veilid/CHANGELOG.md

263 lines
12 KiB
Markdown
Raw Normal View History

2024-10-23 19:27:34 -04:00
**Changed in Veilid 0.4.1**
- Implement top level event bus to do asynchronous lock-free communication between subsystems
- Fix deadlock in socket address change event
- Fix deadlock in peer info change event
- Fix incorrect node info equivalence check
- Ping relays every second instead of every 10 seconds
- MR !328 'tiny improvements'
2024-10-19 13:10:27 -04:00
**Changed in Veilid 0.4.0**
- RFC-0001: Constrain DHT Subkey Size, issue #406
2024-10-10 20:16:39 -04:00
- Dialinfo detection issues:
- Add a publish() as well as a commit() for routing domain editor
- Should only publish our peer info after we're sure we done editing it (end of public address detection task)
- Publish should happen after relay selection as well
- Publish should happen if the relay's peerinfo has changed
- Publish should not do anything if the peerinfo hasn't changed
- PeerInfo -> Arc<PeerInfo> everywhere to minimize deep clones and ensure read-only PeerInfo
- Routing domain editing is now more atomic
- When a node selects a relay it now immediately protects its connections.
- Made dial info port (for port restricted nat) more resilient to changes, in the case there are multiple mappings
- Relays that drop protected connections should be deprioritized for relay selection (table saturation detection)
- clear_network_callback in do_public_dial_info_check is a kludge, removed
- Raised the bar for dialinfo changes when its just the port
- Pinging node on the same network works again
- resolve_node() never returns a dead node even when we want to try to communicate with it again
- Removed 'bad public address' detection as it wasn't working anyway
- Added separate parallelism lanes for relay keepalive pings from peer liveness check pings, as they are higher priority
- Change send_data to always check cache for contact method first instead of going with filtered active flows first, avoids choosing UDP when a preferable TCP connection could be made
- Nodes that are not relay capable should drop relayed packets
- DHT issues:
- Make setvalue more likely to succeed by accepting a getvalue consensus if a full setvalue consensus is not reached.
- Offline subkey writes are cleared too fast and should be thought as 'subkeys not yet synchronized'
- If set_value is partial / in-flight, it should still be in offline_subkey_writes
- Make inflight_subkey_writes list and probably some bit for 'written_while_inflight' so we dont clear the offline_subkey_writes until they're really written
- Networking:
- Fix TIME_WAIT states on Windows
- Attempt to give priority to relaying flows
- UI:
- Make veilid-cli display the connection state when reconnecting, and exit more cleanly on ctrl-c
2024-10-19 13:10:27 -04:00
- Added 'uptime' veilid-cli debug command
- Misc:
- Fixes for python DHT test
2024-10-10 20:16:39 -04:00
- API Additions:
- VeilidConfigInner::new parameteriztion for easier config from rust apps
- Remove veilid-server specific paths from veilid-core defaults
- Lots more stats about node performance in PeerStats
2024-10-19 13:10:27 -04:00
- Uptime stats in VeilidStateAttachment/VeilidUpdateAttachment, issue #317
2024-10-10 20:16:39 -04:00
**Changed in Veilid 0.3.4**
- Crates updates
- Update crates to newer versions
- Remove veilid-async-tungstenite and veilid-async-tls crates as they are no longer needed
- Fix startup/shutdown/attach/detach
- Improved resource accounting
- Locked startup/shutdown mechanism
- Perfetto profiler output for ui.perfetto.dev
- SO_LINGER(0) re-enabled to eliminate TIME_WAIT on restart/detach/attach
(this may cause noise for WASM in browsers when websockets are RST dropped rather than handshake closed, we will deal with this later)
- _Community Contributions_
- prototype script to install / run a veilid-server node within a unifyos device (tested on a unify dream machine pro SE) @Vyrus-001
2024-07-07 13:27:55 -04:00
**Changed in Veilid 0.3.3**
- Fix set_dht_value and watch_value
- Watching values incorrectly categorized 'owner' keys as anonymous watchers
- Setting a dht value with the same sequence number as what is on the network, but with a conflicting value, did not result in the current value being returned to the api caller as it should have been
- DHT cleanup
- Proper application of DHT capabilities
- Fanout debugging log target
- Performance measurement / timing of veilid_api log target
- Fix DHT Rust integration test
- ValueChanged Optional
- Allow value changed data to be optional in rpc schema
- Make valuechanged update no longer happen when value hasn't changed or is older
- Implement closest peers refresh
- Implement closest peers refresh. Closes issue #372.
- Find_self/find_target can use capability check
- Fix offline subkey write reporting to eliminate spurious notifications
- Add more detail to public address check
- Improved punishment and state
- Create 'reasons' for dead and unreliable states
- Make 'punished' its own state
- Closes issue #281
- Fixes an issue with reliable nodes being marked as 'dead' unjustly
- _Community Contributions_
- Fixed memory leak in Windows DNS resolver @kyanha
2024-04-28 18:26:27 -04:00
**Changed in Veilid 0.3.2**
- DHT optimization and bugfixes
- Support for offline write status in DHTRecordReport
- Fix deprecated functions
- Improve fanout seeding to ensure records are reached as quickly as possible
- Native IPV4-IPV6 bridging support
- fix bug where messages sent to a private route without a safety route would not receive replies
- fix verbose-tracing feature flag
- improve route allocation to avoid co-located nodes
- fix contact method for nodes on the same ipblock
- add support for maintaining AddressType-translation relays
- Removed NDK related hotfix, as this has been integrated into cargo-ndk already
- Open sourced the CICD build scripts
- Fixes for watchvalue
- Refactor low level network
2024-04-04 20:31:47 -04:00
**Changed in Veilid 0.3.1**
- DHT cleanup
- Proper application of DHT capabilities
- Fanout debugging log target
- Performance measurement / timing of veilid_api log target
- ValueChanged Optional
- Allow value changed data to be optional in rpc schema
- Make valuechanged update no longer happen when value hasn't changed or is older
- Clippy fixes and cleanup
- _Community Contributions_
- Changed VeilidAPI::parse_as_target to a sync function -- @sashanoraa
- fix dht rust integration test -- @ssurovsev
2024-03-27 22:03:46 -04:00
**Changed in Veilid 0.3.0**
- API BREAKING CHANGES:
- WatchValue RPC support
- InspectRecord RPC support
- RoutingContext now defaults to Reliable and EnsureOrdered modes
- generate_shared_secret added that abstracts DH and ensures domain separation
- Closed #357 - AppCall and AppMessage now have private route information
- Logging: Log facilities now can be enabled and disabled at runtime
- Logging: Log facility added for DHT, network results, and API calls
- CLI: Closed #358 - veilid-cli now has 'interactive' (-i), 'log viewer' (-l) and 'execute command' (-e) command line options
- Testing: veilid-flutter now has integration tests of its own that work like the veilid-python unit tests
- Network: Failures to hole-punch UDP or reverse-connect TCP or UDP now falls back to inbound relaying
- Bugfix: Signal handling for unix-like platforms was not handling SIGTERM correctly
- Bugfix: Restarting veilid-server quickly might result in failures to bind()
- Bugfix: Closed #359 - Block node identity from DHT record schema owner/writer
- Bugfix: Closed #355 - Fixed memory error reading macos/ios interfaces list
- _Community Contributions_
- Made private route allocation bidirectional by default @kyanha
- Use $CI_REGISTRY_IMAGE for the registry path @SalvatoreT
- Add VeilidConfigInner-based VeilidAPI startup @SalvatoreT
- rebrand trust-dns-resolver to hickory-resolver @kyanha
2023-11-06 19:27:23 -05:00
**Changed in Veilid 0.2.5**
- API BREAKING CHANGES:
- on `RoutingContext`: `with_privacy()` renamed to `with_default_safety()`
- on `RoutingContext`: `with_custom_privacy()` renamed to `with_safety()`
- on `RoutingContext`: `safety()` method added that returns the current `SafetySelection`
- Routing contexts are now safety-route-enabled by default. To disable, use `with_safety()` with `SafetySelection::Unsafe`.
- WASM now works better with updated connection manager code
- Async-std flavor of veilid-core now builds correctly again
- Safety route allocation is bidirectional
- Connection table LRU cache now has protection for relays and in-use RPC question/answers
- Dead route notifications are now sent only for manually allocated routes
- Allocated routes that fail tests now have their nodes marked as 'failure to send' so they go 'unreliable' and get re-tested. Also the same route will not immediately be reallocated as a result.
- DHT tests ported from Python to Rust
- Rustls updated to latest release
- Protected connections (such as relays) that drop result in marking the node as 'failure to send' so a different relay gets chosen
2023-10-14 23:16:05 -04:00
**Changed in Veilid 0.2.4**
- Fixed issue with client API failing when ipv6 was disabled
- Android fixed so it can move out of invalid network state
- Numerous WASM binding fixes
- IGD/UPNP fixes for Windows
- Reduce network downtime when local ip addresses change (ipv6 temporary addresses)
- Fix support for Android emulator
- Bootstrap is more robust in environments where some dialinfo won't work, like inbound UDP being firewalled off
- CLI has timestamps in the log output
- Base64 fixes for encoding
2023-10-15 12:12:41 -04:00
- IPv6 capability detection for native platforms
2023-10-14 23:16:05 -04:00
2023-09-17 14:04:33 -04:00
**Changed in Veilid 0.2.3**
- Security fix for WS denial of service
- Support for latest Rust 1.72
2023-09-16 16:59:54 -04:00
**Changed in Veilid 0.2.2**
- Capnproto 1.0.1 + Protobuf 24.3
- DHT set/get correctness fixes
- Connection table fixes
- Node resolution fixes
- More debugging commands (appmessage, appcall, resolve, better nodeinfo, etc)
- Reverse connect for WASM nodes
- Better Typescript types for WASM
- Various script and environment cleanups
- Earthly build for aarch64 RPM
- Much improved and faster public address detection
**Changes in Veilid 0.2.1**
- Crates are separated and publishable
- First publication of veilid-core with docs to crates.io and docs.rs
- Avoid large logs of 127.0.0.1:5959 attack payloads
- Use getrandom in WASM for RNG
- Increase privacy for WASM builds by rewriting internal paths
- Translations
- Fix python update schema script
- Earthfile cleanup
2023-09-02 09:51:22 -04:00
**Changes in Veilid 0.2.0**
- Rustdoc builds now
- API visibility changes
- Android JNI update
- Fix DHT record data housekeeping
- Public address detection improvement
- Manual port forwarding detection
- lock_api dependency fix
- DialInfo failover when some dial info does not work
2023-09-02 10:43:49 -04:00
Note: Windows builds may be broken in this release. Please test and let us know by opening an issue.
2023-09-02 09:51:22 -04:00
**Changes in Veilid 0.1.10**
- BREAKING CHANGE: ALL MUST UPDATE
* VLD0 now adds a BLAKE3 hash round on the DH output to further separate it from the raw key exchange
* Bootstraps are fixed now due to DH issue
- Windows crate update caused build and nul termination issues for DNS resolver
- Fix for network key on the veilid-server command line
- Strict verification for Ed25519 enabled
- Domain separation for VLD0 signing and crypt
2023-08-19 18:24:25 -04:00
**Changes in Veilid 0.1.9**
- SECURITY FIX
* DESCRIPTION: Decompression was occurring in an unbounded way upon envelope receipt.
* IMPACT: Node crashes resulting in downtime. There was no risk of RCE or compromise due to Rust's memory protections and no use of unsafe code near the site of the error.
* INDICATIONS: This resulted in an out-of-memory abort on nodes. Issue first identified on the bootstrap servers.
* REMEDIATION: Length check added to decompression on envelopes.
- Earthfile support for generating a debug executable
2023-08-18 21:18:30 -04:00
**Changes in Veilid 0.1.8**
- Fix Python Install Instructions
- Fix to get server version from crate
- Move dev setup into its own folder
- Setup support for Fedora
- Make submodule paths absolute
- veilid-flutter improvements for crypto and timestamp, and endianness bugfix
- Offline subkey writes for DHT
- Fix WASM compilation
- Improve server port allocation
- Add more punishments
- Clap derive refactor for command line args
- gitignore emacs backup files
- Various typos
- Fanout debugging for DHT
2023-07-30 17:22:47 -04:00
**Changes in Veilid 0.1.7**
- Fix for connection table crash
- Fix for incorrect set_dht_value return value
- Python test updates
- Various VeilidChat-prompted veilid-flutter updates
2023-07-22 16:28:05 -04:00
**Changes in Veilid 0.1.6**
- Fix for 'find_node' too many nodes returned issue
2023-07-21 16:47:52 -04:00
**Changes in Veilid 0.1.5**
- Added Changelog
- Fix detachment issue with suspending network interfaces during operation
- Fix incorrect punishment on relayed undecryptable messages
- Minor API feature adds
- Relay bugfixes