* ci: add cargo check on rust stable
* refactor: upgrade secp256kfun and fix resulting issues
* build(deps): update sigma_fun and ecdsa_fun to a52142cf7f
#1520#1521
* chore: fix clippy issue
* update to 91112f80b24
* bump to 294de1721add
* chore(deps): remove spectral
spectral fails to compile on rust stable 1.76 due to dep on deprecated
rustc-serialize
* secp256kfun: update to 7da9d277 and set rev in manifest
* update to 6fdc5d8
* switch to crates.io versions of ecdsa_fun and sigma_fun
* ci: update toolchain to 1.74 and fix draft action
* clippy fixes
---------
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
* saving: implementing internal api shared by cli and rpc server
* writing async rpc methods and using arc for shared struct references
* cleaning up, renamed Init to Context
* saving: cleaning up and initial work for tests
* Respond with bitcoin withdraw txid
* Print RPC server address
* Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints
* fixing tests in cli module
* uncommenting and fixing more tests
* split api module and propagate errors with rpc server
* moving methods to api and validating addresses for rpc
* add broadcast channel to handle shutdowns gracefully and prepare for RPC server test
* added files
* Update rpc.rs
* adding new unfinished RPC tests
* updating rpc-server tests
* fixing warnings
* fixing formatting and cargo clippy warnings
* fix missing import in test
* fix: add data_dir to config to make config command work
* set server listen address manually and return file locations in JSON on Config
* Add called api method and swap_id to tracing for context, reduced boilerplate
* Pass server_address properly to RpcServer
* Update Cargo.lock
* dprint fmt
* Add cancel_refund RPC endpoint
* Combine Cmd and Params
* Disallow concurrent swaps
* Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint
* Return wallet descriptor to RPC API caller
* Append all cli logs to single log file
After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter
* Add get_swap_expired_timelock timelock, other small refactoring
- Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished.
- Rename current_epoch to expired_timelock to enforce consistent method names
- Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct
- Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen
* initiating swaps in a separate task and handling shutdown signals with broadcast queues
* Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method
* WIP: Struct for concurrent swaps manager
* Ensure correct tracing spans
* Add note regarding Request, Method structs
* Update request.rs
* Add tracing span attribute log_reference_id to logs caused by rpc call
* Sync bitcoin wallet before initial max_giveable call
* use Span::current() to pass down to tracing span to spawned tasks
* Remove unused shutdown channel
* Add `get_monero_recovery_info` RPC endpoint
- Add `get_monero_recovery_info` RPC endpoint
- format PrivateViewKey using Display
* Rename `Method::RawHistory` to `Method::GetRawStates`
* Wait for swap to be suspended after sending signal
* Remove notes
* Add tracing span attribute log_reference_id to logs caused by rpc call
* Sync bitcoin wallet before initial max_giveable call
* use Span::current() to pass down to tracing span to spawned tasks
* Remove unused shutdown channel
* Add `get_monero_recovery_info` RPC endpoint
- Add `get_monero_recovery_info` RPC endpoint
- format PrivateViewKey using Display
* Rename `Method::RawHistory` to `Method::GetRawStates`
* Wait for swap to be suspended after sending signal
* Return additonal info on GetSwapInfo
* Update wallet.rs
* fix compile issues for tests and use serial_test crate
* fix rpc tests, only check for RPC errors and not returned values
* Rename `get_raw_history` tp `get_raw_states`
* Fix typo in rpc server stopped tracing log
* Remove unnecessary success property on suspend_current_swap response
* fixing test_cli_arguments and other tests
* WIP: RPC server integration tests
* WIP: Integration tests for RPC server
* Update rpc tests
* fix compile and warnings in tests/rpc.rs
* test: fix assert
* clippy --fix
* remove otp file
* cargo clippy fixes
* move resume swap initialization code out of spawned task
* Use `in_current_span` to pass down tracing span to spawned tasks
* moving buy_xmr initialization code out of spawned tasks
* cargo fmt
* Moving swap initialization code inside tokio select block to handle swap lock release logic
* Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr
* Spawn event loop before requesting quote
* Release swap lock after receiving shutdown signal
* Remove inner tokio::select in BuyXmr and Resume
* Improve debug text for swap resume
* Return error to API caller if bid quote request fails
* Print error if one occurs during process invoked by API call
* Return bid quote to API caller
* Use type safe query! macro for database retrieval of states
* Return tx_lock_fee to API caller on GetSwapInfo call
Update request.rs
* Allow API caller to retrieve last synced bitcoin balane and avoid costly sync
* Return restore height on MoneroRecovery command to API Caller
* Include entire error cause-chain in API response
* Add span to bitcoin wallet logs
* Log event loop connection properties as tracing fields
* Wait for background tasks to complete before exiting CLI
* clippy
* specify sqlx patch version explicitly
* remove mem::forget and replace with _guard
* ci: add rpc test job
* test: wrap rpc test in #[cfg(test)]
* add missing tokio::test attribute
* fix and merge rpc tests, parse uuuid and multiaddr from serde_json value
* default Tor socks port to 9050, Cargo fmt
* Update swap/sqlite_dev_setup.sh: add version
Co-authored-by: Byron Hambly <byron@hambly.dev>
* ci: free up space on ubuntu test job
* Update swap/src/bitcoin/wallet.rs
Co-authored-by: Byron Hambly <byron@hambly.dev>
* Update swap/src/bitcoin/wallet.rs
Co-authored-by: Byron Hambly <byron@hambly.dev>
* fmt
---------
Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com>
Co-authored-by: Byron Hambly <byron@hambly.dev>
- upgrades to bdk 0.24 #1198
- adds a regression test for opening older wallets #1183
- adds a migration for older wallets that encounter the ChecksumMismatch
error #1182
- bdk to 0.22.0 #1126
- ecdsa_fun to 7c3d592 #1127
- sigma_fun to 7c3d592 #1128
- sha2 to 0.10.2 #948
- serde to 1.0.144 #1115
- bitcoin-harness to bff9a64
Revert "ci: specify previous dprint version until fixed"
This reverts commit 11eb1737ce.
This commit updates the rust-toolchain to the current stable version
1.59, and fixes a number of new clippy warnings from that change.
Other changes:
- updates backoff to 0.4
- updates swap to 2021 edition
- updates comfy-table to 5.0
- updates monero-wallet to 2021 edition
- updates moneor-harness to 2021 edition
- updates bdk and rust_decimal
- updates tokio-util to 0.7
- updates workflow to use actions/setup-python@3
- updates pem and serde_with
- adds stable rust toolchain notice to readme
1. Clearly separate the log messages from any fields that are
captured. The log message itself should be meaningful because it
depends on the underlying formatter, how/if the fields are displayed.
2. Some log messages had very little context, expand that.
3. Wording of errors was inconsistent, hopefully all errors should
now start with `Failed to ...`.
4. Some log messages were duplicated across multiple layers (like opening
the database).
5. Some log messages were split into two where one part is now an `error!`
and the 2nd part is an `info!` on what is happening next.
6. Where appropriate, punctuation has been removed to not interrupt
the reader's flow.
Forcing the user to create an implementation of `EstimateFeeRate`
every time they want to create a wallet for testing is tedious and
leads to duplicated code.
The implementation for tests is rarely dynamic and thus can be
simplified to static arguments.
This also allows us to provide convenience constructors to make tests
that don't care about fees less distracting by reducing the number of
constants that are floating around.
Electrum has an estimate-fee feature which takes as input the block you want a tx to be included.
The result is a recommendation of BTC/vbyte.
Using this recommendation and the knowledge about the size of our transactions we compute an appropriate fee.
The size of the transactions were taken from real transactions as published on bitcoin testnet.
Note: in reality these sizes might fluctuate a bit but not for much.
Alice chooses the fee for TxPunish because she is the one that cares.
Bob chooses the fee for TxRefund because he is the one that cares.
Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
Alice chooses the fee for TxRedeem because she is the one that cares. Note must be taken here because if the fee is too low (e.g. < min tx fee) then she might not be able to publish TxRedeem at all.
In order for the re-construction of TxLock to be meaningful, we limit
`Message2` to the PSBT instead of the full struct. This is a breaking
change in the network layer.
The PSBT is valid if:
- It has at most two outputs (we allow a change output)
- One of the outputs pays the agreed upon amount to a shared output script
Resolves#260.
This allows us to construct instances of bitcoin::Wallet for test
purposes that use a different blockchain and database implementation.
We also parameterize the electrum-client to make it possible to
construct a bitcoin::Wallet for tests that doesn't have one. This
is necessary because the client validates the connection as it is
constructed and we don't want to provide an Electrum backend for
unit tests.
We have a repeated pattern where we construct one of our
Tx{Cancel,Redeem,Punish,Refund,Lock} transactions and wait until
the status of this transaction changes. We can make this more
ergonomic by creating and implementing a `Watchable` trait that
gives access to the TxId and relevant script for this transaction.
This allows us to remove a parameter from the `watch_until_status`
function.
Additionally, there is a 2nd pattern: "Completing" one of these
transaction and waiting until they are confirmed with the configured
number of blocks for finality. We can make this more ergonomic by
returning a future from `broadcast` that callers can await in case
they want to wait for the broadcasted transaction to reach finality.
We achieve our optimizations in three ways:
1. Batching calls instead of making them individually.
To get access to the batch calls, we replace all our
calls to the HTTP interface with RPC calls.
2. Never directly make network calls based on function
calls on the wallet.
Instead, inquiring about the status of a script always
just returns information based on local data. With every
call, we check when we last refreshed the local data and
do so if the data is considered to be too old. This
interval is configurable.
3. Use electrum's notification feature to get updated
with the latest blockheight.
Co-authored-by: Thomas Eizinger <thomas@eizinger.io>
Co-authored-by: Rishab Sharma <rishflab@hotmail.com>
This reduces the overall amount of LoC that imports take up in our
codebase by almost 100.
It also makes merge-conflicts less likely because there is less
grouping together of imports that may lead to layout changes which
in turn can cause merge conflicts.
These traits were only used once within the `TxLock` constructor.
Looking at the rest of the codebase, we don't really seem to follow
any abstractions here where the protocol shouldn't know about the
exact types that is being passed in.
As such, these types are just noise and might as well be removed in
favor of simplicity.
To achieve this we also:
- upgrade rust-bitcoin to 0.26
- upgrade bitcoin-harness to latest version (which also depends bitcoin 0.26)
- upgrade to latest edcsa-fun
- replace cross_curve_dleq proof with sigma_fun (to avoid an upgrade dance over there)
The bitcoind wallet required the user to run a bitcoind node. It was replaced with a bdk wallet which allows the user to connect to an electrum instance hosted remotely. An electrum and bitcoind testcontainer were created to the test the bdk wallet. The electrum container reads the blockdata from the bitcoind testcontainer through a shared volume. bitcoind-harness was removed as bitcoind initialisation code was moved into test_utils. The bdk wallet differs from the bitcoind wallet in that it needs to be manually synced with an electrum node. We synchronise the wallet once upon initialisation to prevent a potentially long running blocking task from interrupting protocol execution. The electrum HTTP API was used to get the latest block height and the transaction block height as this functionality was not present in the bdk wallet API or it required the bdk wallet to be re-synced to get an up to date value.
To allow the related timelock to be defined with the
transaction that uses it. This will allow the access to the
timelock's struct inner field with defining `From` impl.