expired, this future will
resolve immediately.

Normally, the polling order of `select!` is pseudo-random. We
configure it to be _biased_ here to make sure the futures are polled
in order.
2021-04-01 17:08:26 +11:00
Thomas Eizinger
dbe03ba1cf
Timeout Bob's execution-setup after 10 seconds
The execution setup is our only libp2p protocol that doesn't have
a timeout built-in. Hence, if anything fails on Alice's side, we
would wait here forever.

Wrapping the future in a timeout ensures that we fail eventually
if this protocol doesn't succeed.
2021-04-01 17:08:26 +11:00
Thomas Eizinger
5d75f1adba
Remove import line in favor of FQ macro usage 2021-04-01 17:08:26 +11:00
Thomas Eizinger
4c2e254543
Don't log subscription
This object is very verbose and not meant to be logged.
2021-04-01 17:08:25 +11:00
Thomas Eizinger
5b230bc75f
Don't import tracing macros
Typing them out is quicker than constantly adjusting imports.
2021-04-01 17:08:25 +11:00
Thomas Eizinger
90a7760124
Add some log statements to bob::cancel 2021-04-01 17:08:25 +11:00
Thomas Eizinger
3f54b39281
Make all error messages start with an uppercase letter 2021-04-01 16:12:14 +11:00
Thomas Eizinger
0ef9d97679
Remove delegation functions in favor of public fields
We don't need to hide the fields of this Behaviour as the only reason
for why this struct exists is because libp2p forces us to compose our
NetworkBehaviours into a new struct.
2021-04-01 16:12:13 +11:00
Thomas Eizinger
b1d0ae8db7
Remove dead code
No codepath constructs this event, we can delete the associated code.
2021-04-01 16:11:57 +11:00
Daniel Karzel
2135a6e53e
Alice resumes swaps 2021-04-01 16:09:13 +11:00
Daniel Karzel
b6e4fb4f9d
Improve comment 2021-04-01 16:06:49 +11:00
Daniel Karzel
d233e9914e
Avoid problems when re-ordering / changing Bob's states
Make it explicit in which states we are able NOT to cancel/refund.
2021-04-01 16:06:48 +11:00