xmr-btc-swap/swap/sqlx-data.json

227 lines
5.9 KiB
JSON
Raw Permalink Normal View History

2021-09-20 19:14:33 -04:00
{
"db": "SQLite",
"081c729a0f1ad6e4ff3e13d6702c946bc4d37d50f40670b4f51d2efcce595aa6": {
"describe": {
"columns": [
{
"name": "peer_id",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
"parameters": {
"Right": 1
}
},
"query": "\n SELECT peer_id\n FROM peers\n WHERE swap_id = ?\n "
2021-09-20 19:14:33 -04:00
},
"0ab84c094964968e96a3f2bf590d9ae92227d057386921e0e57165b887de3c75": {
"describe": {
"columns": [],
"nullable": [],
2021-09-20 19:14:33 -04:00
"parameters": {
"Right": 2
}
},
"query": "\n insert into peer_addresses (\n peer_id,\n address\n ) values (?, ?);\n "
2021-09-20 19:14:33 -04:00
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"0d465a17ebbb5761421def759c73cad023c30705d5b41a1399ef79d8d2571d7c": {
"describe": {
"columns": [
{
"name": "start_date",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
true
],
"parameters": {
"Right": 1
}
},
"query": "\n SELECT min(entered_at) as start_date\n FROM swap_states\n WHERE swap_id = ?\n "
},
2021-09-20 19:14:33 -04:00
"1ec38c85e7679b2eb42b3df75d9098772ce44fdb8db3012d3c2410d828b74157": {
"describe": {
"columns": [
{
"name": "swap_id",
"ordinal": 0,
"type_info": "Text"
},
{
"name": "state",
"ordinal": 1,
"type_info": "Text"
}
],
"nullable": [
false,
false
],
"parameters": {
"Right": 0
}
},
"query": "\n SELECT swap_id, state\n FROM (\n SELECT max(id), swap_id, state\n FROM swap_states\n GROUP BY swap_id\n )\n "
2021-09-20 19:14:33 -04:00
},
"2a356078a41b321234adf2aa385b501749f907f7c422945a8bdda2b6274f5225": {
"describe": {
"columns": [],
"nullable": [],
2021-09-20 19:14:33 -04:00
"parameters": {
"Right": 2
}
},
"query": "\n insert into peers (\n swap_id,\n peer_id\n ) values (?, ?);\n "
2021-09-20 19:14:33 -04:00
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"3f2bfdd2d134586ccad22171cd85a465800fc5c4fdaf191d206974e530240c87": {
"describe": {
"columns": [
{
"name": "swap_id",
"ordinal": 0,
"type_info": "Text"
},
{
"name": "state",
"ordinal": 1,
"type_info": "Text"
}
],
"nullable": [
false,
false
],
"parameters": {
"Right": 0
}
},
"query": "\n SELECT swap_id, state\n FROM swap_states\n "
},
2021-09-20 19:14:33 -04:00
"50a5764546f69c118fa0b64120da50f51073d36257d49768de99ff863e3511e0": {
"describe": {
"columns": [],
"nullable": [],
2021-09-20 19:14:33 -04:00
"parameters": {
"Right": 2
}
},
"query": "\n insert into monero_addresses (\n swap_id,\n address\n ) values (?, ?);\n "
2021-09-20 19:14:33 -04:00
},
"88f761a4f7a0429cad1df0b1bebb1c0a27b2a45656549b23076d7542cfa21ecf": {
"describe": {
"columns": [
{
"name": "state",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
"parameters": {
"Right": 1
}
},
"query": "\n SELECT state\n FROM swap_states\n WHERE swap_id = ?\n ORDER BY id desc\n LIMIT 1;\n\n "
2021-09-20 19:14:33 -04:00
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"b703032b4ddc627a1124817477e7a8e5014bdc694c36a14053ef3bb2fc0c69b0": {
"describe": {
"columns": [],
"nullable": [],
"parameters": {
"Right": 3
}
},
"query": "\n insert into swap_states (\n swap_id,\n entered_at,\n state\n ) values (?, ?, ?);\n "
},
"ce270dd4a4b9615695a79864240c5401e2122077365e5e5a19408c068c7f9454": {
2021-09-20 19:14:33 -04:00
"describe": {
"columns": [
{
"name": "address",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
"parameters": {
"Right": 1
}
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"query": "\n SELECT address\n FROM monero_addresses\n WHERE swap_id = ?\n "
2021-09-20 19:14:33 -04:00
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"d78acba5eb8563826dd190e0886aa665aae3c6f1e312ee444e65df1c95afe8b2": {
2021-09-20 19:14:33 -04:00
"describe": {
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"columns": [
{
"name": "address",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
2021-09-20 19:14:33 -04:00
"parameters": {
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"Right": 1
}
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"query": "\n SELECT DISTINCT address\n FROM peer_addresses\n WHERE peer_id = ?\n "
2021-09-20 19:14:33 -04:00
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"e05620f420f8c1022971eeb66a803323a8cf258cbebb2834e3f7cf8f812fa646": {
2021-09-20 19:14:33 -04:00
"describe": {
"columns": [
{
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"name": "state",
2021-09-20 19:14:33 -04:00
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
"parameters": {
"Right": 1
}
},
RPC server for API Interface (#1276) * saving: implementing internal api shared by cli and rpc server * writing async rpc methods and using arc for shared struct references * cleaning up, renamed Init to Context * saving: cleaning up and initial work for tests * Respond with bitcoin withdraw txid * Print RPC server address * Cleanup, formatting, add `get_seller`, `get_swap_start_date` RPC endpoints * fixing tests in cli module * uncommenting and fixing more tests * split api module and propagate errors with rpc server * moving methods to api and validating addresses for rpc * add broadcast channel to handle shutdowns gracefully and prepare for RPC server test * added files * Update rpc.rs * adding new unfinished RPC tests * updating rpc-server tests * fixing warnings * fixing formatting and cargo clippy warnings * fix missing import in test * fix: add data_dir to config to make config command work * set server listen address manually and return file locations in JSON on Config * Add called api method and swap_id to tracing for context, reduced boilerplate * Pass server_address properly to RpcServer * Update Cargo.lock * dprint fmt * Add cancel_refund RPC endpoint * Combine Cmd and Params * Disallow concurrent swaps * Use RwLock instead of Mutex to allow for parallel reads and add get_current_swap endpoint * Return wallet descriptor to RPC API caller * Append all cli logs to single log file After careful consideration, I've concluded that it's not practical/possible to ensure that the previous behaviour (one log file per swap) is preserved due to limitations of the tracing-subscriber crate and a big in the built in JSON formatter * Add get_swap_expired_timelock timelock, other small refactoring - Add get_swap_expired_timelock endpoint to return expired timelock if one exists. Fails if bitcoin lock tx has not yet published or if swap is already finished. - Rename current_epoch to expired_timelock to enforce consistent method names - Add blocks left until current expired timelock expires (next timelock expires) to ExpiredTimelock struct - Change .expect() to .unwrap() in rpc server method register because those will only fail if we register the same method twice which will never happen * initiating swaps in a separate task and handling shutdown signals with broadcast queues * Replace get_swap_start_date, get_seller, get_expired_timelock with one get_swap_info rpc method * WIP: Struct for concurrent swaps manager * Ensure correct tracing spans * Add note regarding Request, Method structs * Update request.rs * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Remove notes * Add tracing span attribute log_reference_id to logs caused by rpc call * Sync bitcoin wallet before initial max_giveable call * use Span::current() to pass down to tracing span to spawned tasks * Remove unused shutdown channel * Add `get_monero_recovery_info` RPC endpoint - Add `get_monero_recovery_info` RPC endpoint - format PrivateViewKey using Display * Rename `Method::RawHistory` to `Method::GetRawStates` * Wait for swap to be suspended after sending signal * Return additonal info on GetSwapInfo * Update wallet.rs * fix compile issues for tests and use serial_test crate * fix rpc tests, only check for RPC errors and not returned values * Rename `get_raw_history` tp `get_raw_states` * Fix typo in rpc server stopped tracing log * Remove unnecessary success property on suspend_current_swap response * fixing test_cli_arguments and other tests * WIP: RPC server integration tests * WIP: Integration tests for RPC server * Update rpc tests * fix compile and warnings in tests/rpc.rs * test: fix assert * clippy --fix * remove otp file * cargo clippy fixes * move resume swap initialization code out of spawned task * Use `in_current_span` to pass down tracing span to spawned tasks * moving buy_xmr initialization code out of spawned tasks * cargo fmt * Moving swap initialization code inside tokio select block to handle swap lock release logic * Remove unnecessary swap suspension listener from determine_btc_to_swap call in BuyXmr * Spawn event loop before requesting quote * Release swap lock after receiving shutdown signal * Remove inner tokio::select in BuyXmr and Resume * Improve debug text for swap resume * Return error to API caller if bid quote request fails * Print error if one occurs during process invoked by API call * Return bid quote to API caller * Use type safe query! macro for database retrieval of states * Return tx_lock_fee to API caller on GetSwapInfo call Update request.rs * Allow API caller to retrieve last synced bitcoin balane and avoid costly sync * Return restore height on MoneroRecovery command to API Caller * Include entire error cause-chain in API response * Add span to bitcoin wallet logs * Log event loop connection properties as tracing fields * Wait for background tasks to complete before exiting CLI * clippy * specify sqlx patch version explicitly * remove mem::forget and replace with _guard * ci: add rpc test job * test: wrap rpc test in #[cfg(test)] * add missing tokio::test attribute * fix and merge rpc tests, parse uuuid and multiaddr from serde_json value * default Tor socks port to 9050, Cargo fmt * Update swap/sqlite_dev_setup.sh: add version Co-authored-by: Byron Hambly <byron@hambly.dev> * ci: free up space on ubuntu test job * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * Update swap/src/bitcoin/wallet.rs Co-authored-by: Byron Hambly <byron@hambly.dev> * fmt --------- Co-authored-by: binarybaron <86064887+binarybaron@users.noreply.github.com> Co-authored-by: Byron Hambly <byron@hambly.dev>
2024-05-22 09:12:58 -04:00
"query": "\n SELECT state\n FROM swap_states\n WHERE swap_id = ?\n "
},
"e36c287aa98ae80ad4b6bb6f7e4b59cced041406a9db71da827b09f0d3bacfd6": {
"describe": {
"columns": [],
"nullable": [],
"parameters": {
"Right": 2
}
},
"query": "\n INSERT INTO buffered_transfer_proofs (\n swap_id,\n proof\n ) VALUES (?, ?);\n "
},
"e9d422daf774d099fcbde6c4cda35821da948bd86cc57798b4d8375baf0b51ae": {
"describe": {
"columns": [
{
"name": "proof",
"ordinal": 0,
"type_info": "Text"
}
],
"nullable": [
false
],
"parameters": {
"Right": 1
}
},
"query": "\n SELECT proof\n FROM buffered_transfer_proofs\n WHERE swap_id = ?\n "
2021-09-20 19:14:33 -04:00
}
}