Commit Graph

36 Commits

Author SHA1 Message Date
Daniel Karzel
202f6d1fa0
Bitcoin network check when building PSBT
This ensures that funds are not sent to an address on the wrong network.
2021-05-28 09:54:35 +10:00
Daniel Karzel
c9064d5a37
Add ping protocol to ensure connection is alive
Adds the ping behaviour to both ASB and CLI behaviour that periodically pings a connected party to ensure that the underlying network connection is still alive.
This fixes problems with long-running connections that become dead without a connection closure being reported back to the swarm.
2021-05-27 11:19:27 +10:00
COMIT Botty McBotface
3f2d094f65
Prepare release 0.6.0 2021-05-24 16:00:43 +10:00
Daniel Karzel
01af9a5676
Bitcoin transaction published state
This improves the error handling on the ASB.
Once the Bitcoin redeem transaction is seen in mempool, the state machine cannot transition to a cancel scenario anymore because at that point the CLI will have redeemed the Monero.
The additional state then waits for transaction finality.
2021-05-24 10:53:14 +10:00
Daniel Karzel
7ec323ea1f
Mainnet changelog entry 2021-05-20 13:03:33 +10:00
Daniel Karzel
1cdc23de32
Explicitly specify monero-wallet-rpc deamon port
In order to allow people to plug into public nodes / be more flexible with their own setup we now enforce specifying the monero daemon port to be used by the `monero-wallet-rpc`.
2021-05-14 09:50:52 +10:00
Philipp Hoenisch
fc0cceb180
Toggle json logs using commandline flag. 2021-05-11 15:28:25 +10:00
Daniel Karzel
652aae9590
Introduce a minimum buy amount
Introduces a minimum buy Bitcoin amount similar to the maximum amount already present.
For the CLI the minimum amount is enforced by waiting until at least the minimum is available as max-giveable amount.
2021-05-11 12:03:02 +10:00
Daniel Karzel
1d62f4916c
Move max_buy and ask_spread into config
Max-buy and spread is not something that one would configure on every run.
More convenient to keep this in the config.

The max-buy Bitcoin value was adapted to `0.02` which is more reasonable for mainnet.
Activated feature `serde-float` to serialize the spread (Decimal) as float instead of string.

```
...

[maker]
max_buy_btc = 0.02
ask_spread = 0.02
```
2021-05-11 12:02:57 +10:00
Daniel Karzel
daa572e5bf
Move recovery commands in dedicated module
Less clutter in the folder structure.
2021-05-07 16:21:02 +10:00
Daniel Karzel
4deb96a3c5
ASB manual recovery commands
Adds `cancel`, `refund`, `punish`, `redeem` and `safely-abort` commands to the ASB that can be used to trigger the specific scenario for the swap by ID.
2021-05-07 16:19:11 +10:00
Daniel Karzel
ea76ae5821
Return proper error to CLI for all expected scenarios
When a CLI requests a spot price have some errors that are expected, where we can provide a proper error message for the CLI:
- Balance of ASB too low
- Buy amount sent by CLI exceeds maximum buy amount accepted by ASB
- ASB is running in maintenance mode and does not accept incoming swap requests

All of these errors returns a proper error to the CLI and prints a warning in the ASB logs.
Any other unexpected error will result in closing the channel with the CLI and printing an error in the ASB logs.
2021-05-07 14:52:51 +10:00
Daniel Karzel
f6497778ed
Add resume-only mode for the ASB
Resume-only is a maintenance mode where no swaps are accepted but unfinished swaps are resumed.
This is achieve by ignoring incoming spot-price requests (that would lead to execution setup) in the event-loop.
2021-05-07 14:52:51 +10:00
Daniel Karzel
69f7565746
!fixup Different default directories for CLI and ASB
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap/asb
- CLI: xmr-btc-swap/cli

Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
2021-04-30 11:03:13 +10:00
Daniel Karzel
b0ffeeab1d
Different default directories for CLI and ASB
Using the same default directory as data-/config-dir has caused unwanted side effects when running both applications on the same machine.
Use these directory names:
- ASB: xmr-btc-swap-asb
- CLI: xmr-btc-swap-cli

Since the functionality is now application specific the respective functions were moved into the appropriate module of the application.
2021-04-29 19:02:16 +10:00
Philipp Hoenisch
99db8c9108
Apply suggestions from code review
Co-authored-by: Daniel Karzel <daniel.karzel@coblox.tech>
2021-04-28 16:04:25 +10:00
Philipp Hoenisch
632293cf91
Add support for swapping through Tor.
This PR does a few things.
* It adds a TorTransport which either dials through Tor's socks5 proxy or via clearnet.
* It enables ASB to register hidden services for each network it is listening on. We assume that we only care about different ports and re-use the same onion-address for all of them. The ASB requires to have access to Tor's control port.
* It adds support to dial through a local Tor socks5 proxy. We assume that Tor is always available on localhost.  Swap cli only requires Tor to be running so that it can send messages via Tor's socks5 proxy.
* It adds a new e2e test which swaps through Tor. For this we assume that Tor is currently running on localhost. All other tests are running via clear net.
2021-04-27 14:51:41 +10:00
COMIT Botty McBotface
43dc74cd9d Prepare release 0.5.0 2021-04-17 07:23:09 +00:00
Daniel Karzel
a114460520
Better wording 2021-04-17 16:51:41 +10:00
Thomas Eizinger
d1bc7e8fc2
Add changelog entry for redial fix 2021-04-17 16:50:49 +10:00
Thomas Eizinger
e957cbd909
Rewrite changelog entry as fix rather than a change 2021-04-17 16:39:01 +10:00
Daniel Karzel
c1e993deb2
Json codec for quote protocol
A `RequestResponseCodec` for pull-based protocols where the response is encoded using JSON.
This was added to more properly express the behavior of the quote protocol, where the dialer
doesn't send any message and expects the listener to directly send the response.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-16 16:00:45 +10:00
Daniel Karzel
f70e2aa8d6
Listen on tcp and websocket transports
- Listen on both tcp and websockets as default
- Listening addresses in config as array
- Configure fallback transport using `or_transport` - if listening on a given address fails on WS, we fall back to TCP.
2021-04-16 16:00:38 +10:00
Daniel Karzel
c976358c37
Multiple swaps with the same peer
- Swap-id is exchanged during execution setup. CLI (Bob) sends the swap-id to be used in his first message.
- Transfer poof and encryption signature messages include the swap-id so it can be properly associated with the correct swap.
- ASB: Encryption signatures are associated with swaps by swap-id, not peer-id.
- ASB: Transfer proofs are still associated to peer-ids (because they have to be sent to the respective peer), but the ASB can buffer multiple
- CLI: Incoming transfer proofs are checked for matching swap-id. If a transfer proof with a different swap-id than the current executing swap is received it will be ignored. We can change this to saving into the database.

Includes concurrent swap tests with the same Bob.

- One test that pauses and starts an additional swap after the transfer proof was received. Results in both swaps being redeemed after resuming the first swap.
- One test that pauses and starts an additional swap before the transfer proof is sent (just after BTC locked). Results in the second swap redeeming and the first swap being refunded (because the transfer proof on Bob's side is lost). Once we store transfer proofs that we receive during executing a different swap into the database both swaps should redeem.

Note that the monero harness was adapted to allow creating wallets with multiple outputs, which is needed for Alice.
2021-04-13 18:16:19 +10:00
Daniel Karzel
cf4d369b9c
Replace commit hash with old versioning scheme v0.3 2021-04-06 20:09:42 +10:00
COMIT Botty McBotface
1687f84aa1 Prepare release 0.4.0 2021-04-06 08:20:31 +00:00
bors[bot]
32912ebd4a
Merge #394
394: Add a configurable spread to the ASB r=thomaseizinger a=thomaseizinger

Fixes #381.

Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
2021-04-06 07:39:11 +00:00
rishflab
9b0467d43a Remove default connection details from CLI
Connecting buyers to us by default is not consistent with our vision of
a decentralised network of sellers.

Closes #395
2021-04-06 16:59:11 +10:00
Thomas Eizinger
a99d12b9df
Add a configurable spread to the ASB
Fixes #381.
2021-04-06 16:16:58 +10:00
bors[bot]
d144405182
Merge #376
376: ASB resumes unfinished swaps after startup r=da-kami a=da-kami

Fixes #374 

- [x] Save Bob peer-id in database for Alice
- [x]  Alice: Wait for `10` Monero confirmations in `BtcRefunded` instead of `XmrLocked` (requires extending the RPC to distinguish locked / unlocked balance)
- [x] Save Alice peer-id in database for Bob ~~(+ multiaddress and remove params from resume)~~
- [ ] ~~Refactor Bob in test setup (handle event-loop in test setup similar to Alice)~~

I decided against refactoring Bob in the test setup, because eventually we might still want to add concurrent swap tests with multiple Bobs. The refactoring I had in mind would not allow such kind of tests. 
Generally, the current state of the changes already contains enough added value to open the PR :)

Follow ups out of scope

- [ ] Parametrize database with role (Alice / Bob) and remove all the (currently useless) mapping between DB and protocol types.
- [ ]  Alice: Wait for transfer proof ack before transitioning to new `XmrLocked`

Co-authored-by: Daniel Karzel <daniel@comit.network>
2021-04-01 06:49:56 +00:00
Daniel Karzel
2135a6e53e
Alice resumes swaps 2021-04-01 16:09:13 +11:00
Daniel Karzel
d90496931b
Save Alice's peer-id in the db for Bob
This allows loading the seller-peer-id from the database upon resuming a swap.
Thus, the parameters `--seller-peer-id` is removed for the `resume` command.
Other than the peer-id the multi address of a seller can change and thus is
still a parameter. This parameter might become optional once we add DHT support.
2021-04-01 16:06:48 +11:00
Thomas Eizinger
e27c153c4a
Re-word changelog entry for bad readiness check of monero-wallet-rpc 2021-04-01 11:35:42 +11:00
Thomas Eizinger
52b9a78de2
Alice to validate Bob's PSBT for correctness
In order for the re-construction of TxLock to be meaningful, we limit
`Message2` to the PSBT instead of the full struct. This is a breaking
change in the network layer.

The PSBT is valid if:

- It has at most two outputs (we allow a change output)
- One of the outputs pays the agreed upon amount to a shared output script

Resolves #260.
2021-03-30 13:02:56 +11:00
rishflab
bc902ea63a Use language agnostic heuristic to check if monero_wallet_rpc is ready
Our strategy of searching for a english string to determine if
monero_wallet_rpc is ready is not compatible with languages other than
english. Instead we assume the monero rpc is ready if it has stopped
writing to stdout. We make a json rpc request to confirm this. A better
solution would have been to configure the monero_wallet_rpc to always
output in english but there is not command line argument to configure
the language.

Closes #353.
2021-03-25 18:13:06 +11:00
Thomas Eizinger
b25d21282d
Add CHANGELOG file 2021-03-25 11:12:00 +11:00